TCMC - Repair and Maintenance of UGSS,Water Supply Motor, Starters and Generators in Zone II

Removal and Refixing of centrifugal purnpset/Jet pumps/submersible pumpsets and its accessories from borewellj open well for attending repairs 50% of the rates mentioned under item 17 (a), 17 (b) and (c) may be allowed for the respective

Submersible Pumpset -Upto 3HP

Submersible Pumpset -Above 3 to 7.5 HP

Submersible Pumpset -Above 7.50 HP to 20 HP

Submersible Pumpset -Above 20 HP to 30 HP

Submersible Pumpset -Above 30 HP to 40 HP

Submersible Pumpset -Above 40 HP to 50 HP

Submersible Pumpset -Above 50 HP to 60 HP

Submersible Pumpset -Above 60 HP to 70 HP

Submersible Pumpset -Above 70 HP to 80 HP

Submersible Pumpset -Above 80 HP to 120HP

Submersible Pumpset -Above 120 HP to 150HP

Oil Seal Changing /Ball Bearing / Servicing -Upto 3HP

Oil Seal Changing /Ball Bearing / Servicing -Above 3 to 7.5 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 7.50 HP to 20 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 20 HP to 30 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 30 HP to 40 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 40 HP to 50 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 50 HP to 60 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 60 HP to 70 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 70 HP to 80 HP

Oil Seal Changing /Ball Bearing / Servicing -Above 80 HP to 120HP

Oil Seal Changing /Ball Bearing / Servicing -Above 120 HP to 150HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Upto 3HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 3 to 7.5 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 7.50 HP to 20 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 20 HP to 30 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 30 HP to 40 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 40 HP to 50 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 50 HP to 60 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 60 HP to 70 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 70 HP to 80 HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 80 HP to 120HP

Coil Rewinding Submersible/ centrifugal/Non Clog Pumpset -Above 120 HP to 150HP

capacitors range 80 mfd to 120 mfd

capacitors range 35 mfd to 40 mfd

Removal servising and recondition of Belt typr and Mono Type Air compressot Pump including Bore Lath work Coil Rewinding Replacement of Bearing and Oil Seal all material and Labour charges etc complete

Supply and fixing of following Three phase contactor and over load relay replacing capacitors and Ammeter etc including all labour charges

contactor range 9 A

contactor range 12 A

contactor range 18 A

contactor range 22 A

OLR Range 5 to 10 A

OLR Range 10 to 20 A

OLR Range 20 to 30 A

40mm HDPE Hose

40mm HDPE SS Coller /40mm HDPE Hose Clip

32mm HDPE Hose

32mm HDPE SS Coller /32mm HDPE Hose Clip

20mm PVC Tap

32mm G.M.Gate Valve

3core 2.50 Sqmm Flat Cable

3core 4 Sqmm Flat Cable

Supply and Fixng of Single Pole 6A to 32A, 10KA MCB

Supply and Fixing of centrifugal Pumpset Pully

Providing Routine Annual Service Maintenance of DC Generator requires periodic cleaning, lubrication, inspection of brushes and commutator, and testing of brush spring tension. In addition, the electrical connections need attention to ensure clean metal to metal contact and tightnes. Visually and manually inspect the condition of all cables,clamps, wiring and terminal connections. See the generator drive pulley is tight on the shaft and that the belt is in good condition and adjusted properly. etc complete Rates are only for Labour exept materials

200 to 100 KVA Gen-set

63 to 15 KVA Gen-Set