CHAIN CONV SYSTEM VARANASI

SUP:5HP HELICAL DRIVE UNIT 12117- — PART NAME:HELICAL GEAR BOX TYPE DRIVE UNIT; PART NUMBER:N/A; MANUFACTURER:N/A; PART RATING:5 HP; EQUIPMENT NAME:CONVEYOR; EQUIPMENT MODEL:N/A; DRIVE UNIT COMPLETE WITH BASE FRAME, GEAR BOX, MOTOR, COUPLING AND OTHER ACCESSORIES.

SUP:5HP HELICAL DRIVE UNIT 12117- — PART NAME:HELICAL GEAR BOX TYPE DRIVE UNIT; PART NUMBER:N/A; MANUFACTURER:N/A; PART RATING:5 HP; EQUIPMENT NAME:CONVEYOR; EQUIPMENT MODEL:N/A; DRIVE UNIT COMPLETE WITH BASE FRAME, GEAR BOX, MOTOR, COUPLING AND OTHER ACCESSORIES.

SUP:5HP HELICAL DRIVE UNIT 12117- — PART NAME:HELICAL GEAR BOX TYPE DRIVE UNIT; PART NUMBER:N/A; MANUFACTURER:N/A; PART RATING:5 HP; EQUIPMENT NAME:CONVEYOR; EQUIPMENT MODEL:N/A; DRIVE UNIT COMPLETE WITH BASE FRAME, GEAR BOX, MOTOR, COUPLING AND OTHER ACCESSORIES.

SUP:7.5HP HELICAL DRIVE — PART NAME:HELICAL GEAR BOX TYPE DRIVE UNIT; PART NUMBER:N/A; MANUFACTURER:N/A; PART RATING:5 HP; EQUIPMENT NAME:CONVEYOR; EQUIPMENT MODEL:N/A; DRIVE UNIT COMPLETE WITH BASE FRAME, GEAR BOX, MOTOR, COUPLING AND OTHER ACCESSORIES.

SUP:7.5HP HELICAL DRIVE — PART NAME:HELICAL GEAR BOX TYPE DRIVE UNIT; PART NUMBER:N/A; MANUFACTURER:N/A; PART RATING:5 HP; EQUIPMENT NAME:CONVEYOR; EQUIPMENT MODEL:N/A; DRIVE UNIT COMPLETE WITH BASE FRAME, GEAR BOX, MOTOR, COUPLING AND OTHER ACCESSORIES.

SUP:7.5HP HELICAL DRIVE — PART NAME:HELICAL GEAR BOX TYPE DRIVE UNIT; PART NUMBER:N/A; MANUFACTURER:N/A; PART RATING:5 HP; EQUIPMENT NAME:CONVEYOR; EQUIPMENT MODEL:N/A; DRIVE UNIT COMPLETE WITH BASE FRAME, GEAR BOX, MOTOR, COUPLING AND OTHER ACCESSORIES. 19 SUP: AUTO SOAP SOLUTION 12117- Lump Sum 1 995468 Yes DESIGN, MANUFACTURE AND SUPPLYING OF AUTO SOAP SOLUTION SUPPLY SYSTEM WITH GALVANIZED IRON PIPELINES TO EVERY SOAP SOLUTION TRAY, FLAMEPROOF MOTOR, PUMP, PNEUMATIC AGITATOR, SUITABLE SOAP SOLUTION STORAGE TANK, NECESSARY PNEUMATIC ACCESSORIES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 20 SUP:CHAIN CONV SYS 12117- Running Meter 225 998876 Yes 47.5/35KG DESIGN, MANUFACTURE AND SUPPLYING GALVANIZED IRON (HOT DIPPED GALVANIZED) CHAIN CONVEYOR SYSTEM FOR HANDLING 5 KG, 35 KG AND 47.5 KG TYPE OF CYLINDERS (DESIGN WEIGHT OF CYLINDER IS APPROXIMATE 70 KG) AT 400 CYL/HR NET CAPACITY INCLUDING SUPPLY OF CONVEYOR TRACK, LEG SUPPORTS, RAILING WITH SUPPORTS, CHAIN, PE STRIPS FOR THE BOTTOM OF CHAIN AND INSIDE SURFACES OF RAILING ANGLES, SPROCKETS, SHAFTS, BEARINGS, TAKE UPS, GASKETS, GALVANIZED IRON NUT BOLTS FOR JOINING THE CONVEYOR SECTIONS AND OTHER ACCESSORIES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS DETAILED IN THE MATERIAL REQUISITION AND AS ADVISED BY HPCL. RATE TO INCLUDE CARRYING OUT THIRD PARTY INSPECTION AS PER THE SCOPE OF INSPECTION DETAILED IN THE TENDER DOCUMENT. TRANSPORTATION OF ABOVE MATERIAL TO BHOPAL SITE AND UNLOADING/STACKING THE MATERIAL AT SITE SHALL BE IN THE SCOPE OF VENDOR. THE FOLLOWING MATERIAL/ACCESSORIES TO BE SUPPLIED UNDER THIS ITEM SHALL BE GALVANIZED IRON QUALITY AND THE REST OF ACCESSORIES LIKE SPROCKETS, SHAFTS, BEARINGS, PE STRIPS, CONVEYOR CHAIN, COUNTER WEIGHTS, SOAP TRAYS ETC. SHALL BE AS PER THE RESPECTIVE MATERIAL QUALITY SPECIFIED IN THE MATERIAL REQUISITION. GALVANIZED IRON QUALITY MATERIAL:CONVEYOR STRAIGHT SECTIONS, BENDS, T-SECTIONS, DRIVE SECTIONS, LEG SUPPORTS, RAILING WITH SUPPORTS ETC. AS PER THE DESIGN OF CONVEYOR SYSTEM. GALVANIZATION SHALL BE “HOT DIP” TYPE MEETING THE RELEVANT BIS SPECIFICATIONS. MINIMUM GALVANIZATION THICKNESS SHALL BE 50 MICRONS. NOTE: THE TOP OF CHAIN CONVEYOR INSIDE THE FILLING SHED SHALL BE KEPT NORMALLY AT 550 MM ABOVE THE FLOOR LEVEL AND IN ALL OTHER SHEDS, THE CHAIN CONVEYOR SHALL BE LAID ON THE FLOOR WITH 50 MM TO 100 MM CLEARANCE FROM THE FLOOR. HOWEVER THE HEIGHT OF LEG SUPPORTS IN CONNECTING PLATFORMS AND SHEDS (IF REQUIRED) SHALL VARY AS PER THE SITE REQUIREMENT. THE VENDORS TO CONSIDER THE ABOVE REQUIREMENT WHILE QUOTING THE RATES FOR THIS ITEM. 21 SUP:ROLLER CONV FOR 12117- Running Meter 20 998876 Yes 47.5/35KG ROLLER CONVEYORS FOR 35/47.5 KG CYLINDERS: DESIGN MANUFACTURE, SUPPLYING OF UNPOWERED ROLLER CONVEYOR OF SUITABLE DIMENSIONS AND DUTY FOR 47.5 KG CYLINDERS AS PER DETAILED TECHNICAL SPECIFICATIONS. 