BMSICL/Infra/09/2026 GR-02, CONSTRUCTION OF 30 BEDDED CHC AT MOKAMA, PATNA

ABSTRACT OF COST FOR CIVIL, PHE & ELECTRICAL WORKS (SCHEDULE ITEMS)

Construction of 30 Bedded CHC at Mokama, Patna

BASED ON S.O.R. B.C.D.GOVT. OF BIHAR EFFECTIVE FROM 01/01/2022/MR

SUBHEAD-A(SOR ITEMS)

galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.

Carriage of Materials with loading & unloading:-

Bricks 100A(local lead 1K+7P)

Coarse sand lead of 1+84 KM from Doriganj

Stone chips lead of 371 KM from Pakur by Rail + 5 km By Road

Local Sand ( Lead local 1K+2P)

Difference Cost of materials :-

Bricks 100A

Cement(PSC)

PHE WORKS

C.P.V.C PIPES

Concealed work, including cutting chases and making good the walls etc.

C.P. BRASS FITTINGS

RAIN WATER PIPE

Liquid Dimension 4800X1800X1500 cu-m

(X).PIPE & CATCH PIT

(Y)FILTER PIT & RECHARGE WELL(2-nos.)

Add 5.36 % GST on A (as per 03/2022 Central Tax Rate)

ELECTRICAL ITEMS

WIRING

Supplying & fixing of following size medium class PVC conduit along with accessories in surface/ recess including cutting of wall and making good the same in case of recessed conduit as required.

Supplying and fixing metal/ PVC box of following sizes ( nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

Supplying and fixing following size / modules, GI box along with modular base & cover plate for modular switches/ socket/TV / Telephone outlet in surface/ recess etc. as required.

MAIN PANEL & D.B.s

Supplying and fixing cable end box ( Loose wire box , IP 43) suitable for following sheet steel M.C.B. Distribution board, on surface/ recess, complete with testing commissioning etc. as required

Supplying and fixing following ways, surface/recess mounting, vertical three phase distribution board (VTPN DBs) CRCA sheet steel ,dust protected duly powder painted suitable for upto 160 Amp four pole MCCB as incomer and SP/TP MCBs as outgoing , inclusive of tinned copper busbar, common neutral link , earth bar, din bar , for mounting MCB's etc. as required, (but without MCCB & MCB's )

Providing and fixing of following rating breaking capacity and pole MCCB with thermomagnetic release and terminal spreader in the existing Verticle DB as incomer including drilling holes in if required, making connections etc. as required .

Supplying and fixing of following rating C series MCB suitable for inductive and other loads of following poles in the existing MCB DB complete witth connections ,testing and commissioning etc. as required .

MAIN L.T. PANEL

Providing and fixing of following rating electrical items in existing cubical panel including drilling holes in if required, making connections etc. as required .

Incomings:-

Out going

EARTHING

SUPPLY & INSTALLATION OF FIXTURES

Supplying and fixing following types lamp in existing electrical fitting/ fixture etc as required.

SUPPLY & LAYING OF UNDER GROUND CABLE

Supply of PVC insulated PVC sheathed aluminium conductor armoured under ground cable of graded 1.1 KV for working voltage upto 1100 volts conforming to ISI 1554 (Part-I) of 1964 with upto date amendment as detailed below.

Laying of one number PVC insulated and PVC sheathed/ XLE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushionig, protective covering and refilling the trench etc. as required.

Laying of one number additional PVC insulated and PVC sheathed/ XLE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horzintal formation including excavation, sand cushionig, protective covering and refilling the trench etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed aluminium conductor cable of1.1 KV grade of following size on surface etc. as required.

Supplying and laying following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930 Part II complete with fitting and cutting, jointing etc.in the existing trench, complete as required .

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as reguired.

EXTERNAL ELECTRIFICATION

Supplying & embedding of following dia G.I. pipe (medium class) in pole collor / foundation (during casting ) for cable entry including bending the pipe to the required shape complete etc. as required.

