Providing public health services to Class IV employees staff quarters at Old University Campus

Amount

Providing and fixing white vitreous china pedestal type water closet (European type W.C Pan) with seat and lid, 10 liter low level white PVC flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. W.C Pan with ISI marked black solid plastic seat and lid (Make Parryware/ Hindware/ Cera/Kerovit)

Providing and fixing wash basin with C.I Brackets, 15mm, C.P Brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400mm with single 15mm C.P brass pillar tap (Make Parryware/ Hindware/Cera/Kerovit)

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings including cutting walls/floors and making good the same (Make Parryware/ Hindware/ Cera/Kerovit)

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT shelf 440mm long, 124mm width and 36mm height of approved quality, colour and make, weighing not less than 300 gms (Prayag Make).

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with C.P brass screws with concealed arrangements of approved quality and colour. 600 mm long with total length 645mm, 78 mm wide, height 88mm, weight not less than 190 gm (Prayag Make)

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height 75mmwith concealed fittings arrangements weighing not less than 106 gm (Prayag Make)

Providing and fixing PTMT Towel ring Trapezodial shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gm (Prayag Make).

Providing and fixing Salem Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40mm including painting of fitting & brackets & cutting & making good the walls wherever required 610x460mm & Bowl depth 200 mm including waste pipe.

P/F CP brass bib cock of approved make (Jaquar/Kerovit) 15mm nominal bore

P/F CP brass bib cock (long nose) of approved make (Jaquar/Kerovit) 15mm nominal bore

P/F CP brass angle valve for basin mixture Geyser points/washbasins of approved make (Jaquar/Kerovit) 15mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore (Jaquar/Kerovit make)

P/F of C.P. Brass extension nipple 50mm long & 15mm nom bore of approved make and quality as per the directions of the Engineer-in-charge.

P/F of C.P shower rose with 15/20 mm inlet including rod with necessary plugs and screws.150 mm dia

P/F Ball Valve (Full way valve) made of cast brass including handle: 15 mm nominal size of approved make

------------------do--------------------- 25 mm nominal size

P/F PTMT Ball cock of approved quality, colour and make with Epoxy coated aluminum rod with L.P/H.T H.D plastic balls (Prayag make) 25mm nominal bore, 152mm long weighing not less than 440 gm.

Providing and placing on terraces Polyethylene water storage tank ISI: 12701 marked with cover & suitable locking arrangement & making necessary holes for inlet outlet & overflow pipes but without fittings and the base support for tank (Sintex/Star/ Lotus make)

Providing and fixing G.I union in G.I pipe including cutting, threading the pipe and making long screws etc. Complete (New Work) 15 mm nominal bore of approved quality (ISI marked).

------do---------- 20 mm nominal bore

--------do-------- 25 mm nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings (sockets, elbow, tee) and clamps including cutting chases and making good the walls (medium grade) concealed / Exposed on wall (Make Jindal/Prakash Surya/Tata)15 mm dia nominal bore

-----------do------------- 20 mm dia nominal bore

-------------do----------- 25 mm dia nominal bore

-----------do------------- 32 mm dia nominal bore

Providing and fixing PVC pipes heavy duty 4 kg/cm2 (Make Supreme /Prince/ Finolex /Astral) including all fittings like tees, elbows, door tees, Couplers, P floor traps, plain bend, door tee, collars including jointing with seal rings/adhesive and testing of joints etc. complete in all respects as per directions of the Engineer-in-charge. Nothing extra shall be paid 80 mm dia

------------do----------- 110 mm dia

------------do------------ 160 mm dia

Encasing of PVC pipes 80 mm dia/110mm dia with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) all around the pipe as per standard design.

Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size) all around the PVC pipe including bed concrete as per standard design (150 mm thick all around). For 110 mm/160mm dia pipe

Providing and fixing 2 H.P water lifting motor including fixing of check valve of approved make Crompton/ Havells/Sharp)

Constructing brick masonry manhole in cement mortar 1:4 (1 cement: 4 coarse sand) with RCC top slab with 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plastering with 12mm thick cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design:-With common burnt clay F.P.S bricks of class designation 7.5 Inside size 90x80cm and 60cm deep including fixing Angle iron frame 50x50x6mm with hold fast and covered with precast RCC Manhole cover with cement concrete 1:2:4 of required size including cost of reinforcement as required.

---------do---------- Inside size 120x90cm and 90cm deep including fixing Angle iron frame 50x50x6mm with hold fast and covered with precast RCC Manhole cover with cement concrete 1:2:4 of required size including cost of reinforcement as required.

---------do---------- Inside size 90x80cm and 45cm deep including fixing Angle iron frame 50x50x6mm with hold fast and covered with precast RCC Manhole cover with cement concrete 1:2:4 of required size including cost of reinforcement as required.

Extra for depth for manhole of size 90x80 cm with common burnt clay FPS Bricks with class designation 7.5

-------do------- size 120x90cm with common burnt clay FPS bricks with class designation 7.5

P& F of CP grating 100 mm nominal dia

Earth work in excavation in all kinds of soil in foundation trenches pits and bulk evacuation including stacking soil neatly away from the edges, filling back by the sides of foundations in plinth in 150mm thick layers, ramming, watering and consolidation complete including disposal of surplus earth outside the University Campus. Nothing extra shall be paid on account of lead/lift and disposal of earth outside the University Campus

Providing and fixing M.S. holder bat clamp of approved design to PVC pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including cost of cutting holes and making good the walls etc. complete. For 75mm/110 mm dia pipe

Providing and fixing wash basin with C.I brackets, 15 mm C.P brass pillar taps (Make Jaquar/kerovit), 32 mm dia C.P Brass waste coupling of standard pattern including painting of fittings & brackets, cutting and making good the walls wherever required. White Vitreous China Flat back Wash basin of size 300 x 450 mm with a single 15 mm C.P brass pillar tap (Make Parryware/ Hindware/ Cera/Kerovit)

Cutting holes upto 30 cm x 30 cm in walls including making good the same with common burnt clay non-modular bricks with cement mortar 1:4 ( 1 cement : 4 sand).

Cutting holes upto 15cm x 15 cm in RCC Floors & Roofs for passing drain pipes etc and repairing the hole after inserting of drain pipe etc. With cement concrete 1:2:4 including finishing complete, so as to make it leak proof.

Providing and fixing square- mouth S.W. gully trap SP-I complete with C. I. grating brick masonry chamber with water tight C. I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design. 100mm x 100 mm size, P-Type with common burnt clay FPS bricks of class designation 7.5

Providing and fixing 8 mm dia C.P/S.S Jet with flexible tube upto 1 meter long with S.S triangular plate to European Type W.C of quality and make as approved by the Engineer-in-charge.

Providing and fixing unplasticised PVC connection pipe with brass unions 45 to 60 cm length as required, 15 mm nominal bore of approved quality.

P/F of PVC waste pipe for sink or wash basin including P.V.C. waste fitting complete Semi Rigid Pipe 32/40 mm dia of approved quality.

P/F of C. P. Pillar cock ‘Jaquar/KerovitMake’ 15 mm (nominal size)

M/S KAMA DEV SAMAL

M/S PARVEEN SINGH RAINA CONTRACTOR