PERIODICAL SERVICES IN VARIOUS BUILDINGS, REPAIR/MAINT OF FALSE ROOFING AND ALLIED WORKS, REPAIRS/MAINT OF JOINERY AND CONNECTED WORKS AT KV AREA AND REPAIR/MAINT OF OLD/UNSERVICEABLE/DAMAGED DISTRIBUTION BOXES, SHEETS METAL ENCLOSURES, SUB MAINS ALO

Amount

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each., complete all as specified and directed.

Taking down shutter of any description n. exc. 1 Sqm each and refixing in same opening, complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm but n.exc 2 Sqm each, complete all as specified and directed.

S&F 125X60mm size factory madepressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 105X60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

M & L PCC (1:2:4) type B0, (using 12.5mm graded crushed stone aggregate) as in door frame filling, bed plate, fixing of hold fast etc, complete all as specified and directed.

S&F 2nd class hardwood plain,solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, wire mesh etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc., complete all as specified and directed. (Note: Wiremesh shall be measured and paid seperately)

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

M&L 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F in repair 25mm prelam wooden finished PVC plastic celluka ply for self cupboard etc including all required accessories and builder hardware as per direction, complete all as specified and directed.

S&F in repair 18mm prelam wooden finished PVC plastic celluka ply for self cupboard etc including all required accessories and builder hardware as per direction, complete all as specified and directed.

S&F in repairs 15mm thick second class hard wood boarding clean sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc, complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each and refixing in the same opening after necessary repair work, complete all as specified and directed.

Taking down shutter of any description not exceeding 1 sqm each and n. exc 2 sqm each and refixing in the same opening, complete all as specified and directed.

S&F 100mm size long MS butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F 75mm long, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolt of extruded section, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed.

S & F 300mm long MS, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

S&F MS clamps, hold fast, hook. washer & similar small articles comfirming to Fe-290 Gde-E-165, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded, complete all as specified and as directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded, complete all as specified and as directed.

S&F steel ventilator with top hung shutter (ISI marked) including hinges steel peg stay, complete all as specified and as directed.

S&F MS framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed

All as per itme No 33.00 here-in-before but metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane, complete all as specified and as directed.

M&L preparation of new or previously untreated wooden surface any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F 100mm size hasp & staple, safety type, aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screw, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed.

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and as directed.

M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605x605 mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary demolition/dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section in any position, complete all as specified and directed.

M&L for 6mm thick plywood grade BWR type BB, fixed with nails to timnber frame work in ceiling including dismantling of old unserviceable boarding, any description, fixed in any position, complete all as specified and directed

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.

M&L for fillet in 2nd class hardwood exc 6 n exc 13sqcm bull-nosed, splayed, chamfered or rounded on one edge or face including dismantling of old unserviceable fillets from frame work, complete all as specified and directed.

M&L for 2nd class hardwood wrought scantling, complete all as specified and directed.

Demolition of cement concrete unreinforced of any description and in any postion not otherwise specifically provided for, complete all as specified and directed.

M&L PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in walls or retaining wall any thickness, size or shape including pilasters, buttresses, columns, pillars, boundery pillar and posts (including caps & bases), complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified including dismantling of old unserviceable CGI sheets, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified including dismantling of old unserviceable PGI sheets, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc.including racking out joints,hacking for key scrubing down with water&receive plaster upto double story height, complete all as specified and as directed.

M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces of wall, finished fair and even, complete all as specified and directed.

M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces of wall, finished fair and even, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall of any description and applying two coats of oil bound distemper over a coat of chalk whiting, complete all as specified and directed.

M&L for preparation of newly plastered surfaces on wall of any description and applying with two coats cement base paint over a coat alkali resistance primer, complete all as specified and directed.

M & L for preparing old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot and applying one coat of white wash including cornices, complete all as specified and directed.

M & L for preparing old decorated surfaces of ceiling by brooming down or steel wire brushing, scraping down smoke soot and applying one coat of white wash, complete all as specified and directed.

M & L for preparing old decorated surfaces of walls by brooming down or steel wire brushing, scraping down smoke soot and applying one coat of distemper oil emulsion, complete all as specified and directed.

M & L for preparing old decorated surfaces of walls by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil & greasy spots and applying two coats of distemper oil emulsion, complete all as specified and directed.

M & L for preparing old decorated surfaces of wall/chajja by brooming down and applying one coat of cement base paint, complete all as specified and directed.

M & L for preparing old decorated surfaces of wall/chajja by brooming down or by steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and applying two coat of cement base paint, complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint ((1st grade quality)), complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint ((1st grade quality)), complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M & L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M & L for preparing old decorated surface of walls and applying one coat of weather proof exterior emulsion paint of approved colour and shade as per manufacturer's instruction, complete all as specified and directed.

M & L for complete removal of existing treatment of any type from surfaces of walls/ceiling over and including applying 2mm thick wall care putty to obtain a smooth surface including making good any undulations on the surfaces, complete all as specified and directed.