TOTAL SI ITEMS

Construction of 30 Bedded CHC at Mokama, Patna

NAME OF FIRM

ADDRESS OF FIRM

SUBHEAD-B (NON-SCHEDULE ITEMS)

MS Louvers

40 mm thick with 20 mm nominal size stone aggregate

PHE ITEMS

P.V.C. PIPE

ANALYSIS

ANALYSIS 1(a)

P.V.C. FITTINGS

ANALYSIS

ANALYSIS

ANALYSIS

ANALYSIS

ANALYSIS

ANALYSIS

ELECTRICAL ITEMS

FIRE FIGHTING WORKS

Capacity 4.5 kg

Capacity 6 Kg.

Providing and fixing mechanical foam type Trolley Mounted Fire Extinguisher of bearing to IS:10568/IS13385/IS13386 with dis

Capacity 50 Lit.

Providing and fixing Carbon Dioxide Type Trolley Mounted Fire Extinguisher of as per IS: 2878 with discharge time of 10 to 20 sec/15 to 36sec/20 to 60sec respectively.

22.5 Kg. CO2 Fire Extinguisher

FURNITURE WORKS

Hospital sheet Patient Bed Type - III with mattress

All powder coated parts in RAL white Performance Specifications: Maximum patient load should be 135 kg Thickness-Mattress: 3"+ SANDWITCH CONSTRUCTION: Round corners - YES Hitlon thickness ( MM): 60 Hitlon density (Gm/dcm3): 23 Coir(Both side) Thickness MM: 20 Density (Gm/dcm3): 70, DRC (%): 22 QUILTING - COMBINATION / LAYERS: Pilled Foam – Quilting (One Side) Thickness MM - 14 Pilled Foam Density Gm/dcm3 - 18 PU foam / EPE sheet side walling Thickness MM - 3 TOTAL MATTRESS THICKNESS-MM - 87 REXINE (GSM): 150 Note: * Finish product thickness should be measure from outer to outer surface. Tolerance +5 mm

Patient Bed Type - I (Semi Fowler) with mattress

5. Handle PPCO Snap Locking Handle lever with handle body keep it in folding position when not use. 6. Lying Surfaces CRCA 1.0 mm Laying Surface area consists of mattress ratainer to define the position of the mattress. 7. Castors High endurance metal series castor and provided with dual locking arrangement are diagonally placed wheel Dia 125mm & Stem dia is 22mm. Diagonal locking provides better s stability to bed in the locked position. 8. Mosquito Net Ple Holder: Privision for mounting of mosquito net pole. 9. IV Pole Holder: Provision for mounting of IV pole

examination couch Type - II

Slotted Angle Rack Type -I

Will have 6 bends & get bolted to the Angles at each of the four corners according to Minimum of 100 Kg load per level. Corner Plates (Gussets): Material Specs IS 513D.8 Corner Plates, four on each face shall be fitted to the open type rack. Four corner plates shall be fitted to the front face in case of closed type racks. They shall be made of mild steel sheet and be provided with a black powder coated finish. Corner Plates of 1.6 mm thickness to be provided for ensuring rigidity of the structure. Nuts & Bolts:All fasteners like nuts, bolts, clips etc shall be supplied in galvanised condition for protection against environment and corrision

CHC MOIC Desk Type -VII

Desk Type -X

Computer Table

Foot Step Type -1

Instrument Trolley Type -1

Medicine Trolley Type -I

Oxygen Cylinder Trolley Type -I

Saline Stand Type -I

Round Stool Type -I

Strecher on Trolley Type - I

Chair Type V

Chair Type III

PNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment stroke of 12.0 cm. 6) TELESCOPIC BELLOW ASSEMBLY : The bellow is 3 piece telescopic type and injection moulded in black Polypropylene. 7) PEDESTAL ASSEMBLY : The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia. (76.0 cm with castors.) 8) TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.

Cupboard Type -II

Wheel Chair Type - I

Chair Type -XIV

Chair Type I

OT Table

Functional Specification: 1. Height adjustment - 730mm to 1020mm from Floor to mattress Top (Motorised), 2. Trendelenburg/Rev.Trendeleburg - 30˚ / 30˚(Motorised), 3. Lateral tilt - 21˚ / 21˚(Motorised), 4. Back rest (Up / Dn - from Horizontal) - 70˚ UP/ 50˚ DN (Motorised), 5. Leg rest - Flat, 6. Head rest (Up / Dn - from Horizontal) - 45˚ UP/ 45˚ DN (Manual), 7. Leg rest abduction (Left / Right) - 0˚ - 90˚ (Manual), 8. Maximum patient Load - 200 Kgs, 9. Power supply - 220 V, 5 Amp, 50 Hz, 10. Battery Back-up - Provided fitted with OT table as emergency power back for resetting the positions., 11. Lithotonomy crutches-Adjustable along Rod Axis, Rotation 360˚ around road Axis, Crutch pad adjustable in swivel joint. Material Specification: 1. Base Assembly - Aesthetically and scientifically designed T-Shape Heavy structure made of Ms Sheet flat and MS Casting with Zinc plating finish., Base is counter balanced for stability and structure is cover with 1.6mm thick SS 304 Fabricated sheet.,

2. Column Assembly - Column is designed for self-lubricating, weldless, joint less and jerkless with high load carrying capacity.Column made by SS casting and complete assembly covered with SS 304 Fabricated sheet., 3. Table top Assembly-Top frame structure is made of SS 304 tubular frame of section 50mmX50mmX3mm Thk, 4. X-Ray Translucent top - X-Ray Translucent compressed laminate platform are provided on all sections of mattress support frame., 5. Matress - Molded Polyurethane foam mattress of density 55 Kg/Cu.m, Stitchless molded PU mattress ensure sterility and comfort, Mattresses are supported by 10mm Bakelite sheet., 6. Castor - Polyurethane twin wheel non-marking central lock heavy duty castor of wheel dia 100mm to suit the application of OT table.,

7. Actuators and Control - Back rest , Height adjustment, Trendelenburg and Lateral Tilt are operated by linear actuator of Ti-Motion make.Actuators works on powder 24VDC with duty cycle - 10% Legrest and Headrest are operated manually & Height adjustment, Backrest, Trendelenburg and Lateral tilt on actuator, 8. Crutches - Lithotomy crutches made of SS 304 Rod and molded polyurethane with ergonomic calf rest profile to suit the Operation table application. Finish Specification: 1. All SS parts - Glossy buff finish, 2. All MS Parts - Zinc plated, 3. Mattresses - Black color (molded), 4. Flexible bellow - Black color (Neoprene), 5. Calf pad - Black color (Molded) Compliances: CE, ISO 13485 & ISO 9001

Delivery Table

Material Specification: 1. Understructure - SS 304, ERW tube - section size -50 x 25 x thickness- 1.2mm, 2. Mattress support platform - Frame made of SS304 ERW tube of dia 20x20x1.2mm thickness and SS 304 sheet of 1.2mm thickness, 3. Side rail and Head rail - SS 304, ERW tube - section size-dia 16x1.2 mm thick. 4. Matress - Polyurethane foam, Mattress cover - Rexin., 5. Leg shoe - Material - nylon , Color - black. 6. Crutches - Lithotomy crutches made of SS 304 Rod and molded polyurethane with ergonomic calf rest profile to suit the Operation table application., 7. IV pole - Material SS304 ERW tube,Bigger tube dia - 19 mm thickness - 2.5 mm, Telescopic tube dia - 14 mm, SS304 Hook rod dia - 8 mm., 8. Collection tray - Material - SS304,Size: 460L x 410W x 100 mm H

Finish Specification: 1. All SS parts - Glossy buff finish 2. Mattresses - PU foam in Rexin stitched cover,Color-Black. 3. Calf pad - PU Moulded with strap-Color Black Key Features: 1. Sliding leg section - Leg section can be adjusted with the help of mechanism for Gynec procedures 2. Collection tray - SS collection tray is easy to remove after the procedure 3. Safety rails - SS 304 foldable side rail / Head rail provided for patient safety on all three sides 4. IV pole mounting provision - Provision provided for IV pole Compliances: CE, ISO 13485 & ISO 9001

