REPAIR/REPLACEMENT OF EXTERNAL ELECTRIFICATION WORK INCLUDING REPLACEMENT OF STREET LIGHT FITTINGS AT HASTINGS AREA AND BMC UNDER GE (CENTRAL) KOLKATA

Amount

Excavation in trenches not exc. 1.5 Metre wide and not exc. 1.50 Metre in depth for laying of cables/foundation of poles and getting out in soft /loose soil complete all as specified and directed.

Returning filling in including spreading levelling watering and well rammming in layers not exc 25cm complete all as specified and directed.

Removing excavated materiasl not exc 50 mtr and depositing where directed at a level n.exc 1.5mtr above the starting point complete all as specified and direced.

Supply and laying dry coarse sand as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 Cm (15 Cm under the cable & 8 Cm over the cable) and gently punned down to 18 Cm thickness complete all as specified and as directed. Note:- Thickness after punning down shall be measured for payment.

Supply and laying in trenches Bricks, sub class 'B' over burnt (kiln burnt) old size bricks, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed.

Laying only in trenches Old serviceable bricks obtained from taking out old unserviceable XLPE cable, laid flat dry with width of the bricks laid to the axis of the cable for protection of cable complete all as specified and as directed.

Taking out old U/S LT UG cable of any size and any description including GI pipe of any dia fixed with bldg and bricks for cable protection where ever appeared complete all as directed by Engineer-in-Charge. Note:- (i) Serviceable bricks obtained shall be stacked properly for re-use. (ii) Excavation and earth work shall be measured and paid separately.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 10 Sqmm 4.0 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 16 Sqmm 4.0 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 25 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 35 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 50 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 70 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 95 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 120 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 150 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 185 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 240 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

Supply and laying XLPE insulated PVC sheathed, armoured, aluminium conductor cable 1100 Volt grade 300 Sqmm 3.5 core in duct/floor/wall with provision of saddle and lugs, joints etc including connection complete all as specified and directed.

S&F Snap on aluminium trunking system with sections, covers, accessories and support for wiring accessories of size 50x145mm 2 compartments complete all as specified and directed.

M&L for Cutting roads / hard standing to a depth not less than 60 cm and not less than 45 cm wide for laying of GI pipe to draw the UG cable and making good the disturbed surfaces by filling of PCC (1:3:6) type C-2 using 40 mm graded stone aggregate and finished the surface even and smooth with out using extra cement and disposed off the surplus debris and soil to a distance not exc 50 m complete all as specified and as directed.

M&L for 40mm bore GI tubes light grade for cable protection supporting to poles with all fixing accessoires (clamps, nut, bolt and washer etc) complete all as specified and directed.

All as per item no 22.00 but 50 mm dia

All as per item no 22.00 but 80 mm dia

All as per item no 22.00 but 100 mm dia

S&F Thermoplastic, polycarbonate cable terminal boxes, outdoor type of size 155mm x210mm x92mm alongwith MCB SP 6 to 32 Amps and fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

S&F Thermoplastic, polycarbonate cable terminal boxes, outdoor type of size 93mm x93mm x62mm fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

S&F Thermoplastic, polycarbonate cable terminal boxes, outdoor type of size 182x180x111mm fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

S&F Thermoplastic, polycarbonate cable terminal boxes, outdoor type of size 250x200x105mm fixed to pole with MS clamp made out of MS flat of section 25x 3mm including all necessary fittings and connection including taking down old unserviceable one complete all as directed by Enginner-in-Charge.

Supply and fix Straight through XLPE cable jointing kit 1100V ( Earthed) grade for indoor termination heat shrinkable type complete with jointing materials and accessories suitable for XLPE armoured aluminium conductor cable of size 10 Sqmm to 50 Sqmm 4.0 core complete all as specified and as directed.

Supply and fix Straight through XLPE cable jointing kit 1100V ( Earthed) grade for indoor termination heat shrinkable type complete with jointing materials and accessories suitable for XLPE armoured aluminium conductor cable of size 70 Sqmm to 95 Sqmm 3.5 core complete all as specified and as directed.

Supply and fix Straight through XLPE cable jointing kit 1100V ( Earthed) grade for indoor termination heat shrinkable type complete with jointing materials and accessories suitable for XLPE armoured aluminium conductor cable of size 120 Sqmm to 300 Sqmm 3.5 core complete all as specified and as directed.

