SPECIAL REPAIR TO BUILT IN KITCHEN IN OFFR MD ACCN IN KHETRAPAL ENCLAVE TIBRI MIL STATION AND OFFR MD ACCN NO NP1/1 and NP 49 UNDER GE GURDASPUR

Amount

Dismantling brick tiles laid in single layer jointed & pointed in cement mortar complete all as specified.

Demolition of mud phuska in roofs, any thickness, including leeping plaster (whether full thickness removed or only a part thereof) complete all as specified.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roof padding ,roof kerbs or mud stops,and like including weathering slight rounded and throating complete all as specified and directed

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and directed

S&F (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application along the length of 100mm lapping strip to either sides and sealed in after cleaning down the roof by brooms complete all as specified and directed.

M&L for 40 mm thick brick tiles laid on 15mm thick cement mortar 1:6 and joints grouted flush in cement mortar ( 1:3) mixed with 5 % of crude oil by weight of cement complete all as specified and directed

All a per Srl item No 6 here-in-before but except tiles (old serviceable tiles obtained from dismantling) shall be reused after necessary cleaning of mortar)

Cement concrete (1:2:4), type B-0 using 12.5mm graded stone aggregate as in benching, kerbs, mud stop, rounded or chamfered on edges including form work complete all as specified.

Dismantaling of brickwork, built in cement mortar ,seperation ,cleaning and stacking of serviceable bricks for reuse and removal of debris rubbish to a distance exc 400 m, but not exc 500 m compl all as specified all as specified and directed

M&L for Brick work with sub class "B: bricks straight or curved on plan exc 6 m mean radius in CM 1:4.

All as per item No 10 here-in-Before but except bricks (old serviceable bricks obtained from dismantaling shall be reused after necessary cleaning of mortar)

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc

M&L for Rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using WPC 2% of weight of cement and finishing even and smooth without using extra cement complete all as specified and directed. (WPC measured and paid saperatly)

All as per Item No 13 here-in-before above but in CM 1:6.

M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over coat of primer and putty as required on cieling complete all as specified.

M&L for preparation of new plastered surfaces and applying three coats of white wash over coat of primer on ceiling complete all as specified.

Cutting down plants shrubbs girth n.exc 15cm from roof top of external wall of bldg chajjas bwall etc incl taking down of old penetrated roots in the wall slab surfaces saft and applying STUFALO solution as per manufacturer instruction in and around the surfaces and making good loct with PCC 1:2:4 incl necessary scaffolding upto 3.5 mtr ht of GL all as specified and directed

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of eight 3 kfg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of wheater proof emulsion paint to match with existing surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

All as per Description of item No 22 above but exc 1.5 sqm and n. exc. 4 sqm each complete all as specified & directed

Taking down window and ventilator any description of size complete all as specified and directed

Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm single rebated outer frame, comprises gauged skelton shutter frame of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of wire gauge including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below and all as shown on drg No CEJZ/TD-1019/08 & CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 complete. (a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf. Note :- Guard bars, wire mesh and painting shall be measured and paid sperately.

Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified. NOTE : , Guard bar, Sheet glass and painting shall be measured and paid Separately.

S & F pressed steel frames 1.25 mm thick for door size of frame 125x 60 mm with singles or doubles rebates incl necessary fixing lugs hinges lock strike plates and filling of chowkat with pcc 1:B39: type C 1 USING 20 MM GRADE stone aggregate and for filling of hold fast and tarring to inner surface of chowkat and hinges and filling and compl all as specified and directed

Description as per item No 27 above but of size of 105x 60mm

S & F factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides compl all as specified and directed.

S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed

M&L Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site .

S&F GI wire cloth, 0.56 mm nominal dia. of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed

S&F 3 mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm complete all as specified.

All as per item No 33 above but figured glass pin head type and glazing with oil putty

S&F 300mm long Mild steel, sliding door bolt stove enameled black with sliding door bolt not less than 12mm dia incl min of 6 bolts and nuts four on bolts place and two on staple compl all as specified and directed

S&F Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed

S&F 150mm long Aluminium handles, cast type anodised

S&F Aluminium alloy body and tongue and roller plate floor door stopper of 150mm size fixed with steel screws complete all as specified.

S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate.

M&L two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces

M&L two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described including prepration of previously untreated surfaces.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) and disposal of unserviceable tiles to a distance n. exc 100 m compl all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

S&F non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

S&F glazed ceramic coloured tiles 450mmx300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

M&L Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:6 complete all as specified.

M&L Granite work (of any type) (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite (Black) over and including 15mm thick rendering in CM 1:4.

Supplying and fixing in replacement vitreous chinaware wash down water closet (padestal pattern)compl incl 10 ltr capacity pvc valves symponic action type flushing cistern low level with inlet ball valve float and handle brackets flushing pipe ,seat cover connecting to trap and making good floor finish complete all as specified and directed .

S&F in repair for Vitreous china squatting pan of (Orisa Pattern) size 440x580 mm white with ‘P’ or ‘S’ trap front or back inlet and integral foot rest including 10 ltr capacity PVC valve less symponic action type flushing cistern low level with inlet ball valve float and handle brackets PVC flushing pipe 32 mm Dia connecting to trap and making good floor finish complete all as specified and directed .

S&F Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified.

S&F PVC connection 15mm size with PTMT nuts of length 600mm.

Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr and supply anf fixing of rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including S&F 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod complete all as specified and directed

Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified

Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified

S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified.

Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified.

Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified.

S&F in repair 15mm bore Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

All as per item No 60 above here in before but 20mm bore stop cock

S&F in repair 15mm bore Stop cock, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed.

S&F in repair 15mm bore bib tap PTMT any coloured with crutch or butterfly handle screwed down screwed to iron pipe complete.

S&F in replacement 15mm bore bib tap cost copper alloy CP fancy type long body with crutch or butterfly handle screwed down screwed to iron pipe complete.

S & F in repair in sink with drainage board made of stainless steel 1 mm thick with plug washer and waste incl fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm bowel size 410x 330x 160mm complete all as directed.

S&F in repairs 125mm CP shower rose fancy type with CP arm complete all as specified and directed.

S&F, Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long.complete all as specified and directed by Engr-in-Charge.

S&F, CP brass health faucet (hand shower ) incl flexible pipe of required length fixing to 15 mm dia pipe with brass check nut .complete all as specified and directed by Engr-in-Charge.

S&F, CP brass toilet paper holder with flap all as specified and directed.

Dismanteling CI /PVC/ SGSW / pipe any Dia fixed to wall and floor with any type joints

M&L 110mm bore PVC (SWR) pipe doubled socketed in any length with rubber ring joints fixed to walls & floor with clamp compl all as specified and directed

All as per item No 73 above but bore of pipe of 75 mm

S&F in 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement

M&L for 50mm thick cement concrete type C-1, 1:3:6 using 20mm graded aggregate as in plinth protection compl all as specified and directedetc

Dismanteling of stone slab and tiles of any description or any thickness in floors /aprons etc laid dry and pointed compl all as specified and directed

M&L for green marble (of any type) (table rubbed and polished) 13-15 mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite (Black) over and including 15mm thick rendering in CM 1:4.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in slabs beams shelves,chajjas roof landing etc incl demolition complete all as specified.

S&F Mild steel TMT bars 8mm to 10 mm dia and over cut to length bent to shape required including cranking bending and binding with wire (annealed) not less than 0.9mm or scouring with clips.

M&L for form work to soffits of suspended slab such as roof slab Floor slab, shelves and chajjas etc not cxc 200mm thick complete.

Form work to edges of concrete flats treads breaks in floors cills concretec railing opening in concrete walls floors and walls roofs n. exc 20 cm wide and sides of RCC /PCC bands in walls horizontal or sloping and similar work exc 5 cm but n.exc 10 cm wide

M & L for two coats of french polish on wooden surface of any description over in 10cm in width or girth not otherwised describeed incl preparation of surfaces with acoat of wood filler compl all as directed

S&F sink with drainage board made of steel stainless 1 mm thick with plugs washers and waste pipe copl incl bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to piupe over all min size 915mm x 460 mm bowl size 410x330x 160mm compl all as specified and directed

S & F in repair 20 mm bore harrison rails anodised alumunium alloy CP curtain rod with fixing brackets stop rollers etc

Dismantling boarding of any description fixed in any piosistion with nails

S&F of 18/19 mm veneered particle board solid core exterior grade with decorative face veneers one face with decorative fastener as in shef drower cupboard partition incl wooden leeping as reqd

S&F of 18/19 mm veneered particle board solid core exterior grade commercial type fixed with screws to timber frame work

S&F 100 mm Butt Hinges, medium weight, cold rolled mild steel and fixed all as specified and as directed

S & F 150 mm long hasp and stable safety type allumunium anodised with mild steel pin incln bolt hinge plate and fixed to screws

S & F 40 mm dia cup boards knob fixed with nut screw and washer of mild steel bright finished

Demolistion boarding of any description and in any posistion incl kitchen cabinet and similar work

M & L 18/19 mm thick veneered particle board exterior grade phinol bound sold core decorative type in kitchen cabinet shutter wall lining shelves drawers etc complete all as specified and directed

S &F continuous hinge mild steelbright finish width of flap 30mm compl all as specified and directed

S&F 75mm size brass handles cast type polished bright complete all as specified and directed

S&F magnet catch of approved qualities 75mm size complete all as specified and directed

M & L for moulding of 1 st class hard wood sectional area n exc 6 Sqm incl fixing with scrtews to wall pillar in brick or concrete surfaces in complete all as specified and directed

All as per item No 97 above area n.exc 6 sqcm and n.exc 13 sqcm complete all as specified and directed

S&F in stainless steel kitchen plate rack size 750 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete.

