Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹2.4 L
Closing Date
10 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
WORK 3
14 conditions · 3 needing a document upload
As a proof of sufficient financial capacity:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-D, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed as defined in 1.1 during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works costing not less than the amount equal to 40% of advertised value of the tender, or One similar work costing not less than the amount equal to 60% of advertised value of the tender. (Credential from private individuals for whom such works are executed/being executed should not be accepted).{Authentic copy of the documents should be uploaded by the tenderer(s) along with their offer to fulfill the eligibility criteria otherwise their offers will not be considered and summarily rejected}.
Building/structure or Bridge work or Supply of building materials
48 conditions · 6 needing a document upload
(A) The stamp duty payable in Bank Guarantee for Bid Security and Performance guarantee differs from state/Union of Territory to state/Union of Territory as per the provisions of stamp Duty Act applicable in that particular state/Union of Territory on the date of execution of Bank Guarantee. The value of Non-Judicial Stamp paper for execution of the BG to be submitted shall be higher of the following two values:- (a) Stamp value as applicable in state/Union Territory from where Stamp paper is purchased. (b) Stamp value as applicable in the state of Uttar Pradesh. Stamp Duty applicable in the state of Uttar Pradesh for submission of Bank Guarantee for Bid Security and Performance Guarantee is Rs. Five per thousand or part thereof, subjected to maximum value of Rs. Ten Thousand (Rs. 10,000/-). (B) Bid offer of tenderer who submits Bank Guarantee in lieu of Bid security in violation of Para (A) above will be summarily rejected.
Audited Balance Sheet duly certified by the Chartered Accountant regarding contractual payments received in the past.
Please submit your bank details i.e.Name of the Bank along with Bank Branch Code, Account Number, IFSC Code, and PAN Number.
Please furnish list of plant and Machinery available on hand own and proposed to be inducted own and hired to be given separately for the subject work.
Please furnish list of Works on hand indicating Description of Work, Contract Value, Approximate value of balance work yet to be done and Date of award.
Certificates and testimonials regarding contracting experience for the type of job for which tender is invited with list of works carried out in the past giving Description of Work, Organization for whom executed, approximate value of contract at time of award, Date of award and Date of Completion. Date of actual Start, Actual Completion and Final value of Contract shall also be given.
Please furnish list of personal, organization available on hand and proposed to be engaged for the subject work.
At the time of submission of bid, if you have any special Condition then upload in scanned pdf copy.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
POA :- Regarding Power of Attorney, the conditions as per General Manager/Law/Gorakhpur's letter No. C/78/LO/Misc/HO/2024 dated 05.08.2024 attached herewith shall be applicable.
The earnest money deposited with the tender of successful tenderer will be retained as part of security deposit which will be 5 percent of the value of work awarded. The balance amount of security deposit will recovered on account bills of the work @ 6 percent till it reaches upto 5 percent of the value including earnest money.
For enactment of this Act, the tenderer shall be required to pay cess 1 of cost of construction work to be deducted from each bill. Cost of material shall be outside the purview of cess, when supplied under a separate schedule item Railway Boards No. 2008/ CE-1 CT/6 Dt. 09-07-2008
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
For those conditions for which standard formats have been given in the uploaded document titled-Formats for uploading of various format. The informations should only be submitted in these standard formats.
In addition to General condition of contract 2022 and Indian Railways Unified standard specification Works Materials Volume I II 2010, revised upto date, special condition attached shall also apply.
Sales tax/Business tax will be recovered as per extant instruction on the subject.
The successful tenderer will have to submit full security deposit as per GCC-2022 before execution of the agreement.