S&F Changeover switch in sheet steel encloser four pole 315 Amps ,Manual type 415Vwith necessary cable lugs including taking down old burnt/unserviceable one after opening all electrical connection complete all as speceified and directed.

S&F Changeover switch in sheet steel encloser four pole 400 Amps ,Manual type 415Vwith necessary cable lugs including taking down old burnt/unserviceable one after opening all electrical connection complete all as speceified and directed.

S&F ACB 800 Amps, four pole 415 V with thermal and magnetic release manual fixed type including making all necessary connection including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 400 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 250 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 200 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 160 Amps, 36kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 100 Amps, 25kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F MCCB, 32 Amps, 25kA, four pole 415 V with thermal and magnetic release adjustable type including making all necessary connection,cutting welding of existing panel board as per site requirment and painting the disturb part of panel as per the existing colour including taking down old unserviceable one complete all as specified and as directed.

S&F LED decorative post top lanterns 35/40 W for energy efficient conservation upto 50% and with eco friendly lighting system with all accessories and necessary connction including taking down old unserviceable post top lantern of any capacity complete all as specified and as directed. Make : Bajaj BRIL 45W LED NW / Crompton Greaves Cat No. MAPLE LPTO-40/CDL-M/Surya Cat Part No :- SLEPT 40W-ETPP or equivalent

S&F LED IP65 rated inverted pyramid tripod type,LED Bollard 10/8 Watt capacity with soft 360 degree light distribution with all accessories and necessary connction including taking down old unserviceable of any capacity complete all as specified and as directed. Make : CG cat part No. LBLSN-10-CDL / Havell's Cat part no-CONENXGBLS8WLED857PSYMTOPCM /Surya Cat Part No-SLE BL 9W-BLK800 or equivalent

S&F LED bollard light tulip shaped 9/10 watt capacity with opal acrylic IP 65 protection with necessary connection including taking down old unserviceable one complete all as specified and as directed. Make:- Bajaj. - Cat part No- BGBOS 605 9W LED WW or equivalent .

S&F LED 12 watt with IP 67 rating waterproof fountain light compact and robust design with aluminium housing, waterproof connectors with colour white/RGB/mono RGB with necessary connection including taking down old unserviceable one complete all as specified and as directed. Make- Philips Cat no.BBP342LED1200 or equivalent

S&F Pressure die cast powder coated housing with PC diffuser efficient high output LED bollard cylindrical shaped 9/10 watt capacity IP 66 protection including necessary connection and fixing arrangement after taking down old unserviceable one complete all as specified and as directed. Make : CG model No. LBLA1-10-CDL or euivalent

S&F LED street light luminaries 35 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal mangement in multiple optics with IP 65/66 protection including taking down old unserviceable one complete all as specified and as directed. Make : Magik cat no. SPSPO36C/ Philips Cat No-BRPO46LED36CWMRSLPSU6R/ Surya model no: SLE UL 36WIP66LXN or equivalent.

S&F LED street light luminaries 60 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal mangement in multiple optics with IP 65/66 protection including taking down old unserviceable one complete all as specified and as directed. Make : Magik cat no. SPSPO60C/ Philips Cat No-BRPO56LED59CWSLFPSUSL/ Surya model no: SLE UL 60WIP66LXN or equivalent.

S&F LED street light luminaries 90 watt 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrosion resistant including thermal mangement in multiple optics with IP 65/66 protection including taking down old unserviceable one complete all as specified and as directed. Make : Magik cat no. SPS090C / Surya model no: SLE UL90W IP66(LXN) or equivalent

Supply and fix PVC insulated, stranded copper electric cable, 2.5 Sqmm 2 core drawn into the steel tubular pole by drilling holes above the junction box and another holes near street light bracket including taking out old unserviceable copper wire complete all as specified and as directed.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI strip 32x6 as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed.

M&L Preparation of old painted surface of existing steel tubular swaged pole 9 mtr long, cross arms, clamps, GI street light bracket etc and applying two coats of aluminium paint including writing pole number & bottom of pole painted with black paint with yellow strip around between the junction of aluminium paint and black paint complete all as specified and directed.