S&F in stainless steel kitchen plate rack size 900 x 600 x 300mm deep made out of 1mm thick sheet including fitting arrangement complete.

M&L for complete removal of all existing treatment including preparation of old surface and two coat oil bound distemper over a coat of 1 mm putty complete on old painted surface.

M&L for preparation of old plastered surfaces of ceiling and applying two coats of white wash over coat of primer on ceiling complete all as specified.

M&L for preparation of old plastered surfaces of wall and applying two coats of white wash over coat of primer on ceiling complete all as specified.

M &L for preparation of new plastered surfacesc and applying two coats of cement base paint over a coat of primer on walls complete all as specified

Supply only intigral water proffing compound complete all as specified and directed

Complete removal of existing treatment including preparation of surfaces of walls & applying two coats of cement base paint complete all as specified

M&L for Chequred cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floors with grey cement and no pigment over screed bed 15 mm thick in CM 1:6 complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor complete all as specified and directed

M&L Cement concrete (1:2:4) type B-0 using 20mm graded stone aggregate as in floor topping, 40mm thick, surfaces finished even and smooth without using extra cement complete all as specified.

S & F Stainless steel kitchen basket for cultery of size 70x17x20x4 of steel grade 304 with suitable frame work incl telescopic hinges suitable for as directed by Engr- in charge

S & F Stainless steel kitchen basket for cup and saucer of size 70x17x20x4 of steel grade 304 with suitable frame work incl telescopic hinges suitable for as directed by Engr- in charge

S & F Stainless steel kitchen basket plainer of size 17x20x4 of steel grade 304 with suitable frame work incl telescopic hinges suitable for as directed by Engr- in charge

S & F Stainless steel kitchen thali basket plainer of size 17x20x4 of steel grade 304 with suitable frame work incl telescopic hinges suitable for as directed by Engr- in charge

S & F Stainless steel kitchen pullout basket telescopic slide plain of size 17x20x4 of steel grade 304 with suitable frame work incl telescopic hinges suitable forbasket as directed by Engr- in charge

ELECTRICAL ITEMS Taking down old unserviceable COPPER/ALUMUNIUM point wiring from existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing complete all as specified and directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one 1-way switch complete with 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size not less than 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, in existing junction box including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly with thimble, including pressed steel powder coated MS sunken box of suitable size, covered with & including 3 mm thick bakelite, laminated hylem sheet top cover and making good surface as original by plastering and white / colour wash / distemper etc complete all as specified. Note: The cost of MS sunken box and bakelite sheet is included in the unit quoted rate.

All as per item No 116 above 5 pin 5 amps socket on indpendent board

All as per item No 116 above 5 pin 5 amps socket on same board

All as per Item No 116 here-in-before but with 2.5 Sq mm FR copper wire with 1.5 Sqmm for 3 pin 15 Amp socket outlet FR copper earth wire for power point on independent board. Note: Point wiring for power point will not be mixed with light /fan point circuit or not in the same conduit pipe

M & L for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Including taking down old unserviceable sub main wiring . NOTE : 2 single core 6 sqmm and one 6 sqmm,1 run of 2.5 sqmm and 1 run of PVC conduit shall be measured as one unit

M & L sub main wiring with 2 single core PVC insulated unsheathed stranded copper conductor cable FR of size 4 sqmm and one PVC insulated unsheated copper conductor cable FR of size 2.5 sqmm as earth wire fixed in and incl concealled non metalic PVC conduit of appropriate dia complete all as specified and directed

Supply and fixing of switch piano flush button single pole one-way 5 Ampere complete all as specified and directed

Supply and fixing of socket outlet 5 Ampere, 3 pins , flush type 250 volts AC complete all as specified and directed.

Supply and fixing of switch flush button single pole one-way 15 Ampere complete all as specified and directed.

