Construction of Ultra Modern Fire Station at M.C.Panipat (Haryana)

Amount

Providing and fixing Toilet cubical of required size as per drawings including 600mm door size width, made up of thermosetting resign treated high pressure ,self supporting decorative compact laminates with permanently incorporate anti-bacterial agents(under JIS Z2801:2000 certification) during manufacturing. Compact board should be resistance to water immersion through permissible increase on thickness and mass (0.60% and board density )1.35kg/cm3 and fulfilled the criteria of green guard gold certification and manufactured under EN438-2and3:2005 standard. 12mm thick compact board should be Moisture resistant, Impact resistant, termite resistant ,Scratch resistant ,Weather and climatic shock resistant. Compact laminates should be of approved shade and finish and includes door, pilasters and intermediate panels finished with approved texture/shades as per IS2046 and fulfilled the criteria of fire retardant under BS-476/97 and EN438-6 with classification of BS1D0 standard. Pilaster to be supported with SS(grade316) adjustable foot and intermediate panels will attached to the wall with the help of approved SS(grade316) channels and all required hardware, made up of stainless steel as per manufacturer’s specification.

`Supply of 15W surface downlighter made of Pressure die cast aluminium suitable for general lighting. Luminaire should have die cast heat sink with polycarbonate cover. The luminaire should have CRI ) 80 and CCT of 5700K, SDCM(3 as per ANSI Bin C78.377A. The luminaire shall be compliant with IP40 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 1650 lumens and maximum system wattage of 15Watts. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The isolated constant current electronic driver used shall have a power factor )0.95@full load , THD (5%, Surge protection 2.5KV, Operating voltage range: 100-265V AC, Fixture should have class I indulation. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Including 3 core 2.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. upto suitable point complete as required. Dimensions: Ø152x71mm (±2mm), Weight should not be more than 0.45Kg. Approved Model: LD06-17157SMHEG1FS or equivalent in LT/Regent`

`Supply of 15W Recess type IP40 LED Round shaped Downlighter fitting made of Aluminum Pressure die cast housing duly powder coated and opal diffussser, having CCT range 5700K, system efficacy = 110lm/W (not LED Chip efficacy), CRI=80, SDCM ( 3, Mimimum System Ouput = 1650 Lumens, useful life of 50,000 hrs at L70 and driver having isolated constant current topology with PF = 0.95, THD(5%, Operating voltage range: 100-265V AC and Surge Protection of 2.5KV suitable for installation on the false ceiling including connection with 3X1.5 sq.mm FRLS PVC insulated copper conductor,earthing etc complete as required. The LED fitting must have the embossed/engraved logo the approved make (fittings with stickers shall not be approved). BIS Certificate issued to the approved make along with LM79 report from NABL lab must be shared at the time of supply. Cut-out dimension: ø145 ± 2mm, Fixture dimension: ø159 X 39mm (±2mm), Weight: 0.335gm Approved Make: Wipro LD06-171-XXX-57-FS or equivalent in Trilux/Regent`

`Supply of 18W Recess type IP40 LED Round shaped Downlighter fitting made of Aluminum Pressure die cast housing duly powder coated and opal diffussser, having CCT range 5700K, system efficacy = 110lm/W (not LED Chip efficacy), CRI=80, SDCM ( 3, Mimimum System Ouput = 1980 Lumens, useful life of 50,000 hrs at L70 and driver having isolated constant current topology with PF = 0.95, THD(5%, Operating voltage range: 100-265V AC and Surge Protection of 2.5KV suitable for installation on the false ceiling including connection with 3X1.5 sq.mm FRLS PVC insulated copper conductor,earthing etc complete as required. The LED fitting must have the embossed/engraved logo the approved make (fittings with stickers shall not be approved). BIS Certificate issued to the approved make along with LM79 report from NABL lab must be shared at the time of supply. Cut-out dimension: ø145 ± 2mm, Fixture dimension: ø159 X 39mm (±2mm), Weight: 0.335gm Approved Make: Wipro LD06-221-XXX-57-FS or equivalent in Trilux/Regent`

`Supply of 2ft length, 10W LED Mirror luminaire wall mounted delivering minimum system lumen of 1100 lumens and the luminaire shall be with system efficacy 110 lm/W. The luminaire Housing shall be made of extruded aluminium and the diffuser shall be of PMMA/PC. The operating CCT shall be 6500K with CRI of =80, SDCM(5. The luminaire shall be with BIS Registered electronic driver with input voltage range of 150 to 270V , THD = 10% and PF = 0.95. LED Life with L70 Criteria should be 50,000 hours. IP20 protection. The LED Driver shall be easily available in India for repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 and LM80 issued by LED manufacture along with Photo Biological Safety Standard. Approved make: Wipro LL20-111XXX65ALFS or equivalent in LT/Trilux`

`Supply of 20 Watt 4 feet Surface / Suspended / Wall Mounted IP40 LED Batten with minimum luminaire system efficacy of 135 lm/w having a color temperature of 5700K and housing should made up of Aluminium Anodized Extruded with high efficiency Polycarbonate diffuser with intergrated isolated constant current driver, LEDs used are SMD, Life of LED 50000 burning Hrs. @L70 Lumen maintenance, CCT 5700K, CRI=80, PF=0.95 and THD(10%, an operating Voltage Range of 150 - 270 VAC. Minimum Internal Surge Protection 4KV. The fixture design should comply driver leakage current as per as per IEC 60598 along with BIS certification for LED Driver and Luminaire. Luminaire manufacture shall provide LM79 report from NABL accredited lab. Dimension: 1185 X 40 X 45mm, Weight: 0.55Kg. Approved Make: Wipro LL24-621-XXX-57-FS or equivalent in LT/Osram`

`Supply of 32 Watt 4 feet Surface / Suspended / Wall Mounted IP66 LED Batten with minimum luminaire system efficacy of 125 lm/w having a color temperature of 5700K with SDCM ( 3 and housing should made up of Co-extruded polycarbonate (IK10) with high efficiency UV Stabilized Polycarbonate diffuser with intergrated isolated constant current driver, LEDs used are SMD, Life of fixture 50000 burning Hrs. @L70 Lumen maintenance, CCT 5700K, CRI=80, PF=0.95 and THD(10%, an operating Voltage Range of 150 - 270 VAC. Minimum Internal Surge Protection 4KV. The fixture design should comply driver leakage current as per as per IEC 60598 along with BIS certification for LED Driver and Luminaire as per IS 10322 part 5/Sec 1: 2012. Luminaire manufacture shall provide LM79 report from NABL accredited lab. Fixture should have class I insulation. Dimension: 1003 X 48 X 62mm (±2mm), Weight: 0.6Kg(±0.25Kg). Approved Model: Wipro LE23-501-X57HEG1FS or equivalent in Regent/Trilux/LT`

`Supply of 30W Recess mounted LED 2`x2` luminaire delivering an initial system lumen of 3600 lumens and the luminaire shall be with system efficacy = 120lm/W. Housing: CRCA white powder coated white, Optics: HET diffuser, IP20 Protection. The operating CCT shall be 5700K with CRI of =80, SDCM(3. The luminaire shall be BIS Registered with isolated type electronic driver in polycarbonate / metal enclosure with input voltage range of 150 to 270V , THD = 5% and PF = 0.95, 50,000 Hrs LED Life with L70B0 Criteria. The LED Driver shall be of same make and made in India for ease of repair and service. The LED shall be SMD type. Luminaire shall have minimum surge protection of 4KV. The luminaire shall be with following certifications: LM79 and LM80 issued by LED manufacture along with Photo Biological Safety Standard. Dimension: 595 X 595 x 36 mm (± 2mm), Weight: 1.4Kg. Approved Make: Wipro CRCO10R036HP57FS or equivalent in Regent/Trilux`

`Supply of LED linear bay light fitting made of single piece pressure die cast aluminium of LM6 grade of 100W having System Efficacy )145 lm/W, beam able of 60deg with PC lens for better efficiency and heat transmission, system output of more than 14500 Lumens for 100W, THD (5%, Power Factor )0.95, CRI )70, CCT 5700, 60deg beam angle, Full IP66, Life L70B0 @ 75k hrs at plus 45deg C ambient temperature. The input voltage should lie between 140-280V AC. BIS compliant driver with efficiency more than 85%. Driver shall have 6KV Surge protection. Dimension: 610 X 90 X 82mm (±2mm) and Weight: 2.6Kg (±0.25Kg). Approved Model: Wipro LH26C-142-60-57-FS or equivalent in LT/Regent`

Supply, installastion, testing and commissioning of LED Bulkhead with a nominal system lumen output of 600 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI ) 70. The luminaire shall meet IP66 rating and IK 09 rating with THD ( 20% and PF ) 0.9. The luminaire housing should made of High pressure die cast Aluminium with polycarbonate front diffuser. The total power consumption should not exceed 10W (including driver). Including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. Up to suitable point complete as required. Approved Model: Wipro LW07-141-XXX-57-G1 or equivalent in LT/Regent

Supply of Black painted Extruded aluminium housing. Green / Red LED’s mounted inside the housing. Laser engraved Signage matter on Single / Double Acrylic sheet fixed on one side. In double sided version black paper is inserted. Ni-Cd Battery back up to 2 hrs. (Charged up to 8 - 10 Hrs).Mounting strings provided for pendent mounting Operating Voltage 150-280V AC Ambient operating temperature. – 0 to 450C Ingress protection – IP42.

Supplying of 250 mm sweep Exhaust fan with all accessories suitable for operation single phase 230 volt 50 cycle per second per sec. AC supply etc. as required. in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning earthing etc. as required.

Design, Manufacturing, Supply of Main LT Panel. The panel will be totally enclosed type with, free standing, floor mounted, indoor duty, dust and vermin proof, compartmentlized, front operated, electrical panel fabricated from 2 mm thick CRCA Sheet as per specifications and drawing laid in this document and will be complete with the main and auxiliary bus bars, interconnection wiring, earth bus and will be powder coated finish with more than 50 microns. The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. The panel shall have Electrically interlocking with buscoupler switching, auto operation of incommer and bus coupler etc and having following incomming and outgoing Air Circuit Breakers, MCCB as per the drawing and specification. Fault level shall be 50 KA. Each Incomming / Outgoing Air Circuit Breaker shall have microprocessor release and variable current setting from front, adjustable overcurrent, short circuit and earth fault protection, front extended lockable handle, pad lockable in off position, shrouding on incomer side, termination shall be suitable for aluminium bus bars / cables and as per SLD. (Fault Level - 50 KA.) The MCCB rating up to 250A shall have thermal megnatic based adjustable over current and short circuit and above 250A MCCB shall have microprocessor based adjustable over current, short circuit, earth fault protection. (36 KA) INCOMING FOR TRANSFORMER 1 No. 800 Amp FP Electrically operated horizontal drawout type Air Circuit Breaker microprocessor based releases for O/C,S/C and earth fault protection with instantaneous. (50 KA) All the incomings and outgoings of Main LT Panel shall have Multifunction meter with RS-485 communications and integrated to BMS, internal control wiring shall be done. Nothing extra shall be payable. INCOMING FROM DG SETS 1 No. 800A feeder incomer and Each incomer breaker feeder shall have following: 1 No. 800 Amp FP Electrically operated horizontal drawout type Air Circuit Breaker microprocessor based releases for O/C,S/C and earth fault protection with instantaneous. (50 KA) 3 No. indicating lamps to show the incoming power along with protection SP MCB`s. 1 No. Digital Ammeter 800A wth ASS, CT`s. 1 No. Voltmeter and VSS. 1 No. Multifunction Meter with CT`s. 1 No. Load Manager EM 6400 with RS 485 port 1 No. REF relay Announciation window to cover LLOP, HWT, OIL Pressure, U/V, O/V, U/F, O/F, O/C, E/F, REF relay faults shall be provided. 2 nos phase reversal relay shall be provided. Engine should trip on LLOP, HWT, oil temp, O/V, O/F and breaker should trip on other faults. Initially U/V and U/F will be bye passed till oil pressure is picked up. Indicating lights for ACB ON / OFF, ACB trip, neutral contactor ON, D.G. on mains, D.G. fails to start. Generator start /stop facility through push button from panel, necessary cranking relay shall be provided. Suitable battery charger for 24V with d.c voltmeter and d.c ammeter. D.C voltmeter and ammeter will be analouge type. Whenever D.G. stop through PB, load shall be disconnected first. 1 No. master trip relay (one for each Incoming Breaker). BUSBARS 1000 Amp TPN busbars of aluminium alloy as per SLD. INSTRUMENTS FOR TRANSFORMER INCOMMER 01 No. Multifunction Meter with CT`s. 01 Set of phase indicating lights (RYB) with protection SP MCB`s. (one set for each incoming breaker). 1 Set breaker `ON` and `OFF` indicating lamp (one set for each incoming breaker). 1 Set trip circuit healthy indicating lamp (one set for each incoming breaker). 1 Set of CT`s one of 800/ 5Amp ratio for APFC relay. 1 No. master trip relay (one for each Incoming Breaker). 1 Nos. 3 phase, over voltage and under voltage relay. (one for each Incoming Breaker). 1 No. 3 phase, phase reversal relay with single phasing preventor. (one for each Incoming Breaker). 1 No 8 window announciator with accept, reset push button and hooter. (one for each Incoming Breaker). 01 No. Transit Voltage Surge Suppressor (TVSS) with control MCB. OUTGOING EACH OUTGOING FEEDER SHALL HAVE DIGITAL MFM 2 Nos. 630A TP plus N Moulded Case Circuit Breaker with microprocessor based adjustable over current, short circuit, earth fault protections, ON /OFF indication. 1 No. 400A TP plus N Moulded Case Circuit Breaker with microprocessor based adjustable over current, short circuit, earth fault protections, ON /OFF indication. 3 Nos. 250A TP plus N Moulded Case Circuit Breaker with microprocessor based adjustable over current, short circuit, earth fault protections, ON /OFF indication. 1 No. 160A TP plus N Moulded Case Circuit Breaker with thermalmagnetic based adjustable over current, short circuit, earth fault protections, ON /OFF indication. 3 Nos. 100A TP plus N Moulded Case Circuit Breaker with thermalmagnetic based adjustable over current, short circuit, earth fault protections, ON /OFF indication. 5 Nos. 63A TP plus N Moulded Case Circuit Breaker with thermalmagnetic based adjustable over current, short circuit, earth fault protections, ON /OFF indication. Panel Describe as above.