a) The successful bidder shall have to submit a Performance Guarantee (PG) within 21 (Twenty one) days from the date of issue of Letter of Acceptance (LOA). Extension of time for submission of PG beyond 21 (Twenty one) days and upto 60 days from the date of issue of LOA may be given by the Authority who is competent to sign the contract agreement. However, a penal interest of 12% per annum shall be charged for the delay beyond 21(Twenty one) days, i.e. from 22nd day after the date of issue of LOA. Further, if the 60th day happens to be a declared holiday in the concerned office of the Railway, submission of PG can be accepted on the next working day. In all other cases, if the Contractor fails to submit the requisite PG even after 60 days from the date of issue of LOA, the contract is liable to be terminated. In case contract is terminated railway shall be entitled to forfeit Earnest Money Deposit and other dues payable against that contract. In case a tenderer has not submitted Earnest Money Deposit on the strength of their registration as a Startup recognized by Department of Industrial Policy and Promotion (DIPP) under Ministry of Commerce and Industry, DIPP shall be informed to this effect. The failed Contractor shall be debarred from participating in re-tender for that work.
b) The successful bidder shall submit the Performance Guarantee PG in any of the following forms, amounting to 5 percent of the contract value: i A deposit of Cash ii Irrevocable Bank Guarantee iii Government Securities including State Loan Bonds at 5 percent below the market value i v Deposit Receipts, Pay Orders, Demand Drafts and Guarantee Bonds. These forms of Performance Guarantee could be either of the State Bank of India or of any of the Nationalized Banks v Guarantee Bonds executed or Deposits Receipts tendered by all Scheduled Banks v i A Deposit in the Post Office Saving Bank vii A Deposit in the National Savings Certificates viii Twelve years National Defence Certificates ix Ten years Defence Deposits x National Defence Bonds and xi Unit Trust Certificates at 5 percent below market value or at the face value whichever is less. Also, FDR in favour of FA & CAO/N. E. Railway free from any encumbrance may be accepted.
(1)Price Variation Clause (PVC) shall be applicable only in tender having advertised value above Rs.2 Crores. Provided further that, in a contract where PVC is applicable, following shall be outside the purview of price adjustments (i.e. shall be excluded from the gross value of the work for the purpose of price variation) : (a) Materials supplied by Railway to the Contractors, either free or at fixed rate; (b) Any extra item(s) included in subsequent variation falling outside the purview of the Bill(s) of Quantities of tender, under clause 39. (1)(b) of these Standard General Conditions, unless applicability of PVC and 'Base Month' has been specially agreed, while fixing the rates of such extra item(s).(2) Price Variation Clause for Annual Maintenance Contract or Zonal Contract :- The price variation Clause of General Conditions of Contract shall not apply to a works contract which is either an Annual Maintenance Contract or a Zonal Contract as per Railway Boards letter No. 2013/CE/I/CT/O/10-PVC-Pt.I dated 27.01.2015 & 2017/Trans/01/Policy dated 08.02.2018.(3) Price Variation Clause shall be applicable accordingly attached document.
Bank Guarantees BGs to be submitted by suppliers/contractors should be sent directly to the Divisional Railway Manager/Engineering, N.E. Railway, Ashok Marg, Lucknow- 226001 by issuing Bank under registered Post A.D.
1- The B.G. Bonds submitted by contractors/bidders should be issued via SFMS. 2- The online verification of such B.G. Bonds is carried out through the AIMS portal. 3- No B.G. Bond is accepted unless it is verifiable through the SFMS system.
(1) Earnest Money Cost: -All the tenderers/Contractors have to deposit full earnest money as stipulated in the tender document through online modes as permitted in IREPS application. (2) Tender Document Cost: -All the tenderers/Contractors have to deposit tender document cost as stipulated in the tender document through online modes as permitted in IREPS application.
a- One qualified Graduate Engineer where the cost of the work to be executed is Rs.200 lakh and above. b- One qualified Diploma Holder Engineer where the cost of the work to be executed is more then Rs.25 lakh, but less then Rs.200 lakh. Technical staff should be available at site whenever required by the Engineer-in-charge to take instructions. In case the contractor fails to employ the qualified Engineer, he shall be liable to pay amount of Rs.40000 and Rs.25000 for each month or part thereof for the default period for the provisions, as contained in para a and b above respectively. The decision of the Engineer-incharge as to the period for which the required technical staff was not employed by the contractor and as to the reasonableness of the amount to be deducted on this account shall be final and binding on the contractor.
Care in Submission of Tenders :
Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer.
