Widening and Strengthening work on Meerut Bulandshahr Road (Hapur City Portion) (ODR) during 2023-24 in district Hapur

Amount

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required and utilising the remaining earth locally for road as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of table 300-2. as per MORTH specification as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Provinding, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Providing and applying tackcoat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.25 kg. per sqm. On the prepared bituminous surface cleaned with mechanical broom as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Providing and applying tackcoat with bitumen VG-10 using Bitumen pressure distributor at the rate of 0.20 kg. per sqm. On the prepared bituminous surface cleaned with mechanical broom as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Provinding and laying dense graded bituminous macadam with higher capacity batch type HMP using cdrushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.0 % by weight of total mix and filler transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required grade, level and aligment,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 505 as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Provinding and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with Bitumen VG-30 bituminous binder @ 5.4% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment ,rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Providing and Laying of I shaped grey colour Interlocking tiles rubber moulded 80mm thick precast cement concrete having plan dimension 200 x (160+120mm) with compressive strength not be less than 40 Mpa (M-40) and weight 5kg per no. specification to IS:15658-2006 as per drawings and Technical Specification Clause 1504 as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Plain Cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

RCC Grade M 20 using batching plant transit mixer & manual placing RCC work in Grade M 20 in Open Foundation & Sub Structure with cement approved coarse sand & two cm gauge well graded grit including necessary shuttering placing & binding of reinforcement including its binding with wire but excluding cost of reinforcement & also including supply of all material , labour , T & P etc.required for completion of work. As per Case II MORTH specification 1500, 1700 & 2100. SN.12.80 as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications of MORTH as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

M.S. or Iron work of M.S.Grill & stair case railing etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. SI.No. 502 (A) as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion single socketed pipe. SI.No. 19.02 New Item as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Providing wall putty on new surface with approved quality material of Berger/ J.K./ Birla or similar make 2 coats SI.No. 15.26 New Item as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Painting Two Coats on New Concrete Surfaces after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces as per MORTH specification item no. 8.08 & 803 as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc as per MORTH specification as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST. (a) 5th Kilometre Stone (Precast)

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position including painting and printing etc as per MORTH specification as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.(b) Ordinary Kilometre Stone (Precast)

Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8, fixing in position as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.(c) Hectometre Stone (Precast)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes as per MORTH specification as per dirction of Engineer-in-charge inclusive of all material, labour, T&P etc. labour cess, royalty and all taxes required of proper comletion of work but excluding the cost of GST.

M/s Hanu Infrastructure Pvt Ltd

Ashok Kumar Chhabra Constructions Pvt.Ltd.