Supply and erection of Digital MFM with CT`s.

Supply and erection of phase indicating lamps / ON / OFF / TRIP indicating lamps with MCB.

Supply and erection of Type-II SPD

`Supply of LED street light fitting not more than 45W having System Efficacy )130 lm/W, system output )=5850 Lumens, THD(8% @ full load, Power Factor )0.95 @ full load, power factor )0.95 @full load, SDCM(5, CRI )70, CCT 5700, 1W Class EMC Package LEDs of L70B0 lifetime of 50,000hrs @ 35deg C ambient temperature. Full IP 66 ( with out Glue) protected single piece die cast aluminium housing having PC window with Impact resistance IK10. Minimum 1.6mm thick MCPCB to be used for better thermal management. Luminaire operating voltage should lie between 130-300V AC. Luminiare should be suitable for Pole dia of 30-40mm. LED driver should be isolated type constant current silicone Potted and Encapsulated with Auto Cutoff proteciton for low voltage, high voltage and 440V input for 48 hours. Fixture should have BIS compliance. Driver shall have 4KV internal Surge protection and 10KV SPD shuld be inline with luminaire. Ambient temp range: 0deg to 45deg C. It will be connected with 3C 1.0sq.mm,0.5m-flying cable for interface to Mains. It should meet all international Quality standards IEC60598. Approved Make: Wipro LR08-611-XXX57SPFS or Equivalent in Regent/LT`

`Supply of LED Post Top with a system lumen output of 4500 lumens and a minimum system efficacy of )100 lm/W. The luminaire shall have a rated system lifetime of )50,000 burning hours at L70. The luminaire should have a color temperature of 4000K/5700K and CRI ) 70. The luminaire shall meet IP66 and IK07 with THD ( 10% at full load and PF ) 0.95. The total power consumption should not exceed 45W (including driver). Surge Protection of 4KV is provided. The driver and fixture should be BIS approved. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Dimension: Ø336 X 370mm and Weight including all accessories should not be more than 2.2Kg. Approved Make: Wipro LP09-501-XXX-57-FS or equivalent in Osram/LT`

`Supply of LED based Spike light, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness and embossed brand name/logo name of manufacturer and optics made of surface mount reflector with toughened. The fixture should have a minimum system efficacy of 80lumen/Watt and a minimum system lumen output of 640 lumens and maximum system wattage of 8 Watts.The fixture shall have a CRI of minimum 80 and beam angle: 50-55deg. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP67 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK )=07, CCT: 2700K. The fixture driver should have an operating voltage range of 100-270 V, surge protection of )=3KV, PF )0.9, THD(10% and Driver efficacy )80% @full load and rated voltage. Ambient temp range: 0deg to 45deg C. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL . LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Dimension: Ø115 X 158 X 93mm and Weight including all accessories should not be more than 1.5Kg. Approved Make: Wipro LF05-600-055-27-FS or equivalent in Osram/Regent`

`Supply of LED based Bollard light, housing made up of pressure die cast aluminum Alloy with effective thermal management,sturdiness and embossed brand name/logo name of manufacturer and optics made of surface mount reflector with toughened. The fixture should have a minimum system efficacy of 100lumen/Watt and a minimum system lumen output of 1000 lumens and maximum system wattage of 11 Watts.The fixture shall have a CRI of minimum 80 and beam angle: 50-55deg. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP67 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK )=07, CCT: 2700K. The fixture driver should have an operating voltage range of 100-270 V, surge protection of )=3KV, PF )0.9, THD(10% and Driver efficacy )80% @full load and rated voltage. Ambient temp range: 0deg to 45deg C. The Drivers should be a potted driver not a printed circuit board without casing, mounted inside the luminaire. The fixture should comply with the parameters as per IS10322. Manufacturer shall have inhouse lab approved by NABL . LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. Dimension: Ø115 X 158 X 93mm and Weight including all accessories should not be more than 1.5Kg. Approved Make: Wipro LB16-131-XXX-57-05 or equivalent in Osram/Regent`

Providing, installation testing and commissioning of `Silent Type` Diesel Generating Set along with having prime power rating 500 KVA, 415 Volts at 1500RPM, 0.8 lagging Factor at 415 V suitable for 50 Hz, 3 phase system and for 0.85 load factor and consisting of the following:- Diesel Engine Diesel Engine 4 stroke radiator cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 400C, 50% RH and at 1000 metre MSL and confirming to BS 5514, BS 649, is 10000, capable of taking 10% overloading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. Engine Mounted Instrument Panel fitted with and having digital display for following: Start- stop switch with key. Water Temperature indication Lubrication Oil pressure indication Battery charging indication RPM indication Over Speed trip Indication Low lubrication oil trip indication Engine Hours Indication Alternator: Synchronous alternator rated at 500 KVA, 415 Volts at 1500 RPM, 3 phase 50 Hz, AC Supply with 0.8 lagging power factor at 400C, 50% RH and at 1000 metre MSL. The alternator shall be having SPDB enclosure, brushless, continuous duty, self-excited and self-regulated through AVR confirming to IS:4722/ BS 2613 suitable for tropical conditions and with class- F insulation. Alternator shall have provision of end termination of Aluminium Bus Duct. Base Frame and Foundation Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. Fuel Tank: Daily service fuel tank of 990 litres capacity, fabricated out of 3mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class `C pipes of suitable dia. Complete with valves level indication and accessories as required as per specifications. Exhaust System : Dry exhaust mainfold with hospital grade exhaust silencer. Starting System: 24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with 2 Nos. of batteries (25 plates, 160 AH lead Acid type) as required as per specifications. Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine and alternator, extraction, discharging hot air into the atmosphere as per specifications. The Acoustic Enclosure shall be factory fitted by the OEM. The DG Set shall be provision of SCADA compatibility. Diesel Generating Set including Acoustic Enclosure. described as above.

Supply, Installation, Testing and Commissioning of following sizes MS exhaust piping heavy duty conforming to IS:3589 complete with all accessories such as bends, flanges, stainless steel flexible bellows etc. as required. 250 mm dia MS pipe. (5.0 mm thick)

Providing and Fixing of Insulation and aluminium cladding for exhaust piping using 75 mm thick rockool of density 150 Kg/ M3 and 24 SWG Aluminium Sheet.

Design, Manufacturing, Supply, Receiving, Unloading, Shifting, Installation, Tesing and Commissioning of 11KV Outdoor type Package Sub-Station consisting of 11/0.433KV, Oil type, OLTC transformer, HT 3 way 11 KV RMU, LT Panel inside GI sheet steel enclosure with all interconnections, fully type tested as per the IEC-1330 complete in all respect consisting of following items and as per detailed technical specifications: 11KV, 3 way RMU with 2 Nos 630A Load Break Switch and 1 No breaker of 630A VCB with self powered IDMT relay, 18KA/3 sec. All the live parts, modules, isolators, earth switches must be sealed within robotically welded single stainless steel tank filled with SF6 gas as insulation having IP67 degree of protection. Each module of the panel should have hinged arc proof cable doors with self interlocking mechanism to the corresponding earth switch, all cable terminations shall be from the front, ring core CTs for metering and protection purposes, self powered microprocessor based numerical 3 O/C and 1 E/F relay for protection. Transformer auxiliary protection relays for OTI and WTI trip and alarm with 12 window annunciation in outgoings. Arrangement for connecting incoming cable and outgoing to primary of transformer. Multifunction Meter (A, V, KWH, kVAR, PF) in the Line PT panel along with 1set of PT of 11kV/ 110V CL1.0, 50VA. 433V LT Indoor panel with Aluminium Busbars, Fabrication using 1.5/2 MM CRCA sheet steel, Ingress protection IP4X, solidly earthed at substation complete with internal wiring, 1set of LT cast resin CT`s, PT`s and multifunction meter Load Manager (A, V, kWH, kVA, kVAR), R Y B indication lamps, ON/ OFF/ Trip indication lamps, control MCB`s and wiring etc. consisting of following. The panel shall include 800Amp. MDO ACB Fixed, 4 pole, 50 KA with microprocessor based O/C, S/C and E/F releases. Breaker to act as Incomer cum outgoing. Ics=Icu for the breaker. Outdoor type enclosure having modular construction of Galvanized Sheet Steel. The Enclosure shall have IP54 degree of protection for HT and LT switchgear compartment and IP23D degree of protection for Transformer compartment. The enclosure exterior shall be painted with poly urethane paint. Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for each compartment. Interconnection Between HT switchgear and Transformer using XLPE Single core cable and Interconnection between Transformer and LT switchgear using Busbars. All metallic components shall be earthed to a common earthing point. 500 KVA, 11kV/ 433V, DYn11, ONAN, Oil type transformer with On Load Tap changer of plus 5% to -15% in steps of 1.25 % Transformer. Losses should be as required by Lates IS 1180 Level 2. / ECBC 2017 ECBC plus Building. Internal factory connections Between HT switchgear and transformer shall be done using 1Cx3x185Sq.mm XLPE single core copper condutor cables and interconnection between transformer and LT switchgear using tinned copper busbars. All metallic components shall be earthed to a common earthing point. Unitised substation as described above

Supply, installation, testing and commissioing of 50 KVA Online UPS in paralleling mode at 0.99 input power factor, UPS efficiency 0.93%, hormonic THDi less than 3%, Remote alarm indication panel, SNMP card as per specification given in the document with following broad features. THD(i) shall be less than 3% in the entire loading range. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 1 min. Three Phase Input and Three Phase Output. (Input - 380V - 470V, Three Phase, 4 wire. / Output - 380-400-415 Volt, Three Phase, 4 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 30 minute backup on 100% load. UPS shall be compatible for minimum 3 nos. unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. Suitable size cable from UPS to battery bank. UPS described as above

Supply, installation, testing and commissioing of 30 KVA Online UPS in paralleling mode at 0.99 input power factor, UPS efficiency 0.93%, hormonic THDi less than 3%, Remote alarm indication panel, SNMP card as per specification given in the document with following broad features. THD(i) shall be less than 3% in the entire loading range. UPS shall carry design output at 40 deg. Shall have soft start and hold of for incoming supply. Invertor capability to supply 150% load for 1 min. Three Phase Input and Three Phase Output. (Input - 380V - 470V, Three Phase, 4 wire. / Output - 380-400-415 Volt, Three Phase, 4 Wire.) Shall not allow deep discharge of the battery and shall not go to 10.5 volts in case of 12 volt cells. Battery shall be external type with rack and suitable for 30 minute backup on 100% load. UPS shall be compatible for minimum 3 nos. unit in parallel operation. (Synchronize). Parallel operation kit shall be supplied with UPS. Suitable size cable from UPS to battery bank. UPS described as above

`Supply, installation, testing and commissioning of CAT 6A UTP LSZH Cable, 23 AWG solid copper conductors in accordance to TIA/EIA 568 C.2 (Category 6a) and ISO/IEC 11801 2nd ed(Class Ea), UL Approved, tested @500 Mhz, with HDPE insulation of individual conductor and over all Dia of 7.2 mm for Connectivity of Hub room to End Point. Grey Color. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of CAT 6A UTP Universal (both tool and toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and UL approved,for Data, Voice, and Wi-Fi at user end. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of loaded 24 port CAT 6A UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6A cable termination at rack end. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of CAT 6A UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 and ISO/IEC 60603-7 white for I/O fixing at user side. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of 27 floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Approved Makes: Der Wiser/MTS/Rittal/APC/APW`

`Supply, installation, testing and commissioning of Pure IP at core server Based voice solution with 04 Port Voicemail ,04 Port FXS ,04 Port FXO ,1 PRI Trunk lines (30 Ch) Circuit with CLIP Facility , 30 IP users License ,01 Nos. IP Operator Console, 100 Party Conference ,Speed Dial, Music on Hold , Internal/ External ring difference ,Call Barring, Call Pickup, TEC should be with GR Number, - Should Support Redundant server in active-Active mode. Approved Makes: Tadiran/Arista /Polycom/Toshiba/ Aeonix/Nexxus`

`Supply, installation, testing and commissioning of Type 1 IP Phone 1 VoIP account , Full duplex speaker phone, IPV6, 2xLAN, PoE . Approved Makes: Tadiran/Arista /Polycom/Toshiba/ Aeonix/Nexxus`

`Supply, Installation, Testing and Commissioning of 24 Port POE plus Access Switches with switching capaticy of 128 Gbps, forwarding performance 92 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W, with 4 x 10G SFP plus uplink ports. Should Non Blocking architecture , 16K MAC address. Should have Static Routing ,RIP,VRRP, OSPF from day 1,Should support ISSU from day 1 ,Should support stacking with min 12 members in a stack, Neighbor discovery, system logging, Telnet, SSH, SNMP, Network Time Protocol (NTP), IPv6 features from day 1 , MTBF Min 198000 Hr Approved Make : Cisco/ Nexxus/Juniper / Extreme/Impulse`

`Supply, Installation, Testing and Commissioning of 2x2 Access Point Ceilling Mount having 10/100/1000M Base-T WAN Port (IEEE at/af standard PoE supported), 1x1G LAN Port .For 2.4G 573Mbps, 2*2 MIMO. For 5G 1200Mbps, 2*2 MIMO. 200 square meter coverage (without any obstacle).Built-in omnidirectional internal antennas. Antenna gain: For 2.4G: 3dBi and for 5G: 3dBi.Maximum number of users per band should be minimum 128. power consumption:18W.Encryption: AES, WPA3\802.11i: Supported, Authentication: MAC Address/PSK, Client isolation: Both Layer-2 wireless client isolation and SSID isolation,Forwarding security: Packet filter, MAC address filter, and broadcast storm suppression,SSID-VLAN binding: Supported,Management frame protection (802.11w): Supported.Should be CE, FCC, CCC, ROHS certified Approved Make : Cisco / Juniper / Impulse / Nexxus/Arista `

`Supply, installation, testing and commissioning of CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Point. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of CAT 6 UTP Universal (both tool and toolless) information outlet (I/O) in accordance with ANSI TIA 568 C.2, IEC 60603-7-4 2nd Edition, ISO/IEC TR 11801-9901-2014, ROHS Compliant. The I/O should have minimum 750 mating cycle and 200 insertion cycle and UL approved,for Camera at user end. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of loaded 24 port CAT 6 UTP, Transparent shutter jack panel, 1U height, UL-94V-0, Black with cable support bar, clear label marks and earthing plug for CAT6 cable termination at rack end. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 1 Mtr for rack side switch to jack panel connectivity. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of CAT 6 UTP, LSZH Patch Cord as per ANSI/TIA/EIA 568C.2 and UL 94-V-0, ROHS Compliant, patch cord 2 Mtr for rack side switch to end user connectivity. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply, installation, testing and commissioning of 1, 2 and 4 port face plate, British Style with Shutter, 2 Plate system clear finish with transparent labelling, ABS-UL94-V2, ROHS Compliant, in accorandce with standards like ANSI/TIA-568-C.2, ISO/IEC 11801:2002 AMMD.2:2010, YD/T 926.3-2009 and ISO/IEC 60603-7 white for I/O fixing at user side. Approved Makes: Derwiser/Nexans/Siemon/Systimax`.

`Supply, installation, testing and commissioning of 5 MP Dome camera , ONVIF profile S , Gand T ,UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream with each stream support H.265 compression simultaneously ,min illumination : Color 0.05lux @ F1.2(AGC ON) : B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression : H.265/H.265 plus /H.264/H.264 plus .SD card support upto 256GB , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP ,Edge analytics : Customer Flow staistics, Cross COunt, Heat Map, Human and Vehicle Detection, Pedestrian Intrusion Detection and Line cross Detection. Queue length detection, Regional population statistics, SOD-Stationaary Object Detection. , In built IR LED , IR Distance upto 45 meters , IP 66 ,IK10,POE.Audio -1 input/1 output Approved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis`

`Supply, installation, testing and commissioning of 5 MP Bullet camera , ONVIF profile S ,G and T . UL , CE , FCC Certified ,1/2.7” Progressive Scan CMOS ,2.7 mm to 13.5 mm motorized varifocal lens , Quad stream with each stream support H.265 compression simultaneously ,min illumination : Color 0.05lux @ F1.2(AGC ON) : B/W 0 lux @ IR ON , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,WDR , Compression : H.265/H.265 plus /H.264/H.264 plus /MJPEG .SD card support up to 256Gb, Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : Customer Flow staisticsCross Count, Heat Map, Human and Vehicle Detection, Pedestrian Intrusion Detection and Line cross Detection. Queue length detection, Regional population statistics, SOD-Stationaary Object Detection. , IR Distance upto 45 meters , IP 66 , POE. Audio -1 input/1 output Approved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis`

`Supply, installation, testing and commissioning of 64 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X RJ45 ethernet , iOS smartphone support , 8 HDD support , each HDD slot support upto 8 TB HDD , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be integrated with NVR . Artificial Intelligence Support having face recognition with compatible deep learning supported cameras, AI-Face registered quantity upto 10,000, A.I maximum captured quantity 200,000. UL,CE,FCC certified. Approved Makes : Allgovision/ Impulse / Avigilon / Cisco/ Axis`

`Supply, installation, testing and commissioning of 8TB Surviellance Hard Disk. Approved Makes: WD /segate /Toshiba/HP`

`Supply, installation, testing and commissioning of Full HD 55`` LED Professional Display Panel. Approved Makes: Panasonic / LG/ Sony/ Samsung `

`Supply, installation, testing and commissioning of L2 plus managed industrial PoE switch with 24*10/100/1000M RJ45 ports and 4*1/10G SFP plus fiber slot ports, Port 1-24 can support IEEE 802.3af/at PoE standard, switching capaticy of 598 Gbps, forwarding performance 95.23 Mpps, maximum PoE output power is 400W(at-600W), with 32K MAC address. Should have Static Routing , system logging, Telnet, SSH2.0, SNMP V1/V2C/V3, Network Time Protocol (NTP), FTP, TFTP, Xmodem. Approved Make :Cisco/ Impulse / Juniper / Nexxus`

`Supply, installation, testing and commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz): RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz : Keyboard: 12 function keys: Chassis: Tower/Workstation: DVD: 8X Slimline DVD plus /-RW, Data Only: Dual Graphics Card: Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000: Hard disk: 250GB, 7200 RPM 3.5`` SATA 6Gb/s Hard Drive: Operating system: Windows 7 Professional 64 Bit or latest. Approved Makes: HP / DELL / IBM / LENOVO`

`Supply, installation, testing and commissioning of 1X500W Class-D Amplifier with 2 independent channels and can provide automatic re-settable overcurrent, overload, overheating, overvoltage, under-voltage and DC protection. Approved Makes : Actis / Honeywell / Bosch (Persadio)`

`Supply, installation, testing and commissioning of 15U wall mount rack with fans, 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. Approved Makes: Der Wiser/MTS/Rittal/APC/APW`

`Supply, installation and testing and Commissioning of Chairman unit with Wired Table Top unit with built in speaker and Rj45 Loop in and out, Internal high-fidelity loudspeaker, 48K audio sampling rate and 20Hz~20KHz frequency response, Support AGC/AFC/ANC,Signal to Noise Ratio:70 dB, Frequency response:20 ~ 20000Hz,Cardioid, Sensitivity -_ 46dBV/Pa,Length-485mm OLED Display, MIC ON/OFF,priority button and consent button Chairman unit has priority to close all other units or mute them temporarily and consent the request for speaking from delegate, Should have 3.5mm Stereo Headphone Jack. Approved make:-Peoplelink / Shure / Sennheiser`

`Supply, installation and testing and Commissioning of Wired Table Top Delegate unit with built in speaker and Rj45 Loop in and out, Internal high-fidelity loudspeaker,48K audio sampling rate and 20Hz~20KHz frequency response,Support AGC/AFC/ANC, OLED Display, MIC ON/OFF,Volume up and down,Input impedance:2 kO, Signal to Noise Ratio:70 dB,Frequency response:20 ~ 20000Hz, Cardioid,Sensitivity -_ 46dBV/Pa,Length-485mm,Should have 3.5mm Stereo Headphone Jack. Approved make:-Peoplelink / Shure / Sennheiser`

`Supply, installation and testing and Commissioning of Conference control unique digital ring network technology achieve full-digital signal transmission and processing,48K audio sampling rate,Output 16 segment equalized EQ to achieve sound field adjustment, AGC automatic volume gain control,AFC automatic feedback suppression and auto-mix technology,advanced noise cancellation technology,Echo cancellation,USB audio recording, Audio Input:2 channel audio input, XLR or RCA type, for local audio input or remote video-conferencing input.Front panel USB recording interface, 3.5mm headphone for monitoring Audio Output:Maximum 8-channel audio output, XLR, RCA and Phoenix type, Control Port:RS232 central control, realize microphone switch, priority, volume and other control,Camera Control:RS232 or RS485 to send the PELCO/VISCA protocol to realize camera auto-tracking function. Control and Indicators:LCD display to show all the operations and results 4-Way button for menu operate,One-button press to start recording light indicator,Master volume control knob Approved make:-Peoplelink / Shure / Sennheiser`

`Supply, installation and testing and Commissioning of 2-way, Ceiling-mount loudspeaker with 2 ways, Passive, low impedance power 30W@8 Ohms, Power 100V 3.8W/7.5W/15W/30W, Power 70V 1.9W/3.8W/7.5W/15W/30W, LF transducer 6.5`` woofer, HF transducer 0.5`` tweeter, Freq Range 90Hz - 20KHz, Coverage 155° x 155° @ 1KHz: 75° x 75° @ 4KHz,Sensitivity 88dB, Max SPL 102dB, Mounting Diameter 200mm, Fixation rotary anchors, Material Enclosure: Metal: Grille: ABS plastic. Approved make:- Workpro / Bose / QSC`

`Supply, installation and testing and Commissioning of Column Array Loudspeaker with Passive transducers 8x Woofers 2.75`` Diameter, Rated Impedance 8 ohms, minimum impedance 8.6 Ohms @ 595Hz, Power 100Wrms, Sensitivity 93dB SPL, Max SPL 119dB SPL, Freq range 150Hz to 23Khz (-10dB), 170Hz to 20kHz (-6dB), Recommended HPF filter Butterworth 24dB/Oct, 100Hz, Coverage 140° x 20°, IP protection IP65. Approved make:- Workpro / Bose / QSC`

`Supply, installation and testing and Commissioning of 2 channel Class D Amplifier with 300W @ 8 Ohm 2-channel, Freq Range 20 Hz - 20 KHz, THD plus N (0.15 %, S/N Rate )100 dB, Damping Factor )500, Gain 36 dB, Input Sensitvity 0.775 V / 1 V / 32 dB, Protections Soft start, VHF, DC, Overload, Clip, Limiting, Short-circuit, Over-temperature, Progressive volume. Approved make:- Workpro / Bose / QSC`

`Supply, Installation, Testing and Commissioning of 12 x 8 Networked Digital Signal Processor ,DSP with 12 inputs and 8 outputs, 12 Control Inputs and 6 Logic Outputs for GPIO Integration, 48V phantom power on all analog inputs, THD: (0.01% 20Hz to 20KHz, plus 10dBu output, should have AEC input for Microphone. Crosstalk: (-75dB, Open architecture software configurable, Separate logic processing power, 2 digital audio bus RJ 45 Port ,1 Ethernet port for Monitoring and configuration ,Capable to handle plus 5V unloaded logic output voltage , at-least 6,Should have speech sense engine ,Should have USB port inbuilt/External for soft VC integration.Capable to control 3rd party devices with TCP IP and RS 232 ,Should have 1nos of RS 232 port for integration with control System,Should have Bi-Directional Locate Functionality, Should have 48 or more digital audio Channel Bus, Should have monitoring LED for COM, STAT, ERR and PWR. Approved make:- BSS / Shure / Bayerdynami`

`Supply, Installation, Testing and comissioning of 86``Professional Display with UHD Resolution (3840 x 2160), Panel :VA/IPS,Brightness:Better: 330 Nits,Response Time:5ms,Display Colors:1.07 Billion,Audio: Built in Speaker,INPUT Type:HDMI 2.0 X 2,USB 2.0 x 2 , RS232 x 1, RJ45 x1, OUTPUT Type:Audio Out, RS232,Speacial features:Temperature Sensor,Pivot Display, Wireless Mirrioring, 8GB internal memory,EXTERNAL CONTROL:RS232C(in) thru stereo jack, RJ45, IR,Power Consumpstion:200W Approved make:- LG / Samsung / Sony`

`Supply installation Testing and comissioning of Wall mount for 86`` Display Approved make:- Custom / Equivalent`

`Supply installation Testing and comissioning of 14`` or better table monitor for chairman. Approved make:- Custom / Equivalent`

`Supply, Installation, Testing and Commissioning of Video Conference System with support H.323 and SIP standards for communications, Support interoperability and bandwidth saving using video compression H.264 AVC, H.264 High Profile, H.265,Support 1080p30 fps,720p 30 fps, support both wired content sharing using standard based H.239 .It should also support audio from PC used for content sharing. support G.711, G.728, G.729A, G.722, G.722.1, G.719 or betterAutomatic Gain Control and Automatic Noise SuppressionAspect ratio: 16 x 9 or better, Video Conference with covers a wide field of view of 70° or better, with the mechanical pan, tilt, and12x zoom or better that can be controlled using a simple handheld remote or touchpanel.HD 1080p video at 30 frame per second. Approved make:- Poly / Cisco / Lifesize`

`Supply, Installation, Testing and Commissioning of Cable Cubby with 2 X powwr socket and 4 or more passthrough holes for HDMi and LAN connectivity. Approved make:- Custom / Equivalent`

`SITC of Transmitter-HDBaseT Connectivity – extends an HDMI connection over a long distance via one Cat 5e/6/6a cable:POH (Power over HDBaseT) – supplies power from Transmitter to Receiver over a long distance via one Cat 5e/6/6a cable:Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners:Bi-directional IR channel – IR transmission is processed one direction at a time:Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a),1080p@60m (Cat 5e/6) / 70m (Cat 6a):4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0):4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4):Max. Data Rate:10.2Gbps (3.4Gbps per lane):Max. Pixel Clock:340 MHz:HDMI (3D, Deep Color, 4K),HDCP2.2 Compatible,Supports CEC Approved make:- Aten / Extron / Crestron`

`SITC of Receiver-HDBaseT Connectivity – extends an HDMI connection over a long distance via one Cat 5e/6/6a cable:POH (Power over HDBaseT) – supplies power from Transmitter to Receiver over a long distance via one Cat 5e/6/6a cable:Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners:Bi-directional IR channel – IR transmission is processed one direction at a time:Up to 4K@35m (Cat 5e/6) / 40m (Cat 6a),1080p@60m (Cat 5e/6) / 70m (Cat 6a):4096 x 2160 / 3840 x 2160 @ 60Hz (4:2:0):4096 x 2160 / 3840 x 2160 @ 30Hz (4:4:4):Max. Data Rate:10.2Gbps (3.4Gbps per lane):Max. Pixel Clock:340 MHz:HDMI (3D, Deep Color, 4K),HDCP2.2 Compatible,Supports CEC Approved make:- Aten / Extron / Crestron`

`Supply, installation and testing and Commissioning of Wireless Presentation For Meeting Space Collaboration, Should support one-click Skype for Business and Zoom meeting launch, Share content wirelessly from a mobile device or PC using Airplay or Google Cast, View documents from the web, cloud storage, network drive, or a USB thumb drive. Built-in document viewers allow for side-by-side view of two documents, and 4K support for dual monitors provides an optimal collaboration experience, CONNECTORS : 4x USB 3.0 , 2x USB 2.0 , 2x HDMI , Ethernet 2x RJ-45 connector for gigabit Ethernet, Analog Stereo Input 1/8” mini-stereo jack and Analog Stereo Output 1/8” mini-stereo jack, HDMI Resolution Up to 4K30, WIRELESS :WiFi 802.11 a/b/g/n/ac, SUPPORTED CALENDAR SYSTEMS :Supported Calendar Systems Microsoft Exchange 2013 SP1 or higher, Microsoft Exchange 2016 and Exchange Online (Office 365), Included Applications: Viewers for Microsoft PowerPoint, Word, Excel and Adobe PDF documents, Viewers for images and videos and Microsoft Edge web browser Collaboration System Approved make:- Barco / Extron / Crestron`

`Supply, installation and testing and Commissioning of Control Processor with Two RS-232/422/485 COM ports, Four RS-232 COM ports or better, Four IR/serial, 4 relay, and Four Versiport I/O ports, LAN Connectivity. Programmable event scheduling, Enterprise-class control system Support SD and SDHC Card upto32 GB and 8 GB Flash memory, SNMP remote management support. iPhone, iPad, and Android control app support. Power Input: 100 – 240 VAC, 50 – 60 Hz Output: 2.5 A @ 24 VDC. Approved make:- Aten / Extron / Crestron`

`Supply , Installation, testing and comissioning of 10 inch touch panel with Stand and provision for Charging. Approved make:- Apple / equivalent`

`Supply, Installation, Testing and Commissioning of 24 port Gigabit POE ( POE plus at least one port ) Network Switch with Multicast support with IGMP V1/V2, QoS support, IPV4/IPV6 Support, Advance Security Management, Switching Capacity in Gigabits per Second, 1 Gbps Non-blocking ports with standard accessories. Approved make:- Cisco / Netgear / Juniper`

`Supply, installation and testing and Commissioning of dual band Wireless Gigabit Router Approved make:- Cisco / Netgear / Juniper`

`Supply, Installation, Testing and Commissioning of 2 core Speaker Cable. Approved make:- Krystal / Belden / Sommer`

`Supply, Installation, Testing and Commissioning of 22-24 AWG two core sheilded Microphone / Control Cable. Approved make:- Krystal / Belden / Sommer`

`Supply, Installation, Testing and Commissioning of sheilded cat6 cable Approved make:-Dlink / Belden / Sommer`

`Supply, Installation, Testing and Commissioning of 1.8m HDMI cable Approved make:-Aten / Crestron / Extron`

`Supply, Installation, Testing and Commissioning of 10m HDMI cable Approved make:-Aten / Crestron / Extron`

`Supply, Installation, Testing and Commissioning of 15m HDMI cable Approved make:-Aten / Crestron / Extron`

`Supply installation and comissioning of 24U Equipment Rack with PDU and two tray and floor wheels . Approved make:-Powerride / Valrack / MTS`

`Supply installation and comissioning of cable and connectors. Approved make:-Neutrik / Amphenol / Equivalent`

`Supply ,Installation ,Testing and Commissioning of 2 Door 2 reader access control panel with with buttons for entering and reading cards and exiting the door, Large capacity of 24,000 users, 100,000 offline storage records. TCP/IP high-speed communication, convenient LAN and WAN wiring, The card reader can be connected to the international standard Wiegand 26bit-34bit Powerful functions. In addition to the access control function, the software also presents attendance, online patrol, conference sign-in, fixed consumption, WEB mother card function, and more cost-effective. Approved Makes : Lenel / Nexxus / Impulse`

`Supply, Installation , testing and commissioning of 12 V SMPS DC Power Supply Unit, highly regulated and spikes free terminal voltage and heavy sourcing current for regulated terminal voltage. Approved Makes : Lenel / Nexxus / Impulse`

`Supply and Installation of Operation system: Windows xp and the upward system, such as: Windows 2000 ?Windows XP ? Windows7?Windows Vista?windows nt?Windows 2000 sever?Windows 2003 ?Windows Server 2008 and so on Database :MS Access (the default database after installation is the bringing small database of operating system) MS SQL Server (suggest more than 200 people, or swiping card every day more than 1000 records, had better choose to use this article database.) Approved Makes : Lenel / Nexxus / Impulse`

`Supply, Installing, Testing and Commissioning of fingerprint, IC/ID swipe card Fingerprint capacity: 1000 pieces Short Range Multi Technology Smart Card Reader UL Listed For Exit of Lift Access Doors, tripod/Flap barrier- Entry and Exit (doors) as per the specification, with back plate and Back Box. Approved Makes : Lenel / Nexxus / Impulse`

`Supply ,Installation ,Testing and Commissioning of Smart Card Contactless transmission of data and supply energy (No battery needed), Operating Distance: Upto 100mm (Depending on Antenna Geometry), Operating Frequency: 13.56 MHZ. Approved Makes : Lenel / Nexxus / Impulse`

`Supply ,Installation ,Testing and Commissioning of Electromagnetic Lock 600 lbs, Single leaf, LED Status Display, Approved Makes : Assa Abloy / Ablesco / Impulse / BEL`

`Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG LSZH as per ANSI/TIA 568 C.2 and ISO/ IEC 11801–2nd Edition, ROHS Compliant, solid copper conductors, tested @250 Mhz, with HDPE insulation of individual conductor and over all Dia of 5.8mm for Connectivity of Hub room to End Point. Approved Makes: Derwiser/Nexans/Siemon/Systimax`

`Supply and Laying of 8 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers and the access controllers) Approved Makes : Polycab / RRKable / CMI / Paramount / Derwiser`

`Supply and Laying of 4 Core x 1.0 sq mm multi strand, copper, unarmoured shielded Cable as per specification (between the every card readers and the access controllers) Approved Makes : Polycab / RRKable / CMI / Paramount / Derwiser`

`Supply , Installation , Testing and commissioning of Exit push button as required. Approved Makes : Lenel / Nexxus / Impulse`

Supply , Installation , Testing and commissioning of automatic electromechanical boom barrier suitable road width 6 mtrs high speed with 1.5 sec to 6 second opening/closing time with MS Powder coated housing and aluminium boom with fork rest, IP 56 Protection etc. (for Gate -Entry/Exit). Approved Make :- Neptune, AVON, Magnetic/Somfy/Oandamp/SpeedGatz

Supply , Installation , Testing and commissioning of a set of Entry/Exit push buttons for manual open and closing of barriers etc. complete as required.(for Gate Entry/Exit). Approved Make :- Magnetic /Somfy/Oandamp/SpeedGatz/BeL/Idcube

Supply , Installation , Testing and commissioning of Photocell based safety device to avoid closing of the barrier when a Vehicle is crossing the barrier. ( Anti Fall Protection ). Approved Make :- Magnetic /Somfy/Oandamp/SpeedGatz

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. The contractor shall submit the structure strength calculation for approval before execution. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Supplying, installation, testing and commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. Below False Ceiling

Supplying, installation, testing and commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. Above False Ceiling

Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing and commissioning of response indicator on surface/recessed MS Box having two LED metallic cover complete with all connections etc as required.

Supplying, installation, testing and commissioning of addressable manual call point complete as required.

Supplying, installation, testing and commissioning of addressable fire control module complete as required.

Supplying, installation, testing and commissioning of fault isolator complete with base as required.

Supplying, installation, testing and commisssioning of intelligent addressable programmable sounder complete as required.

Supplying, installation, testing and commissioning of fire fighter phone jack complete as required.

Supplying, installation, testing and commissioning of fire fighter telephone handset complete as required.

Supplying and laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring and LSZH outer sheath complete as required.

Supplying, installation, testing and commissioning of 6 inches dia, 1.5/3/6 watts, ceiling speaker complete as required.

Supplying, installation, testing and commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing and commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape and size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash and mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification and direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 and IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed ) 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds Fixed window/ ventilator without mullion /transom. Using R1 series with frame (33 mm and above) x (35 mm and above). (Height upto 0.90 metre)

Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R4 series with frame (64 mm and above) x (55 mm and above) and sash (64 mm and above) x (100 mm and above) and French (False) mullion (64 mm and above) x (60 mm and above). (Height above 2.5 metre).

`Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows and other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.` Frame size 50 x 100 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

(A) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. (D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (E )Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 56 m Head

(A) Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Terrace Pump) (B) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. (C) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS : 325. (D) M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (E )Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm. Dia

Providing laying, testing and commissioning of `C` class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation and providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm. Dia Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25 mm dia.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 50 mm dia.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 200 mm dia (wall thickness 6.3 mm) .

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150mm dia.

`Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.`

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 65 mm dia.

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm dia.

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 200 mm dia.

Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. 30 m

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Stainless Steel (Grade 304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way-150 mm dia M.S. Pipe

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required..

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing angle iron (40mmx40mmx5mm) door frame and MS sheet (6mm thick) cum glass shutter of size 2.1mtrx0.9mtr(N.S.) with 25mmx25mmx3mm angle frame all around and stiffened in between i/c hinges, handle, locking arrangement, painting with approved synthetic enamel paint i/c sign writing on glass at internal hydrant including providing and fixing S.S. sheet 2mm thick on remaining portion above door to close opening i/c painting etc. as required. Glass shall be 6 mm thick.

Providing and fixing of 25mm dia. gunmetal air release valve with all fittings and forged ball valve on header complete as required and as per enclosed specification.

`Providing and fixing following size Pressure gauge (0-15 Kg/Cm2) complete with shut off valve duly calibrated before installation complete as required and as per enclosed specification. 150mm dia.`

Providing, fixing, testing and commissioning of MS air vessel tank of pump room fabricated from 6mm thick MS plate, 400 mm in diameter and 2.0 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required and conforming to IS 4736-1968. Recommended dia. : 450 mm Height of shell : 2000mm Working pressure : 7 Kg/Sq.cm Test Pressure : 10 Kg/Sq.cm

Supply, installation, testing and commissioning ISI marked (IS:15683) Fire Extinguisher, Carbon-di-oxide type capacity 4.5 Kg. Flat base including valve, discharge hose of not less than 10 mm dia, 1M long and complete in all respects including initial fill with CO2 gas conforming to IS:307-1966 and walll suspension braket as required as per specifications.

Supply, installation, testing and commissioning of 6kg ABC (Powder Type) Fire Extinguisher. Mild Steel Cylinders ISI marked fitted with pressure indicating gauge, internal tube, squeeze lever type valve fully charged with ABC 90 powder (Mono Ammonium Phosphate) pressured by Nitrogen complete in all respects including wall suspension bracket and conforming to IS:15683 as required as per specifications.

Providing and fixing stainless steel standard fireman`s axe with heavy insulated rubber handle tested to 20000 volts as per IS : 926 complete.

Providing and fixing fire brigade suction hose coupling (draw out connection) with nut for female coupling as per IS-902 complete with 150mm dia. Suction pipe and foot valve (to be connected to static tank) complete as required and as per enclosed specification.

Supply, Installation, testing and commissioning of skid mounted horizontal inline centrifugal pumping set with CI stage casing and SS-304 impellers with stainless steel SS-304 shaft with mechanical seal as per IEC standards and complete with base and frame on necessary RCC foundations as per requirement, as per instructions complete in all respect and each pump set and shall have following duty: Domestic water Transfer Pump to O.H Water Tank (Plant Room Capacity for Each Pump = 150 LPM Pump Head = 45 m No. of Pumps : 2 (1 Working plus 1 Stand by)

Filter Feed Pump (WTP Area): Capacity for Each Pump = 150 LPM Pump Head = 30 m No. of Pumps : 2 (1 Working plus 1 Stand by)

Providing , fixing and commissioning of vertical self supporting dual media pressure sand filter vessel (comprising of 600mm bed depth of graded sand gravel and 600mm bed depth of Anthracite/Activated Carbon Filter or as per approved shop drawing ) (fabricated from MS sheet 6 mm thick shell and 8 mm thick dish end with top and bottom flanged openings ) including pressure gauges at inlet and outlet,air vent with face piping (GI Class C),CI butterfly valves,drain valve ,initial charge of approved filter media and back wash arrangment with all accessories.Painting inside surface with food Grade FRP, outside surface with two coat of red oxide primer and two or more coat of synthetic enamel paint complete (Tested to 1.5 times of working pressure) WTP Area Discharge : 10000 LPH Filtration Rate : 20,500 Ltrs/m2/Hr. Suggested dia appx. : 1000 mm Working pressure : 4 kg/cm2. Test pressure : 6 kg/cm2.

Providing and fixing MS rubber lined/vertical, cylindrical self supporting open tank for salt mixing and brine saturation with air agitation arrangement comprising of SS air distributor laid at the bottom of tank, centrifugal TURBINE air blower complete in all respects of suitable capacity to agitate the required quantity of brine, piping interconnection between air blower and air distributor with nozzles for inlet, outlet, overflow and drain. Outside finished with high gloss enamel paint over two coats of zinc chromate primer complete including testing and commissioning. Net usable capacity of the tank excluding free board etc., should be at least 10 % more than actual capacity required. Suitable access stair/platform in MS construction shall be provided to enable the operator to reach the brine tank top and faciliate dumping of salt directly into the tank from the salt bags. Min. Usable capacity : 500 Ltrs. Min. Net capacity : 2000 Ltrs.

Supply, Installation, testing and commissioning of automatic Chemical Dosing System consisting of electronic dosing pump with all accessories, suitable to dose chemical solution upto 1 ppm dose (of Sodium Hypo-chloride solution) to a filtered water flow 80000 lph Maximum against a pressure of 50-60 psi.

Sump Pumps for Lifting Water from Drainage Sumps in Plant Room area: Supply, Installation, testing and commissioning of compact monoblock dry motor submersible pumps, C.I. casing for suitable rating with non-clog free flow open impelle The above pump sets must be supplied complete with following accessories. (a) Complete piping of 80 mm dia common delivery header and termination of outside nearest catch basin (b) Necessary cables from pump set to starter panel (position of panel is near by sump). -_ 1 Set (c) Electrical switch panel starter having all necessary accessories (d) Automatic built-up water level controller with necessary length of cable upto control/starter panel. (e) Arrangement of alternate switching mechanism for operational and standby pumps. (f) Arrangement of simultaneous start of both the pump at predetermined level with the indication of water level controller. For Pump Room Drainage Discharge : 200 LPM Head : 15 m(Complete set as above with 2 nos. pumps 1W plus 1S))

Providing, laying, testing and commissioning of `C` class heavy duty G.I. pipe conforming to IS 1239 including welding, fittings like elbows, tees, flanges, tapers, nuts, bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 65mm nominal bore

Providing and fixing 65mm dia Butterfly Valves, wafer end type class PN 1.6

Providing and fixing C.I double flanged 65mm dia horizontal/vertical type Non-return valve

Providing and fixing 65 mm nominal bore C.I. `Y` Strainer (screwed/ flanged) with stainless steel fine wire mesh.

Providing and fixing 25 mm dia gunmetal fitting for water level indicator gauge.

Supply, installation, testing and commissioning of Tanker inlet Connection.

Providing, fixing, testing, commissioning and handing over anti mosquito overflow grating 100 mm dia.

STP-CAPACITY 50 KLD. Design, Supplying, Installing, Testing and Commissioning of Sewage Treatment Plant capacity 50 KLD. The plant proposed shall be 50 kld with a main pump room. The plant is proposed to be installed in the basement accessible from the pump room itself for future maintenance. No opening shall be provided on main slab above for this purpose, for the following : Nature of effluent - Domestic Sewage from Toilet use and kitchen waste. Daily average out flow - 50 Cum / Day pH - 7.5 - 8.5 BOD5 - upto 250-350 Mg/L S. Solids - 250 - 400 Mg/L COD - upto 450-600 Mg/L Oil and Grease - 50 Mg / L Effluent discharge standard after treatment pH - 6.0 - 8.5 BOD5 - Less than 20 Mg/L S. Solids - Less than 10 Mg/L COD - Less than 50 Mg/L Oil and Grease - Less than 5 Mg/L Sewage treatment plant shall include the following items: Screen Chamber Sewage equalization tank/sump MBBR tank Settling tank Disinfection Chember Treated Water tank Sludge Holding Tank Filtration through MGF and ACF Air Blowers, Pumps and equipment Piping, valves etc Electrical Panel and Cabling Common plant room adjacent to STP. Softener as optional Soft water tank as optional All piping, valves and level indicator/controller etc. within plant room. Supply, installation, testing and commissioning of 2 Nos Stainless Steel Perforated Screen with suitable lifting arrangement (size 300 mm wide x 300 mm high approx)

Raw Sewage Lifting pump Supply, installation, testing and commissioning of non clogging type pumps, having CI casing and CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty. Submersible Sump Pumps (2 Nos. - 1 working and one standby) :Raw Sewage Lifting pump (Solid handling cap. 35 mm) Flow rate (each) = 4-5m3 / hr Head = 10 Mtr

Sewage Lifting Pump Supply, installation, testing and commissioning of non clogging type pumps, having CI casing and CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty. Submersible Sump Pumps (2 Nos. - 1 working and one standby) :Sewage Lifting Pump (Solid handling cap. 35 mm) Flow rate (each) = 4-5 m3 / hr Head = 10 Mtr

Drainade Sump Pump For Plant Room. Supply, installation, testing and commissioning of non clogging type pumps, having SS casing and CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty. Plant room sump pump 2 Nos (1 working plus 1 standby) Flow rate of each = 4 cum/hr Head = 10Mts (Solid handling size for this pump shall be 7 mm).

Sludge Transfer surface mounted Pumps Supply, installation, testing and commissioning of non clogging type pumps, having CI casing and CI impeller complete with all accessories, motor of required capacity. Delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically. Pump shall have following duty. Sludge Transfer surface mounted Pumps (2 Nos. - 1 working and one standby) :- (Solid handling cap. 7 mm) Flow rate (each) = 4 m3 / hr Head = 10 Mtr

Air diffusion system shall include the following: Twin type rotary air blowers One working and one standby) capable of delivering 30 cum/hr (each) of free air at 0.5 kg/cm2 driven through “V” belt or directly coupled through flexible coupling to a TEFCmotor of suitable HP Suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply(1W plus 1S)

Air piping shall comprise of pipes droppers/ laterals with M S (epoxy coated) Header complete with all fittings such as tees, crosses, plugs, sockets, elbows, reducers, supports and clamps, puddle flanges etc

Fine bubble diffusers For equalization tank -1 Nos. For sludge holding tank - 1 No. MBBR reactor tank- 1Nos. Air dispersion system shall be provided for Equalisation Tank, Sludge holding Tank and MBBR reactor Tank.

Providing and fixing all piping (as described below) and isolation control valves for making the system complete. PVC : Submerged air piping MS Epoxy : Air piping PVC piping : Pumped effluent and tank overflow pipe line

Bio deck MBBR Media Supply, installation, testing and commissioning of PVC Bio deck MBBR media to be installed in MBBR Tank (1No.) and PVC tube deck settling media to be installed in Secondary Settling Tank alonwith suitable sludge removal arrangement either by pumps or air lifting pumps.

Tube Settler Media: Instalation Testing and commissioning providing PVC tube deck media to be instaled in seconday setteling tank along with sutable sludge removal arrangment. PVC Tube Media

Supply, installation, testing and commissioning of Chlorine Dosing pumping systems Make : Asia LMI/E- Dose (1W plus 1S) Capacity : 0-6 LPH Tank : 100 Ltr HDPE

Supplying, installing, testing and commissioning of centrifugal filter feed water pumps SS Body, SS Impeller with mechanical seal along with motor. Pressure gauge with isolation cock, NRV, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply Capacity : 4M3/hr. Head : 30 M No. of Pumps (1 working plus 1 standby)

Supplying, installing, testing and commissioning of MS-EP vessel filter with frontal piping and associated valves and accessories. Filter shall be suitable for minimum working pressure of 2.5 kg / cm2 and shall include media, standard fittings like pressure. Multigrade pressure sand filter media Flow rate : 4cum/hr Filteration velocity : 15 cum/hr/sqm Filter Diameter : 900 mm. Oprating Pressure: 3.5 Kg/Sqm

Activated Carbon Filter Flow Rate : 4 cum/hr Filteration velocity : 15 cum/hr/sqm Filter Diameter : 900 mm

DIGESTED SLUDGE DISPOSAL PUMP: Providing and fixing horizontal, centrifugal sludge disposal pump for the disposal of sludge to tanker or to sludge dry beds. The pumps shall have CI casing, bronze impeller andSS shaft and sleeve with mechanical rotary shaft seal connected by a flexible tier type coupling to TEFC induction motor mounted on a common channel base-plate with coupling guard, 150 mm dia pressure gauge with GM isolation cock, suitable vibration eliminator pads of approved design .Motor to be suitable for including all necessary piping to feed filter press/ outlet upto ground level for feeding vehicle, valves and other accessories and concrete foundation complete as required. Capacity 3m3/hr @ 8 m head (1W plus 1S)

Filter Pres Supply, installation, testing and commissioning of Filter Press of plate size 12`x 12` x 11 plate with screw feed pumps for required capacity (1Working) with interconnecting piping and poly dosing system all complete.

Flow meter at treated water outlet.

Electrical cable and cable trays Supply instalation testing commisioning of electrical cable,cable trays and cable trenches , compleet with lugs, cableglands,conducting pipesand all other accessories,cabling shall be down from all the equipment to the master control panel compleet in all respect. GI Earting strip from all the eqiupment to the master control panel is also included.

Instrumentation / pressure gause/ Level switch

Flushing water Transfer Pump: Supplying, installing, testing and commissioning of centrifugal Treated water Transfer pumps SS Valut, SS Impeller with mechanical sea. Pressure gauge with isolation cock, NRV, Isolation valve on delivery line. Isolation valve, stainer at suction. The pump shall be suitable for 415 ± 10% volts, 3 phase, 50 cycles a/c supply Capacity : 9M3/hr. Head : 50 M No. of Pumps (1 working plus 1 standby)

Preliminary Works Detailed GA drawing, flow diagram, equipment list, power load requirement

Design, calculations of all elements of the plant, electrical and mechanical work to satisfy adequacy of design

Submission of Basic Civil Drawing for Flange Position.

Puddle Flange : Supply of flanges and Possitioning during RCC casting.

Water Softener ( location in Plumbing Plant room) Providing fixating, testing and commissioning of MS fabricated softening plant ( suitable for 3.5Kg/Sq cm working pressure) complete with initial charge with T-40 NA Resin, multiport / butter fly valve with built in ejector for controlling all operations, regeneration system, pressure gauge at inlet, outlet and back wash ( each with isolation cock), valves, fitting and water hardness testing kit and associated works. Softener shall be suitable for the following duty. Minimum expected rate of flow: 36000 lph Regeneration period 10 hrs. Total soft water to be produced between two regenerations: 288 Cu.m Expected raw water hardness : 550 ppm Expected treated water hardness: less than 50 ppm Max. working pressure : 4.0 Kg/cm2 Test pressure : 6 kg/cm2.

Supply, Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having 100% hermetically sealed inverter type Scroll Compressor(s) with and minimum two compressors along with two Condensing fan, above 14/18 HP modules, microprocessor based Controller, Side / top discharge type condensing unit(s), with R-410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The EER at 100% load with AHRI conditions shall not be less than 3.5 and Including OEM supplied Piping connection Kit etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. `Supply of QWIK FOOT supports system consisting of a G I Steel frame modular/multiples along with adjustable legs and UV Stabilised Nylon Rubber Crump- SBR recycled with feet assemblies 205/305 standrd Base. . The frame dimensions should be designed to take the weight with minimal deflection, manufactured from hot dip GI Carbon Steel. Rubber Crump in the base shall be resin bonded Polyurethane Polymer. Welding standard to be as per BS EN ISO 1461-2009 for Hot Dipped GI Assembly. The feet shall be 200/305/mm square made from Nylon 6 B601L 30% glass fibre filled Underneath Rubber for vibrations absorption.The leg assembly should be adjustable between 210 to max.350 mm for max loading per foot assemble to 500kg per foot frame and accommodate unevenness of the terrace floor levels. Make: Samsung / LG / Toshiba / OGeneral / Daikin ` 82 HP OUTDOOR UNIT (30 plus 30 plus 22)

Supply, Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having 100% hermetically sealed inverter type Scroll Compressor(s) with and minimum two compressors along with two Condensing fan, above 14/18 HP modules, microprocessor based Controller, Side / top discharge type condensing unit(s), with R-410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The EER at 100% load with AHRI conditions shall not be less than 3.5 and Including OEM supplied Piping connection Kit etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. `Supply of QWIK FOOT supports system consisting of a G I Steel frame modular/multiples along with adjustable legs and UV Stabilised Nylon Rubber Crump- SBR recycled with feet assemblies 205/305 standrd Base. . The frame dimensions should be designed to take the weight with minimal deflection, manufactured from hot dip GI Carbon Steel. Rubber Crump in the base shall be resin bonded Polyurethane Polymer. Welding standard to be as per BS EN ISO 1461-2009 for Hot Dipped GI Assembly. The feet shall be 200/305/mm square made from Nylon 6 B601L 30% glass fibre filled Underneath Rubber for vibrations absorption.The leg assembly should be adjustable between 210 to max.350 mm for max loading per foot assemble to 500kg per foot frame and accommodate unevenness of the terrace floor levels. Make: Samsung / LG / Toshiba / OGeneral / Daikin ` 64 HP OUTDOOR UNIT (32 plus 32)

Supply, Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having 100% hermetically sealed inverter type Scroll Compressor(s) with and minimum two compressors along with two Condensing fan, above 14/18 HP modules, microprocessor based Controller, Side / top discharge type condensing unit(s), with R-410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The EER at 100% load with AHRI conditions shall not be less than 3.5 and Including OEM supplied Piping connection Kit etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. `Supply of QWIK FOOT supports system consisting of a G I Steel frame modular/multiples along with adjustable legs and UV Stabilised Nylon Rubber Crump- SBR recycled with feet assemblies 205/305 standrd Base. . The frame dimensions should be designed to take the weight with minimal deflection, manufactured from hot dip GI Carbon Steel. Rubber Crump in the base shall be resin bonded Polyurethane Polymer. Welding standard to be as per BS EN ISO 1461-2009 for Hot Dipped GI Assembly. The feet shall be 200/305/mm square made from Nylon 6 B601L 30% glass fibre filled Underneath Rubber for vibrations absorption.The leg assembly should be adjustable between 210 to max.350 mm for max loading per foot assemble to 500kg per foot frame and accommodate unevenness of the terrace floor levels. Make: Samsung / LG / Toshiba / OGeneral / Daikin 40 HP OUTDOOR UNIT (20 plus 20)

Supply, Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having 100% hermetically sealed inverter type Scroll Compressor(s) with and minimum two compressors along with two Condensing fan, above 14/18 HP modules, microprocessor based Controller, Side / top discharge type condensing unit(s), with R-410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The EER at 100% load with AHRI conditions shall not be less than 3.5 and Including OEM supplied Piping connection Kit etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. `Supply of QWIK FOOT supports system consisting of a G I Steel frame modular/multiples along with adjustable legs and UV Stabilised Nylon Rubber Crump- SBR recycled with feet assemblies 205/305 standrd Base. . The frame dimensions should be designed to take the weight with minimal deflection, manufactured from hot dip GI Carbon Steel. Rubber Crump in the base shall be resin bonded Polyurethane Polymer. Welding standard to be as per BS EN ISO 1461-2009 for Hot Dipped GI Assembly. The feet shall be 200/305/mm square made from Nylon 6 B601L 30% glass fibre filled Underneath Rubber for vibrations absorption.The leg assembly should be adjustable between 210 to max.350 mm for max loading per foot assemble to 500kg per foot frame and accommodate unevenness of the terrace floor levels. Make: Samsung / LG / Toshiba / OGeneral / Daikin FOR TFA 16 HP OUTDOOR UNIT

Supply, Installation, Testing and Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having 100% hermetically sealed inverter type Scroll Compressor(s) with and minimum two compressors along with two Condensing fan, above 14/18 HP modules, microprocessor based Controller, Side / top discharge type condensing unit(s), with R-410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V plus /- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The EER at 100% load with AHRI conditions shall not be less than 3.5 and Including OEM supplied Piping connection Kit etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. `Supply of QWIK FOOT supports system consisting of a G I Steel frame modular/multiples along with adjustable legs and UV Stabilised Nylon Rubber Crump- SBR recycled with feet assemblies 205/305 standrd Base. . The frame dimensions should be designed to take the weight with minimal deflection, manufactured from hot dip GI Carbon Steel. Rubber Crump in the base shall be resin bonded Polyurethane Polymer. Welding standard to be as per BS EN ISO 1461-2009 for Hot Dipped GI Assembly. The feet shall be 200/305/mm square made from Nylon 6 B601L 30% glass fibre filled Underneath Rubber for vibrations absorption.The leg assembly should be adjustable between 210 to max.350 mm for max loading per foot assemble to 500kg per foot frame and accommodate unevenness of the terrace floor levels. Make: Samsung / LG / Toshiba / OGeneral / Daikin FOR TFA 34 HP OUTDOOR UNIT

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin GROUND FLOOR Cassette unit : 2.0 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin GROUND FLOOR Cassette unit : 2.6 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin GROUND FLOOR Cassette unit : 3.2 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin FISRT FLOOR Cassette unit : 1.6 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin FISRT FLOOR Cassette unit : 2.6 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin FISRT FLOOR Cassette unit : 3.2 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin SECOND FLOOR Cassette unit : 1.6 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin SECOND FLOOR Cassette unit : 2.0 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin SECOND FLOOR Cassette unit : 2.6 TR (947x947)

Supply, installation, testing and commissioning of following Minimum capacity of Round flow type cassette (Circular/Round Cassette) VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, etc., suitable for operation on single phase.230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush emitters with LED display The Needlepoint brushes shall be designed to properly release equal amount of positive and negative ions in the supply air,)400Million ions/cc without any obstruction. The units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The unit shall have capability to be switched on 24/7 and shall have weathertight conduit of minimum 6ft length.System should kill microorganisms and pathogens and backed with Independent lab test reports on the real virus and not surrogate. The system also should reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products should be UL 2998 listed. The systemshould be fitted with Air Quality monitor to measure AQI wherever required. The monitor sensors should be calibrated at least once a year. Make: Samsung / LG / Toshiba / OGeneral / Daikin SECOND FLOORCassette unit : 3.2 TR (947x947)

CASSETTE PANELS `Supply, Installation, Testing and Commissioning of decorative panels for cassette type indoor units. Make: Samsung / LG / Toshiba / OGeneral / Daikin`

TREATED FRESH AIR UNIT `Supply, Installation, Testing and Commissioning of factory built Floor Mounted / Ceiling Suspended with Mixing Box double skin VRF Based Treated fresh air unit capacity suitable to operate at 415 plus 10% volt, 50 Hz, 3 phase AC power supply as specified and shown in drawings complete with the followings: Plug fans with VFD , canvas connection - double skin type made of 25 mm thick panels consisting of preplasticized G.I. casing of thickness 0.6 mm outside layer and 0.6 mm thick plane G.I inside layer with polyurethane foam (PUF) insulation of density 40 plus 2 Kg/m3 factory injected between them by injection moulding machine.8 row deep cooling coil , section with aluminium finned copper tubes (tube thickness not less than 0.50mm), Pre filters with non wovensynthetic media down to 10 micron particle size with an efficiency of 90% with polarized media filter section(MERV15) ,space for fine Electrostatic filter air purification system that improves the indoor air quality through reducing harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens based on Electrostatic precipitation technology,It should be equivalent to MERV15 efficiency. with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply, complete with drain connections with drain valve, stainless steel drain pan, necessary vibration isolation and mounting arrangement. Note: all hanging support GRIPPLE / HIRA WALRAVEN guide line (SMACNA) Make : Zonex / VTS / Zeco / Flaktwood/Avante` 650 CFM and 4.0 TR capacity,Total static pressure 30 mm WG

TREATED FRESH AIR UNIT `Supply, Installation, Testing and Commissioning of factory built Floor Mounted / Ceiling Suspended with Mixing Box double skin VRF Based Treated fresh air unit capacity suitable to operate at 415 plus 10% volt, 50 Hz, 3 phase AC power supply as specified and shown in drawings complete with the followings: Plug fans with VFD , canvas connection - double skin type made of 25 mm thick panels consisting of preplasticized G.I. casing of thickness 0.6 mm outside layer and 0.6 mm thick plane G.I inside layer with polyurethane foam (PUF) insulation of density 40 plus 2 Kg/m3 factory injected between them by injection moulding machine.8 row deep cooling coil , section with aluminium finned copper tubes (tube thickness not less than 0.50mm), Pre filters with non wovensynthetic media down to 10 micron particle size with an efficiency of 90% with polarized media filter section(MERV15) ,space for fine Electrostatic filter air purification system that improves the indoor air quality through reducing harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens based on Electrostatic precipitation technology,It should be equivalent to MERV15 efficiency. with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply, complete with drain connections with drain valve, stainless steel drain pan, necessary vibration isolation and mounting arrangement. Note: all hanging support GRIPPLE / HIRA WALRAVEN guide line (SMACNA) Make : Zonex / VTS / Zeco / Flaktwood/Avante` 1000 CFM and 6.5 TR capacity,Total static pressure 30 mm WG

TREATED FRESH AIR UNIT `Supply, Installation, Testing and Commissioning of factory built Floor Mounted / Ceiling Suspended with Mixing Box double skin VRF Based Treated fresh air unit capacity suitable to operate at 415 plus 10% volt, 50 Hz, 3 phase AC power supply as specified and shown in drawings complete with the followings: Plug fans with VFD , canvas connection - double skin type made of 25 mm thick panels consisting of preplasticized G.I. casing of thickness 0.6 mm outside layer and 0.6 mm thick plane G.I inside layer with polyurethane foam (PUF) insulation of density 40 plus 2 Kg/m3 factory injected between them by injection moulding machine.8 row deep cooling coil , section with aluminium finned copper tubes (tube thickness not less than 0.50mm), Pre filters with non wovensynthetic media down to 10 micron particle size with an efficiency of 90% with polarized media filter section(MERV15) ,space for fine Electrostatic filter air purification system that improves the indoor air quality through reducing harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens based on Electrostatic precipitation technology,It should be equivalent to MERV15 efficiency. with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply, complete with drain connections with drain valve, stainless steel drain pan, necessary vibration isolation and mounting arrangement. Note: all hanging support GRIPPLE / HIRA WALRAVEN guide line (SMACNA) Make : Zonex / VTS / Zeco / Flaktwood/Avante` 1250 CFM and 10.0 TR capacity,Total static pressure 35 mm WG

TREATED FRESH AIR UNIT `Supply, Installation, Testing and Commissioning of factory built Floor Mounted / Ceiling Suspended with Mixing Box double skin VRF Based Treated fresh air unit capacity suitable to operate at 415 plus 10% volt, 50 Hz, 3 phase AC power supply as specified and shown in drawings complete with the followings: Plug fans with VFD , canvas connection - double skin type made of 25 mm thick panels consisting of preplasticized G.I. casing of thickness 0.6 mm outside layer and 0.6 mm thick plane G.I inside layer with polyurethane foam (PUF) insulation of density 40 plus 2 Kg/m3 factory injected between them by injection moulding machine.8 row deep cooling coil , section with aluminium finned copper tubes (tube thickness not less than 0.50mm), Pre filters with non wovensynthetic media down to 10 micron particle size with an efficiency of 90% with polarized media filter section(MERV15) ,space for fine Electrostatic filter air purification system that improves the indoor air quality through reducing harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens based on Electrostatic precipitation technology,It should be equivalent to MERV15 efficiency. with TEFC drive motor suitable for 415 ± 10% volts, 50 Hz, 3 phase, A.C supply, complete with drain connections with drain valve, stainless steel drain pan, necessary vibration isolation and mounting arrangement. Note: all hanging support GRIPPLE / HIRA WALRAVEN guide line (SMACNA) Make : Zonex / VTS / Zeco / Flaktwood/Avante` 4000 CFM and 26.0 TR capacity,Total static pressure 35 mm WG

CENTRALISED CONTROLLER `Supply, Installation, Testing and Commissioning of main Intelligent Touch Manager with plus adapter as per specifications to hook up indoor units as mentioned above. Controller shall however, be suitable for minimum 64 groups of indoor units.Centralised controller shall act as master controller for controlling of cooling mode of outdoor units and their associated indoor units. Controller shall be suitable of Remote Access with computer and shall have web access. Controller shall be suitable to autosequence the outdoor as well as indoor units catering to 24x7 operated areas as required/mentioned under sub head ``System Design`` of tender document. Controller shall be suitable to configured the inside temperature as per temperature set point on controller. Controller shall have time schedulling arrangement for Indoor Units as well as Outdoor Units. Controller shall be BMS Compatible and suitable for BMS integration. Quoted price shall be inclusive of all necessary cabling as required from ODU and IDUs to controller.`

UVGI SYSTEM (CEILING MOUNTED) Supply of UV-C Upper Air Disinfection system with option of Ceiling (surface) mounted and total power consumption of maximum 36W with UV lamp, which shall emit UV-C between the range of 250-254 nm. The system should have AL Extrusion Housing for Light Weight, Solid Construction – Built To Last, no corrosion, Perfectly Molded Polished AL Reflector For Highest Efficiency. The lamellae should be non reflective with black coating and aluminum back plate. The system shall be able to scatter the radiation in 360 degrees. System Outer dimensions (lxbxh) should not be more than 550X550X120 mm and weight not more than 10 kgs. Manufacturer must provide in vitro test report to mentioning the efficacy of product with a 99.99% reduction of collectable active pathogen in the air within 10 minutes of exposure .The avg value of irradiance at the center of vertical 1 m below the disinfection shall be )=7microwatt/cm2, Leakage shall be (0.2 microwatt/cm2. lifetime: 9000h - 90% UV-C @ end of life. Mechanical impact protection: IK02, ingress protection:IP20. optimal temperature range: 20°C to 40°C

SEWAGE TREATMENT PLANT - ODOUR CONTROL and MANAGEMENT SYSTEM Supply Installation Testing and Commisioning of Odor Control and Management System that shall consists of dry scrubbing media ultraSORB® chemical media contained in a linear and uniform medium density, UV stabilized polyethylene drum/HDPE/Aluminum with a blower mounted on top of lid having CFM Capacity of Suitable sizes. The OCMS shall contain required quantity of ultraSORB® 022 and ultraSORB® Blend chemical media.The OCMS shall be designed to operate at 99.5 plus % gas removal efficiencies. The configuration shall be arranged so that the contaminated air shall flow into the bottom inlet plenum and be drawn upwards/Horizontal through the media bed. Treated air shall discharge out the top/horizontal of the vessel through a centrifugal air ventilator or vice versa depending upon the site specifications. The OCMS shall have mist eliminator at the inlet.The drum material shall be linear, medium density, UV stabilized polyethylene, 5/16` (7.9 mm) in thickness/ FRP/Aluminum.The blower shall be sized to deliver required air flow that shall consist of a direct drive/belt drive motor-fan assembly with the motor 230/460 volt /3 phase/ 60 Hz Class, TEFC. The OCMS unit comes ready to be with field wired. The OCMS shall contain ultraSORB® 022 and ultraSORB® Blend chemical media. The ultraSORB® shall consist of manufactured, generally cylindrical porous pellets. The pellets shall be formed from a combination of coconut shell based activated carbon with chemicals to enhance the capacity for removal of odorous gases. The pellets shall also chemically react to produce solid reaction products within the media. Reactive Components shall be applied during pellet formation to insure uniform distribution throughout the entire pellet volume. Please refer to the techical specifications for complete compliance. Make: Ultrapure / GPS / Zonex / P.tech / Flaktwood For 50 KLD

WASHROOM ODOR CONTROL UNIT Supply, installation, testing and commissioning of wall mounted HygieneOX unit which is advance oxidation with nanoX and plasmOX based system. Advance oxidation plasma using unique wave-length photon special metal catalyst layer with the capability to generate Hydroxyl to eliminate contamination in the conditioned space. The system shall have an independent centrifugal fan and on/ off switch. The equipment shall be enclosed in PU coated material for durability and better aesthetics. The units should be designed after undertaking a load factor calculation for each specific area where the equipment is to be installed. The load shall clearly state the number of units required. The system shall be capable of eleminating bad odors, VoC`s as well as bacteria, virus, spores and particulates matter. Contaminated Air will be Sucked from one Side and Decontaminated Air will come out from other side. The equipment shall have to GreenPro,CE,ISO 13485,TUV,ROHS with 2014/35/EU Low voltage directive along with FDA compliance certifications. The system shall have a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from CCMB lab with a minimum efficiency of 99 percent against SARS Cov-2 within 45 minutes. certifications shall be submitted along with the technical submital. Make: Ultrapure / GPS / Zonex / P.tech / Flaktwood 251 to 300 Sqft

WASHROOM ODOR CONTROL UNIT Supply, installation, testing and commissioning of wall mounted HygieneOX unit which is advance oxidation with nanoX and plasmOX based system. Advance oxidation plasma using unique wave-length photon special metal catalyst layer with the capability to generate Hydroxyl to eliminate contamination in the conditioned space. The system shall have an independent centrifugal fan and on/ off switch. The equipment shall be enclosed in PU coated material for durability and better aesthetics. The units should be designed after undertaking a load factor calculation for each specific area where the equipment is to be installed. The load shall clearly state the number of units required. The system shall be capable of eleminating bad odors, VoC`s as well as bacteria, virus, spores and particulates matter. Contaminated Air will be Sucked from one Side and Decontaminated Air will come out from other side. The equipment shall have to GreenPro,CE,ISO 13485,TUV,ROHS with 2014/35/EU Low voltage directive along with FDA compliance certifications. The system shall have a microbiological testing report against Bacteriophage (MS-2 FDA) surrogate SARS Cov-2 with a minimum efficiency of 99 percent along with a Virology report from CCMB lab with a minimum efficiency of 99 percent against SARS Cov-2 within 45 minutes. certifications shall be submitted along with the technical submital. Make: Ultrapure / GPS / Zonex / P.tech / Flaktwood UPTO 250

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 41.1 mm O.D., wall thinkness = 1.4mm (insulation – 19 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 38 mm O.D., wall thinkness = 1.4mm (insulation – 19 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 34.9 mm O.D., wall thinkness = 1.4mm (insulation – 19 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.28.6 mm O.D., wall thinkness = 1.2mm (insulation – 19 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 25 mm O.D., wall thinkness = 1.2mm (insulation – 19 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 22.2 mm O.D., wall thinkness = 1.0mm (insulation – 19 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 19.1 mm O.D., wall thinkness = 1.0mm (insulation – 13 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 15.9 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 12.7 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 9.5 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick)

COPPER REFRIGERANT PIPING Supply, installation, testing and comissioning of interconnecting copper refrigerant piping of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink Mark Brand Printing on Hard Tubes should be present. duly insulated with tubular elastomeric nitrile rubber FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 including chase cutting andfilling with mortar, Slotted channel supports mounted on 10 mm threaded rod at suitable spacing the exposed piping shall be wrapped with glass woven cloth and lag coating for vapour barrier and weather protection. Joints shall be covered with nitrile rubber tape of 3 mm thick complete as required of following sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 6.4 mm O.D., wall thinkness = 0.8mm (insulation – 13 mm thick)

FITTINGS Supply, Installation,Testing and Commissioning of following imported copper fittings to be provided in refrigerant pipe line. Refnet Joints (Y- Joints)

FITTINGS Supply, Installation,Testing and Commissioning of following imported copper fittings to be provided in refrigerant pipe line. Refnet Headers

CONDENSATE DRAIN PIPING -cPVC Providing and Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 and 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing and plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 50mm dia

CONDENSATE DRAIN PIPING -cPVC Providing and Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 and 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing and plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 40mm dia

CONDENSATE DRAIN PIPING -cPVC Providing and Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 and 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing and plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 32mm dia

CONDENSATE DRAIN PIPING -cPVC Providing and Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 and 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing and plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. 25mm dia

HVLS (HIGH VOLUME LOW SPEED) FANS `Supplying, installation, testing and commissioning of HVLS Fan with High efficient Aerodynamically shaped 6 Number Blades, German brand Nord or Lentz parallel shaft gear reducer, IE2 High efficiency Motor Suitable for 400V,3PH,50Hz AC Supply. Fan shall be supplied with Variable frequency lean control system, Safety cables and Downrod. Make: Blowtech / Kruger / Elta / Greenheck` `Fan diameter: 3.6 meter (12 feet), Power: 0.765 KW`

INLINE FANS Supply , installation , testing and commissoning , of duct mounted circular / rectangular inline fans complete with direct driven centrifugal fan , TEFC squirrel cage induction motor , with efficiency class IE-3 , direct drive arrangement , heavy gauge sheet metal casing , rubber isolator mounts and other accessories.The fan shall be complete in all respect and should match the specification ,Drawings and Schedule. Inline fans shall be of following capacities. Make: Blowtech / Kruger / Elta / Greenheck 350 CFM,Total static pressure of 15 mm WG

INLINE FANS Supply , installation , testing and commissoning , of duct mounted circular / rectangular inline fans complete with direct driven centrifugal fan , TEFC squirrel cage induction motor , with efficiency class IE-3 , direct drive arrangement , heavy gauge sheet metal casing , rubber isolator mounts and other accessories.The fan shall be complete in all respect and should match the specification ,Drawings and Schedule. Inline fans shall be of following capacities. Make: Blowtech / Kruger / Elta / Greenheck 500 CFM,Total static pressure of 15 mm WG

GSS DUCT (FACTORY FABRICATED) Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply and return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description. 24 G (0.60 mm)

GSS DUCT (FACTORY FABRICATED) Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply and return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description. 22 G (0.80 mm)

GSS DUCT (FACTORY FABRICATED) Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply and return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description. 20G (1.00 mm)

GSS DUCT (FACTORY FABRICATED) Supply, fabrication, installation, testing and commissioning of GSS sheet metal ducting for supply and return air with all the accessories and hanging arrangement. It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting . Refer tender specification for detail description. 18G (1.25 mm)

GSS DUCT (SITE FABRICATED) Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply and return air with all the accessories and hanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting.Refer tender specification for detail description. 24 G (0.60 mm)

GSS DUCT (SITE FABRICATED) Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply and return air with all the accessories and hanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting.Refer tender specification for detail description. 22 G (0.80 mm)

GSS DUCT (SITE FABRICATED) Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply and return air with all the accessories and hanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting.Refer tender specification for detail description. 20 G (1.00 mm)

GSS DUCT (SITE FABRICATED) Supply, fabrication, installation, testing and commissioning of G.S.S. sheet metal ducting for supply and return air with all the accessories and hanging arrangement.It shall include bends,elbow,tees,spliter,fittings,gaskets and all accessories for complete installation of ducting.Refer tender specification for detail description. 18 G (1.25 mm)

VOLUME CONTROL DAMPER Supplying, installing, testing and commissioning of GI volume control damper with minimum 1.6 mm flange and 1.8 mm blade thickness within ducts to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per schedules and drawings.

EXHAUST AIR GRILL Supplying, Installing, testing and commissioning of powder coated extruded aluminium exhaust air grille with min.60 % free area, with metallic frame work and fixing accessories, to be fixed on external wall to exhaust air from basement area to ambient , it shall be suitable for exhausting required air in CFM . Louvers need to be suitable in order avoid rain water entry in to basement @ 15 degree deflection with bird screen complete as per specification approved drawings and schedules.

FRESH AIR GRILL Supplying, installing, testing and commissioning of GI construction fresh air louvers with min. 60 % free area, bird screen and painted in baked enamel shade as per clients or architect approval with metallic frame work complete as per specification approved drawings and schedules.

FRESH/EXHAUST AIR LOUVER Supplying, installing, testing and commissioning of GI construction fresh/exhaust air louvers with min. 60 % free area, bird screen and painted in baked enamel shade as per clients or architect approval with metallic frame work complete as per specification approved drawings and schedules.

FLEXIBLE DUCTING Supply, Installation, Testing and Commissioning of factory made pre - insulated with 25mm thick glass wool having minimum density of 16 kg/cum. Flexible ducts shall have inner as well as outer skin constructed out of aluminium sheets. Duct shall be of following sizes: 100 mm dia

FLEXIBLE DUCTING Supply, Installation, Testing and Commissioning of factory made pre - insulated with 25mm thick glass wool having minimum density of 16 kg/cum. Flexible ducts shall have inner as well as outer skin constructed out of aluminium sheets. Duct shall be of following sizes: 150 mm dia

DUCT ACOUSTIC LINING Supply and fixing of acoustic lining of ducts with chemically cross link Oxide accetate foam open cell structure Acoustic Insulation with density 30 Kg / Sqm, UV protected and Class O Fire propperty Water Vapour absorption 0.002 gm / Sqcm, including cost of adhesive etc. complete in all respect. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work. Make: Armacell / Vidoflex / Eurobatex 15 mm thick

DUCT INSULATION Supply and fixing of external thermal closed-cell Nitrile rubber Insulation material FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 in form of sheet on duct including cost of adhesive (CPRX Compound) complete as required. All as per pre approved by Engineer in charge. 19 mm on Supply/Return duct

DUCT INSULATION Supply and fixing of external thermal closed-cell Nitrile rubber Insulation material FM/UL approved with high water vapor diffusion resistance and low thermal conductivity should be certified `Class O` in Fire Propagation as per BS 476 Part 6 in form of sheet on duct including cost of adhesive (CPRX Compound) complete as required. All as per pre approved by Engineer in charge. 25 mm on Supply/Return duct

DOUBLE LAYER CANVAS CONNECTION P and F of Fire retardent flexible canvass connection made of fibreglass weave having silver grey silicon rubber coating, of height 200 mm with sufficient fold to avoid transmission of vibration with GI frame ,Gasket Nut Bolts for air cooling Plants/AHU/FCU etc as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work.

LAG COATING FOR DUCT INSULATION `The duct in internal areas shall be insulated as specified and the insulated duct shall be coated by Fevicol AC Duct King Lag coating for protection against Mechanical damage, Fungal growth, Flame spread, Water Permeance. The coating shall confirm UL723 for surface burning characteristics. The coating should comply the complete specification. Make: Aerolam/Thermobrake/Trocellene ` 19 mm on Supply/Return duct

WEATHER PROTECT COATING FOR DUCT INSULATION The duct in exposed area shall be insulated as specified and the insulated duct shall be coated with Fevicol Weather Protekt Coat for protection against Mechanical damage, Water Permeance Fungal growth, Flame spread, and Weathering Reistance. The product should comply complete specification. Make: Aerolam/Thermobrake/Trocellene 19 mm on Supply/Return duct

LAG COATING COPPER PIPE `The duct in internal areas shall be insulated as specified and the insulated duct shall be coated by Fevicol AC Duct King Lag coating for protection against Mechanical damage, Fungal growth, Flame spread, Water Permeance. The coating shall confirm UL723 for surface burning characteristics. The coating should comply the complete specification. Make: Aerolam/Thermobrake/Trocellene` ALL INTERNAL COPPER REFRIGERANT PIPING

WEATHER PROTECT COATING FOR COPPER PIPE The duct in exposed area shall be insulated as specified and the insulated duct shall be coated with Fevicol Weather Protekt Coat for protection against Mechanical damage, Water Permeance Fungal growth, Flame spread, and Weathering Reistance. The product should comply complete specification. Make: Aerolam/Thermobrake/Trocellene EXPOSE COPPER REFRIGERANT PIPING

ANTICORROSIVE TREATMNENT FOR FINS AND COPPER TUBES Applying anticorrosive treatment for Fins and copper tubes of Air Cooled Condenser alongwith copper tubing / piping with all joints and U-Bends exposed to coastal areas corrosive atmosphere / aggressive ambient, shall be painted with special corrosion prevention coating at site as directed by engineer incharge.

UNDERDECK THERMAL INSULATION Supply and fixing of UL approved Physically / Chemically 25mm Thik crosslinked polyethylene foam,with factory reinforced alupet foil facing, having Class O fire properties and very low fire propagation of ( 5.5, passing E-84 at ( 25/50,the density of the foam should be not less than 25-30kg/m3 and the maximum thermal conductivity K should be 0.032W/mK @23 Deg C , the permeability resistance factor u shouldn`t be less than 14000. Make: Aerolam/Thermobrake/Trocellene

PRECISION AIR CONDITIONING (for Server Room) Supply, Installation testing and commisioning of micro processor based DX Precision air conditioning system with Variable Capacity digital / inverter Scroll compressor suitable for R410a refrigerant with Internal Pressure Relief Valve for protection of the units.( Variable compressor should be able to modulate from 10% to 100% in stepless manner ), each unit comprising of outdoor and Large Frame-Floor Discharge , Top suction, - Evaporator coil with Hydrophilic coating and high Delta, Sound level not to exceed 68 dBA @ 2 Meter . Condenser construction should be of aluminum special grade material for long life, better reliability and low floor loading . Condenser noise level should not exceed beyond 56dBA @ 5 meter. Fan speed controller should be part of every unit and should be suitable for high ambient of 45°C and cold aisle temp of 20 plus 2°C, 50% plus 5%RH. Indoor unit shall consist of filter section, Electrical Power switch board, multi-rows deep copper cooling coil with aluminium fins, Dehumidification through electronic expansion valve, modular panel cabinet construction, cabinet insulation, fan section with dynamically balanced centrifugal Fiberglass corrosion resistant EC Fans with 630 mm Dia , Infrared/ultasonic humidifier package, Crank case heater etc. Return Air Set points and Operational Capabilities:20 Deg.C to 35 Deg C, 20% to 60% RH, 38 Deg C in case of Cold Aisle containment and Smart logics,P / PI / PID - All three Control logics for temperature control,Team Mode operation for synchronizing upto 32 units in room by any of the unit controller,inbuilt Sequencing and Stand-by rotation,Auto restart after a power failure,Monitoring card should be able to support any one of the protocol (Bacnet/Modbus/SNMP). The unit shall be suitable for 380-415 Volts / 50HZ /3 Phase supply. The units inclusive of interconnected insulated refrigerant piping, control cabling, insulated drain piping (up to 10 mtr length), humidifier inlet water piping, vibration isolation pads and associated electrical power cabling and MS base frame duly painted with black enamel paint for mounting of condensing units and suitable vibration isolation pads etc. The price including the refrigrent piping with insulation, cladding and control cable up to 10 Rmt. 10.5 TR Actual Capacity Floor Discharge Type PAC Unit. (5 working plus 2 Stand by) Supply, installation, testing and commissioning of extruded Aluminium Powder coated supply air floor grills of Heavy gauge high quality extruded Aluminium profile with aluminium blade, VCD`s, suitable for mounting in false floor of of required sizes. Supply and fixing of 19 mm thick Closed Cell Nitrile Rubber Insulation for server room floor. Supply, installation, testing and commissioning of of Refrigerant piping circuit (liquid and Gas) with 19 mm thick close cell nitrile rubber tubular insulation and with outer mechanical protection of 26 G thick aluminum cladding as per specifications for precision air conditioning( for length exceeding 10 mtr) Supply, installation, testing and commissioning of of control cables for precision air conditioning (exceeding 10 mtr length) :

Bidder Name

Amount

Shiv Construction Company (GSTN-06AAIFS8100PIZU) BID ID -1144493

Shiv Darshan Associates (GSTN-06ANNPP7312G1ZV) BID ID -1145905

Krishna Construction Co (GSTN-06AALFK6441Q1ZP) BID ID -1146648

SKG INFRATECH PRIVATE LIMITED (GSTN-NA) BID ID -1146403

SKG INFRATECH PRIVATE LIMITED (BID ID -1146403)

Shiv Construction Company (BID ID -1144493)

Krishna Construction Co (BID ID -1146648)

SKG INFRATECH PRIVATE LIMITED (BID ID -1146403)

Shiv Darshan Associates (BID ID -1145905)

Krishna Construction Co (BID ID -1146648)