Providing Park at TNHB Colony in Ward No.60 , East Zone

Cleaning The jungle etc. complete as per direction of officers

Supplying and Fixing of barbed wire fencing using stone size of 0.15x0.15 to an of 2.10m below 0.60m and above 1.80 with necessary

Reinforced cement Concrete 1:2:4 mix using 20mm HBG Jelly for 10m3 including vibrator charges (RCC works) (CBE DATA 25-26 P-6 ITEM - 18)

Earth work Excavation in all soils with initial lead and lift etc., complete (CBE DATA 25-26

Cement Concrete Broken Stone in Cement mortar 1:4:8 mix using 40mm metal granite stone including all charges etc., complete. (CBE DATA 25-26 P-4 ITEM - 9)

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed

Cement Concrete Broken Stone in 1:2:4 mix using 20mm Hard granite baby jelly (plain concrete) (CBE DATA 25-26 P-4 ITEM - 12)

Brick work in cement mortar 1:5 mix (one cement five sand) using II class table molded bricks chamber burnt bricks of size 9" X 4 1/2" X 3" for the following including curing etc., completed

Supplying and fixing of design grill main gate . including cost and conveyance of all labour and material charges ..etc. complete (CBE DATA 25

Plastering in Cement Mortar 1:5 mix 12mm thick etc., complete. (CBE DATA 25-26 P-9 ITEM - 32)

Painting TWO COATS over the Base coat with best and approved quality of EMULSION PAINT over the plaster surface including cost of paint and other materials, brushes,scaffolding charges etcm, complete complying with standard specifications (CBE DATA 25-26 P-12 ITEM

Painting with enamel paint two coats for new iron works over a base coat etc complete (CBE DATA 25-26 P-12 ITEM - 63)

Supplying and Laying Rubber Moulded Hydraulic Pressed Paver Block Providing and laying of 83 mm thick high strength of Hydraulic Pressed Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion 0 below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers] sweeping transporting loading unloading of laying paver block as per the standard s+ -cifications CBE DATA 25-26 P-11

S/fixing of swing two seater with bit of 8'-0" above GL using 50mm dia ms pipe 9swg with | 3.65mm on wall thick with one coat of primer and to coats of enamel paint and seat using with paddale wood with polishing

S/fixing of slide ladder park model using 16g MS sheet for sliding 8'-0" support pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick ladder using - 25mm L angle for sliding support hand rails using 25mm sq.rod and platform frame using 40mm L angle with one coat of primer and two coat of enamel paintinf etc

S/Fixing of Jungle Jin Pipe 40 mm dia MS Pipes 10 SWG 3.25 mm wall thick runing three horzontally and vertically on each side finishing one coat of primer and two coat of enamel paint of approved colour aas per instruction of dept officers

S/F of twin sea saw seater of 6'-0" Length and 4-0" Height using 50 mm GI Pipe with two Coats of enamel paint over one coat of primer and platform using 1" Paddale wood with polish as per direction of dept officers

Supply and fixing of merry-Go-Round using M.S pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250 mm. The merry go round of 6 seat approved by the Executive engineer before use on work

Supply and fixing of Park benches including moulding charges etc complete