Supply and fixing of socket outlet two-in-one, 3 pin Each suitable for 5 and 15 Amperes flush type, 250 volts AC complete all as specified and directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one 1-way switch complete with 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked, in and including PVC concealed conduit ISI marked of size 20 mm dia and 1.5 mm wall thickness and PVC conduit fittings such as tees, bends, elbow, reducers, in existing junction box including cutting, chasing, making good in CM 1:3 and 1.5 Sq mm (nominal area) FR, PVC insulated, un-sheathed and stranded copper conductor cable ISI marked as earth wire, connecting to common earth dolly and metal flush box , cover plate with frame of suitable size for fixing modular switches/sockets/fan regulators etc complete all as specified. Note : The cost of Metal box and cover plate are included in the unit quoted rate. However modular switch/sockets etc will be measured and paid saperetely.

All as per Srl Item No 126 above but for one socket outlet point 5 amps on the independent board.

All as per Srl Item No 126 above but for one socket outet point 5 amps on same board.

All as per Srl Item No 126 above but with 2.5 Sq mm FR copper wire with 2.5 Sqmm FRLS copper earth wire for power point on independent board.

Supply and Fixing Modular switch 6 Amp 1 way 1 module size SINGLE POLE one way all as complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular socket 2 module 6 Amp 2/3 pin way all as complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular switch 1 way 16 Amp 1 module all as complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular socket 6 A/16 A-2/3 Pin combined 2 module all as complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular white cover plate with frame 3 module all as specified and as directed by Engr-in-Charge.

Supply and Fixing Modular white cover plate with frame 4 module all as specified and as directed by Engr-in-Charge.

Supply and Fixing only Modular white cover plate with frame 6 module all as specified and as directed by Engr-in-Charge.

S&F MCB DB TPN 4 way,made out of CRCA sheet including fixing in walls cutting chases grouting and necessary patch work and white wash to match the existing of MCCB 4 POLE 100 Amp 16 KA breaking capacity with thermal release 01 nos and bus bar 200 amp rated made out of AL insulated with adhesive tape complete all as specified and as directed

M & L for sub main wiring with 1100 volt grade two single core FR Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. Including taking down old unserviceable sub main wiring . NOTE: 2 single core 6 sqmm and one single core 6 sqmm,1 run of 2.5 sqmm and 1 run of PVC conduit shall be measured as one unit

S & F on 2 PVC square blocks surface mounting universal battern housing made of powder coated CRCA sheet suitable for upto 1 x 20 W LED tube light rod single sided incl taking down old unserviceable fittings all as directed

S & F LED Tube light 20W ultra bright Polycarbonate tube light with high efficeancy suitable for fitting into new tubelight battern fittings all as directed

Taking down carefully ceiling fans complete with fittings at site, removing , depositing as directed and refixing after completiobn of work at site

S & F fan regulator electronic 5 step type socket size of 100 W rating and making all necessary connections complete all as specified and directed.

Supply and laying UG cable XLPE insulated screened PVC bedded galvanised steel strip or wire armouredelectric power cables 1100 volts grade with stranded allumunium conductor 50 sqmm 3.5 core

S & F lamp holder, PVC / polycarbonate type insulated body with back plate suitable for batten / angle fittings complete all as specified and directed.

M&L ceiling rose surface bakelite 65x 50mm three terminal

Supply and fixing of single phase call bell ‘DING DONG’, AC 230 volts single complete all as specified and directed.

S&F bell push, flush type, single pole 5 amps complete all as specified and directed.

M & L for earthing complete with galvanised earth plate electrode 600 X 600 X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4 mm dia by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2009, Part – I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, 50 mm thick RCC cover in PCC 1:2:4, type B-1, duly reinforced with 6 mm dia mild steel round bars @ 150 mm both ways center to center with suitable lifting handle to cover, earth pit of PCC 1:3:6 type C-1, GI protection pipe light grade 15 mm bore up to 7.5 m length from earth electrode & engraving of earth marking on nearby building with CM 1:4 plate size 200 X 150 X 15 mm & painting of earth result etc. including testing on complete all as specified and directed.

Supply and fix in replacement of security light fitting LED 45 Watt aluminum pressure dia cast housing with toughened glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with multistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal including taking down old CFL security light fitting all as specified and as directed

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 protection complete all as specified and directed.

S & F MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S & F MCB single pole,and neutral 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

S&F PVC body Exhaust fan 250 mm sweep complete with louvers 230 V all as specified and directed.

Supply and fix in replacement GI bracket made out of GI pipe light grade 32/40 mm dia and bend to shape 1.5m long MS clamp out of MS flate iron of size 40.4mm thick with nuts and bolts washers complete incl dismantling the existing GI pipe bracket and drilling of holes for nuts and bolts etc all as specified and as directed

M/s SODHI SALES CORPORATION

S S CONSTRUCTION

JOGRAJ CONSTRUCTION COMPANY

Harbhajan electric co