M & L for preparing newly applied surface of wall care putty on walls by sand paper , remove spots etc. and applying two coats of distemper oil emulsion, complete all as specified and directed.

M & L for obliterating old writing of any description, not exceeding 0.1 Sqm, with synthetic enamel paint to match existing work, complete all as specified and directed.

M & L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm high with synthetic enamel paint, complete all as specified and directed.

M & L for writing stops, commas, short lines, dashes, hyphens, brackets etc with synthetic enamel paint, complete all as specified and directed.

Taking down carefully point wiring of any type, size and description from hard/ teak wood batten/through pipes/casing capping (light, fan, sockets and socket outlets etc) including removal of battens, pipes, plug sockets, socket outlets, switches, shades, ceiling roses, light fittings etc. complete and making good the disturbed surface to match with existing, complete all as specified and directed.

M & L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLSH type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC concealed conduit 'medium grade' ISI marked including all conduit accessories on concealed wiring including concealed pressed steel terminal box of required size factory made with top cover of ISI Marked plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site & including chases cutting & making good disturbed surface & applying finishes to match existing surface etc for one light/fan point controlled by one, one way switch single pole, complete all as specified and directed.

All as per itme No 75.00 here-in-before but one light point controlled by two, two way switch, complete all as specified and directed.

All as per itme No 75.00 here-in-before but one bell/ buzzer point controlled by one push button on independent board, complete all as specified and directed. Note for item No 75.00 to 77.00 Rate for chases cutting for inserting of conduit shall deemed to be inclued in the unit quoted rates.

M&L for switch piano flush button single pole one way 6 amps 240 volts, complete all as specified and directed.

M & L for bell push, flush type 5 A, complete all as specified and directed.

M & L for two way switch, flush type 5A, complete all as specified and directed.

M & L for bell electric heavy duty ding dong type, AC 230 volts, single pole, complete all as specified and directed.

M & L ceiling rose, 3 phase/PVC/ polycarbonate, isolated body, complete all as specified and directed.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn in and including heavy duty PVC casing-caping/PVC conduit not less than 20mm size including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly including taking down old unserviceable sub-main wiring of any description, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC casing-caping/PVC conduit and its accessories is deemed to be included in the unit quoted rate.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 4 Sqmm drawn in and including heavy duty PVC casing-caping/PVC conduit not less than 20mm size including 4 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly including takinf down old unserviceable sub-main wiring of any description, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC casing-caping/PVC conduit and its accessories is deemed to be included in the unit quoted rate.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Single Pole & Neutral (SPN), suitable for 8 way, 240 volts, IP 43 & IK 09 fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F sheet metal enclosure for double door MCB DBs, phosphatised, powder coated, Triple Pole & Neutral (TPN), suitable for 4 way, 415 volts, IP 43 & IK 09 with metal door fixed on wall with din rail, neutral and earth bar, in proper position, complete all as specified and directed.

S&F MCB Triple Pole and Neutral (TPN) of capacity 65 to 70 Amps, 415 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB Single Pole and Neutral (SPN) of capacity 50 to 63 Amps, 240 Volts, breaking capacity 10 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

S&F MCB SP of capacity 6 to 32 Amps, 240 Volts, breaking capacity 1 0 KA, ‘C’ series, fixed in proper position, complete all as specified and directed.

Cutting chases, pinning in, making good to facings in stone concrete wall / blocks / slab where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting exc 10cm but n.exc 20cm girth, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3cm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20mm bore and watering pipe GI medium grade of 20mm bore and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC (1:3:6) type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed. Notes : (i) Proper earthing pit should be provided with pit cover. (ii) GI earth wire upto 7.5m is demed included in the unit rate.

Taking down existing light fitting carefully, set aside and re-fixing after wiring work, complete all as specified and directed.

S&F 25mm nominal bore GI pipe brackets made out of medium grade pipe of required length not less than 1.00m consisting mounting brackets made out of mild steel FI 25x6 mm required shape (two Nos per GI pipe brackets) duly fitted with 4 Nos Mild steel nuts, bolts and washers in walls /poles etc. and painting with two coats of synthetic enamelled paint over one coat of red oxide zinc chrome primer including taking out existing unserviceable GI braket of (any shape/size) from building, complete all as specified and directed.

S&F LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection including taking down old unserviceable street light fitting of any capacity, complete all as specified and directed.

S & F LED bulkhead light fitting 10 Watt, pressure die cast aluminium housing, IP 65 complete with electronic driver and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose including taking down old bulk head fittings, complete all as specified and directed.

S&F LED Flood light 50 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete with polycarbonate junction box and connecting wire copper 1.0 sqmm 3 core up to junction box and hanging arrangment on wall / floor including taking down old flood light of any capacity, complete all as specified and directed.

Note: An amount of Rs.50,120.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. NARENDRA KUMAR GARG

M/S BIJAY KUMAR SHIVA

M/S SARDAR MAL NAHATA

CONSTRUCTION SHELTER

BHARAT ELECTRIC

M/S BISHAL ENTERPRISES

M/S RATHIN ENTERPRISES