Loading
Loading…
Loading…
Tender Value
₹2.1 Cr
EMD Value
₹4.1 L
Closing Date
30 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
EAST
14 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N OR 'V' Whichever is less; where. V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per ANNEXURE-XXXIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Trenching,Cable laying,Location and /or signal foundation/erection/termination/wiring in connection with any signalling work
8 conditions · 1 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tender document, Scope of work & GCC 2022 are attached with the tender.
Signalling works in connection with CTR/TTR works in EAST section of Mumbai Division.
CR-BB-SNT-EAST-2026-38
CR-BB-SNT-EAST-2026-38
Open
Works - General
12 Months
Mumbai, Maharashtra
₹0
₹4.1 L
30 Apr 2026
8 Apr 2026
16 Apr 2026
46 items across 1 schedule · ₹1,83,28,888.52 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Set of nylon cable ties, One set consist 02 items 94000 nos. 1) Nylon cable tie size 100x2.5 mm Qty 88000 Nos. 2) Nylon cable tie size 150x3.6 mm Qty 6000 Nos. (Note Each type of nylon cable ties to be supplied in packets of 100n nos. only)(Inspection Agency- Consignee) | Set | 5.00 | 12,680.28 | 63,401.4 |
| 2 | Supply of portable drilling machine ( cycle Machine) for rail web suitable for holding 7-8 mm drill bit.One item should be get approved from consignee before bulk supply. (Inspection Agency-Consignee) | Numbers | 10.00 | 14,233.58 | 1,42,335.8 |
| 3 | Fluke Hand Held 100 KHz Digital True RMS Multimeter Fluke 287 or Fluke 289(Inspection Agency-Consignee) | Numbers | 2.00 | 87,629.63 | 1,75,259.26 |
| 4 | Digital multimeter with all the accessories as per Specification-A make Fluke-101, (Inspection Agency-Consignee) | Numbers | 4.00 | 3,575.46 | 14,301.84 |
| 5 | Supply of Megger 100V, 50 ohms hand driven type in Metal body with handle of Nippen, Motwani, Fluke or Rishabh make.(Inspection Agency-Consignee) | Numbers | 10.00 | 3,044.5 | 30,444.96 |
| 6 | Battery operated High performance LED area with 3000 lumens output light weight & unbreakable as per specification attached (1) Product specification M18 HAL -+ M18 NRG 502B (2) Article No. 493345123 (3) Battery compatibility all Milwaukee M18 Batteries (4) Battery capacity (Ah) 5.0 (5) Battery type Li ion (6) No of Battery charger supplied 01 No. (7) Full Battey charging time 59 min (8) Max light output 3000/1500/650 (9) Max run time battery 2/4/9 hr. (10) No. of batteries supplied 2 Nos. (11) Voltage (AC) (V) 220-240 (12) Voltage (DC) (V) 18 (13 Wight with battery pack (kg) 3 (14) One year onsite warranty, installation & training free of cost mak Eibenstock/Milwaukee or equivalent.(Inspection Agency-Consignee) | Numbers | 4.00 | 59,365.66 | 2,37,462.64 |
| 7 | Supply of Microcontroller based programmable static switching module of Naturally air-cooled only with an at a glance LCD display suitable for break-less switching between two DC supplies of upto 40 A for 20-110 VDC . (Inspection Agency-Consignee) | Numbers | 5.00 | 65,917.16 | 3,29,585.8 |
| 8 | 110 V DC motors with gear box IP 67 type (complete motor should be water proofed ) 400 V AC immunity for Siemens make Point machine drg.no. C-RT-PM4-A132-01- 06(Inspection Agency-Consignee) | Numbers | 5.00 | 65,205.11 | 3,26,025.55 |
| 9 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade)10mm x 50 mm SS full threaded(Inspection Agency-Consignee) | Numbers | 1000.00 | 16.81 | 16,810 |
| 10 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 12mm x 125mm SS full threaded(Inspection Agency-Consignee) | Numbers | 1000.00 | 24.56 | 24,560 |
| 11 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 12mm x 40mm SS half threaded(Inspection Agency-Consignee) | Numbers | 1000.00 | 18.1 | 18,100 |
| 12 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 18mm x 90mm SS half threaded(Inspection Agency-Consignee) | Numbers | 900.00 | 29.73 | 26,757 |
| 13 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 18mm x 65mm SS half threaded(Inspection Agency-Consignee) | Numbers | 900.00 | 25.86 | 23,274 |
| 14 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 16mm x 65mm SS half threaded(Inspection Agency-Consignee) | Numbers | 900.00 | 23.27 | 20,943 |
| 15 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 20mm x 65mm SS half threaded(Inspection Agency-Consignee) | Numbers | 900.00 | 33.61 | 30,249 |
| 16 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 12mm x 65mm SS half threaded(Inspection Agency-Consignee) | Numbers | 900.00 | 20.68 | 18,612 |
| 17 | Supply of SS nut bolts set for point machine, gauge plate fixing as per annexure A (Material SS -304 Grade) 18mm x 80mm SS half threaded(Inspection Agency-Consignee) | Numbers | 900.00 | 27.15 | 24,435 |
| 18 | WELD LESS MODULAR TYPE SS MEDUIM SIZE LOCATION BOX(Inspection Agency-Consignee) | Numbers | 3.00 | 89,252.5 | 2,67,757.5 |
| 19 | WELD LESS MODULAR TYPE SS POST BOX LOCATION BOX(Inspection Agency-Consignee) | Numbers | 3.00 | 83,239 | 2,49,717 |
| 20 | Supply of 62mm outside diameter inner dia 50 mm DWC pipe of wall thickness minimum 2mm as per IS 14151 of 1994 with latest amendment if any, suitable for taking track lead wire of AFTC (Orange colour) flange type(Inspection Agency-Consignee) | Metre | 60.00 | 107.43 | 6,445.8 |
| 21 | Supply of DWC/ HDPE pipe with onesnap fit coupler O ring confirming to IS 14930 (Part 2: 2001) non metalic, normal duty, pliable with protection against chemical attack and fire resistant anti rodent, in 6 meter length of size 50 mm inner dia. (Inspection Agency- Consignee) | Metre | 1000.00 | 389.76 | 3,89,760 |
| 22 | Repairing of location foundation with masonarywork. This also includescleaning the locations, sandfilling in the location andplastering inside the location(Inspection Agency-Consignee) | Numbers | 80.00 | 2,647.02 | 2,11,761.6 |
| 23 | Execution of S & T work related to enginnering/Signalling block ofCTR/TTR/TSR or others, inone block, five unskilledmanpower have to beprovided during block for S&Tconnection removing &refixing as per Railway siteengineer instruction.(Inspection Agency-Consignee) | Job | 600.00 | 3,971.52 | 23,82,912 |
| 24 | Casting of cement concrete to protect S&T equipments and laid cables, above pipes etc by concrete mixture of cement, sand, stone in theratio of 1:2:4 using 25 mmgraded stone aggregate asper instruction of site incharge of railways. Concreteis to be casted with the helpof suitable size shutteringform as per site requirement.Concrete is to be cured for sufficient time as per standard practices on railways(Inspection Agency-Consignee) | cum | 50.00 | 3,780 | 1,89,000 |
| 25 | Heavy duty portable single phase inverter welding machine as per Technical specification attached(Inspection Agency-Consignee) | Numbers | 2.00 | 35,555.76 | 71,111.52 |
| 26 | Track side Electronic Unit (EAK) for MSDAC as per RDSO Spec No.: RDSO/SPN/176/2013 Ver.-3 Make:ELDYNE only.(Inspection Agency-RDSO) | Numbers | 4.00 | 2,62,043.07 | 10,48,172.28 |
| 27 | "Supply of Analog card (AzLM) for Eldyne make Multi section digital Axle counter(MSDAC) as per RDSO/SPN/176/2013 or latest.(Inspection Agency-RDSO)" | Numbers | 6.00 | 1,88,842.26 | 11,33,053.56 |
| 28 | Motherboard for MSDAC part no. 3CRo1838AAAA make Eldyne(Inspection Agency-RDSO) | Numbers | 7.00 | 50,265.01 | 3,51,855.07 |
| 29 | Supply of Serial I/O card for Eldyne make MSDAC (Thales make) as per RDSO specification RDSO/SPN/176/2013 ver 3 & manufacturer specification (Part no 3 CR 01881RAA)2(Inspection Agency-RDSO) | Numbers | 4.00 | 89,467.92 | 3,57,871.68 |
| 30 | PARALLEL Card for Eldyne make MSDAC (Thales make) as per RDSO Specification No. RDSO/SPN/176/2005 or latest(Inspection Agency-RDSO) | Numbers | 4.00 | 78,422.2 | 3,13,688.8 |
| 31 | PDCU for Multi section digital axle counter (MSDAC) as per RDSO/SPN/176/2005 Make Eldyne electro System Pvt. Ltd. (Inspection Agency-RDSO) | Numbers | 20.00 | 25,373.07 | 5,07,461.4 |
| 32 | Supply of Spares ISDN Card for Eldyne Multi Section Digital Axle Counter (MSDAC) as per RDSO/SPN/176/2005 or latest make Thales C/o Eldyne. Make Eldyne Electro System Pvt. Ltd. Of Spares of ISDN Card For ELDYNE Multy Section DIGITAL AXLE COUNTER MASDAC as per RDSO/SPN /176/2005 or Latest Make Thales C/O Eldyne Make Electro System(Inspection Agency-RDSO) | Numbers | 4.00 | 2,26,320.46 | 9,05,281.84 |
| 33 | Wheel detection sensor with 10 meter cable for SiemensMSDAC(Inspection Agency-RDSO) | Numbers | 6.00 | 2,20,316.76 | 13,21,900.56 |
| 34 | " Block Input Output card(BLEA Card) for Siemens make MSDAC as per RDSO specification no.RDSO/SPN/176/2013 Ver. 3. (Inspection Agency-RDSO) | Numbers | 4.00 | 1,95,899.2 | 7,83,596.8 |
| 35 | Supply of STEU card suitable for MSDAC Siemens make. FIRMS OFFER MAKE / BRAND- SIEMENS(Inspection Agency-RDSO) | Numbers | 4.00 | 89,008.73 | 3,56,034.92 |
| 36 | "Amplifier Trigger and Bandpass Filter Board (VESBA Card ) Individual Module of Central Evaluator for Siemens MSDAC as per RDSO/SPN/176/2013 Ver. 3.0 & Manufactures Specification SIEMENS Make. (Inspection Agency-RDSO)" | Numbers | 4.00 | 1,52,248.48 | 6,08,993.92 |
| 37 | Broad Band Transformer suitable for MSDAC Siemens Make.(Inspection Agency-RDSO) | Numbers | 4.00 | 1,05,797.31 | 4,23,189.24 |
| 38 | SIRIUS CARD for Multi Section Digital Axle Counter Siemens make RDSO specification No.RDSO/SPN/176/2013 Ver.3 or latest Make/Brand: SIEMENS(Inspection Agency- RDSO) | Numbers | 4.00 | 1,74,336.53 | 6,97,346.12 |
| 39 | Processing and monitoring board (VAU CARD) for Siemens make Multi Section Digital Axle Counter as per RDSO specification No. RDSO/SPN/176/2013 ver.3.(Inspection Agency- RDSO) | Numbers | 4.00 | 1,66,477.25 | 6,65,909 |
| 40 | GENERATOR CARD(S)(Inspection Agency- RDSO) | Numbers | 4.00 | 1,04,453.88 | 4,17,815.52 |
| 41 | Supply of counting head ZP 43 V complete with sensor for Siemens make MSDAC(Inspection Agency-RDSO) | Numbers | 4.00 | 3,45,785.81 | 13,83,143.24 |
| 42 | Design, supply and manufacturing of static switch as per drawing no MRVC/S&T/16(Inspection Agency-RDSO) | Numbers | 10.00 | 53,336 | 5,33,360 |
| 43 | Panel push button for Siemens 2019s signal panel with contact making assembly of various colour Red, Grey, Blue, Yellow & Blue white dot complete.(Inspection Agency-Consignee) | Numbers | 2400.00 | 39.05 | 93,720 |
| 44 | Fencing section for Location boxes 4.5 ftx1.0ft (Running feet) As per Rly Drg. No. RST 12103 Rev A(Inspection Agency-Consignee) | Square Foot | 1500.00 | 674.48 | 10,11,720 |
| 45 | I-Beam (100mmx50mmx6mm) of 6 ft height for the support of location box fencing Rly. Drg. No. RST 12103 Rev. A(Inspection Agency- Consignee) | Numbers | 50.00 | 1,096.03 | 54,801.5 |
| 46 | Lumpsum installation charges for fencing of location boxes including concreting work for one site(Inspection Agency-Consignee) | Numbers | 10.00 | 6,895.04 | 68,950.4 |
| Schedule total | ₹1,83,28,888.52 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed.pdf GCC CORRECTION SLIP 1 TO 11
ATTACHMENT
FINALNEWTENDERDOC2026-38.pdf
ATTACHMENT
CORRECTIONSLIP1to11GCC2022_compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .