GE(P)CH/CHM-04/2021-22

Amount

Dismantling floor, hearth and wall tiling including cement mortar bedding (but excluding backing), removing unserviceable tiles from outside of CH (WC) Chm complete all as directed.

Coloured Non-skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n. exc 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layers in CM (1:6) etc complete all as specified and directed.

All as per item No-02 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM (1:4) etc complete all as specified and as directed.

Coloured Vitrified ceramic tiles double charged 10mm thick (square/rectangular) as per sample kept in Engr-in-Charge sample room, area of each tile n. exc 0.36 sqm, in floors etc. with and including 15mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed (Make : Kajaria or equivalent)

All as per item No-04 above but on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in CM (1:4) etc complete all as specified and as directed.

Glazed ceramic coloured tiles of size 300mmx450mmx7mm thick, set and jointed in neat cement slurry and pointed in coloured cement as in vertical surfaces such as skirting, dados and risers to steps etc to match including 10 mm thick screed bed or bedding layers in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thick ness in floors aprons etc laid beded and pointed in any mortar

Granite (of any type) work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, window cills, cooking platforms, vertical surfaces and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as directed.

Baroda green marble work 16 to 18mm thick (table rubbed and polished) in flooring, steps, jambs, pillars, windowcills, cooking platforms, vertical surfaces and like with and including 15mm thick bedding in CM 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match the colour of tiles etc complete all as directed.

Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed.

Machine cut kota stone slab flooring (pre-polished) 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20 mm thick screed bed in CM (1:6) complete all as specified and directed.

All as per item No-11 above but in skirting/dado including 10 mm thick screed bed in CM (1:4) complete all as specified and directed.

Taking down chowkhats or frames n. exc 1.5 sqm each (without taking off shutters from the frames) including cutting out holes for taking out holdfasts and filling the same with PCC 1:2:4 (12.5 mm graded aggregate) , forming jamb if required and plastering jamb cill soffits with CM 1:4 full thickness of wall and side of walls if broken upto 300mm each side during dismantling and making good surfaces with preparation and painting the surfaces with two coats of matching colour on outer and inner surface of wall complete all as specified and directed. Note : Rate also includes labour and material cost of PCC and bricks if required to make good the surface jambs , plastering and painting with matching shade upto complete satisfaction of Engineer-in-Charge

All as per item No-13 above but exc. 1.5 Sqm and n. exc 4 Sqm each

Taking down shutter of any description exc 1 sqm but nexc 2 sqm each all as directed.

Taking down shutter of any description exc 2 sqm each all as directed.

Resecuring or easing of door/windows/cupboard shutters of any size for easy closing/opening including tightening of hinges or changing the position of hinges & adjustments of lower bolts, sliding bolts etc complete all as directed.

35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (with out shash bar), edges of framing with plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

Panelled shutter (Factory made) 35mm thick of second class hard wood (hollock), edges of framing plain chamfered or rounded, fitted with cut & mitre

Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and directed.

Factory made solid PVC moulded door shutters with particle board core 28 to 30 mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick single piece extruded PVC profile on the front face & 2mm plain coloured single piece extruded PVC profile on back face etc complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long,extruded section complete all as specified and as directed.

Aluminium barrel tower bolt, 150 mm long,extruded section fixed in repair complete all as specified and as directed.

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed

Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete fixed in repair all as specified and directed

Cold rolled mild steel butt hinges 100 mm long medium weight complete all as specified and directed.

Steel helical door spring 300mm ordinary rat rail rod pattern springs including roller plate complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete all as specified and as directed.

150mm long extruded aluminium alloy handle, fabricated type, anodised etc complete fixed in repairs all as specified and as directed.

Mortice lock brass 4 levers, vertical type 100 mm complete fixed in repairs all as specified and as directed.

150mm size aluminium anodised hasp and staple with mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as directed.

Powder coated aluminium alloy curtain rails 20mm dia fixed to required lenghts etc fixed in repairs complete all as directed.

Brass chromium plated curtain rails brackets fancy type for 20mm dia curtain rod etc fixed in repair complete all as directed.

Floor door stopper of aluminium alloy body and tongue anodised, with hard drawn steel spring fixed in floor overall length of cover plate 150mm etc fixed in repairs complete all as directed.

Aluminum (extruded section body) door closer hydraulically regulated, universal type suitable for door 61 to 80 Kg of approved make fixed in repairs complete all as directed.

Stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples complete all as specified and directed.

Stain less steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or aluminum wire staples but fixed in repairs complete all as specified and directed.

Powder coated aluminium frames (Thickness of powder coating not less than 50 micron) for doors , windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified (Thickness of section not less than 3.00MM)

Powder coated aluminium door shutters made out of hollow extruded aluminium sections as mentioned below with and including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges(03 nos per each leaf), tower bolts, anodised aluminium snap beading, screws to hold glass/ prelaminated particle board etc complete all as specified & directed comprising the following :- (a) Top rail :100mm x 44-45mm, 2.00mm thick (b) Middle & Bottom rail - 150mm x 44-45, 2.00mm thick (c) Vertical styles :83-84mm x 44-45mm, 2.00mm thick

Powder coated aluminium window and ventilator shutter made out of hollow extruded aluminium sections as mentioned below with and including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws/U section to hold glass & wiremesh, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.), Hinges 02 nos complete all as specified & directed comprising the following :- (a) All rails stiles shall be 83-84mm x 44-45, 2.00mm thick

Aluminium grill powder coated with and including suitable aluminium anodised frame F/H section as required etc complete all as specified and directed.

0.56mm thick plain aluminium sheeting as in ridges, hips, valley gutter, drip and straight flashing etc fixed in repairs complete all as specified and directed.

Dismantling of wooden boarding of any description and fixed in any position with screws etc complete all as directed.

17/18mm thick pre laminated PVC Solid board, pre laminated both side with white lamination as in cupboard side box,cupboard shutters, shelves and drawers fixed with screws and adhesive (Each Individual part will be measured seprately) complete all as specified and directed.

9mm thick pre-laminated particle board, interior grade, pre-laminated both side with decorative choice lamination, ISI marked ( IS: 12853) fixed as panels in aluminium joinery etc in repair complete all as specified and directed.

Hacking out old broken glass of any thickness, size quality or description from wooden/metal frames glazed with putty or fixed with bead/clips complete all as directed.

3mm thick tinted glass, ordinary quality and glazing with oil putty in square n.exc 0.50sqm in each pane complete all as specified and directed.

All as per item No-47 above but exc 0.50 sqm in each pane.

All as per item No-47 above but 4mm thick frosted glass

All as per item NO-47 above but 5.5mm thick glass.

Preparation of new wood surface of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of old wood surface of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as directed.

Brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls finished even and smooth without using extra cement etc complete all as directed.

Rendering 5 mm thick in CM (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed

Preparation of newly plastered surfaces of walls and applying one coat of alkali resistant primer over a coat of birla white cement putty, sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint etc complete all as specified and directed.

Preparation of newly plastered surface of ceiling and applying three coats of white wash etc complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying one coats of white wash complete all as specified and directed.

Preparation of old plastered surfaces of ceiling and applying two coats of oil emulsion distemper etc complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying one coats of white wash complete all as specified and directed.

Preparation of old plastered surfaces of wall and applying one coat of oil emulsion distemper etc complete all as specified and directed.

Complete removal of old treated surfaces on walls and applying one coat of alkali resistant primer and a coat of Birla white cement putty ,sanding the surfaces till smooth finish is obtained and finally applying two coats of oil emulsion distemper etc complete all as directed.

Preparation of old plastered surfaces of wall and applying one coat of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/lit, of approved manufacturer, of required shade and color complete.

Preparation of old steel/wooden surface and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs of any thickness including cover fillets complete all as directed.

False ceiling of perforated particle designer boards of size 595x595x12mm thick(make : Armstrong or Equivalent) fixed on GI grid (specification as per precoated GI everest grid of tee 2430)(Sample as kept in sample room of Engr-in-Charge), framed and suspended with 4mm dia GI wire incl clips etc (upto 1200mm ht from ceiling) in patterns as approved by GE, in Grid of size 605mm x 605mm fixed in ceiling with necessary fitting and fixtures as per approved manufacturers instructions, etc complete all as specified and directed.

