Repair/Renovation/Upgradation works of PWD Guest House at Hyderpora under the Jurisdiction of PWD(RnB) Project Division 1st. Srinagar.

Removing old damaged wooden flooring in rooms including stacking of serviceable material & disposal of unserviceable material within 50 mtrs lead

Removing white or oil bound distemper colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface.to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture,having low VOC (Volatile Organic Compound ) content With water thinnable cement primer on wall surface havingVOC content less than 50 grams/litre

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Finishing walls with textured exterior paint of required shade :New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with: 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part-I : 2011 (Board with BIS certification marks)

Providing & Fixing of wooden flooring AC-5, 12mm thick of premium quality brand 6 feet long. 75 inch wide by tongued & groove technique including railing P.V.C sheet screws etc complete job including profiles complete.

Providing and fixing ISI marked flush door shutters non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3mm ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 35mm including all hardware fittings door closure, mortice lock,door stopper, back stopper,hinges all side beedings all complete job as per design and direction of EIC

Providing & fixing cupboard made out of 19mm thick commercial board & 6mm ply on back ISI marked of standard quality as approved) all inside surface finished in laminate 0.8 mm thick of approved shade & quality, and external surface lipped with veneer and , complete in all respects including all hardware fittings, handles, hinges of approved brand complete job.

Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Fina coat to be done in 1 or 2 layers without gap of time.)

Removal of waste by manually means by engaging of dumping trucks/other machinery required for carriageand and disposal of rubble,Mulba from site and safe disposal the same beyond municipal limits

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm complete job.

Providing and laying gang saw cut of specified thickness, mirror polished

pre- moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in Charge. 18 mm thick

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Renewing glass panes, with wooden fillets wherever necessary :Float glass panes of thickness 5.0 mm (weight not less than 12.5 kg/sqm)

Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm

Providing and fixing Tiled/GRID false ceiling of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paintpaint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 0-12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard manufactured from natural gypsum as per IS 2095 part-I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.

Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning anyGI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Labour engaged for cleaning of roofs & courtyard area of Store Divisional office Guest house by collecting leaves and other waste material and dismantling works of all kinds.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm.

Engaging carpenter for day to day repairs to woodwork like doors, windows etc

Engaging welder for day to day repairs like doors, windows , Gates etc

P/F profile sheeting 1000 mm minimum cover width with minimum cover 28-32 mm crests,manufactured out of 0.50 mm TCT (Total coated thickness)Hi Tensile SMP galvalume steel.The Sheets shall have wide pans with 2 to 3 no's stiffening ribs,effective water shading with male/female ends with return legs of side laps for purlin support and anti capillary fluite inside,lap.The sheets shall have hot dip metallic coatings of zinc and Aluminium(150 gms/sqm.Zinc/Aluminium coating mass total on both sides,AZ-150,per AS 1397)550 Mpa yeild stress providind silicon modified polyester coating of approved colour of total thickness of 35 microns comprising of 20 microns of exterior coat of SMP over 5 microns polyester coat back coat of 5 micron primer coat on both surfaces incl:ridges/hips/valleys/laps and using 12 mm polymer coated hot dip galvanised hex self drilling fastners on each crest of sheets for connection with purlins etc.(colour coated).

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm.

P/F overhead counter cabinets madeout of 19mm thick commercial board, 6mm thick ply on backside and all inside/outside surfaces fitted with sunmica and piano hinges of standard quality incld. Handles, tower bolts and all hardware fittings complete job.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 meters lead : Of area of 3 sqm. and below

Providing and fixing of sanitary fittings , fixtures as per design and direction o

f EIC. complete job.

Water tank cover

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests.

Long body bibcock

Angle valve

Waste pipe

Wall mixer 2 in 1

Wash basin mixer

Waste coupling

Ballcock (heavy)1 inch

Gate valve 1/2 ''

C.P. Jali 4" cockroach

PVC connection 18 ''

PVC connection 24 ''

Shower 6 '' with shower rod 2ft long

corner shelves

Health faucet

Paper Holder

Towel Ring

Soap dish

Washbasin

Towel rod 2 ft

Bottle Trap

Dismatling of old damaged sanitary fittings including disposal of same with in 50 mtrs lead

Providing and fixing hardware fittings as per design and direction of EIC. complete job.

Tower bolt SS 6"

SS handle 6"

Godrej Door lock

Door closer (Hardwyn, Godrej)

Almirah lock (Godrej)

SS hinges al bihari ( Hettich)

Cylindrical lock (Godrej)

Brass Aldrop 10"

Brass handle 6"

Brass door stopper

P/F 19 mm thick commercial board in shelves, shutters or wherever damaged and lipped with veneer including melamine polishing complete job.

P/F 8mm thick plyboard & (3''/2'' wooden planks) for support of ceiling of roof incld. Nuts ,nails,carpentor, labour, fevicol complete job etc.

Supplying and fixing C.I. cover without frame for manholes

Rectangle cover

500 mm diameter C.I. cover (medium duty) the weight of the cover to be not less than 58 kg. 20

Rectangular shape 600x450 internal dimensions

Providing & fixing TV Cabinet consisting of water proof 12 mm thick HDHMR (HIGH DENSITY HIGH MOISTURE RESISTANCE) board fixed on walls with the support of fasteners using screws complete with cutting for switch boards and other requirements as per design.veneer 4mm (durian make) lipped

Providing & fixing 4 mm veneer (virgo make or equivalent) lipped over 8 mm thick HDHMR board for architrave along the window and door jambs complete in all respects.

Providing and fixing of Indoor P.V.C paneling for walls decors make of approved design including skirting and biding, fixing ,nails, screws, wastage of complete job.

Providing and fixing of wooden paneling/ lining of 12mm (net thickness) including providing and fixing of ground frame work of KD wood including cost of screws, wooden plugs, Touchwood etc. complete as per directions of EIC.(made from imported wood).

Providing and fixing of KHATAM BANDI ceiling of first class budloo/ fir wood excluding the cost of frame work which is to be paid separately as per design and direction of EIC.(changez khani)

Providing and fixing of wooden beading ornamental 25mmx6mm size of Budloo wood.

Providing and fixing of PVC Decorative Mesh (jaffri) wherever required of specified size including cost of beading and nails complete as per design and direction of EIC.

providing & fixing Roller blind for windows including installation complete job as per design and direction of EIC.

Providing and Supplying King Size Bed (6'*6'6'') with upholstered Head Board including Side Tables with drawer units for storage as per design and direction of EIC.

Repair of chairs /sofa by way of removing existing damaged upholsterey and replace it with new one,including back ply,foam,nails,fevicol and bottom seat ply including carpenter and polishing of the chair complete in all respects upholsterey as per design and direction of EIC.

Providing and fixing of shower cubical made uo of 10mm thick toughened glass with all fittings using ozone patch fitting complete with S.S brackets and including Stainless steel support rods horizontal and vertical on top,hinges (saint Gobain, modiguard or equivalent) complete job

Repairs to plaster of thickness of 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of walls complete including disposal of rubbish to the dupming ground within 50 meters lead with cement mortar 1:4 (1 cement : 4 fine sand)

ELECTRIC WORK

Part '' A'' Points ,Wires , switches-sockets & Conduits

Providing ,Laying ,connecting ,Testing and commissioning of wiring for Lighting points /fan points /Exhaust fan points /call bell points with 2 x1.5 sq mm (P+N) FR PVC insulated multistranded copper conductor wires of standard make dully ISI make (Like Anchor /Finolex /Polycab /Paramount /Paraflex /KEI /Eq.make ) laid in recessed or surface conduitng system and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 6 amp control switch of approved quality and colour housed in zinc chromate passivity GI boxes with modular cover plate complete as per specification and as required .Complete as required and .(Excluding cost of conduits)

Providing ,Laying ,connecting ,Testing and commissioning of wiring for Heating points with 3x4 sq mm (P+N+E) FR PVC insulated grade flexible stranded copper conductor wires in recessed or surface conducting system and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socket out let along with 240 volt 16 Amp control Switch of approved quality and colour housed in zinc chromate passivity GI boxes with inter connection complete as per specifications and as required

Providing ,Laying ,connecting ,Testing and commissioning of wiring for Heating points with 3x2.50 sq mm (P+N+E) FR PVC insulated grade flexible stranded copper conductor wires in recessed or surface conducting system and incl the cost of supplying and fixing modular grid plate mounted flush mounted 240 volts 16 amp 6 pin combined shuttered socket out let along with 240 volt 16 Amp control Switch of approved quality and colour housed in zinc chromate passivity GI boxes with inter connection complete as per specifications and as required

Supply , Laying and connecting ,testing and commissioning of following FR PVC Insulated Multi Strand copper wire of standard make dully isi marked

Supply and fixing of MS Steel conduit of standard make dully ISI Marked incl its accessories like bends ,sockets ,cliffs ,saddles etc to be fixed on walls,incl refacing of walls complete job

19 mm dia

25 mm dia

32 mm dia

Supplying and fixing of Medium Class PVC pipe (B-type) of Prince /Finoilex /Oliv /Eq.make with allied accessories like bends ,Tees ,Collars etc to laid as per site requirement including cutting and making good the walls etc.:-

25 mm dia

Providing ,Installation ,Testing and commissioning of 1000 Watt Gayser element of recold /venius make to replace the fused gayser element of Gaysers

Supply and Fixing of following Switches ,Sockets etc of Modullar series of standard make dully isi marked ,incl p/f cover plate of same make (Legrend /Schinder /GM /ABB /L&T /Eq.make )

6 Amps Switches

6 Amps ,3-Pin Socket

16-20 Amps Socket

15 Amps Switch

32 Amps Socket

32 Amps Switch

Bell Push

Fan Step regulator

TV Dish Socket

Telephone/Computer Jack

Demmi

indicator

Supply and Fixing of Gang Box of approved make

one way

two way

three way

four way

Six Way

Eight way

Providing and fixing of PVC Modular /G.I Box of standard make dully isi marked to be fitted as per site requirement ,incl recessing refacing of

walls complete job.

Part '' B'' Fan fixtures

Supply , Installation , Testing and commissioning of following Ceiling having down rod and connection wire of Bajaj / Usha /Havells /C.G / Syska /Helonix Make fitted as per site requirment incl making of connections

1200 mm Sweep Ceiling fan

Supply , Installation , Testing and commissioning of Exhaust Fans Shutter type of standard make dully isi marked fitted as per site requirment incl making of connections

300 mm Sweep having PVC Body Shutter type Exhaust fans

Supply , Installation , Testing and commissioning of Wall Fan having double ball bearing of isi marked , fitted as per site requirment incl making of connections.

Supply , Installation ,testing and commissioning of Modulars AC Box having fitted with 32 Amps Switch -Socket and 32 Amps SP MCB fitted on GI/PVC Box with cover plate and 16 Amps 3-Pin Top

Part F :- Lighting Fixtures

Supply and fixing of Batten /Angle holder of G.M/Eq make

Supply, Installation ,testing and commissioning of LED Lamps (B22/E27) Warm / Cool, of standard make dully isi marked

12 Watts

14-15 Watts

16 Watts

Supply ,installation ,Testing and Commissioning of 20-22 Watts ,4 ft long LED tube light fitting having Aluminium Body (CRCA) of standard make dully isi marked ,incl ceiling rose and 2-core transparent wire for connections complete job.

Supply ,installation ,Testing and Commissioning of 20-22 Watts ,4 ft long LED tube light fitting having PVC Body of standard make dully isi marked ,incl ceiling rose and 2-core transparent wire for connections complete job.

Part H :- Heating Devices & AC's etc

Supply of 13-Fin Oil filled radiators 2800 Watt with over heating protection of standard make dully isi marked,Incl its lead and three pin top for main house.The job includes providing of replacement warranty of equipment for 2 years

Supply of Flying insec killer having UV Tube insect catcher Bug zapper repellent machine with high voltage current rectifier electric system.The job includes providing of replacement warrenty of equipment for 2 years (Sample to be approved before installation)

Wet servicing of AC's (1 Ton/1.5Ton/2 Ton)