Infants Crib

Mattress For Crib

Paediatric Bed without Mattress

Mattress For Paediatric Bed

Over Bed Table

Partition Screen

Basin Stand

LAB TABLE

Wall Sided Lab Table

X Ray View Box

Twin Plate X-ray viewing screen designed to provide a high level of control luminance without flicker. Features: slim, Durable and effective energy efficient No UV emmision, flim active switch 4 step digital dimmer long life LED life 10000 Hour. Dimension: Frame(880 x 503 x 29 mm) Viewing area: (736 x 440 mm) Power Supply Input- AC 100-240V 50Hz. Brightness 10000 LUX, Weight 8.8 KG. It will be equipped with eight spring-loaded clips to secure the X-ray negative when in use. The X-ray viewing screen illumination shall be high frequency LED lamps, controlled by dimming balsat.

OT ITEMS

BMSIC/45025/76-2022/5019

Mobile OT Light

Manual Sliding Door with LEAD protections for X-ray of dimensions(WxH) 1000x2100mm having window, double glazing centrally in the door leaf 400 x 600mm

OT DOOR

MEDICAL GAS PIPELINE SYSTEM

Oxygen System

Bed Head Panel

Bed Head Panel Provision For Gas outlet O2=1, VAC=1 with 4 switch & socket, 1000 mm size complete with wiring ( rate including outlet)

HVAC WORK

The drain pipes shall not be connected to the rain water pipes - separate vertical pipe(s) shall be given to drain the condensate water to a suitable location . Drain pipes shall be paid for separately. ( Copper piping / cables shall not be suspended from the False Ceiling - but shall be suspended with proper supports. Wherever necesary, the False Ceiling shall be neatly cut to provide the said supports - and then made good as new. . Similarly, they shall be run neatly and cleanly on / above the partition walls in a straight line to the maximum extent possible. O-General / Toshiba/Carrier with R-410a refrigerant' or approved equivalent.

Cost Calculation: MRP. Rs.51,984/- + Rs.2500/-installation + 1500/- for 18" long M.S Stand = Rs.55,984/- +15% Contractor's Profit = Rs.64,382/-

Complete supply and installation of Non-Ductable split high wall A.C's of 2.0 TR (5 Star- BEE 2018) nominal capacity including installation of outdoor unit at specified locations, including all piping, insulation, wiring, etc, all complete, and 1 number of 2.0 TR capacity indoor unit, all complete including any and all M.S framework if required for installation, cutting / breaking windows, glass, etc, or making a hole through the panelling / brick work / concrete and making good the same, including all damage to the Interior / finishing works and making it good as new, including all drain pipes from the indoor units to suitable outer locations, or to an indoor toilet at any distance / length, including any cutting / making good of the same.

The drain pipes shall not be connected to the rain water pipes - separate vertical pipe(s) shall be given to drain the condensate water to a suitable location . Drain pipes shall be paid for separately. ( Copper piping / cables shall not be suspended from the False Ceiling - but shall be suspended with proper supports. Wherever necesary, the False Ceiling shall be neatly cut to provide the said supports - and then made good as new. . Similarly, they shall be run neatly and cleanly on / above the partition walls in a straight line to the maximum extent possible. Model:- O-General / Toshiba/Carrier with R-410a refrigerant' or approved equivalent.

Cost Calculation: Rs. 65,250/- + Rs.2000/-installation + 1500/- for 18" long M.S Stand = Rs.69,250/- +15% Contractor's Profit = Rs.79,637.5/-

Supply and installation of reputed, approved make of heavy duty voltage stabilizers suitable for 1.0 TR & 1.5 Tr. A.C, all complete with all safety features, including high-low cut off, TDR facility, voltage range from 130 - 280 volts, etc., with all plugs, sockets, switches, etc. Carrier V-Guard, 4 KVA, with 130 Volt input, or approved equivalent.

