Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.3 LAccepted-AOC | L1 | Accepted-AOC aoc | |
| 2 | L2₹21.7 L+₹1.1 L (5.29%)Rejected-Finance NAV PUKHARI ROAD MILLAN PALLY PO DIST TINSUKIA ASSAM 786 125 | TINSUKIA | DIBRUGARH | ASSAM | 786125 | L2 | Rejected-Finance Being other than lowest | |
| 3 | L3₹22.1 L+₹1.5 L (7.04%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Being other than lowest | |
| 4 | L4₹22.1 L+₹1.5 L (7.44%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest | |
| 5 | L5₹22.4 L+₹1.8 L (8.78%)Rejected-Finance COLLEGE ROAD CHABUA PO CHABUA DIST DIBRUGARH ASSAM 786184 | DIBRUGARH | ASSAM | 786184 | L5 | Rejected-Finance Being other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
18 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Mohanbari
Garrison Engineer AF Mohanbari Mohanbari Post Dibrugarh Assam 786012
WELCOME MAINTENANCE TO OMQs, SMQs AND SLA AT AIR FORCE STATION DINJAN UNDER GE(AF) MOHANBARI
2022_MES_525581_1
8001/373/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) Mohanbari
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Mohanbari
₹40,000
Yes
11 Jul 2022
21 May 2022
20 Jun 2022
21 May 2022
18 Jun 2022
4 Jun 2022
60 days
Amount
Material and labour for preparation of old plastered or unplastered surfaces of walls by brooming down or with steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc., of drops and splashes complete all as specified .
Material and labour for preparation of old plastered or unplastered surfaces of ceiling by brooming down or with steel wire brushing ; scrapping down smoke soot , moulds, moss and efflorescent salts and treating oil and greasy spots and applying one coat of white wash on old decorated surfaces of ceiling including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for preparation of old decorated distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and distempering walls by applying one coat of acrylic based distemper emulsion of any tint/shade complete all as specified.
Material and labour for preparation of old surfaces of walls by complete removal of existing treatment and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Preparation of old decorated surface distempered surfaces of ceilings by washing, rubbing down and stopping of distempered and painted surfaces and distempering ceilings by applying one coat of distemper oil emulsion of any tint/shade complete all as specified.
Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, over 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as directed.
Material and labour for preparation of old painted wooden /wood based materials surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and painting one coat with synthetic enamel paint (1st quality) including cleaning, stopping and rubbing down and removing all dropings etc. all as directed.
Material and labour for preparation of old painted steel and iron surfaces of any description , not otherwise described,over 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.
Material and labour for preparation old painted steel and iron surfaces of any description , not otherwise described, not exceeding 10 cm width or girth and painting one coat with synthetic enamel paint including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.
Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site to any distance outside MD land complete all as specified and directed.
M & L for providing 40 mm thick cement concrete (1:2:4) type B-1 Nominal Mix (using 20 mm thick graded stone aggregate) as in floor, laid in panels and position to conform to design and finishing top surface even and smooth withot using extra cement complete all as specified and directed.
Material and labour for Plain cement concrete type C2 (1:3:6), using 40 mm graded crushed stone aggregate,75 mm thick , as as in path / plinth protection/paving finished even and smooth with out using extra cement complete all as specified.
Supplying Glass dividing strips , 3 mm thick 38 mm wide and inserting in position to conform to designand complete all as specified.
Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished materialfrom work site complete all as specified.
Material and labour for Brickwork with old size sub class 'B' locally available bricks, having compressive strength 75Kg/sqcm, straight or curved on plan exc 6 M mean radius built in cement and sand mortar 1:6 complete all as specified.
Material and labour for Brickwork with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement and sand mortar 1:4 complete all as specified.
Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc.including removing of rubbished material from work site complete all as specified.
Material and Labour for rendering 15 mm thick on brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:6 all as specified and directed.
Material and labour for preparation of new surfaces of walls and applying wall care white putty thickness not less than 2mm and sand papering surfaces to achieve smooth surfaces and applying two coats of acrylic based distemper emulsion over a coat of cement based primer, white or tinted including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour fo preparation of new plastered or unplastered surafces of walls and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 surfaces finished even and smooth without using extra cement complete all as specified.