Providing and fixing Gypsum board ceiling with tiles of size 595mm x 595mmx12mm thick having PVC paper on front side and metalised polyster layer on the back side suitable placed in existing false ceiling grid made of aluminium /GI/MS as per manufacturers instruction etc complete all as specified and directed.

25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed.

Welding in repairs exc 2.5cm but n. exc 5 cm in length & n. exc. 6mm thickness of metal to be welded complete all as directed.

Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc complete all as directed.

Cutting chases, pinning in, making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintel etc and cutting chases for concealed water tubing or concealed conduit wiring etc n. exc. 10 cm width or girth complete all as directed

GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors including taking down GI tubing with all fittings etc complete all as directed.

Bib taps 15mm dia cast copper alloy chromium plated, fancy type with crutch or butter fly handles screwed down for iron pipe or for brass ferrule fixed in repairs complete all as directed.

Elbow operated bib taps for surgeons 15mm dia cast copper alloy chromium plated, fancy type screwed down for iron pipe or for brass ferrule etc fixed in repairs complete all as specified and directed.

15mm size fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc fixed in repairs complete all as directed.

15mm bore brass CP fancy Type center hole basin mixer for mixing hot & cold water screwed down for iron fixed etc fixed in repairs complete all as specified and directed.

Angular stop valves 15 mm dia cast copper alloy, chromium plated, fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions fixed in repairs complete all as specified and directed.

Stop valves 15 mm dia cast copper alloy, chromium plated, fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions fixed in repairs complete all as specified and directed.

20mm bore dia Ball brass valves, high pressure, with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed etc fixed in repairs complete all as directed.

Bib tap 15mm PTMT, fancy type any colour high pressure screwed for iron pipe and fixed etc fixed in repairs complete all as directed.

CP brass bottle trap 32 mm dia including joining to waste fitting and waste pipe fixed in repairs complete all as directed ( Make : PARCO/GMG)

Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm including waste pipe of polythelene of low or high density or PVC 32mm dia & waste fitting brass chromium plated (Coupling) for 32mm bore with long screwed shanks and fly nuts including making holes in stone walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0 fixed in repairs complete etc complete all as directed.

Brass chromium plated shower rose 125mm size (ABS body face plate with single flow including shower arm with wall flange 15mm bore) etc fixed in repairs complete all as specified and directed.

CP Toilet paper holder, fixed to walls with CP brass screws etc fixed in repairs complete all as directed.

Viterous china squatting pan Orissa pattern size 580 x 440mm white with 'P' or 'S' trap, front or back inlet, integral foot rest (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and connections to flushing cistern/pipe and making good disturbed portion to match existing surface etc fixed in repairs complete all as directed.

Vitreous china wash down water closet pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device fixed in repairs complete all as specified and directed.

Plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device etc fixed in repairs complete all as specified and directed.

Vitreous china wash basin white flat back size 550 mm x 400mm including all fittings including cutting for and pinning in ends of brackets or erecting stand etc fixed in repairs complete (waste coupling 32mm bore CP, 32mm bore PVC waste pipe, cast iron brackets etc shall be deemed to be included in the quoted rate)

Fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc fixed in repairs complete all as directed.

Glass shelf assembly consisting of 5.5mm thick sheet glass shelf of size 600x120mm with brass chromiun plated fancy brackets and railing fixed with screws and wooden/plastic cleats etc fixed in repairs complete all as directed.

PVC low level flushing cistern, white, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe fixed in repairs all as specified and directed.

PVC syphone system with handle complete for low level flushing cistern fixed in repairs all as directed (Make : Super flush or equivalent)

110 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floor/fixed to walls etc fixed in repairs complete all as specified and directed

All as per item No-99 above but 75mm dia PVC (SWR) pipes

110 mm dia PVC (SWR) bends of any radius complete all as specified and directed

75 mm dia PVC (SWR) bends of any radius complete all as specified and directed

Grating CP 110 mm dia etc fixed in repairs complete all as specified and as directed.

15 mm dia 450/600 mm long PVC connection pipe with 02 Nos nut at each ends with rubber washer etc fixed in repairs complete all as specified and directed.

Fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc fixed in repairs complete all as directed.

75mm dia cast iron nahani trap/floor trap, with stainless steel grating including grating jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including taking out old floor trap

Brass chromium plated fancy type health faucet or aeroplane jet with 900mm long stainless steel knitted hose pipe for faucet/sensor mixer etc fixed in repairs complete all as directed.

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and unsheathed cable as earth continuity conductor to common earth and connected to earth dolly fixed in repairs complete all as specified for the following :-

(a) One light point controlled by one switch/one fan point controlled by one switch & fan regulator.

(b) One socket outlet three pin, 5 Amps on the same board.

(c) One socket outlet three pin, 5 Amps, independent.

(d) One light point controlled by one bell push.

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 4 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC concealed conduit with fittings ISI marked, terminated in junction box incl 4 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neutral), with stranded copper conductor 1.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing and caping with fittings ISI marked, terminated in junction box incl 1.5 Sqmm (Nominal area) single core, multistranded, FRLS, PVC insulated and sheathed cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified Make of cable : Plaza/Finolex/Havells

Point wiring using approved colour coding as per IS (For phase and neural), with stranded copper conductor 2.5 Sqmm (nominal area), single core, multistranded, FRLS, PVC insulated and unsheathed cabel 1100 volts grade, ISI 694 marked drawn in and including heavy duty PVC casing and caping with fittings ISI marked, terminated in junction box incl 2.5 Sqmm (Nominal area) single core cable as earth continuity conductor to common earth and connected to earth dolly complete for one power point 15 Amps all as specified. Make of cable : Plaza/Finolex/Havells

Modular metal flush terminal boxes with lumina plate and frame suitable for 1 module complete all as specified and directed. Make : . Make :SSK/Legrand/Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 2 module complete all as specified and directed. Make : . Make :SSK/Legrand/Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 3 module complete all as specified and directed. Make : . Make :SSK/Legrand/Anchor

Modular metal flush terminal boxes with lumina plate and frame suitable for 4-5 module complete all as specified and directed. Make : Make :SSK/Legrand/Anchor.

Modular metal flush terminal boxes with lumina plate and frame suitable for 6 module complete all as specified and directed. Make :SSK/Legrand/Anchor.

Modular metal flush terminal boxes with lumina plate and frame suitable for 8 module complete all as specified and directed. Make :SSK/Legrand/Anchor

Switch modular type single pole one module, 6 Amps complete all as speciifed.Make :SSK/Legrand/Anchor

Switch modular type single pole one module, 16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Socket outlet mdoular type, multipurpose, 2/3 pin, single pole two module, 6/16 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Modular bell push single pole one module, 6 Amps complete all as speciifed. Make :SSK/Legrand/Anchor

Modular blank plate one module.

Modular fan step regulator 120 watts for 48"/56" sweep ceiling fan 2 module complete all as specified. Make :Anchor

Ceiling rose 3 pin, 230 volts PVC polycarbonate insulated body complete all as specified. Make : SSK/CONA/ANCHOR.

Bell ding dong AC 230 volts PVC polycarbonate insulated body complete all as specified. Make : CONA/ANCHOR/LEGRAND.

LED battern made out of CRCA MS sheet/ alumunium, 4 feet long ,box with miniumu depth of 25mm with front openable cover both side connection arrangement suitable for rertrofit led tube fixed in repair complete all as specified and directed.Make : Halonix/Crompton/Anchor Panasonic/ Havells

LED tube light 18/20 watt minimum lumens 1980 of 4 feet size with adjsutable holder with back spring with aluminium housing heat shrink both end connection fixed in repair. Make : Halonix/Crompton/Anchor Panasonic

Deep type recess mounted LED 36 watt Luminaire equiped with CRCA powder coating housing , antiglare diffuser with separate energy electronic driver of capacity 36 Watt minimum, 5700 K , 595mmX595mmX75mm dimensions, including fixing arrangement with existing fixed in repair complete all as specified and directed. Make : Pansonic/Halonix/C&S

Indoor decorative LED battern with milky diffuser including 8 - 10 Watt 5700K LED strip including driver ,accessories to fix the same with existing wall and all connected accessories as per manufacturers recommendation fixed in repair complete all as specified and directed .Make : C&S/ Halonix/Panasonic/ havells