Total NSI Items

Stilt

ANALYSIS OF RATES

Details of cost for 1 sqm + 10% Wastage = 1.1 Sqm

As per Q.

LABOUR

TOTAL

Add 1 % Water charges on "W"

TOTAL

Add GST on "X" @ 18%

TOTAL

Add 15% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost of 1 Sqm

Details of cost for 1 Sqm

Materials:-

As per Q.

Labour

TOTAL

Add 1 % Water charges on "W"

TOTAL

Add GST on "X" @ 18%

TOTAL

Add 15% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost of 1 Sqm

Internal Glazing

Details of cost for 2.10 sqm

MATERIAL

Glass= 2.10 Sqm. Add Wastage @ 10% = 0.21 sqm. Total= 2.31 sqm.

as per Q.

LABOUR:

TOTAL

Add 1% for water charges

TOTAL

Add GST on 18%

TOTAL

Add 15% CPOH

TOTAL

Add Cess @ 1%

Cost for 2.1 sqm

Cost for 1 sqm

Details of cost for 2.10 sqm

MATERIAL

Glass= 2.10 Sqm. Add Wastage @ 10% = 0.21 sqm. Total= 2.31 sqm.

LABOUR

For fabrication of frame

TOTAL

Add 1 % Water charges on all except ''W-A''

Total

Add GST on "X" (multiplying factor 0.1405)

TOTAL

Add 15% CPOH on all except ''Y-A''

TOTAL

Add labour cess @ 1% ''Z-A''

TOTAL

Cost for 2.10 sqm

Cost for 1 sqm

Details of cost for each

as per Q.

TOTAL

Add 1 % Water charges on "W"

TOTAL

Add GST on "X" 18%

TOTAL

Add 15% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost of each

Details of cost for each

as per Q.

TOTAL

Add 1 % Water charges on "W"

TOTAL

Add GST on "X" 18%

TOTAL

Add 15% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost of each

Details of cost for each

as per Q.

TOTAL

Add 1 % Water charges on "W"

TOTAL

Add GST on "X" 18%

TOTAL

Add 15% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost of each

As per qt.

Installation charges

Transportation, loading, unloading

TOTAL

Add GST on "X"

TOTAL

Add 15% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost for 5 nos

Cost for 1 nos

As per qt.

Installation charges

Transportation, loading, unloading

TOTAL

Add GST on "X"

TOTAL

Add 15% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost for 15 nos

Cost for 1 nos

Automatic sliding door Set 1 operator of DORMA, Power Operative System etc.

Installation Charges

Freight Extra @5%

TOTAL (W)

Add GST 18% (B)

TOTAL: X (W+B)

Add for contractor’s profit and overheads @ 15% {C}

TOTAL

Add labour cess @1% (Z)

TOTAL: AA

Cost for 1 No's

Cost for 1 each

Details of cost for 1 metre

MATERIAL

as per qu.

TOTAL

Add 1 % Water charges on "W"

TOTAL

Add GST on "X" (multiplying factor 0.18)

TOTAL

Add 10% CPOH on "Y"

TOTAL

Add Cess @ 1% on "Z"

Cost of 1 metre

Details of cost for 1.0 Sqm

MATERIAL

as per Q.

as per Q.

Transportation, loading, unloading

TOTAL

Add GST 18%

TOTAL

Add 1 % Water charges

TOTAL

Add 15 % Contractor's profit and overheads

TOTAL

Add labour cess @ 1%

Cost of 1 sqm

Details of cost for 1Sqm

as per q.

Installation Charges @ 15%

Freight Extra @5%

TOTAL (W)

Add 1 % for water charges (A)

TOTAL: WC (W+A)

Add GST 18%

TOTAL: X (WC+B)

Add for contractor’s profit and overheads @ 15% {C}

TOTAL: Y (X+C)

TOTAL: Z (Y+D)

Cost for 1 Sqm

STILT