22 SUP: WASHING UNIT FOR 12117- Each 1 995468 Yes 47.5KG DESIGN, MANUFACTURE AND SUPPLYING OF CYLINDER WASHING UNIT OF CAPACITY 400 CYL/HOUR FOR 47.5 KG CYLINDERS CONSISTING OF FLAMEPROOF MOTOR AND PUMP, FLEXIBLE COUPLING, BASE FRAME, CONVEYOR SECTION FOR TRANSPORTING THE CYLINDERS THROUGH WASHING UNIT, STAINLESS STEEL WATER SUMP, SPRINKLER NOZZLES, FLAMEPROOF PUSH BUTTON STATION WITH STAND ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 23 SUP: TILTING TEST BATH 12117- Each 1 995468 Yes 47.5KG DESIGN, MANUFACTURE AND SUPPLYING OF IN-LINE DIP/TILTING TYPE TEST BATH OF CAPACITY 60 CYL/HR SUITABLE FOR INSPECTION OF 35/47.5 KG TYPE OF FILLED LPG CYLINDER INCLUDING PROVIDING DIP TANK WITH DRAIN VALVE, CAGE, PNEUMATIC DIPPING AND LIFTING ARRANGEMENT, NECESSARY SIDE RAILING, STOPPER AND OTHER SAFETY INTERLOCKS ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 24 SUP.47.5 KG PRE-FILLING 12117- Each 2 995468 Yes MACHIN DESIGN, MANUFACTURE AND SUPPLYING OF PREFILLING MACHINE SUITABLE FOR FILLING OF 47.5 KG TYPE OF FILLED LPG CYLINDERS WITH LOT VALVES INCLUDING PROVIDING ALL PNEUMATIC AND LIFTING ARRANGEMENT, NECESSARY SIDE RAILING, STOPPERS AND OTHER SAFETY INTERLOCKS ELECTRONICS ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 25 SUP. 47.5KG FILLING MACHINE 12117- Each 2 995468 Yes DESIGN, MANUFACTURE AND SUPPLYING OF FILLING MACHINE SUITABLE FOR FILLING OF 35/47.5 KG TYPE OF LPG CYLINDERS WITH LOT VALVES INCLUDING SUPPLY OF PNEUMATICS AND LIFTING ARRANGEMENT, NECESSARY SIDE RAILING, STOPPERS AND OTHER SAFETY INTERLOCKS FLP ELECTRONICS ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 26 SUP.ONLINE FLP CHK SCALE 12117- Each 1 998877 Yes 47.5K DESIGN, MANUFACTURE AND SUPPLYING OF ONLINE CHECK SCALE SUITABLE FOR CHECKING WEIGHT OF 35/47.5 KG FILLED LPG CYLINDERS. 27 SUP. SINGLE CVT WITH 12117- Each 2 995468 Yes STAND FOR DESIGN, MANUFACTURE AND SUPPLYING OF SINGLE COMPACT VALVE TESTER OF CAPACITY 300 CYL/HR. FOR SQC PURPOSE WITH ALL NECESSARY PNEUMATIC ACCESSORIES, SET OF STOPPERS, PNEUMATIC CONTROL PANEL ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 28 SUP. SINGLE CVT WITH 12117- Each 2 995468 Yes STAND FOR DESIGN, MANUFACTURE AND SUPPLYING OF SINGLE COMPACT VALVE TESTER OF CAPACITY 300 CYL/HR. FOR SQC PURPOSE WITH ALL NECESSARY PNEUMATIC ACCESSORIES, SET OF STOPPERS, PNEUMATIC CONTROL PANEL ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 29 SUP-ADJ SCALE FOR 47.5KG 12117- Each 1 998717 Yes ADJUSTMENT SCALE COMPLETE WITH FACILITY OF ADDING OF LPG WHEN THE CYLINDER IS UNDERWEIGHT AND REMOVING OF EXCESS LPG FROM THE CYLINDER TO THE DESIGNATED WEIGHT AFTER FILLING OF THE CYLINDER. THE ADJUSTMENT SCALE WILL AUTOMATICALLY DETECT THE CORRECTION OF WEIGHT AND WILL ADJUST THE WEIGHT OF THE CYLINDER ACCORDINGLY. 30 SUP.PUSHER UNIT 47.5KG 12117- Each 2 998877 Yes DESIGN, MANUFACTURE AND SUPPLY OF PUSHER ASSEMBLY FOR 47.5 KG CONSISTING OF 1 NUMBER PUSHER, 1 SET OF STEPPERS, NECESSARY SENSORS, PNEUMATIC VALVES, TUBING ETC. COMPLETE FOR AUTO OPERATION OF THE PUSHER UNIT AS PER THE REQUIREMENT AND TECHNICAL SPECIFICATIONS OF THE TENDER DOCUMENT AND AS ADVISED BY HPCL. 31 SUP.STOPPER UNIT 47.5KG 12117- Set 6 995468 Yes DESIGN, MANUFACTURE AND SUPPLY OF DOUBLE STOPPER ASSEMBLY CONSISTING OF 2 NOS. OF ARMS FOR STOPPER, NECESSARY PNEUMATIC VALVES, TUBING ETC. COMPLETE AS PER THE REQUIREMENT AND TECHNICAL SPECIFICATIONS OF THE BID DOCUMENT AND AS ADVISED BY HPCL. 32 SUP.TROLLEY-47.5KG 12117- Each 2 998877 Yes DESIGN, MANUFACTURE AND SUPPLY OF 47.5 KG CYLINDER TROLLEY INCLUDING PROVIDING ALL PNEUMATIC, LIFTING ARRANGEMENT ETC COMPLETE AS PET THE ATTACHED SPECIFICATIONS AND INSTRUCTIONS OF ENGINEER-IN-CHARGE. 33 SUP:CHAIN CONV SYS 5KG 12117- Running Meter 225 Yes GALVANIZED IRON CHAIN CONVEYOR 5 KG CYLINDERS: DESIGN, MANUFACTURE AND SUPPLYING GALVANIZED IRON (HOT DIPPED GALVANIZED) CHAIN CONVEYOR SYSTEM FOR HANDLING ALL KINDS OF 5 KG TYPE OF CYLINDERS (DESIGN WEIGHT OF CYLINDER IS APPROXIMATE 20 KG.) AT THE RATE OF 1500 CYLINDER/HOUR NET CAPACITY INCLUDING SUPPLY OF CONVEYOR TRACK, LEG SUPPORTS, RAILING WITH SUPPORTS, CHAIN, PE STRIPS FOR THE BOTTOM OF CHAIN AND INSIDE SURFACES OF RAILING ANGLES, SPROCKETS, SHAFTS, BEARINGS, TAKE UPS, GASKETS, GALVANIZED IRON NUT BOLTS FOR JOINING THE CONVEYOR SECTIONS AND OTHER ACCESSORIES ETC. ALL SYSTEM SHOULD BE DESIGNED BY VENDOR AS PER CYLINDER DIMENSIONS AND SHOULD BE SUITABLE FOR ALL TYPE OF 5 KG CYLINDERS. RATE TO INCLUDE CARRYING OUT THIRD PARTY INSPECTION AS PER THE SCOPE OF INSPECTION DETAILED IN THE TENDER DOCUMENT. TRANSPORTATION OF ABOVE MATERIAL TO PATALGANGA LPG PLANT AND UNLOADING/STACKING THE MATERIAL AT SITE SHALL BE IN THE SCOPE OF VENDOR. THE FOLLOWING MATERIAL/ACCESSORIES TO BE SUPPLIED UNDER THIS ITEM SHALL BE GALVANIZED IRON QUALITY AND THE REST OF ACCESSORIES LIKE SPROCKETS, SHAFTS, BEARINGS, PE STRIPS, CONVEYOR CHAIN, COUNTER WEIGHTS, SOAP TRAYS ETC. SHALL BE AS PER THE RESPECTIVE MATERIAL QUALITY SPECIFIED IN THE TENDER DOCUMENT. GALVANIZED IRON QUALITY, MATERIAL: CONVEYOR STRAIGHT SECTIONS, BENDS, T-SECTIONS, DRIVE SECTIONS, Y/T SECTIONS, LEG SUPPORTS, RAILING WITH SUPPORTS ETC. AS PER THE DESIGN OF CONVEYOR SYSTEM ARE INCLUDED IN SCOPE AND SHALL NOT BE PAID SEPARATELY. GALVANIZATION SHALL BE “HOT DIP” TYPE MEETING THE RELEVANT BIS SPECIFICATIONS. MINIMUM GALVANIZATION THICKNESS SHALL BE 50 MICRONS. NOTE: THE TOP OF CHAIN CONVEYOR INSIDE THE FILLING SHED SHALL BE KEPT NORMALLY AT 550 MM ABOVE THE FLOOR LEVEL AND IN ALL OTHER SHEDS, THE CHAIN CONVEYOR SHALL BE LAID ON THE FLOOR WITH 50 MM TO 100 MM CLEARANCE FROM THE FLOOR. HOWEVER THE HEIGHT OF LEG SUPPORTS IN CONNECTING PLATFORMS AND SHEDS (IF REQUIRED) SHALL VARY AS PER THE SITE REQUIREMENT. PART OF THE CONVEYOR SYSTEM SHALL BE BI-DIRECTIONAL. NO SEPARATE RATE IS PAYABLE FOR BI-DIRECTIONAL CONVEYORS. LEG HEIGHT WILL VARY AS PER SITE REQUIREMENT AND NO ADDITIONAL PAYMENT WILL BE MADE FOR THE SAME. THE VENDORS TO CONSIDER THE ABOVE REQUIREMENT WHILE QUOTING THE RATES FOR THIS ITEM, NOTE: 1. BIDDER SHOULD GIVE DESIGN OF CHAIN CONVEYOR SYSTEM AND LAYOUT WITH BOM WITHIN 15 DAYS FROM THE PLACEMENT OF PO/LOI, 2. BIDDERS ARE REQUIRED TO PROVIDE 3 MM GALVANIZED IRON WATER TRAY COVER ARRANGEMENT WITH CLAMP FOR CONVEYOR TO ARREST WATER SPREADING ON FLOOR. 3. FOR CROSSING OF CONVEYOR BIDDER ARE REQUIRED TO CONSIDER ALL NECESSARY MATERIAL IN THIS ITEM ONLY AND THERE WILL BE NO EXTRA PAYMENT WILL BE MADE BY HPCL. SPARE TO BE SUPPLIED ALONG WITH MATERIAL: 1. 10 METER CHAIN TO BE SUPPLIED WITH PER 500-METER CHAIN CONVEYOR SYSTEM OF ORDERED QUANTITY CHAIN CONVEYOR SYSTEM, 2. 10% OF RIVETS OF CHAIN USED FOR CHAIN CONVEYOR SYSTEM, 3. 10% OF THE COUNTER WEIGHT ASSEMBLY, 4. MINIMUM 02 NUMBERS OF EACH TYPE SOAP TRAY USED IN THE SYSTEM, 5. PILLOW BLOCK, COUPLINGS-5% OF INSTALLED QUANTITY, SIZE WISE (MINIMUM 5 OF EACH SIZE), 6. WEAR STRIPS-10% OF EACH INSTALLED QUANTITY, CHAIN CONVEYOR ASSEMBLY SHOULD BE DESIGNED BY VENDOR AND SHOULD BE SUITABLE OF HANDLING ALL TYPE OF 5 KG CYLINDERS SMOOTHLY WITHOUT ANY INTERRUPTION IN REGULAR MOVEMENT OF 5 KG CYLINDER. DESIGN/DRAWINGS SHOULD BE SUBMITTED BY VENDOR WITHIN 15 DAYS AFTER RECEIPT OF PO/LOI WHICHEVER IS THE EARLIER. 34 SUP:TELESCOPIC 12117- Each 2 998876 Yes CONVEYOR-7.5m DESIGN, MANUFACTURE AND SUPPLYING OF TELESCOPIC CONVEYORS-7.5 METER LENGTH WITH CHAIN DRIVE AND BOOM DRIVE, LEG SUPPORTS, RAILING, PE STRIPS, SPROCKETS, BEARINGS, SHAFTS, SOAP TRAYS, FOUNDATION BOLTS, LIMIT SWITCHES ETC. COMPLETE AS PER THE DETAILED TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. NOTE: MOTOR USED FOR TELESCOPIC CONVEYOR SHOULD BE CRANE AND HOIST DUTY MOTORS. 