M&L for repair of LT panels/LT feeder piller boxes by carrying out checking thoroughly all electrical connections, lugs busbar, voltmeter, ammeter ,cable glands ,insulator on busbar, and tightening all connections properly with proper size of new nut, bolt, washer as per the site requirements and insulation of busbar with colour code insulation tapes including welding on damage panel and preparation of surfaces internal and external of panels/feeder piller boxes by cleaning with dry cloth /removal dust particles by using air blower and scratching the old painted surfaces as directed and painting with two coats of synthetic enamel paint over a coat of red oxide primer and rewriting existing letters /numbers as directed and repair the existing PCC basement of the feeder piller box/ LT panel as per site requirement or directed including applying one coat of cement base point after preparation of surfaces and testing complete as per direction of Engineer- in- charge. Note:- Cost of PCC, Painting, Nut, bolt, washer etc. are deemed to be included in quoted rates.

Supply, installation, testing and commissioning of feeder pillar box CPRI approved of size 1.5m x 1.2m x 0.60m, outdoor type, totally enclosed, dust and vermin proof, factory made, confirming to IP-54, double door both front and back side, with locking arrangement, prewired, made out of 3mm thick CRCA sheet with 04 Nos legs, MS angle of size 40x40x6mm of size 0.60m long suitably grouted with PCC type C2 ( 1:3:6, using 40mm graded crushed stone aggregates) and 15mm thick cement plaster in CM 1:4 over concrete surfaces including two coats of synthetic enamel paint of approved colour over a coat of red oxide primer on stell surfaces both internally and externally with aluminium bus bar 400 Amps rated duly colour coated 04 Nos and connection through aluminium busbar of appropriate size to MCCBs and MCBs and power contactor and accessories fitted in it for incoming and outgoing cable, including LED multi function meter and necessary cable, lugs and glands with following accessories including taking down old unservicaeble feeder pillar box complete all as directed by Engineer-in-Charge. (a) MCCB, 400Amps, 4 Pole, 415 Volts, 36 kA with thermal and magnetic release. -01 No ( Incoming). (b) MCCB, 100Amps, 4 Pole, 415 Volts, 16 kA with thermal and magnetic release. -02 No ( outgoing). (c) MCCB, 160Amps, 4 Pole, 415 Volts, 36 kA with thermal and magnetic release. -02 No (d) MCCB, 200Amps, 4 Pole, 415 Volts, 36 kA with thermal and magnetic release. -02 No (c) Change over switch 400A, 415 Volts, -02 Nos. (d) LED Multifunction meter with CT of required capacity . -01 No. (e) LED Phase indicating lamp RYB- 1 SET Note:- Drawing shall be submitted from manufacturer and same shall be got approved by Accepting officer.

Taking up unserviceabel LT steel tubular pole of any size including demolition of PCC foundation and coping of any description transporting to store complete all as specified and directed by Engineer-in-Charge.

M&L Steel tubular sewaged pole 9 mtr long completed with MS base plate, finial taper plug nut bolts, screws as specified type 410 SP-31 as per relevant IS specifiecation including two coats of aluminimum paint over a coat of red oxide primer complete all as specified and directed. Note : Earth work/excavation PCC shall be measured and paid separately under relvent item.

M&L Plain cement concrete (1:4:8) type D-2, using 40mm graded aggregate as in pole foundation/foundation of feeder pillar including demolition of old PCC/broken PCC complete all as specified and as directed.

M&L Plain cement concrete (1:3:6) type-C-2 using 40mm graded aggregate as in coping of pole including demolition of old PCC/broken PCC complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping of pole/struts and other similar location etc with and including all necessary form work including demolition of old PCC/broken PCC.complete all as specified & directed

M&L Rendering 15mm thick in Cement Mortar 1:4 on other than fair faces of Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and Smooth without using Extra Cement complete all as specified and as directed.

M&L Preparing new Surfaces of Walls and applying Two Coats of Cement Based Paint over a coat of primer complete all as specified and as directed.

M&L Danger notice plate of 1.6mm thick for HT 20x15cm mild steel sheet, vitreous enameled white with letters, figures and conventional skull and bones in signal red colour and fixed with MS clamps, bolts and nuts incl taking down old unserviceable one complete all as specified and as directed.

S&F Analog Timer switch 240V AC 50Hz Current rating 16A/250V AC Resistive type QT(daily) after taking down old unserviceable one complete all as specified and directed.

M/S J S ENTERPRISES

K.P Construction Co