Providing, installation, testing and commissioning of electro-mechanical machinery alongwith allied works at WSS Tajoor

Amount

Providing, installation, testing and commissioning of 3000 GPH x 180 meter head HC pump set with suitable rating prime mover in compliance with the technical conditions and allied works by way of surveying of site, designing of pump machinery and prime mover in conformity with site conditions. Laying of M-20 grade RCC foundation block for each pump of size 6’x3’x4’ by using reinforcement steel of 10mm dia. The foundation block as per size of pump set should have additional margin of 6” on all sides. The foundation block may be combined for all the pumps which must includes space on all sides of pump set and space between the pump sets. Providing, fabrication and laying of 80mm dia MS suction pipe line to the pump set of length as per site conditions including 80mm dia MS bends, MS flanges, expanders/reducers / dismantling joints / saddles/ pipe extension pieces, manifold, 80mm dia Cast Iron sluice valve-1no. and / or foot valve-1no., gaskets, nuts, bolts, washers as per site requirement. Providing, fabrication and laying of 65mm dia MS delivery pipe as per site conditions including MS bends, MS flange, expanders/reducers / dismantling joints/ saddles/ pipe extension pieces, Cast steel Sluice valve 65mm dia and NRV 65mm alongwith by pass arrangement (class 300 accompanied with manufacturer’s in house test certificate)gaskets, nuts, bolts, washers,100mm dia manifold as per requirement and making connection with the rising main. Job includes greasing work, P/F of graphited gland packing and thereafter testing on no load and then on full load and commissioning thereof. Job includes providing, laying and fixing of insulation rubber mats on the floor of the pump house. Job includes providing of maintenance tool kit, over head girder alongwith chain pulley 3 ton-1no., folding bed-1no., chairs-4nos., fan-1no., and steel almirah-1no. Job includes providing / fitting and laying of copper cable 25mm2 from motor to panel in six leads approximately 36 meters for each motor, then p/f and laying 50mm2 copper cable from panel upto MCCB and further upto voltage stabilizer in four leads approximately 30 meters in length conforming to ISI standards complete with proper thimbling and insulation material. Job covers providing and fitting of 200 ampere MCCB of 50KA breaking strength. Proper earthing of the equipment should be done for safety of machinery. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc

Providing, carriage, installation, testing and commissioning of 3 phase, 63 KVA voltage stabilizer copper wound, first quality CRGO silicon steel core, naturally- oil cooled, manually operated, 14 gauge container chamber alongwith allied works at WSS Tajoor. Job includes providing of 63 KVA voltage stabilizer complete with mineral insulating oil, MCCB, change over switch complete with safety and protection devices etc. Job includes providing and fitting of single core armoured Al. cable of 70mm2 from electric pole to main switch in four leads approximately 50 meters length of each lead and then providing and fitting of 35mm2 copper cable from main switch to voltage stabilizer in four leads approximately 20 meters in length complete with insulation and thimbling as per site requirement .The voltage stabilizer should have 5 upwards steps and 2 downwards steps (or as per the design /specified voltage range) from the line voltage i.e. it should work from 180V to 400+5%. Proper earthing of the equipment shall be done. Job includes cost of machinery, equipments and material, transportation charges, manual carriage charges, labour charges, loading /unloading charges, hire charges of tools, tackles, and material handing equipments etc

GANPATI ELECTRICAL AND MECHANICAL WORKS

N B Engineering and Electric Works