35 SUP: CAP HAMMERING UNIT 12117- Each 1 Yes 5KG PLC CAP HAMMERING MACHINE FOR 5 KG CYLINDER: DESIGN, MANUFACTURE AND SUPPLYING OF AUTO-CAP HAMMERING UNIT OF CAPACITY 1500 CYLINDER/HOUR WITH ALL NECESSARY PNEUMATIC ACCESSORIES, CONTROL PANEL ETC. COMPLETE PLC CAP HAMMERING SYSTEM SHOULD BE DESIGNED BY VENDOR AND SHOULD BE SUITABLE OF HANDLING ALL TYPE OF 5 KG CYLINDERS SMOOTHLY WITHOUT ANY INTERRUPTION IN REGULAR MOVEMENT OF 5 KG CYLINDER. DESIGN/DRAWINGS SHOULD BE SUBMITTED BY VENDOR WITHIN 15 DAYS AFTER RECEIPT OF PO/LOI WHICHEVER IS THE EARLIER. 36 SUP:5KG SQC ASSEMBLY 12117- Each 1 Yes PART NAME:AUTO SQC ASSEMBLY; INCLUDING SCALE, CVT AND PNEUMATIC COMPLETE SET TO BE SUPPLIED, SQC ASSEMBLY COMPLETE SET TO BE SUPPLIED IN ALL ASPECT. SYSTEM SHOULD BE DESIGNED BY VENDOR AND SHOULD BE SUITABLE OF HANDLING ALL TYPE OF 5 KG CYLINDERS SMOOTHLY WITHOUT ANY INTERRUPTION IN REGULAR MOVEMENT OF 5 KG CYLINDER. DESIGN/DRAWINGS SHOULD BE SUBMITTED BY VENDOR WITHIN 15 DAYS AFTER RECEIPT OF PO/LOI WHICHEVER IS THE EARLIER 37 SUP: PURGING MACHINE 12117- Each 1 Yes 5/47.5/42 IT REQUIRES TO PURGE OUT THE AIR FROM THE CYLINDER AND PURGE IN LPG VAPOUR IN IT. 38 SUP.MANUAL EVACUATION 12117- Each 1 998877 Yes UNIT(2HE DESIGN, MANUFACTURE AND SUPPLYING OF MANUAL EVACUATION RACK FOR 2 CYLINDERS OF 47.5 KG LPG CYLINDERS INCLUDING PROVIDING, PNEUMATIC AND LIFTING ARRANGEMENT, NECESSARY, STOPPERS AND OTHER SAFETY INTERLOCKS, ELECTRONICS ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 39 SUP.MANUAL EVACUATION 12117- Each 1 998877 Yes UNIT(2HE DESIGN, MANUFACTURE AND SUPPLYING OF MANUAL EVACUATION RACK FOR 2 CYLINDERS OF 47.5 KG LPG CYLINDERS INCLUDING PROVIDING, PNEUMATIC AND LIFTING ARRANGEMENT, NECESSARY, STOPPERS AND OTHER SAFETY INTERLOCKS, ELECTRONICS ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 40 SUP: DE-PRESSURISING UNIT 12117- Each 2 Yes 4HEA AS PER DETAILED SCOPE OF JOB ATTACHED. 41 SUP: VALVE UN-SCREWING 12117- Each 1 Yes UNIT ON VALVE ON-OFF SCREWER FOR 14.2/19 KG CYLINDERS 42 SUP: VALVE UN-SCREWING 12117- Each 1 Yes UNIT OF VALVE ON-OFF SCREWER FOR 14.2/19 KG CYLINDERS 43 SUP: DE-GASSING UNIT, 5 12117- Each 1 998877 Yes HEAD, DESIGN, MANUFACTURE AND SUPPLY OF DE-GASSING UNIT FOR DE-GASSING OF EMPTY CYLINDERS AFTER DECANTING AND COLD FLARING OF CYLINDERS BY FILLING THE CYLINDERS WITH WATER UP TO THE LEVEL OF OVER-FLOWING. THE UNIT TO CONSIST OF 6 HEAD WATER FILLING HEADS AND IS TO BE SUPPLIED WITH FLAMEPROOF MOTOR FOR FILLING OF EMPTY CYLINDERS WITH WATER. THE FACILITY HAS TO CONSIST OF PROVISION OF RE-CIRCULATION OF WATER DECANTED FROM DE-GASSED CYLINDERS. CONSTRUCTION OF LEAK PROOF WATER TANK OF MINIMUM 3 KL CAPACITY INCLUDED IN THE SCOPE OF VENDOR. 44 SUP: DE-GASSING UNIT, 2 12117- Each 1 998877 Yes HEAD, DESIGN, MANUFACTURE AND SUPPLY OF DE-GASSING UNIT FOR DE-GASSING OF EMPTY CYLINDERS AFTER DECANTING AND COLD FLARING OF CYLINDERS BY FILLING THE CYLINDERS WITH WATER UP TO THE LEVEL OF OVER-FLOWING. THE UNIT TO CONSIST OF 6 HEAD WATER FILLING HEADS AND IS TO BE SUPPLIED WITH FLAMEPROOF MOTOR FOR FILLING OF EMPTY CYLINDERS WITH WATER. THE FACILITY HAS TO CONSIST OF PROVISION OF RE-CIRCULATION OF WATER DECANTED FROM DE-GASSED CYLINDERS. CONSTRUCTION OF LEAK PROOF WATER TANK OF MINIMUM 3 KL CAPACITY INCLUDED IN THE SCOPE OF VENDOR. 45 SUP: DE-GASSING UNIT, 2 12117- Each 1 998877 Yes HEAD, DESIGN, MANUFACTURE AND SUPPLY OF DE-GASSING UNIT FOR DE-GASSING OF EMPTY CYLINDERS AFTER DECANTING AND COLD FLARING OF CYLINDERS BY FILLING THE CYLINDERS WITH WATER UP TO THE LEVEL OF OVER-FLOWING. THE UNIT TO CONSIST OF 6 HEAD WATER FILLING HEADS AND IS TO BE SUPPLIED WITH FLAMEPROOF MOTOR FOR FILLING OF EMPTY CYLINDERS WITH WATER. THE FACILITY HAS TO CONSIST OF PROVISION OF RE-CIRCULATION OF WATER DECANTED FROM DE-GASSED CYLINDERS. CONSTRUCTION OF LEAK PROOF WATER TANK OF MINIMUM 3 KL CAPACITY INCLUDED IN THE SCOPE OF VENDOR. 46 SUP: HYDRO PRESSURE 12117- Each 1 995468 Yes TESTING UN DESIGN, MANUFACTURE, SUPPLY AND COMMISSIONING OF TILTING TYPE 10 HEAD HYDROSTATIC PRESSURE TESTING UNIT SUITABLE FOR HANDLING 10 CYLINDERS CONSISTING OF FLAMEPROOF MOTOR, LOW PRESSURE AND HIGH PRESSURE PUMPS, WATER AND AIR VESSELS OF SUITABLE CAPACITY, NECESSARY FILLING GUNS, HOSES, CONTROL VALVES, PNEUMATIC ACCESSORIES, CONTROL PANEL, PRESSURE GAUGES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. PRESSURE TESTING OF CYLINDERS SHALL BE CARRIED OUT AT 2.5 MPA APPROXIMATELY. 