M & L for preparing newly plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer of any tint/shade including washing floors, etc of drops and splashes complete all as specified and directed.
M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceilings of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.
Material and labour fo preparation of new plastered or unplastered surafces of ceiling and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
S&F in repair 50mm dia polished hardwood knobs of cupboard fixed with screw etc. complete all as specified.
Material and labour for 2nd Class Hardwood not exceeding 3 sq cm in Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads complete all as specified.
S&F in repairs aluminium body ( extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified.
Hacking out old broken glass ( any thickness , size , quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.
Supply and fixing 4 mm thick (nominal) Sheet glass, ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.
Supply and fixing 3 mm thick figured glass, pin head type and ordinary quality , in squares, not exceeding 0.50 sqm each each pane fixed with oil putty complete all as specified.
Supply and fixed in repairs Galvanised steel wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.
S&F ball valve 20mm high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed 15mm -142gms complete all as directed
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), in floors, aprons etc .laid dry or laid dry and pointed including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.
M & L for Non skid ceramic coloured tiles (square / rectangular) of 7 to 8mm thick (premium quality), area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes finished even and rough complete all as specified and directed.
M & L for Glazed ceramic white tiles of size 300 mm X 200 mm X 7 mm thick as on vertical surfaces such as skirting, dados and rises to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile including 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces and finishing the surface even and fair complete all as specified and directed.
Material and labour for vitrified ceramic (square/rectangular) dark shade coloured polished tiles, (1st quality) area of each tiles not exc 0.36 sqm and 7 to 8 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white cement and pigment to match over 15 mm thick screeding in CM 1:4 complete all as specified (Note: Screed bed shall not be measured and paid separately).
Material and labour for Non Skid ceramic coloured tiles (1st quality) 7 to 8mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screeding in CM 1:6 complete all as specified ( Note: Screed bed shall not be measured and paid separately).
Cleaning of over head tank and taking out of scale and dirts from inside the tank and from the mouth of circulating pipes etc and washing with bleaching powder and again washing with clean water tank capacity upto 500 litre complete all as specified.
Cleaning of over head tank and taking out of scale and dirts from inside the tank and from the mouth of circulating pipes etc and washing with bleaching powder and again washing with clean water tank capacity exc 500 litres not exceeding 1000 litre complete all as specified.
Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified
Dismantling PVC water tanks exceeding 500 litres but not exceeding 1000 litres capacity, including removing ball valve and removing unserviceable tank from work site complete all as specified
Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity of specifications as per MES Schedule 2009, Part – I (ISI Marked) including 15 mm bore ball valve ,hoisted and fixed in position complete all as specified.
Supply and fixed rotational moulded poly-ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity of specifications as per MES Schedule 2009, Part – I (ISI Marked) including 20 mm bore ball valve ,hoisted and fixed in position complete all as specified.
Supply and fixed in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete , screwed for 15 mm bore dia. pipe or brass ferrule complete all as specified.
Supply and fixing in repairs PVC valveless, syphonic action type flushing cistern of capacity 9-10 litres, low level, white with inlet, ball valve, float and handle including brackets and connection to pipe complete all as specified and directed by Engineer-in-charge.
Supply and fixed in repairs vitreous china wash basin (WHB) , white , flat back , size 550 mm x 400 mm (1st quality) including brackets, waste fittings , brass Chromium plated for glazed basins etc. with long screw shanks and fly nuts , flange end embedded in red lead cement , including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply pipe and supply of taps complete all as specified
Supply and fixed in repair sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long which necessary or directed.
Supply and fixed in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete including removing demolished material from work site all as specified and directed.
Material and labour 20 mm thick Granite ( of any type) work ( table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screeding in CM 1:4 complete all as specified.( Note Screed bed shall not be measured and paid separately).
Supply and fixed in repairs stainless steel sink with draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 355 mm x 165 mm completecomplete all as specified.
Supply and fixed in repairs stainless steel sink without draining board , made out of 1mm thick sheet for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 495 mm x 420 mm with bowl size 410 mm x 355 mm x 165 mm completecomplete all as specified.
Supply and fixed in repairs Cast Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union in repairs complete all as specified.
Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition and removing demolished material from site etc. complete all as specified and directed.
M & L for providing pre-cast cement concrete landing, cover slabs (for man holes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar items with plain faces in cement concrete 1:2:4 type B-1, using 20 mm graded stone aggregate and set in cement mortar 1:6 complete all as specified and directed.
Material and labour for Mild steel deformed or twisted bars(TMT) 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or higher complete all as specified and directed.
Supply and fixed in repairs, central hole basin mixer swan neck, cast copper alloy with capstan head , chromium plated screwed down, high pressure with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.
Supply and fixing in repair Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with115 mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower) complete all as specified.
S&F in repairs waste pipe 32 mm bore Low density Polyethylene pipes ( LDPE) minimum length 600 mmof pressure rating 6 Kgf/cm sq fixed to wash basin / sinks as waste pipe complete all as specified.
Supply and fixed in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as diredted.
Supply and fixing in repair drapery rods, coloured, standard quality , PVC coated not less than 25 mm dia. With heads at both ends and middle support ,ring etc complete all as specified and directed.
Supply and fixing in repair glass corner shelf fancy type complete all as specified.
Supply and fixing in repairs aluminium anodized Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges complete all as specified.
Supply and fixing in repairs of angle valve(stop valve) 15 mm dia CP fancy type, with long screwed shank and cup, cast copper alloy, screwed both ends for iron pipe or for unions complete all as specified and directed all as specified and directed.
Supply and fixed in repairs, CP fancy type Bib taps, cast copper alloy with crutch handle, screwed for 15 mm bore dia. iron pipe or for brass ferrule and fixed complete all as specified.
Supply and fixed in repairs,15mm dia pilllar tap fancy type cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm)
Supply and fixed in repairs vitreous China white wash down water closet (padestal pattern) , plastic water closet seat, black, closed pattern with recessed bottom and cover and mild steel CP hinging device, polyethylene flush pipe of low or high density 32 mm dia for cistern complete all as specified
Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
Supply and fixed in repairs vitreous China with Squatting pan, Orissa' pattern size 580 mm x 440mm with integral footrests water closet) with 'P' or 'S' trap front or back inlet complete including lime concrete for beeding, connection to drain pipe and to flushing pipe, anti syphonage pipe etc complete all as specified.
Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each and refixing the same after rescuring / easing complete all as specified.
Demolition of existing roof treatment complete of any description and in any position not otherwise specifically provided including removing rubbish material from work site at any distance all as specified.
Material and labour for plain cement concrete type B-0 (1:2:4), using 12.5 mm graded crushed stone aggregate, as in benching/ padding of roof slab to maintain slope complete all as specified.
Material and labour for 15 mm thick screed plaster on RCC slab CM 1:4 with using liquid water proofing compound @ 200 ml per 50 kg bag of cement all as specified. Note: WPC shall be measured and paid seperately under respective item.
Material and Labour for preparation of the roof surface by thoroghly wire brushing, washing, drying up and cleaning of all foreign materials and dust and applying one coat of approved bituminous primer @ 0.25 Ltr/sqm confirming to IS - 3384-1986 and then applying 3 mm thick weight not less than 3.5 kg/sqm, APP modified polymeric membrane non woven fabric to be laid by torch application method, laid with over laps of 100mm joints of traverse direction and 75mm at longitudinal direction duly thermofused by flame torch all as specified in application manual of the company. The top surface shall be finished by a coat of aluminium paint @ 110gm/sqm complete all as specified and as directed.
Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.
Supply and fixing in repairs aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt complete all as specified.
Supply and Fixing in repairs aluminium handle cast type anodised 125 mm size etc complete all as specified and directed.
Taking up or down steel tubing and connection for 15 mm bore pipe complete all as specified.
Taking up or down steel tubing and connection for 20 mm bore pipe complete all as specified.
Supply and fixing for GI tubing medium grade 15 mm bore with all fittings fixed to walls, ceilings or laid in trenches complete all as specified.
Supply and fixing for GI tubing medium grade 20 mm bore with all fittings fixed to walls, ceilings or laid in trenches complete all as specified.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified.
M/s Pramillabh Construction
M/S CHAKRA GOHAIN
D B Construction
M/s PRABIR ENTERPRISE
HIND CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .