GE/DE-65/2020-21

Amount

Demolition, Cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness below or above ground level, complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facings, complete all as specified and as directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5Sqm each and removing to store, complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each and removing to store, complete all as specified and as directed.

Taking down shutters of any description exceeding 1Sqm and not exceeding 2Sqm each, complete all as specified and as directed.

Dismantling Asbestos cement/Fibre glass translucent (corrugated, semi corrugated, etc.) sheets in roof coverings, complete all as specified and as directed.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.

Dismantling wall & ceiling boards (fibre, insulation etc.) or insulation boards, slabs, blankets any thickness including cover fillets, complete all as specified and as directed.

Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate, as in kerb stones, mud stops and similar items including weathering, slightly rounded or chamfered angles and throating on top of chajjas, rails, cills etc., including necessary form work required if any, complete all as specified and as directed.

PCC 1:2:4 type B-2 using 40mm graded crushed stone aggregate as in surface channels and drains. complete all as specified and directed.

Brickwork with sub class `B` bricks, in straight or curved on plan exceeding 6m mean radius, built in CM 1:6, complete all as specified and as directed.

18 to 20mm thick Granite slab (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platform and the like, bedded and jointed in cement mortar 1:4 and pointed with white cement with admixture of pigment to match with shade of Granite laid over bedding layer of 15mm thick cement mortar 1:4, complete all as specified and as directed.

19-20mm thick Pre-laminated particle board, exterior grade, with decorative choice lamination on one side and balancing white on the other, fixed with screws to timber frame work including dismantling boarding of any description, fixed in cup boards, showcases, utensil racks and similar type of items, including cover fillets if any, complete all as specified and as directed.

6mm thick Teak wood beading 18/19mm fixed with head less nails, complete all as specified and as directed.

35mm thick flush shutters factory made solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and as directed.

Glazed and Skelton shutters using 2nd class hard wood, 30mm thick open rebated and prepared to receive glass or gauge etc., edges of framing plain and chamfered or fitted with cut or mitered beads for securing glass or gauze, size of member of shutter as specified in SSR Part-I section 8, clause 8.23(a) and divided in square complete all as specified and as directed.

Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube supplying and fixing in opening as per specification & drawing complete all as specified and as directed.

Factory made solid PVC moulded door shutter 30mm thick (style ) consisting of frame made out of M.S frame shall be covered with heat moulded plain colour PVC'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rail with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification, complete all as specified and as directed.

Fancy type Brass handles 100mm size fixed with screws, complete all as specified and as directed.

Continuous piano type hinges, mild steel bright finish or electro-galvanised with width of flaps 30mm, complete all as specified and as directed.

30mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished, complete all as specified and as directed.

100 mm size but hinges medium weight cold rolled mild steel fixed complete all as specified and as directed.

150mm size aluminium anodized, barrel tower bolts of extruded section complete all as specified and as directed.

150mm size aluminium anodized, handles cast type, complete all as specified and as directed.

250 mm size aluminium alloy anodised sliding door bolt with haps, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, fixed in repair complete all as specified and as directed.

Aluminium (die cast) body door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80 kg, fixed in repairs, complete all as specified and as directed.

Floor door stopper of 150mm size of alluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in repairs, complete all as specified and as directed

Galvanised mild steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, ixed in repairs, complete all as specified and as directed.

Aluminium alloy powder coated (50 micron) anodized door frame of section 100mm x 44 mm x 2 mm thick, door shutter of aluminium section of size 85 mm x 44 mm x 2 mm thick, top rail and both styles of size 100 mm x 44 mm x 2 mm thick, lock rail and bottom rail of size 115 mm x 44 mm x 2mm thick incl aluminium anodized snap beading and rubber packing & 5.5 mm thick colour designer glass incl 200 mm long tower bolt-2 Nos, 200 mm long Alm handle -02 Nos on each leaf, 4 lever lock brass 100 mm long mortice lock (Make :- Godrej), & double action floor door spring(Sandhu/Samrat) heavy duty suitable for 1 m wide shutter for each leaf, complete all as specified and as directed.

Aluminium alloy powder coated any tint standard hollow section with special powder coated coloured or any tint window frame with one glazed shutter (fixed) and two Nos glazed and wire gauged shutter sliding type with aluminium section as per series A(15mm) 3 track of Jindal section number of sliding windows, with framed shutter including aluminium alloy powder coated snap type beads handles aluminium powder coated barrel tower bolts & glazing clips. joints cleats rubber gaskets etc compl all as specified including provision of 5.5 mm thick tinted glass of superior quality and stainless steel wire cloth of 0.36 mm nominal dia wire and average width of aperture 1.4 mm and aluminium grill including all standard fittings, complete all as specified and as directed.

Aluminium alloy powder coated (50 micron) anodized frame of section 85mm x 44mm x 2mm thick as in aluminium partition including aluminium anodized snap beading and rubber packing, partly glazed with 5mm thick tinted glass and partly with 12mm thick prelaminated particle board, fixed in repairs, complete all as specified and as directed.

Hand rails, half round or other stock section or core for wooden hand-rail straight portion drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall/ridge, fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed.

Fibre glass reinforced translucent corrugated sheeting 2 mm thick with two corrugations side lap fixed with L-type or J-type or cranked hook bolts, complete all as specified and as directed.

Taking down existing roof treatment any type including screed bed, if any and hacking for key, scrubbing down wih water including cleaning and clearing roof of all the rubbish. Rendering on top of concrete roofs with 15mm thick cement mortar in 1:4. Cleaning the plastered surface after drying from dirt, mortar, dust mortar buds, algae and all other foreign matter and brushed and wiped. Apply evenly a coat of bituminous primer conforming to IS- 3384 @ 0.4Kg/Sqm. Over the primed surface apply a coat of hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 1.2 Kg/Sqm of the surface area. applying APP based polymeric mambrane minimum weighting 3kg/sqm and minimum 3mm thick reiforced with polyster non wove febric ( wt.not less than 150grm/sqm ). APP membrane will be laid across the slope from lowest line of roof towards ridge with over laps of 75mm in length side and 100mm on the width side of membrane bonded with hot blown bitumen. Over the APP membrane apply semi hot blown 85/25 penetration grade bitumen conforming to IS- 702 @ 0.5 Kg/Sqm and provide final layer of 20mm screed bed in cement mortar 20mm thick. complete all as specified and as directed.

Provision of false celling 4mm thick eco board (Make: Everest) size 595x595mm fixed on GI powder coated Tee or L section (snap grid of GI frame work of size 600 x 600 mm) suspended from ceiling with GI wire 3mm thick or self screws, including one coat of OBD on one side of board complete all as specified and as per manufacturer's instructions comprising of the following:- (a) Cross tee size 29x24.7x0.8mm (b) Wall angle 22.2 x 22.2 x 0.65mm.

40 mm thick plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in flooring and finished to an even and smooth surface without using extra cement, complete all as specified and as directed.

50 mm thick plain cement concrete 1:4:8 type D-2, using 40mm graded crushed stone aggregate as in sub base finished even and fair, complete all as specified and as directed.

75 MM thick plain Cement Concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) finished even and fair at top without using extra cement and providing joints 40mm deep and 12 mm wide in plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as and as directed.

Machine cut kota stone slab 18 to 20 mm thick as in flooring laid over and including cement screed base 15mm thick in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed

Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished, area of tiles not exceeding 0.36Sqm each in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Vibro compacted Precast concrete interlocking paver blocks, factory made,any shape and size conforming to IS- 15658- 2006 of 60mm thick, M-35 Grade set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors laid over 30mm thick sand cushioning including dismantling old paver blocks set in cement mortar, complete all as specified and as directed.

Pre-polished coloured chequered cement concrete tiles, factory made, Premium quality 300mm x 300mm x 25mm thick, set, jointed in neat cement slurry and pointed flush with grey cement mixed with pigments to match colour of blocks in floors over 15 mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling old tiles set in cement mortar, complete all as specified and as directed.

Non-Skid coloured ceramic tiles 6 to 7mm thick (square/rectangular) area of each tiles exceeding 0.11Sqm but not exceeding 0.18 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed

Glazed ceramic tiles in vertical surface 300mm x 450mm x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in cement mortar 1:4 including dismantling of old tiles with backing, complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:6 finished even and smooth without using extra cement, complete all as specified and as directed.

Rendering 15mm thick cement plastering in cement mortar 1:4 on brick/concrete surface of walls including finished even and smooth without using extra cement, complete all as specified and as directed.

Preparation of old decorated surface of ceilings (plastered or unplastered) by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss efflorescence oiled/greasy spots and applying one coat of white wash on ceiling in multistoried bldgs, complete all as specified and as directed.

Applying one coat of JK/Birla white putty upto 2mm thickness on walls/ceiling complete all as specified and as directed.

Complete removal of existing treatment from old decorated surfaces of walls by mechanised sander of Berger paints or equivalent make with Express sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of plastic emulsion paint, complete all as specified and as directed.

Preparation of old decorated surfaces of walls (plastered or unplastered) cornices, pillasters etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss efflorescence oiled/greasy spots including removal of nails, stickers etc. and filling nail holes, cracks and finishing surfaces of walls with one coat of oil bound distemper, complete all as specified and as directed.

Preparation of old decorated surfaces of walls (plastered or unplastered) cornices, pillasters etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss efflorescence oiled/greasy spots including removal of nails, stickers etc. and filling nail holes, cracks and finishing surfaces of walls with one coat of cement based paint, complete all as specified and as directed.

Preparation of old decorated surfaces of walls (plastered or unplastered) cornices, pillasters etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss efflorescence oiled/greasy spots including removal of nails, stickers etc. and filling nail holes, cracks and finishing surfaces of walls with one coat of weather shield exterior acrylic emulsion paint, complete all as specified and as directed.

Preparation of newly plastered or unplastered surface of walls and applying two coats of oil bound distemper over a coat of primer as on walls, complete all as specified and as directed.

Preparation of newly plastered surfaces of walls and applying two coat of cement based paint, complete all as specified and as directed.

Preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.

Preparation of old painted wooden surface and applying one coat of synthetic enamel paint, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frame, glazed with putty or fixed with board complete all as specified and as directed.

Sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs including taking down old tubing, complete all as specified and as directed.

Sand cast iron soil waste and vent pipes 75mm dia, in any length, with cement joints, laid in trenches including necessary excavation and earth work conforming to IS-1729, complete all as specified and as directed.

110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls an in rain water pipes, complete all as specified and as directed.

PVC (SWR) bend of 110mm bore any radius, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 500 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve, including dismantling of existing tank, complete all as specified and as directed.

Three layered heavy duty blow moulded Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position having 20mm dia PVC float valve, including dismantling of existing tank, complete all as specified and as directed.

20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed minimum weight -210gms, fixed in repairs, complete all as specified and as directed.

Vitreous china wash down closet pan (pedestal pattern), white with "S" trap, including plastic seat and cover and connecting to outgoing pipe, flush pipe and anti syphonage pipe, fixed in repairs, complete all as specified and as directed.

Vitreous china squatting pan ‘Orissa’ pattern size 580 x 440 mm white with integral foot rests including P or S trap including provn of lime concrete bedding including connections to flushing cistern/pipe, fixed in repairs, complete all as specified and as directed.

Vitreous china wash hand basin, white flat back size 550mm x 450mm including waste pipe, brackets and 32mm dia bore CP coupling, complete fixed in repairs, complete all as specified and as directed.

Seat cover best quality for cascade type WC, white of composite model with closed pattern type including steel hinging device, fixed in repairs, complete all as specified and as directed by Engr-in-Charge at site.

PVC valve less syphonic action type coloured flushing cistern, low level, 10 litres capacity including flush pipe PVC connection, float valve, PVC handle/button and connections complete including taking down old unserviceable flushing cistern any type, fixed in repairs, complete all as specified and as directed.

15mm bore PVC connection of size 600mm long 15mm bore with PTMT end nuts, fixed in repairs, complete all as specified and as directed.

Tubular towel rail 'D' type 20mm dia, chromium plated brass 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats, fixed in repairs, complete all as specified and as directed.

Hand shower Maze Hand Shower 95mm x 95mm Square Shape Single Flow (Face Plate Stainless Steel & ABS Body in Chrome finish), fixed in repairs to 15mm bore pipe, complete all as specified and as directed. (Make : Jaquar Cat Part No.- HSH-CHR-1655 or equivalent in Hindware/Cera/Somany).

Angle stop cock CP brass with flange Fancy type, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No- KUP-35053PM or equivalent in Hindware/Cera/Somany).

CP brass towel rail 600mm long fixed to wall with CP screws fixed in repairs complete all as specified and as directed. (Make : Jaquar, Cat Part No-ACN-1111NM or equivalent in Hindware/Cera/Somany).

CP brass towel ring fixed to wall with CP screws fixed in repairs complete all as specified and as directed. (Make : Jaquar, Cat Part No-ACN-1121BN or equivalent in Hindware/Cera/Somany).

Pillar tap, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot" or "cold" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15mm, fixed in repairs, complete all as specified and as directed.

Angle valve of brass (concealed type) fancy type, chromium plated with long shank cast copper alloy screwed down high pressure with capstan head for iron pipe 15mm bore, fixed in repairs, complete all as specified and as directed.

CP brass Sink Mixer With Regular Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-LYR-38309 or equivalent in Hindware/Cera/Somany).

CP brass WHB Mixer Single Lever Extended Basin Mixer (Height-85mm) with Popup Waste System with 450mm Long Braided Hoses fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-FUS-29052B or equivalent in Hindware/Cera/Somany).

CP brass Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-FUS-29267 or equivalent in Hindware/Cera/Somany).

15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed in repairs, complete all as specified and as directed.

CP tumbler holder fixed to wall with CP screws fixed in repairs complete all as specified and as directed. (Make : Jaquar, Cat Part No-AQN-7741 or equivalent in Hindware/Cera/Somany).

15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed . (Minimum weight 15mm-90gms / 20mm-125gms), fixed in repairs, complete all as specified and as directed.

15mm bore two way bib tap chromium plated brass, Fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No. KUP-35041PM or equivalent in Hindware/Cera/Somany).

Sheet glass shelf assembly of 600mm size consisting of 5.5mm thick sheet glass shelf with chromium plated brass brackets guard and railing, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-ACN-1171N or equivalent in Hindware/Cera/Somany).

Sheet glass corner shelf assembly of 300 mm consisting of 5.5mm thick sheet glass shelf with chromium plated brass brackets guard and railing, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-ACN-1173 or equivalent in Hindware/Cera/Somany).

CP brass towel rack 600mm long fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-ACN-1181S or equivalent in Hindware/Cera/Somany).

Two way concealed stop cocks with basin spout (composite one piece body), fixed in repairs, complete all as specified and as directed. (Jaquar Cat Part No KUP-35433PM or equivalent in Hindware/Cera/Somany).

Overhead Shower 200X200mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System to 15mm bore pipe, complete all as specified and as directed. (Make : Jaquar Cat Part No.- OHS-35497 or equivalent in Hindware/Cera/Somany).

Soap dish , fancy type, fixed to walls with chromium plated brass screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-AQN-7731or equivalent in Hindware/Cera/Somany).

