REPAIR TO STROM WATER DRAIN, PATH AND COMPOUND WALL AT DRDO ESTATE UNDER AGE B/R PASHAN

Amount

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins,pillars,arches etc, and clearing off the premises, complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster on brick / concrete / stone surface including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Cement concrete 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base etc, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 but except stone, complete all as specified and as directed by Engineer-in-Charge.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression 20 mm on face from straight edge held against the dressed surface Granite or Trap Stone, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for keyed pointing to random rubble, uncoursed or brought upto courses in CM 1:3, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Rendering 20mm thick on stone masonary surfaces, other than fair faces of brick work or on one side of lathing finished even and smooth without using extra cement, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Pre-cast cement concrete block masonry type C1 1:3:6 (20 mm graded aggregate)with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), complete all as specified and directed.

Material and labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 with old size bricks, complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in copping including necessary form work complete all as specified and directed.

Material and labour for Providing PCC (1:24) type B1 using 20 mm graded aggregate as in surface Channel of drain etc complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by the Engineer-in-Charge.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, Complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, as in trenches, walls, sweep hole etc complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed

Material and labour for 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) as in sub base etc finished all as specified and directed.

Material and Labour Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

Material and Labour for cement concrete paving tiles 300x 300 x 25 mm thick, rubber moulded with white cement and pigments set, jointed in neat slurry in floors, and cut and polished complete all as specified and directed.

Demolition of cement concrete (unreinforced ) n.exc 15cm thickness (below or above ground level) and removing debris from site complete all as spcified and directed.

Material and labour for Cement concrete 1:2:4, type B -1 (using 20mm graded stone aggregate) 100 mm thick as in hardstanding, Complete all as specified and as directed by Engineer-in-Charge.

Dismantling of wrought iron and steel work of any description and in any position as any fencing grills, Complete all as specified and as directed by Engineer-in-Charge.

Material and labour for MS angle posts, struts in fencing including cutting to shape as directed and drilling holes, notching for wire etc, flat iron fillets, bolts etc including all necessary drilling, bolting, riveting, welding etc and similar work conforming to Fe 290-) or grade E-165, Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fix in Hard drawn steel wire fabric, mesh size 50mm x 3.0mm dia each way , weight n. exc 4Kg per sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia, Complete all as specified and as directed by Engineer-in-Charge.

Material & labour for preparation of new steel surfaces of any description not otherwise described exc 10cm in width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for rendering 5mm thick in CM 1:4 on fair faces of concrete surfaces, brick work etc finished even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge

M/S NILESH BUILDERS (BID ID -3156917)

AJAY ENTERPRISES (BID ID -3156483)

VIRENDRA FABRICATORS (BID ID -3156492)

M/S SAMRUDHI CONSTRUCTION (BID ID -3156478)

M/s S.R lahoti (BID ID -3156231)

sanjay m. suryawanshi (BID ID -3156197)

S.K.HARAL (BID ID -3156458)