Surface/recess mounted slim squre type led panel with die cast aluminium housing and smooth power coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 10 watt LED panel light,3000k,having dimension 120mmX120mmX35mm and making connection accessories fixed in repair complete all as specified and directed. Make : C&S/ Halonix/Panasonic/ havells

LED Luminaire 42 Watt, 6500 K suitable for armstorng/grid cealling/surface mounting, with its super bright LED, 2X2 GRID CEILING,including 42 watt LED strip recess mounted complete with drivers and others accessories as per manufactures recommendation complete including fixing arrengement with existing including taking down existing complete all as specified and directed. Make : Hallonix/ Panasonic/ C&S

Decorative wall mounted Bed side light including 5 watt LED bulb/strip Lamp of size: 13.4 cm x 12.4 cm x 8.2 cm Lamp Material: Metal, Synthetic, Color: White including taking down existing complete all as specified Make : Philips/ Wipro/Hallonix/ Crompton/Bajaj /Anchor Panasonic/HPL

Surface/ recess mounted circular LED down lighter with die cast aluminium housing and smooth power coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 15 Watt LED down light,6000k, and making connection accessories fixed in repair complete all as specified and directed.Make : Panasonic/Halonix/C&S/ Havells

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. all as specified.

Sub main wiring in replacement (with approved colour coding as per IS) with single core FRLS PVC insulated multistranded copper conductor cable 1.1 KV grade (main cable two runs of main cable) alongwith one run of single core FRLS PVC insulated flexible stranded copper Conductor 1.1 KV grade of earth for earthing drawn in suitable PVC conduit/ concealed conduits with following size

(A)2 run of 6 Sqmm cable + 1 run of 6Sqmm

(B) 2 runs of 10 Sqmm cable +1 run of 10 Sqmm earth wire

(c) 2 run of 4 Sqmm cable + 1 run of 4Sqmm

Notes: (i) Conduit & conduit accessories shall be measured & paid for separately.

(ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE" MAKE OF CABLE: FINOLEX/RPG/PLAZA./Havells

Sub main wiring (with apporover colour coading as Per IS) with single core FRLS PVC insulated multistandred copper conductor cable 1.1 KV grade (main cable 4 runs of main cable ) along with two runs of FRLS PVC insulated flexible standred copper conductor 1.1 KV grade of earthing drawn in existing surface/recessed steel/PVC conduit/concealed complete all as specified and directed for the following.MAKE OF CABLE: Plaza/Finolex/ Havells

(a) 4 x 16 Sqmm + 2 x 16.0 Sq mm earth wire

Notes: (i) Conduit & conduit accessories shall be measured & paid for separately.

(ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE" MAKE OF CABLE: Havells/PLAZA/Finolex.

25mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

40mm dia, rigid non metallic PVC concealed conduit, 'ISI marked', inclusive of all fittings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing accessories such as couplers lock nuts, saddless, pipe hooks etc for wiring, complete all as specified.

Cutting chases in existing wall for laying of PVC conduits including making good disturbed surfaces including painting of wall matching with exisiting colour after concealing the conduit in wall all as specified.

Taking down carefully opper/aluminium sub main wiring complete, including existing batten/conduit etc. removing materials deposited in store for keeping in safe custody and making good disturbed surfaces of walls, floors etc. complete all as specified.

MCB SPN, 'C' series. 10 KA, 240 Volts 40 Amps capacity. Make : Legrand/ C&S/Siemens.

MCB SP, 'C' series. 10 KA, 240 Volts, 40 Amps capacity. Make : Legrand/C&S/ Siemens.

MCB SP, 'C' series. 10 KA, 240 Volts, 6-32 Amps capacity. Make : Legrand/C&S/ Siemens.

MCB TPN , 'C' series. 10 KA, 240 Volts, 63 Amps capacity. Make : Legrand/C&S/ Siemens.

Flush type single pole, one way 5 Amps 240 volts all as specified.

Socket outlet 2-in-1,3 pin, 5 Amps flush type.

Flush type single pole, one way 15 Amps 240 volts all as specified.