CP toilet paper holder with stainless steel fixed to wall with CP screws, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Part No-APN-35751P or equivalent in Hindware/Cera/Somany).

CP bottle trap with connection fixed to wall with CP screws & connection to tap, fixed in repairs, complete all as specified and as directed. (Make : Jaquar, Cat Pt No-ALD-769L or equivalent in Hindware/Cera/Somany).

Vitreous chinaware table top wash hand basin (WHB) of size 595mm x 440mm x 185mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe etc., fixed in repairs, complete all as specified and as directed, (Make : Jaquar Cat Part No : KUS-WHT-35901 or equivalent in Hindware/Cera/Somany).

Single piece WC with UF soft close seat cover, Hinges, Fixing Accessories Set and Accessories Set, Cistern fittings, Size: 366 x 655 x 765mm, S Trap-300mm vitreous china, pedestal pattern European type 32 mm dia PVC flush pipe and connection to drain, fixed in repairs, complete all as specified and as directed, (Make : Jaquar Cat Part No LYS-WHT-38851S or equivalent in Hindware/Cera/Somany).

CP brass jet spray with PVC pipe, fixed in repairs, complete all as specified and as directed.

CP brass health faucet with connection fixed to wall with CP screws & connection to tap, fixed in repairs, complete all as specified and as directed, (Make : Jaquar Cat Part No-ALD-CHR 593N or equivalent in Hindware/Cera/Somany).

Soap dispenser with metallic bottle, fixed in repairs, complete all as specified and as directed. (Make : Jaquar Cat Part No ACN-1137N or equivalent in Hindware/Cera/Somany).

Sinks with draining board made of stainless steel 1.0mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x 330mm x 160mm, fixed in repairs, complete all as specified and as directed.

5.0mm thick looking mirror of required size as directed by Engineer-in-Charge fixed on walls by drilling holes in the mirror with dash fasteners and chromium plated screws purposefully made, complete all as specified and as directed.

Brass spindle suitable for 15mm bore bib tap, mixer, stop cock, concealed stop cock, angle cock, fixed in repairs, complete all as specified and as directed.

Day time manning by 01 carpenter, 01 plumber in 1 shifts per day along with complete tradesmen and T&P which will report to Parade Ground service center for attending day-today complaints, complete all as specified and as directed.

NOTE: a) The above task shall be caried out by deploying a team of 01 carpenter, 01 plumber on all days including Sundays and Holidays between 0900 Hrs to 1700Hrs, in the pocket of Parade Ground Service Centre. All trades men engaged by contractor shall report to concerned JE (Civil) at the said service centre before 900 Hrs daily for assignment of tasks to be performed by them during the day. b) All T&P equipment, minor stores like nails, screws, threads washers, M-Seal & white cement etc., and safety gear shall be provided by the contractors, however stores shall be provided by the department against subject item of work. c) Daily attendance shall be maintained in the Attendance Register by the JE concerned and a recovery for absent period shall be made @ Rs 1000/- per person per day. All relevent record shall be maintained by the contractor and to be submitted before making any payment duly signed by Engineer-in-Charge & JE concerned.

NOTE:- For minimum fair wages ,EPF and payment to labour employed, refer Sch A Note No-17,18 and Special Condition No 5 & 21.2 of this tender. Contractor must produce all the relevent record such as payment made to labour, EPF etc at the time of payment of RARs/Final bill. No payment will be released to contrator without producing the proper record.

NOTE:- Irrespective of whatever specified elsewhere in tender documents, all the debris/waste materials produced out of above mentioned work shall be removed out of Cantonement land and disposed off at locations notified by the Delhi Cantonment Board for disposal of waste building materials within NCR area, without any extra cost to Department under own arrangement of contractors. The rates quoted by the contractors against the items catered here-in-above in the BOQ are inclusive of said provision.

MAA SANTOSHI ENTERPRISES

R. S. Associates

M/S Yamin

aggarwal engineers contractors