Spl repair to security fencing from TCP No 06 to butchery and from butchery to unit RP gate in ILP location of Med Regt under AGE B/R (P-1) at Faridkot Mil Stn

Amount

Site clearance in soft/loose soil by clearing of shrubs,vegetation,grass,bush,weed, trees and saplings not exc 30 cm in girth,filling the area with earth (where required), levelled and rammed the surface including removing the excavated material upto a distance 50 metre outside the periphery of the area complete all as specified and directed .

Excavating in post holes each not exc 0.50 cum, getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layer not exc 25cm and removing surplus soil to a distance not exc 50m and making good surface all as specified`and directed .

Dismantling posts or struts (wood, steel or RCC) of any section, including taking out embedded portion in concrete, brick work etc and making good the disturbed ground complete all as specified and directed .

S&F mild steel work as in angle iron posts and struts in fencing, including cutting tops to shape as directed, drilling holes, notching for wire etc,including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-290 Gde E-165 quality complete all as specified and directed

All as per Ser item No 04 here-in-before but except angle iron posts and struts (angle iron retrieved from Ser item No 03 here-in-before to be re-used) complete all as specified and directed .

S&F mild steel work as in angle iron post using angle iron as per existing size for increasing the height of existing post and making Y shape at the top of post including cutting tops to shape as directed, drilling holes, notching for wire etc,including all necessary drilling, bolting or riveting etc and similar works conforming to Fe-290 Gde E-165 quality complete all as specified and directed

M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed .

M&L for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for preparation of old steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed .

Dismantling fencing wire mesh, barbed wire ,any type complete all as specified and directed .

Supply only mild steel galvanized chain link fencing of aperature 75mmx75mm complete all as specified and directed. Note: The weight of chain link fencing shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account.

Fixing only chain link fencing including line wires(steel wire), any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire, drilling hole in the existing angle iron post (if required) compete all as specified and directed .

Dismantling fencing wire mesh and re-fixing in the same location or other location to any type of standards, rails, straining bolts etc including provision of binding wire compete all as specified and directed .

S&F mild steel round or square bars ,flat iron conforming to Fe-290 Gde E-165 quality bent to shape and fixing by welding/hooking complete all as specified and directed .

S&F mild steel screw bolts (machine made),diameter of neck 5 to10mm with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n. exc. 5cm long complete all as specified and directed .

S&F galvanised,2strand,steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire,staples or steel pins etc. complete all as specified and directed .

Taking down old mild steel round bar and re-fixing in the same location or another location after bent to shape by welding/hooking etc complete all as specified and directed .

M&L for punched tape concertina coil, 600mm diameter ,06 metre openable length,having 50 Nos round per 06 metre, tied with angle iron post with necessary bolts,concertina coil of core wire diameter 2.5mm,blade thickness 0.5mm,blade length 12mm,width of blade 15mm and spacing of blade 26mm complete all as manufacturer and directed . Note: The weight of concertina coil shall be ascertained by BOO as ordered by GE and payment shall be made accordingly and contractor shall have no claim on this account. Note :- A Sum of Rs. 2.31,686.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 16 (Schedule of credit) of Tender Documents.

Vinod Kumar Bajaj

M/S BSS AND SONS

N.G BUILDERS

NEW AMRITSAR CONSTRUCTION COMPANY