General civil and wood works for creating seating space in office building, New Delhi.

CENTRAL WAREHOUSING CORPORATION

(A GOVT. OF INDIA UNDERTAKING)

NIT Number E NIT_CWC/CO/Engg. /26-27/39

Name of Work Creation of Seating Space in Engineering Division through Relocation of Compactor System, Refurbishment of Existing Furniture and Allied Civil & Interior Works at Corporate Office, New Delhi

NAME OF CONTRACTOR

Sd.-I Estimated Cost under Schedule-I

Sd.-II Estimated Cost under Schedule-II

Grand Total (In Figures)

Grand Total (In Words)

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Estimated Cost under Schedule-I

NIT Number E NIT_CWC/CO/Engg. /26-27/39

Name of Work Creation of Seating Space in Engineering Division through Relocation of Compactor System, Refurbishment of Existing Furniture and Allied Civil & Interior Works at Corporate Office, New Delhi

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Creation of Seating Space in Engineering Division through Relocation of Compactor System, Refurbishment of Existing Furniture and Allied Civil & Interior Works at Corporate Office, New Delhi

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

CENTRAL WAREHOUSING CORPORATION (A Govt. of India Undertaking)

Estimated Cost under Schedule-II

NIT Number E NIT_CWC/CO/Engg. /26-27/39

Name of Work Creation of Seating Space in Engineering Division through Relocation of Compactor System, Refurbishment of Existing Furniture and Allied Civil & Interior Works at Corporate Office, New Delhi

NAME OF CONTRACTOR

Sr.No. Name of Work Total Amount (In Rs.) Quoted rates (Above/Below/At par) Rate to be quoted in percentage(%) Quoted % In Words Quoted amount in figure

1 Creation of Seating Space in Engineering Division through Relocation of Compactor System, Refurbishment of Existing Furniture and Allied Civil & Interior Works at Corporate Office, New Delhi

TOTAL QUOTED PRICE=

Amount Quoted (In Words)

Central Warehousing Corporation (A Govt. of India Undertaking)

Estimated Cost under Schedule-I

Creation of Seating Space in Engineering Division through Relocation of Compactor System, Refurbishment of Existing Furniture and Allied Civil & Interior Works at Corporate Office, New Delhi

SLNo DSR No. Description Qty Unit Rate Amount

1 9.7 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

2 9.75 Providing and fixing bright finished brass door latch with necessary screws etc. complete :

3 9.81 Providing and fixing bright finished brass handles with screws etc. complete:

4 9.84 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 4 Each 983.15

5 9.9 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.

6 9.105 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

6.1 9.105.1 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks) 35.41 sqm 2131.1

7 9.115 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge, 12 one set 414.2

8 9.127 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

9 9.172 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge, 30 one set 885.1

10 10.25 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

10.1 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 155.84 kg 172.6

11 10.28 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 67 kg 772.4

12 21.18 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 10.92 sqm 5325.9

Central Warehousing Corporation (A Govt. of India Undertaking)

Estimated Cost under Schedule-II

Creation of Seating Space in Engineering Division through Relocation of Compactor System, Refurbishment of Existing Furniture and Allied Civil & Interior Works at Corporate Office, New Delhi

SLNo Description Qty Unit Rate Amount

1 Providing and fixing 12.0 mm thick toughened glass partition, of approved make, fixed with stainless steel patch fittings (including top and bottom pivots as required), including cutting, edge polishing, drilling of holes, etc., as per site requirements. The glass shall be plain/clear toughened glass conforming to IS 2553 (Part 1) with approved pattern of acid etching/frosting as directed by Engineer-in-Charge. The work includes all necessary fittings, fixtures, accessories making good the adjacent surfaces. The rate includes cost of all materials, labour, tools and tackles, scaffolding, transportation, wastage, and all incidental charges required to complete the work in all respects to the satisfaction of Engineer-in-Charge. 80.33 sqm 4623.25

2 Providing and fixing 1.5 mm thick decorative high gloss acrylic laminate of approved make, colour and shade, having UV-resistant high-density protective surface layer and reverse side suitable for adhesive bonding, fixed over prepared surface with approved quality adhesive, including cutting, edge finishing, complete in all respects as per manufacturer's specifications and as directed by the Engineer-in-Charge. 110 sqm 2539.6000000000004

3 Providing and fixing 38 mm (1½") wide pre-glued flexible PVC edge banding with white melamine finish, supplied in 250 ft rolls, of approved make and quality, applied over exposed edges of particle board/MDF/plywood using edge-banding machine or approved method, including trimming, finishing, and complete in all respects as per the manufacturer's specifications and as directed by the Engineer-in-Charge. 1 Each 27562.25

4 Providing and fixing 25 mm(1") wide pre-glued white melamine edge banding tape, supplied in 25 ft rolls, of approved make and quality, on exposed edges of plywood/particle board/MDF, including trimming, finishing and complete in all respects as per the manufacturer's specifications and as directed by the Engineer-in-Charge. 4 Each 7652.25