47 SUP: CYLINDER INTERNAL 12117- Each 1 Yes VACUUM AS PER DETAILED SCOPE OF JOB ATTACHED. 48 SUP: PAINTING 12117- Each 1 995473 Yes BOOTH(PRIMARY) DESIGN, MANUFACTURE AND SUPPLYING OF AUTO PAINT BOOTH WITH FLAMEPROOF BLOWER, WATER CURTAIN PUMP WITH FLAMEPROOF MOTOR, NECESSARY PNEUMATIC ACCESSORIES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. (FOR FINAL PAINT). 49 SUP: OVERHEAD CONVEYOR 12117- Meters 250 Yes CONVEYOR; TYPE:OVERHEAD 50 SUP: PAINTING 12117- Each 1 995473 Yes BOOTH(FINISHED) DESIGN, MANUFACTURE AND SUPPLYING OF AUTO PAINT BOOTH WITH FLAMEPROOF BLOWER, WATER CURTAIN PUMP WITH FLAMEPROOF MOTOR, NECESSARY PNEUMATIC ACCESSORIES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. (FOR FINAL PAINT). 51 SUP: VALVE SCREWING UNIT 12117- Each 1 Yes (HYDR VALVE ON-OFF SCREWER FOR 14.2/19 KG CYLINDERS 52 SUP: HIGH PRESSURE AIR 12117- Each 1 Yes COMPRES ERECTION AND COMMISSIONING HIGH PRESSURE AIR COMPRESSOR 12 KG/CM2: INSTALLATION OF AIR COMPRESSOR AS PER DETAILED DESCRIPTION PROVIDED IN SCHEDULE OF QUANTITY. 53 SUP: PN. PRESSURE TESTING 12117- Set 1 Yes UNIT ITEM NAME:6 CYLINDER PNEUMATIC TEST UNIT; FOR LPG CYLINDER INCLUDING A WATER BATH, LOWERING PLATFORM, AIR FILLING GUN, FIXING AND CENTERING ARRANGEMENT, PRESSURE SWITCH, PRESSURE GAUGES, VALVES, PNEUMATIC CYLINDER WITH ACCESSORIES, FITTINGS ETC.(REQUIRED AIR PRESSURE 12 KG/SQ.CM) 54 SUP: VP RING, FOOT RING 12117- Each 1 996729 Yes COLD R MACHINE CAPABLE TO REPAIR BOTH 14.2 KG AND 19 KG CYLINDERS WITH HYDRAULIC CYLINDERS FOR A) STAY PLATE WORKING STATION: 01 NO.B) FOOT RING RESHAPING WORKING STATION: 01 NO.C) V.P. RING RESHAPING WORKING STATION: 01 NO.D) V.P. RING CROSS SECTION REPAIRING STATION: 01 NO. 55 SUP: CYLINDER CRUSHING 12117- Each 1 998877 Yes UNIT DESIGN, MANUFACTURE AND SUPPLY OF CYLINDER CRUSHING UNIT TO BE USED FOR CRUSHING OF SCRAP CYLINDERS OF 33.3 LITRES AND 44.5 LITRES WATER CAPACITY.

SUP: PORTABLE WEIGHING — WEIGHING SCALE; TYPE:PORTABLE; CAPACITY:100 KG; ADDITIONAL INFORMATION:NON-FLAME PROOF; WITH TROLLEY MOUNTED 57 SUP: CYLINDER PUNCHING 12117- Each 1 Yes MACHINE ITEM NAME:CYLINDER PUNCHING MACHINE; TYPE:N/A; AS PER DETAILED SPECIFICATIONS IN TENDER DOCUMENT 58 SUP: PLC HOT AIR SEALING 12117- Each 2 995468 Yes UNIT DESIGN, MANUFACTURE, INSPECTION AND SUPPLY OF PLC BASED HOT AIR SEALING SYSTEM FOR SEALING THE LPG CYLINDERS OF 14.2 KG AND 19 KG WITH PVC SEALS. CAPACITY-2200 CYLS/HR @ 20-22 M/MIN CONVEYOR SPEED. 59 SUP: PORTABLE HOT AIR 12117- Each 3 Yes SEALING PORTABLE HOT AIR SEALING FOR 5/14.2/19/35/47.5 KG CYLINDERS 60 SUP: ULTRASONIC VALVE 12117- Each 1 Yes CLEANING ITEM DESCRIPTION:CLEANING MACHINE; TYPE:ULTRASONIC VALVE; FOR CLEANING MINIMUM 20 NOS. OF LPG SC VALVES AT A TIME USING PLAIN WATER MIXED WITH TEEPOL AS CLEANING MEDIUM CONSTRUCTED AS A SINGLE UNIT WITH CLEANING TANK AT TOP OF SS 304 GRADE MINIMUM 16 SWG STAINLESS STEEL PLATES AND MINIMUM 15 LITER CAPACITY 61 SUP: LOW VOLTAGE LAMP 12117- Each 1 Yes AS PER DETAILED SCOPE OF JOB ATTACHED. 62 SUP: L1 AND L8 GAUGE SET 12117- Each 1 Yes AS PER DETAILED SCOPE OF JOB ATTACHED. 63 E&C:CHAIN CONV SYS FOR 12117- Running Meter 875 998732 Yes 14.2/19 ERECTION, TESTING AND COMMISSIONING OF SUPPLIED CHAIN CONVEYOR SYSTEM FOR 14.2/19.0 KG INCLUDING SUPPLY OF NECESSARY FIRST QUALITY FOUNDATION/EXPANSION BOLTS, PREPARATION OF FOUNDATION POCKETS FOR INSTALLATION OF DRIVE SECTIONS, GROUTING THE POCKETS WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 64 E&C:ROLLER CONV FOR 12117- Running Meter 30 998732 Yes 14.2/19KG ERECTION, TESTING AND COMMISSIONING OF ROLLER CONVEYOR UNITS ALONG WITH ALL ACCESSORIES SUPPLIED INCLUDING SUPPLY OF NECESSARY FOUNDATION BOLTS, PREPARATION OF FOUNDATION POCKETS, GROUTING THE SAME WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 65 E&C:DOUBLE STOPPER ASSY 12117- Each 55 998739 Yes ERECTION, TESTING AND COMMISSIONING OF DOUBLE STOPPER ASSEMBLY INCLUDING SUPPLY OF NECESSARY NUT BOLTS, FOUNDATION BOLTS, FOUNDATION ETC. COMPLETE AS PER THE DETAILED TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 66 E&C:AUTO CONVER/DIVERT 12117- Each 13 998732 Yes INSTALLATION, TESTING AND COMMISSIONING OF PUSHER ASSEMBLY INCLUDING SUPPLY OF NECESSARY NUT BOLTS, FOUNDATION BOLTS, FOUNDATION ETC. COMPLETE AS PER THE DETAILED TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 67 E&C:PUSHER ASSY 12117- Each 6 998732 Yes INSTALLATION, TESTING AND COMMISSIONING OF AUTOMATIC DIVERGING/CONVERGING UNITS INCLUDING SUPPLY OF NECESSARY NUT BOLTS, FOUNDATION BOLTS, FOUNDATION ETC. COMPLETE AS PER THE DETAILED TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 68 E&C:TELESCOPIC 12117- Each 9 998732 Yes CONVEYOR-7.5m ERECTION, TESTING AND COMMISSIONING OF TELESCOPIC CONVEYORS INCLUDING SUPPLY OF NECESSARY FOUNDATION BOLTS, PREPARATION OF FOUNDATION POCKETS, GROUTING THE SAME WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 69 E&C:WASHING UNIT-2250 12117- Each 4 998739 Yes CYL/HR ERECTION, TESTING AND COMMISSIONING OF SUPPLIED 2250 CYLS/HR WASHING UNIT INCLUDING SUPPLY OF NECESSARY FOUNDATION BOLTS, PREPARATION OF FOUNDATION POCKETS, GROUTING THE SAME WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. THE NECESSARY FOUNDATION FOR INSTALLATION OF WASHING UNIT SHALL BE PROVIDED BY HPCL. HOWEVER, THE POCKETS FOR PROVIDING FOUNDATION BOLTS, IF ANY HAVE TO BE MADE AND GROUTED BY THE VENDOR. 70 E&C:AUTO CAP HAMMERING 12117- Each 2 998739 Yes 2250 CY ERECTION, TESTING AND COMMISSIONING OF SUPPLIED AUTO CAP HAMMERING MACHINE. 71 E&C:AUTO SQC ASSEMBLY 12117- Each 2 998732 Yes ERECTION, TESTING AND COMMISSIONING OF SUPPLIED STATISTICAL QUALITY CONTROL (SQC) ASSEMBLY (SCALE, CVT). 72 E&C:AUTO PURG SYS 1000 12117- Each 2 998732 Yes CYL/HR ERECTION, TESTING AND COMMISSIONING OF SUPPLIED AUTO PURGING SYSTEM 1000 CYL/HR. 73 E&C: MANUAL T- 12117- Each 16 Yes DIVERTOR14.2/19K AS PER DETAILED SCOPE OF JOB ATTACHED. 74 E&C: OF HELICAL DRIVE 12117- Each 84 998732 Yes UNITS ERECTION, TESTING AND COMMISSIONING OF SUPPLIED 2 TO 7.5 HP HELICAL DRIVES. 75 E&C: AUTO SOAP SOLUTION 12117- Each 1 998732 Yes INSTALLATION AND COMMISSIONING OF SOAP MIXING SYSTEM. 76 E&C:CHAIN CONV SYS 12117- Running Meter 225 998732 Yes 47.5/35KG ERECTION AND COMMISSIONING OF CHAIN CONVEYOR SYSTEM FOR 35/47.5 KG CYLINDER INCLUDING SUPPLY OF NECESSARY FIRST QUALITY FOUNDATION/EXPANSION BOLTS, PREPARATION OF FOUNDATION POCKET FOR INSTALLATION OF DRIVE SECTION, GROUTING THE POCKET WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 77 E&C:ROLLER CONV FOR 12117- Running Meter 20 998732 Yes 47.5/35KG ERECTION, TESTING AND COMMISSIONING OF ROLLER CONVEYOR SUPPLIED FOR 35/47.5KG CYLINDER INCLUDING SUPPLY OF NECESSARY FOUNDATION BOLTS, PREPARATION OF FOUNDATION POCKETS, GROUTING THE SAME WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 78 E&C: WASHING UNIT FOR 12117- Each 1 998739 Yes 47.5KG ERECTION, TESTING AND COMMISSIONING OF SUPPLIED WASHING UNIT FOR 35/47.5 KG CYLINDERS. 79 E&C: TILTING TEST BATH 12117- Set 1 998739 Yes 47.5KG ERECTION, TESTING AND COMMISSIONING OF DIP TEST BATH SUPPLIED FOR 35/47.5 KG CYLINDERS AS PER TECHNICAL SPECIFICATIONS AND SCOPE OF JOB GIVEN IN TENDER DOCUMENT. 80 E&C.47.5 KG PRE-FILLING 12117- Each 2 998739 Yes MACHIN ERECTION, TESTING AND COMMISSIONING OF SUPPLIED PREFILLING MACHINE FOR 35/47.5 KG CYLINDERS. 81 E&C. 47.5KG FILLING MACHINE 12117- Each 2 998739 Yes ERECTION AND COMMISSIONING FILLING MACHINE SUPPLIED FOR FILLING OF 35/47.5 KG CYLINDERS. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 82 E&C.ONLINE FLP CHK SCALE 12117- Each 1 998732 Yes 47.5K ERECTION, TESTING AND COMMISSIONING OF SUPPLIED ONLINE FLAME PROOF CHECK SCALE FOR 35/47.5 KG CYLINDERS. 83 E&C. SINGLE CVT WITH 12117- Each 2 998732 Yes STAND FOR ERECTION, TESTING AND COMMISSIONING OF SUPPLIED SINGLE CONTINUOUSLY VARIABLE TRANSMISSION (CVT) WITH STAND TESTING OF 35/47.5 KG CYLINDER. 84 E&C. SINGLE CVT WITH 12117- Each 2 998732 Yes STAND FOR ERECTION, TESTING AND COMMISSIONING OF SUPPLIED SINGLE CONTINUOUSLY VARIABLE TRANSMISSION (CVT) WITH STAND TESTING OF 35/47.5 KG CYLINDER. 85 E&C-ADJ SCALE FOR 47.5KG 12117- Each 1 998739 Yes ERECTION AND COMMISSIONING OF WEIGHT ADJUSTMENT SCALE: NEW ADJUSTMENT SCALE TO BE LAID AS PER THE INSTRUCTIONS FROM THE OFFICER IN CHARGE (OIC). THE JOB INCLUDES DESIGNING, FABRICATION, CUTTING, WELDING, GRINDING, ERECTION AND INSTALLATION OF THE CONVEYOR SECTIONS, DRILLING OF PROPER SIZE HOLES AND GROUTING. ALL TOOLS AND TACKLES AND OTHER CONSUMABLE ITEMS LIKE HI TENSILE NUT BOLTS, STUDS, CUTTING WHEEL, GRINDING WHEEL, WELDING ROD, DRILL BITS ETC., AND MANPOWER WILL HAVE TO BE ARRANGED BY THE PARTY FOR COMPLETE AIR AND LPG SUPPLY . 86 E&C.PUSHER UNIT 47.5KG 12117- Each 2 998732 Yes ERECTION, TESTING AND COMMISSIONING OF SUPPLIED PUSHER ASSEMBLY FOR 35/47.5 KG CYLINDERS. 87 E&C.STOPPER UNIT 47.5KG 12117- Each 6 998732 Yes ERECTION, TESTING AND COMMISSIONING OF SUPPLIED STOPPER ASSEMBLY FOR 35/47.5 KG CYLINDERS. 88 E&C:CHAIN CONV SYS 5KG 12117- Running Meter 225 998732 Yes ERECTION, TESTING AND COMMISSIONING OF SUPPLIED CHAIN CONVEYOR SYSTEM FOR 14.2/19.0 KG INCLUDING SUPPLY OF NECESSARY FIRST QUALITY FOUNDATION/EXPANSION BOLTS, PREPARATION OF FOUNDATION POCKETS FOR INSTALLATION OF DRIVE SECTIONS, GROUTING THE POCKETS WITH SPECIAL GROUTING CEMENT AS ADVISED BY HPCL. RATE TO INCLUDE TRANSPORTATION OF MATERIAL FROM HPCL STORES TO THE PLACE OF WORK. 89 E&C: WASHING UNIT FOR 5KG 12117- Each 1 Yes AS PER DETAILED SCOPE OF JOB ATTACHED. 90 E&C. 5KG FILLING MACHINE 12117- Each 5 Yes AS PER DETAILED SCOPE OF JOB ATTACHED. 91 E&C.ONLINE FLP CHK SCALE 12117- Each 1 Yes 5KG AS PER DETAILED SCOPE OF JOB ATTACHED. 92 E&C-ADJ SCALE FOR 5KG 12117- Each 1 Yes AS PER DETAILED SCOPE OF JOB ATTACHED. 93 E&C:TELESCOPIC 12117- Each 2 Yes CONVEYOR-7.5m AS PER DETAILED SCOPE OF JOB ATTACHED. 94 E&C: INLINE TEST BATH 5KG 12117- Each 1 Yes AS PER DETAILED SCOPE OF JOB ATTACHED. 95 E&C: CAP HAMMERING UNIT 12117- Each 1 998739 Yes 5KG ERECTION, TESTING AND COMMISSIONING OF SUPPLIED AUTO CAP HAMMERING MACHINE. 96 E&C:5KG SQC ASSEMBLY 12117- Each 1 998732 Yes ERECTION, TESTING AND COMMISSIONING OF SUPPLIED STATISTICAL QUALITY CONTROL (SQC) ASSEMBLY (SCALE, CVT). 97 E&C. 425KG FILLING MACHINE 12117- Each 1 Yes AS PER DETAILED SCOPE OF JOB ATTACHED. 98 E&C.ONLINE FLP CHK SCALE 12117- Each 1 Yes 425KG AS PER DETAILED SCOPE OF JOB ATTACHED. 99 E&C: MOTORIZED SCISSOR 12117- Each 2 Yes LIFT INSTALLATION OF SCISSOR LIFT, SERVICE VISIT FOR SCISSOR LIFT INSTALLATION, AS PER USER SPECIFICATIONS. 100 E&C: PURGING MACHINE 12117- Each 1 Yes 5/47.5/42 IT REQUIRES TO PURGE OUT THE AIR FROM THE CYLINDER AND PURGE IN LPG VAPOUR IN IT. 101 E&C.MANUAL EVACUATION 12117- Each 1 998717 Yes UNIT(2HE JOB INCLUDES DESIGN, FABRICATION AND INSTALLATION FOR 47.5/35 KG CYLINDER EVACUATION FACILITY WITH SUPPLY OF ALL MATERIALS VIZ, STRUCTURAL STEEL, BEARINGS AND HOUSINGS, PNEUMATIC CYLINDERS, PNEUMATIC CONTROLS IN ALL RESPECTS. 102 E&C.MANUAL EVACUATION 12117- Each 1 998717 Yes UNIT(2HE JOB INCLUDES DESIGN, FABRICATION AND INSTALLATION FOR 47.5/35 KG CYLINDER EVACUATION FACILITY WITH SUPPLY OF ALL MATERIALS VIZ, STRUCTURAL STEEL, BEARINGS AND HOUSINGS, PNEUMATIC CYLINDERS, PNEUMATIC CONTROLS IN ALL RESPECTS. 103 E&C: DE-PRESSURISING UNIT 12117- Each 2 Yes 4HEA AS PER DETAILED SCOPE OF JOB ATTACHED. 