Socket outlet 2-in-1, 3 pin, 5 and 15 Amps flush type all as specified.

Multipurpose 16 Amps combination PVC Gang box of size 7" x 4" including one switch and socket of 16 Amps complete all as specified and directed. Make : /Anchor/SSK/ABB

Multipurpose 6 Amps combination PVC Gang box of suitable size including one switch and socket of 6 Amps complete all as specified and directed. Make : Kingel/Anchor/SSK/ABB

Caping casing 20/40/25 mm as per requirement of sight any ISI marked

Electronic driver of 36 watt,2.5 KV search protection as per existing in site suitable of LED Ceilling light 2X2 ,1X 4 ft , input suppply 140V -270V and output 12 Volt DC. Make : Crompton/Hallonix/Panasonic

Sheet metal enclosure Two way , two module ,IP30 degree portection enclosure for 32 Amp MCB DP complete all as specified and directed. Make : Hager/Legrand/ Hensel/ABB

Plug and socket outlet (with industrial plug and socket ) with provision to mount MCBs 20 A including 20A SP MCB , C series , 1 module , IP 30 degree protection complete all as specified and directed . Make : Hager/Legrand/ Hensel/ABB

VTPN DB 4-ways, IP 43 - IK 09 with metal door (DPX3 160+12) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall including taking down all as specified. Make : Legrand / Siemen/Hager/C&S/ABB

TPN DB , 4 Way (4+12 modules) double door , IP43 degree protection complete all as specified and directed. Make : Hager/ Legrand/ C&S/ ABB

VTPN DB 12-ways, IP 43 - IK 09 with metal door (DPX3 160+36) suitable for surface/flush mounting as per site requirement with copper bus bar, with neutral bar, earth bar and cable ties for cable arrangement, fully insulated bus bar and neutral bar, door earthing, corner shield for better protection, pan assembly confirming to IS 8623 including making fixing arrangement with existing wall including taking down all as specified. Make : Legrand / Siemen/Hager/C&S/ABB

MCCB 160 Amps 3 pole 415 volts 36 kA Ics=75% Icu including extended terminals all as specified and directed.Make: Legrand / Siemen/Hager/C&S/ABB

MCCB 100 Amps 3 pole 415 volts 16 kA Ics=75% Icu including extended terminals all as specified and directed.Make: Legrand / Siemen/Hager/C&S/ABB

MCCB 63 Amps 3 pole 415 volts 25kA Ics=75% Icu including extended terminals all as specified and directed.Make: Legrand / Siemen/Hager/C&S/ABB

MCCB 63 Amps 4 pole 415 volts 10kA Ics=75% Icu including extended terminals all as specified and directed.Make: Legrand / Siemen/Hager/C&S/ABB

MCCB 250 Amps 4 pole 415 volts 36 kA Ics=75% Icu including extended terminals all as specified and directed.Make: Legrand / Siemen/Hager/C&S/ABB

Earhting complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvenised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 05 connected to earthing test point all as specified or indicated including testing on completion.

Earthing with 600 x 600 x 6mm galvanised steel earth plate electrode buried verticaly in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge not less than 1.5m below ground level, connected to and including GI strip of size 32x6mm by means of bolts, nuts, check nuts and washers of galvanised steel (and 50mm dia GI light grade pipe for protection of GI strip) to the extent of 7.5m as earthing lead and connecting to the eqpt viz transformer, LT kiosk etc. incl charcoal dust and salt packed all around the earth plate in the earth pit all as per electrical plate No 05 of SSR part-I including chamber made up of PCC 1:2:4 type B1 with MS angle iron frame CI cover with provision of locking arrangment and 20mm dia light grade GI. Pipe from top edge of the earth plate upto MS funnel with wire mesh provided inside the concrete earth pit for watering arrangment, including excavation and earth work in any type of soil strate and testing including demolition of old earthing complete all as specified and directed. Note : GI strip of size 32 x 6mm alongwith protection pipe more than 7.5 mtr will be measured and paid for seperately.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire

Extension to Earth continuity or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit or fixed on indicated situtation for loop eathing etc as required but 32X6 mm galvanised iron strip

M/S Gupta and Sons

m/s krishna engineers1