Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.2 LAccepted-AOC | ₹8.2 L Quoted ₹8.7 L | L1 | Accepted-AOC Accepted |
| 2 | L2₹9.2 L+₹53,795 (6.19%)Rejected-Finance | ₹9.2 L+₹53,795 (6.19%) | L2 | Rejected-Finance High Rate |
| 3 | L3₹9.8 L+₹1.1 L (12.7%)Rejected-Finance | ₹9.8 L+₹1.1 L (12.7%) | L3 | Rejected-Finance High Rate |
| 4 | L4₹9.9 L+₹1.2 L (13.8%)Rejected-Finance | ₹9.9 L+₹1.2 L (13.8%) | L4 | Rejected-Finance High Rate |
| 5 | L5₹10.0 L+₹1.3 L (15.3%)Rejected-Finance | ₹10.0 L+₹1.3 L (15.3%) | L5 | Rejected-Finance High Rate |
| Sl No | Description | Qty | Unit | M/S SINGH ENTERPRISE L2 | Elite Enterprises L7 | M/S MBS TRADING CO L9 | P .BANERJEE AND CO L5 | M/S AMARNATH AGARWALLA L4 | M/S Subhadip Enterprise L3 | M/S New Builders Corporation L8 | M/S ASHA ENTERPRISE L1 | M/S KUMAR AVINASH L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats or frame with shutters exc 1.50 Sqm and n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed.. | 18 | Each | 300 ₹5,400 | 355 ₹6,390 | 400 ₹7,200 | 305 ₹5,490 | 323 ₹5,814 | 300 ₹5,400 | 370 ₹6,660 | 100 ₹1,800 Lowest | 350 ₹6,300 |
| 2.00 | Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames),complete all as specified and as directed. | 10 | Each | 200 ₹2,000 | 254 ₹2,540 | 234 ₹2,340 | 220 ₹2,200 | 243 ₹2,430 | 200 ₹2,000 | 225 ₹2,250 | 100 ₹1,000 Lowest | 220 ₹2,200 |
| 3.00 | S&F of Pressed steel frames 125 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc.complete all as specified and as directed. | 50 | RM | 420 ₹21,000 | 465 ₹23,250 | 565 ₹28,250 | 475 ₹23,750 | 446 ₹22,300 | 450 ₹22,500 | 550 ₹27,500 | 350 ₹17,500 Lowest | 540 ₹27,000 |
| 4.00 | M& L for Plain Cement Concrete (1:3:6) Type C-1 using 20mm graded stone aggegate as in hold fast block, copping, filling in hollow door frame, bedblock, etc.complete all as specified and as directed. | 0.36 | Cum | 8,000 ₹2,880 | 8,170 ₹2,941.2 | 8,350 ₹3,006 | 8,120 ₹2,923.2 | 8,060 ₹2,901.6 | 8,000 ₹2,880 | 8,300 ₹2,988 | 7,000 ₹2,520 Lowest | 8,200 ₹2,952 |
| 5.00 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and as directed. | 15 | Sqm | 4,900 ₹73,500 | 5,210 ₹78,150 | 5,110 ₹76,650 | 5,180 ₹77,700 | 5,090 ₹76,350 | 5,100 ₹76,500 | 5,290 ₹79,350 | 4,800 ₹72,000 Lowest | 5,400 ₹81,000 |
| 6.00 | S&F Factory made solid panel wire guage PVC door shutter 30 mm thick in veener colour (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling wii be wire guage. The wire guage shall be wrappedon an additional square 8 mm MS solid tube.This tube shall be welded to MS tube. The wire guage shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing | 15 | Sqm | 3,000 ₹45,000 | 3,432 ₹51,480 | 3,180 ₹47,700 | 3,225 ₹48,375 | 3,220 ₹48,300 | 3,200 ₹48,000 | 3,320 ₹49,800 | 2,600 ₹39,000 Lowest | 3,390 ₹50,850 |
| 7.00 | Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets,complete all as specified and as directed. | 200 | Sqm | 40 ₹8,000 | 56 ₹11,200 | 55 ₹11,000 | 42 ₹8,400 | 43 ₹8,600 | 40 ₹8,000 | 50 ₹10,000 | 20 ₹4,000 Lowest | 47 ₹9,400 |
| 8.00 | S& F Non asbestos fibre cement buildingboards fixed orlaid/ inserted to timber/GI/Aluminium framework with screws for fixing 600mm x 600mm grid (frame work for celling shall be measured and paid separately) 06mm thick in celling fixed with screw as per manufactures's instruction and acoustic purpose 60x60 cm in size.fixed with snap grid by screw etc completed all as specified and as directed.NOTE: (The rate inclusive of scaffolding and necessary arrangements(ht of building shall be up to 10m complete all as specified and as directed. | 200 | Sqm | 580 ₹1,16,000 | 610 ₹1,22,000 | 622 ₹1,24,400 | 595 ₹1,19,000 | 598 ₹1,19,600 | 590 ₹1,18,000 | 620 ₹1,24,000 | 400 ₹80,000 Lowest | 610 ₹1,22,000 |
| 9.00 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. . NOTE: (The rate inclusive of scaffolding and necessary arrangements),complete all as specified and as directed. | 200 | Sqm | 140 ₹28,000 | 165 ₹33,000 | 175 ₹35,000 | 165 ₹33,000 | 154 ₹30,800 | 155 ₹31,000 | 165 ₹33,000 | 110 ₹22,000 Lowest | 160 ₹32,000 |
| 10.00 | S&F of prepainted anodised Aluminium snap grid frame work for flase celling complete all as specified and as directed. | 200 | Sqm | 580 ₹1,16,000 | 625 ₹1,25,000 | 775 ₹1,55,000 | 635 ₹1,27,000 | 612 ₹1,22,400 | 620 ₹1,24,000 | 765 ₹1,53,000 | 400 ₹80,000 Lowest | 700 ₹1,40,000 |
Tender Value
₹9 L
EMD Value
₹18,000
Closing Date
26 Jan 2026, 6:00 pmClosed
SHRI TAPAN DAS, AE (CIVIL)
AGE I AF SINGARSI
REPAIR/REPLACEMENT OF PVC DOOR, STEEL WINDOW AND PVC SHELF AND SHUTTER IN CIVILIAN QTRS AND BEHRA LINE AT AF STN SINGARSI
2026_MES_746995_2
C/8802/E8
Open Tender
Civil Works
Item Rate
180 days
AGE I AF SINGARSI
As Per tender documents
8 documents required · 8 mandatory
₹500
AGE I AF SINGARSI
₹18,000
Yes
24 Mar 2026
3 Jan 2026
28 Jan 2026
3 Jan 2026
26 Jan 2026
18 Jan 2026
Taking down chowkats or frame with shutters exc 1.50 Sqm and n.exc 4 Sqm each (without taking off shutters from the frames) complete all as specified and as directed..
Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames),complete all as specified and as directed.
S&F of Pressed steel frames 125 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc.complete all as specified and as directed.
M& L for Plain Cement Concrete (1:3:6) Type C-1 using 20mm graded stone aggegate as in hold fast block, copping, filling in hollow door frame, bedblock, etc.complete all as specified and as directed.
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and as directed.
S&F Factory made solid panel wire guage PVC door shutter 30 mm thick in veener colour (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling wii be wire guage. The wire guage shall be wrappedon an additional square 8 mm MS solid tube.This tube shall be welded to MS tube. The wire guage shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing
Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets,complete all as specified and as directed.
S& F Non asbestos fibre cement buildingboards fixed orlaid/ inserted to timber/GI/Aluminium framework with screws for fixing 600mm x 600mm grid (frame work for celling shall be measured and paid separately) 06mm thick in celling fixed with screw as per manufactures's instruction and acoustic purpose 60x60 cm in size.fixed with snap grid by screw etc completed all as specified and as directed.NOTE: (The rate inclusive of scaffolding and necessary arrangements(ht of building shall be up to 10m complete all as specified and as directed.
S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. . NOTE: (The rate inclusive of scaffolding and necessary arrangements),complete all as specified and as directed.
S&F of prepainted anodised Aluminium snap grid frame work for flase celling complete all as specified and as directed.
M&L for preparing of surfaces plastered or unplastered ceiling surfaces and applying two coats of white wash over a coat of chalk whiting primer complete all as specified and as directed.
Dismantling old particle boards/plywood as in shelves boarding, any description, fixed in any position with nails complete all as specified and as directed.
S & F solid PVC door frame of size 50 x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube, in opening complete all as specified and as directed.
S&F factory made solid PVC moulded door designer shutter 30 mm thick comprising of With 30mm thick Wood free EPS in centre core, with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face complete all as specified and as directed.
S/F, Solid PVC Wall Lining wooden finish consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and preparing existing surface and fixing at site on as cupboard etc as complete all as specified and as directed.
S/F 18mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing fixed as in shelving of cupboard etccomplete all as specified and as directed.
S&F MS butt hinges 100mm size, medium weight cold rolled mild steel complete all as specified and as directed.
S&F 100 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 100mm size of aluminum handles, cast type anodised complete all as specified and as directed.
S&F 150 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150 mm size of aluminum handles, cast type anodised complete all as specified and as directed.
S&F 200mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed.
S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F 100mm Hasp and staple, safety type,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.
S&F steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded,complete all as specified and as directed.
S&F steel window with side hung shutter including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded,complete all as specified and as directed.
M&L for steel ventilator with top hung shutter including hinges steel peg stay,complete all as specified and as directed.
Supply and fabrication of Mild steel guard bars and welded to window frames,conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
S&F for 3 mm thick plain glass ordinary quality & glazing with oil and putty in square n. exc 0.5 sqm in each pane, complete all as specified and as directed.
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.
S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.
M&L as in repair steel window of area exc 1 n exc 2 sqm making in servicible condition (opening and closing of shutter) including necessary welding work,oiling,gas cutter, greasing and including necessary box type hinges and handle if required etc complete all as specified and as directed.
M&L as in repair steel window of area n exc 1 sqm making in servicible condition (opening and closing of shutter) including necessary welding work,oiling ,gas cutter, greasing and including necessary box type hinges and handle if required etc complete all specified and directed.
S&F in repair Harrison curtain rod of dia 20mm rails aluminium alloy plated with fixing brackets,stops, rollers etc complete all as specified and as directed.
M & L Preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc.complete all as specified and as directed.
M&L for preparation of new steel surfaces n exc 10cm width or girthwhen unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat red oxide primer,complete all as specified and as directed.
M & L Preparation old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed.
Taking down shutter of any description exc 1sqn but n. exc 2sqm each and refixing in same position including resecuring or easing and adjusting complete all as specified.
Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc., ncl removing rubbing to a distance exceeding 100m complete all as specified and as directed.
Material & Labour for (10+5)mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed.
Material & Labour for two coats of oil bound distamper over a coat of primer on new plastered surfaces including preparation of surface complete all as specified and as directed.
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.29 MB
BOQ_836491.xls
BOQ • 0.30 MB
TT8802.pdf
Tender Documents • 1.59 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .