Special Repair of Govt. Veterinary Hospital at Bawal in Rewari District.

Amount

Scraping (c) cement plaster (HSR 8.32 (C))

Providing and laying 80 mm thick interlocking paver block of all shapes and colours in design mix M-35 over bed of 30mm thick fine sand complete in all respect. [HSR 10.159]

First class brickwork laid in cement sand mortar 1:6 in first storey upto 4 meters above plinth level. [HSR 11.7]

12 mm thick cement plaster 1:6 (HSR 15.7)

Painting two coats with synthetic enamel paint in all shades on old wood-work or metallic or plastered or concrete surfaces to give an even shade including rubbing down old paint. (HSR 16.5)

Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surfaces. [HSR 16.25]

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60)

Providing two coats of exterior acrylic emulsion paint. (HSR 16.79) (a) 2nd Quality

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) (HSR 16.81)

Factory manufactured panelled door or glazed window, shutters of commercial hard wood, such as hollock, champ, chikrassy and chaplash etc. (non-conferous timber other than teak,conforming to I.S.specification No.1003,kiln-seasoned),with 100 mm wide verticle styles, 150 mm wide lock rail, 200 mm wide bottom rail and 100 mm wide other rails, with panels of 15 mm thick, tongued and grooved of commercial hard wood and including cost of iron hinges, screws, chocks/cleats, stops, nails etc., complete, fixed in position (excluding the cost of any fittings,other than specified above,but including labour for fixing the same in position). [HSR 17.90 a]

Factory manufactured Solid Flush Door Shutter, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hotpressed, conforming to I.S. 2202 part I and II, fixed in position, including iron hinges, screws, chocks / cleats and stops etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same position. (Make: Duro, Green, Kitply) (HSR 17.93 (a) - Note 1 under 17.18) (iii) 35mm thick.

Providing and laying 75/100mm thick GRANULAR SUB BASE consisting of filter / Drainage layer conforming to Table 400.1 Grading – III / VI of MoRT&H 5th Edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No: 401 of MoRT&H specifications.

Earth work non plastic under floors / road & parking with tibba sand taken from outside of campus area with all lead and lift including loading, unloading, laid in 15 cm layer including ramming, watering, consolidating, compaction, and compensation of earth etc., complete in all respect as per the direction of engineer in charge. (For any lead and lift).(NS)

M/s Shree Laxmi Trading Company

Hari Singh