104 E&C: VALVE UN-SCREWING 12117- Each 1 Yes UNIT ON E&C: VALVE ON/OFF SCREWER FOR 14.2/19KG CYLINDERS 105 E&C: VALVE UN-SCREWING 12117- Each 1 Yes UNIT OF E&C: VALVE ON/OFF SCREWER FOR 14.2/19KG CYLINDERS 106 E&C: DE-GASSING UNIT, 5 12117- Each 1 998732 Yes HEAD, ERECTION, TESTING AND COMMISSIONING OF SUPPLIED DEGASSING UNIT. 107 E&C: DE-GASSING UNIT, 2 12117- Each 1 998732 Yes HEAD, ERECTION, TESTING AND COMMISSIONING OF SUPPLIED DEGASSING UNIT. 108 E&C: DE-GASSING UNIT, 2 12117- Each 1 998732 Yes HEAD, ERECTION, TESTING AND COMMISSIONING OF SUPPLIED DEGASSING UNIT. 109 E&C: HYDRO PRESSURE 12117- Each 1 Yes TESTING UN ERECTION AND COMMISSIONING OF NON TILTING TYPE HYDRO PRESSURE TESTING UNIT OF CAPACITY 120 CYL./HR. SUITABLE FOR HANDLING 10 CYLINDERS AT A TIME WITH FLP MOTOR, LOW PRESSURE AND HIGH PRESSURE PUMPS, WATER AND AIR TANKS OF SUITABLE CAPACITY, NECESSARY FILLING GUNS, HOSES, CONTROL VALVES, PNEUMATIC ACCESSORIES, CONTROL PANEL, PRESSURE GAUGES ETC. COMPLETE AS PER THE TECHNICAL SPECIFICATIONS OF TENDER DOCUMENT AND AS ADVISED BY HPCL. 110 E&C: CYLINDER INTERNAL 12117- Each 1 Yes VACUUM AS PER DETAILED SCOPE OF JOB ATTACHED. 111 E&C: PAINTING 12117- Each 1 998732 Yes BOOTH(PRIMARY) ERECTION, TESTING AND COMMISSIONING OF SUPPLIED AUTO PAINT BOOTH. 112 E&C: OVERHEAD CONVEYOR 12117- Meters 250 Yes CONVEYOR; TYPE:OVERHEAD 113 E&C: PAINTING 12117- Each 1 998732 Yes BOOTH(FINISHED) ERECTION, TESTING AND COMMISSIONING OF SUPPLIED AUTO PAINT BOOTH. 114 E&C: VALVE SCREWING UNIT 12117- Each 1 Yes (HYDR E&C: VALVE ON/OFF SCREWER FOR 14.2/19KG CYLINDERS 115 E&C: HIGH PRESSURE AIR 12117- Each 1 Yes COMPRES ERECTION AND COMMISSIONING HIGH PRESSURE AIR COMPRESSOR 12 KG/CM2: INSTALLATION OF AIR COMPRESSOR AS PER DETAILED DESCRIPTION PROVIDED IN SCHEDULE OF QUANTITY. 116 E&C: PN. PRESSURE TESTING 12117- Each 1 998732 Yes UNIT ERECTION, TESTING AND COMMISSIONING OF SUPPLIED CYLINDER PNEUMATIC TESTING UNIT. 117 E&C: VP RING, FOOT RING 12117- Lump Sum 1 998732 Yes COLD R INSTALLATION & COMMISSIONING 118 E&C: CYLINDER CRUSHING 12117- Each 1 998732 Yes UNIT ERECTION, TESTING AND COMMISSIONING OF SUPPLIED CYLINDER CRUSHING UNIT.

E&C: PORTABLE WEIGHING — WEIGHING SCALE; TYPE:PORTABLE; CAPACITY:100 KG; ADDITIONAL INFORMATION:NON-FLAME PROOF; WITH TROLLEY MOUNTED 120 E&C: CYLINDER PUNCHING 12117- Each 1 Yes MACHINE ERECTION AND COMMISSIONING CYLINDER PUNCHING MACHINE, AS PER DETAILED SPECIFICATIONS IN TENDER DOCUMENT. 121 E&C: PLC HOT AIR SEALING 12117- Each 2 Yes UNIT E&C: PLC HOT AIR SEALING M/C FOR 14.2/19KG CYLINDERS 122 E&C: PLC HOT AIR SEALING 12117- Each 1 Yes UNIT E&C: PLC HOT AIR SEALING M/C FOR 14.2/19KG CYLINDERS 123 E&C: PORTABLE HOT AIR 12117- Each 3 Yes SEALING PORTABLE HOT AIR SEALING FOR 5/14.2/19/35/47.5 KG CYLINDERS 124 E&C: ULTRASONIC VALVE 12117- Each 1 Yes CLEANING ERECTION AND COMMISSIONING, INSTALLATION OF SUPPLIED ULTRASONIC VALVE SALVAGING MACHINE INCLUDING ITS SHIFTING AS PER DIRECTIONS OF ENGINEER-IN-CHARGE, LAYING OF CABLE TILL A DISTANCE OF 1 M IS IN HPCL SCOPE. 125 E&C: TEST BATH FOR 12117- Set 1 998739 Yes 14.2/19KG ERECTION, TESTING AND COMMISSIONING OF TILED TYPE TEST BATH SUPPLIED FOR 14.2/19 KG CYLINDERS OF CAPACITY MINIMUM 2200 CYL/HR. AS PER TECHNICAL SPECIFICATIONS AND SCOPE OF JOB GIVEN IN TENDER DOCUMENT. 126 E&C. 24 HEAD ELECTRONIC 12117- Each 2 998732 Yes CAROUS ERECTION AND COMMISSIONING OF 24 HEAD ELECTRONIC CAROUSEL. 127 E&C. CHECK SCALE FOR 12117- Each 2 998732 Yes ELECTRONI ERECTION AND COMMISSIONING OF ELECTRONIC CHECK SCALE SUPPLIED ALONG WITH 24 HEAD ELECTRONIC CAROUSEL. 128 E&C : ONLINE AUTO ADJUST 12117- Each 2 998732 Yes SCALE ERECTION, TESTING AND COMMISSIONING OF SUPPLIED AUTO ADJUSTMENT SCALE. 129 E&C. VALVE LEAK DETECTOR 12117- Each 2 998739 Yes ERECTION AND COMMISSIONING OF VALVE LEAK DETECTOR. 130 E&C. VALVE LEAK DETECTOR 12117- Each 1 998739 Yes - 5KG ERECTION AND COMMISSIONING OF VALVE LEAK DETECTOR. 131 E&C. O-RING LEAK DETECTOR 12117- Each 2 998739 Yes ERECTION AND COMMISSIONING OF O-RING LEAK DETECTOR. 132 E&C. O-RING LEAK DETECTOR 12117- Each 1 998739 Yes - 5K ERECTION AND COMMISSIONING OF O-RING LEAK DETECTOR. 133 E&C. VISION READER UNIT 12117- Each 2 998732 Yes ERECTION AND COMMISSIONING OF VISION UNIT. 134 "E&C. VALVE CH.MC AND 12117- Each 4 998739 Yes WEIGHTC ERECTION AND COMMISSIONING OF VALVE CHANGING MACHINE WITHOUT EVACUATION OF LPG CYLINDER. 135 REM&REERC: CHAIN 12117- Running Meter 50 Yes CONVEYOR CONVEYOR SECTION- RE-ERECTION