Tenderers will examine the various provisions of the Central Goods and Services Tax Act, 2017(CGST)/Integrated Goods and Services Tax Act, 2017(IGST)/Union Territory Goods and Services Tax Act, 2017(UTGST)/respective states State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt. and as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under CGST/IGST/ UTGST/SGST/ Act shall submit GSTIN along with other details required under CGST/IGST/UTGST/SGST Act to railway immediately after the award of contract, without which no payment shall be released to the contractor. The contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
All documents related to Constitution of Firm by the Partnership Firm/ Joint venture/ Society/Companies/ MOU etc. duly notorized should be uploaded at the time of submission of bid.
The tenderer shall upload scanned copies of mandatory credentials such as experience certificates (Except Private Individual), turn over Certificates and any other documents as applicable.
Goods & Service Tax (GST) will be recovered as per extant instruction on the subject.
NER-LJN Division:- GD:- Major repairs of Staff quarters in Semra Railway colony at Gonda.
NER-LJN-2026-34
NER-LJN-2026-34
Open
Works - General
12 Months
Lucknow, Uttar Pradesh
₹0
₹2.4 L
10 Mar 2026
16 Feb 2026
24 Feb 2026
69 items across 1 schedule · ₹1,88,26,927.7 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | All kinds of soil. | cum | 130 | 286.85 | 37,290.5 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 87 | 253.95 | 22,093.65 |
| 3 | All kinds of soil | cum | 52 | 104.5 | 5,434 |
| 4 | cum | 217 | 10,719.3 | 23,26,088.1 | |
| 5 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 520 | 766.55 | 3,98,606 |
| 6 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 520 | 608.35 | 3,16,342 |
| 7 | Hot rolled deformed bars | Kg | 28167 | 89.65 | 25,25,171.55 |
| 8 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). | Sqm | 3250 | 253.05 | 8,22,412.5 |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 87 | 6,658.25 | 5,79,267.75 |
| 10 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 152 | 8,288.35 | 12,59,829.2 |
| 11 | cement mortar 1:4 (1 cement : 4 coarse sand) | Sqm | 43 | 837.85 | 36,027.55 |
| 12 | Cement mortar 1:4 (1 cement :4 coarse sand) | Sqm | 43 | 1,018.05 | 43,776.15 |
| 13 | Area of slab upto 0.50 sqm | Sqm | 87 | 4,679.35 | 4,07,103.45 |
| 14 | Area of slab over 0.50 sqm | Sqm | 87 | 4,425.35 | 3,85,005.45 |
| 15 | Granite work | Metre | 195 | 418.85 | 81,675.75 |
| 16 | Each | 43 | 808.15 | 34,750.45 | |
| 17 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | Sqm | 650 | 1,063.45 | 6,91,242.5 |
| 18 | Sal wood | cum | 3 | 1,06,720.85 | 3,20,162.55 |
| 19 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | Sqm | 9 | 2,818.5 | 25,366.5 |
| 20 | On one side only | Sqm | 9 | 408.05 | 3,672.45 |
| 21 | Fixed to steel windows by welding | Kg | 867 | 181 | 1,56,927 |
| 22 | Fixed to openings /wooden frames with rawl plugs screws etc. | Kg | 867 | 197.7 | 1,71,405.9 |
| 23 | With 2nd class teak wood beading 62X19 mm | Sqm | 217 | 1,164.9 | 2,52,783.3 |
| 24 | 100x85x5.5 mm (heavy type) | Each | 217 | 175.7 | 38,126.9 |
| 25 | 200x10 mm | Each | 217 | 300.55 | 65,219.35 |
| 26 | 125 mm | Each | 217 | 205.1 | 44,506.7 |
| 27 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | Each | 347 | 1,025.65 | 3,55,900.55 |
| 28 | Non decorative finish | Sqm | 87 | 3,060.6 | 2,66,272.2 |
| 29 | Welding by gas or electric plant including transportation of plant at site etc. complete. | cm | 2167 | 3.4 | 7,367.8 |
| 30 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 3250 | 142.3 | 4,62,475 |
| 31 | Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with local sand, with common burnt clay non modular bricks. | Sqm | 325 | 733.3 | 2,38,322.5 |
| 32 | 40 mm thick with 20 mm nominal size stone aggregate | Sqm | 347 | 545 | 1,89,115 |
| 33 | Size of Tile 600x600 mm | Sqm | 520 | 1,416.65 | 7,36,658 |
| 34 | In 75x75 mm deep chase | Metre | 260 | 260.2 | 67,652 |
| 35 | 110 mm diameter | Metre | 43 | 319.75 | 13,749.25 |
| 36 | 110 mm bend | Each | 22 | 132 | 2,904 |
| 37 | 110 mm | Each | 43 | 309.5 | 13,308.5 |
| 38 | 1:6 (1 cement: 6 fine sand) | Sqm | 1950 | 282 | 5,49,900 |
| 39 | Lettering with black Japan paint of approved brand and manufacture | per letter per cm height | 19500 | 5.05 | 98,475 |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. | Sqm | 6500 | 123.85 | 8,05,025 |
| 41 | Two coats | Sqm | 8667 | 90.05 | 7,80,463.35 |
| 42 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | Sqm | 5633 | 20.85 | 1,17,448.05 |
| 43 | One or more coats on old work | Sqm | 867 | 86.55 | 75,038.85 |
| 44 | Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat. | Sqm | 6500 | 94.15 | 6,11,975 |
| 45 | With cement mortar 1:4 (1 cement : 4 fine sand) | Sqm | 1083 | 462.3 | 5,00,670.9 |
| 46 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) | cum | 87 | 2,007.1 | 1,74,617.7 |
| 47 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 9 | 2,928.1 | 26,352.9 |
| 48 | In cement mortar | cum | 9 | 1,698.45 | 15,286.05 |
| 49 | From brick work in cement mortar | 1000 Nos. | 2600 | 5,522.25 | 14,357.85 |
| 50 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. | Kg | 3467 | 4.65 | 16,121.55 |
| 51 | Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. | Sqm | 3467 | 209.4 | 7,25,989.8 |
| 52 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. | Sqm | 1517 | 45.05 | 68,340.85 |
| 53 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer- in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | cum | 87 | 219.35 | 19,083.45 |
| 54 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests | Each | 22 | 5,781.35 | 1,27,189.7 |
| 55 | W.C. pan with ISI marked white solid plastic seat and lid | Each | 11 | 5,540.55 | 60,946.05 |
| 56 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer | Each | 22 | 3,459.05 | 76,099.1 |
| 57 | 510x1040 mm bowl depth 225 mm | Each | 22 | 6,677.4 | 1,46,902.8 |
| 58 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. | Each | 22 | 299.35 | 6,585.7 |
| 59 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia | Each | 17 | 6,119.15 | 1,04,025.55 |
| 60 | 20 mm nominal dia Pipes | Metre | 98 | 513.75 | 50,347.5 |
| 61 | 25 mm dia nominal bore | Metre | 65 | 417.95 | 27,166.75 |
| 62 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | Litre | 10833 | 9.7 | 1,05,080.1 |
| 63 | 15 mm nominal bore | Each | 11 | 715.05 | 7,865.55 |
| 64 | 15 mm nominal bore | Each | 9 | 708.4 | 6,375.6 |
| 65 | 15 mm nominal bore | Each | 9 | 594.75 | 5,352.75 |
| 66 | 15mm nominal bore | Each | 9 | 500.35 | 4,503.15 |
| 67 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge. | Each | 22 | 61.7 | 1,357.4 |
| 68 | For pipes 100 to 250 mm diameter | Each | 33 | 683.7 | 22,562.1 |
| 69 | Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. | Sqm | 87 | 820.8 | 71,409.6 |
| Schedule total | ₹1,88,26,927.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Supplyofrainforcedsteelsplcondition2025.pdf Supply of reinforced steel spl condition 2025
ATTACHMENT
InstructionstoTenderers52025.pdf
ATTACHMENT
POAGuidelines.pdf
ATTACHMENT
GeneralConditions09.09.2025_1.pdf
ATTACHMENT
GCC-2022-updateduptoACS10.pdf
ATTACHMENT
SFMSPolicyBGverificationviaSFMS.pdf
ATTACHMENT
Supplyofrainforcedsteelsplcondition2025.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .