CERTAIN REPAIRS/ REPLACEMENT SUCH AS JOINERY, SANITARY FITTINGS and FIXTURES, PLUMBING FITTINGS, PLINTH PROTECTION, WPT, PLASTERING, ROLLING SHUTTERS/GARAGE GATES OH TANKS ETC AT ZONE B and ZONE E UNDER GE CHENNAI

Amount

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed.

M&L for 30mm thick 2nd class hard wood Glazed and skeleton window shutters open rebated and prepared to receive glass, but divided into squares, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge.

M&L for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed.

Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood Glazed and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. without sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood plain framed panelled factory made shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both the faces. The size of rail and stile as per IS :1003 (part I), Kiln seasoned and chemically pressure treated and skeleton door shutters open rebated and prepared to receive glass, gauze, etc. with sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

M& L 40 mm thick flush door shutter, solid core construction , with block board core and plywood face panels, commercial type on both side etc. complete all as specified and as directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed.

S&F Factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per drawing complete all as specified and as directed. Note: PVC door shutters shall be provided with 02 No. of 125mm size aluminium anodised handle, 03 No. of 100mm mild steel hinges and 02 No. of 150mm size aluminium anodised tower bolt of extruded section per shutter. The unit quoted rates shall be deemed to include the cost of builder’s hardware provided.

Taking down shutters of any description n.exc. 1sqm and refixing in the same opening after cutting easing with necessary hardware fittings, complete all as specified and as directed.

Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening after cutting easing with necessary hardware fittings, complete all as specified and as directed.

S&F in repair aluminium powder coated sliding window using aluminium section weighing not less than 0.495 Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with aluminium anodised snap beads, screws and fixed along with same section in three rolling sliding shutters two or fully glazed with 5mm thick tinted glass fixed with glazing clips, and one for aluminium wire mesh shutters etc (The rate is inclusive of all fixings of builders hardware such as wire mesh locking arrangements etc complete all as directed by Engr-in-charge) including taking down complete all as specified and directed

M&L for applying two coat of Synthetic enamel paint for wooden surfaces including necessary preparation of new wooden surfaces of any description exc. 10cm width or girth complete all as specified and as directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed.

S&F Aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames fixed in repairs, complete all as specified and as directed.

S&F Butt hinges, 100mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed.

S&F Butt hinges, 75mm size medium weight cold rolled mild steel Etc., complete all as specified and as directed.

S&F Aluminium anodised barrel tower bolts of extruded section 150mm long all as specified complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified complete all as specified and as directed.

S&F aluminium handles cast type anodised 100 mm size complete all as specified and as directed.

S&F aluminium handles cast type anodised 125 mm size complete all as specified and as directed.

S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed.

S & F mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F in repairs mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed.

S& F 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S& F in repairs 140 mm over all length of cover plate, floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor complete all as specified and as directed.

M&L 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorate face veneers on one faces fixed with screws to timber frame work including dismantling of existing boarding any description fixed in any position complete all as specified and as directed

M&L 18/19 mm thick Particle board, medium density, flat pressed, single layer type / three layer type with BWR type adhesive, fixed with screws to timber frame work including dismantling of existing boarding any description fixed in any position complete all as specified and as directed.

S&F continuous (piano)hinges mild steel, bright finish or electro galvanised width of flaps (when open)in mm 30mm as fixed in repairs complete all as specified and as directed.

Supply and fix in repair Aluminium robe hook 50mm to 60mm complete all as specified and as directed.

M & L Aluminium designer curtain rods (Draw berms rod) exterior grade 3 mm thick with holding clamps and fixed to wall PVC rawel plug and brass screws complete all as specified and as directed. including dismantling one of any description.

M & L Aluminium designer curtain rod brackets suitable for above complete all as specified and as directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm each pane including hacking out old broken glass complete all as specified and as directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm each pane complete all as specified and as directed.

S&F in repair sheet glass 4mm thick frosted or obscured on one side ordinary quality and glazing with oil putty/wooden beads as directed in squares n.exc 0.50 sqm each pane complete all as specified and as directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work including removal of rubbish complete all as specified and as directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fast etc depth of embedded portion of hold fasts exc half brick but n exc one brick thick wall and making good to the dismantled portion in cement mortar 1:3 and providing cement concrete 1:2:4 type B1 for concreting of hold fasts complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on brick or stone wall etc including racking out joints hacking for keys scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brickwork or concrete surfaces in CM 1:4 finished even & smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 15mm thick on walls on fair faces of brick work or concrete surfaces in Cement mortar 1: 6 and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 5 mm thick in Cement mortar 1: 3 on ceiling and finishing the surfaces fair and even with out using extra cement complete all as specified and as directed.

Supply only liquid water proofing compound conforming to is 2645 - 2023 complete all as specified and as directed.

M&L two coats of oil bound distemper over a coat of primer over a coat of wall care putty 3mm thick on newly plastered surfaces of including preparation of surface complete all as specified and directed.

M&L for three coats of white washing on new plaster ceiling surface over 3mm wall care putty thick including preparation of plastered surfaces complete all as specified and directed.

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gms/litre and UV resistance as per IS15489:2004., alkali & fungal resistance dirt resistance exterior paint of required shade (company Depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm over new surface complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description complete all as specified and as directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and as directed.

M&L for erection of mild steel rolled sections in roof trusses (framed) trussed purlins (beam, tee, angle, channel or flat section) including distance pieces, cleats etc. complete. Steel sections shall conform to grade Fe-410 -W(Gde-E-250) Quality A complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint on new steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide complete all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, any thickness, including nainital or similar pattern roof covering complete all as specified and as directed.

S&F pre-painted galvalume plain steel sheet high tensile 550Mpa yield strength colour coated Galvalume steel sheet 0.50mm (TCT) thickness as in ridges, cladding and flashings as per site requirement fixed with self drilling / self tapping screws with EPDM seal complete al as per manufacturers specification and instruction complete all as specified and as directed.

S&F pre-painted galvalume profile high tensile 550Mpa yield strength colour coated Galvalume steel sheet 0.50mm (TCT) thickness as in roof covering including ridges having maximum pitch of 250mm C/C and minimum 30mm crest depth in length as per site requirement fixed with self drilling / self tapping screws with EPDM seal complete all as per manufacturers specification and instruction and as directed by Engineer-in- Charge.

S &F Vitreous china wash down water closet, white, squatting pan Orissa pattern of size 580x440mm with integral foot rest including making necessary connections to soil pipes and flushing cistern, fixed as in repairs complete all as specified and as directed.

S & F Vitreous china wash down water closet (pedestal pattern ) white (excluding fixing bolts flushing cistern and flush pipe) incl taking down seat cover and fixed in repairs complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity with complete accessories, PVC flush pipe, PVC over flow pipe etc., and connected to water closet as per manufacturers instruction and as directed by the Engineer-in-Charge including removal of existing cistern etc.

S&F in repairs 15mm PVC connection 450mm long of superior quality complete all as specified and as directed.

S&F plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets fixed in repairs complete all as specified and as directed.

S&F 15mm dia bib taps, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed in repairs complete all as specified and as directed.

S&F 15mm dia pillar taps, cast copper alloy with capstan heads, chromium plated fancy type, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and as directed.

S & F 15mm dia hot and cold mixer type pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure with along screwed shanks and fly nuts screwed for iron pipes fixed in repairs complete all as specified and as directed.

S&F In repair 15mm bore dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed

S & F in repairs 32mm dia bottle trap of PTMT having minimum water seal of 25mm complete all as specified and directed.

S & F Cast Aluminium (Die cast ) body door closer hydraulically regulated, designation No.2 universal type, suitable for door shutters up to 701mm to 850 mm in width and of weight between 36 to 60 kg fixed in repairs complete all as specified and as directed.

S & F of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete including taking up or down old existing damaged steel/UPVC pipes all as specified and directed. Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete all as specified and as directed including taking up (or) down the existing GI pipe for 16mm dia bore pipe.

S & F of CPVC Pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceilings or laying in floors complete including taking up or down old existing damaged steel/UPVC pipes all as specified and directed. Galvanised steel water tubing medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., fixed to walls/ceilings or laid in floors etc., complete all as specified and as directed including taking up (or) down the existing GI pipe for 20 mm dia bore pipe.

Supply, hoisting and fixing in position of 500 liter capacity in two layer Rotational Moulded Polyethylene water storage tank (cylindrical vertical with closed top) all as specified in SSR Part- I including dismantling the existing PVC tank and taking down tank cover and existing float valves complete all as specified and as directed.

Supply, hoisting and fixing in position of 1000 liter capacity in two layer Rotational Moulded Polyethylene water storage tank (cylindrical vertical with closed top) all as specified in SSR Part- I including dismantling the existing PVC tank and taking down tank cover and existing float valves complete all as specified and as directed.

S&F in repairs stainless steel sink of size 915mmx460mm with draining board and bowl size 410mmx330mmx160mm, made out of 1mm thick stainless steel sheet of good quality including proven of waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets complete all as specified and as directed.

S&F in repairs stainless steel sink over all size 495x420 mm and bowl size with out draining board and bowl size 410x330x160mm, made out of 1mm thick stainless steel sheet of good quality including proven of waste coupling and 40mm dia waste pipe fitted over a pair of CI brackets complete all as specified and as directed.

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed for 15mm bore pipe and fixed in repairs complete all as specified and as directed.

S&F Ball valve high pressure of PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed for 20mm bore pipe and fixed in repairs complete all as specified and as directed.

Material and labour for servicing the existing Garage shutters of any size any type by taking down the cover, laths and complete accessories of garage shutter and made functional including replacement of black sheet 1mm thick, hinges, including welding works if required and applying grease complete all as specified and as directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and as directed.

M&L for Galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non asbestos cement fibre board of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions complete all as specified and directed.

Supply and Fix 2 levers Locks, drawer, cupboard shutters grade I, size 75 mm Brass complete all as specified and directed.

Supply and Fix 4 levers Mortice Locks, vertical type, size 100mm Brass complete all as specified and directed.

Demolition of reinforced cement concrete in any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M &L for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or Sloping) rough finished concrete surfaces.

M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending and binding with MS wire annealed not less than 0.90mm dia or securing with clips complete all as specified and as directed.

All as per item No 83 above but 8 mm dia TMT bars complete all as specified and as directed.

M & L for demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L 75mm thick PCC type B1, (1:2:4) using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified and as directed.

Demolition of slabs and HP tiles of any description or thickness in roofs laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for PCC 1:2:4 type B0 25 mm thick (using 12.50mm graded coarse aggregate) finished fair and even over concrete surfaces on roof top/ sub base of floor tiles complete all as specified and as directed.

M&L for rendering in cement mortar 1:4 10mm thick on fair faces of brick work or concrete surfaces and finished the surfaces fair and even complete all as specified and as directed

M&L APP modified prefabricated five layer water proofing membrane mineral finish, 3mm thick and weighing not less than 3.6 kg/sqm reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm and torch applications of membrane with 100mm overlap after necessary preparation of surface complete as per manufacturers instructions with bituminous aluminium paint on top complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over a screed bed or bedding layer of CM 1:6 15mm thick for laying floor finishes complete all as specified and as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over a screed bed or bedding layer of CM 1:6, 15mm thick for laying floor finishes complete all as specified and as directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Rounding to edges of stone slabs, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and as directed.

M&L for Vitrified light shade ceramic tiles 10mm thick (square / Rectangle) polished, area of each tiles n.exc.0.36sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer of mortar 15mm thick in cement mortar 1 : 4 for laying floor finishes complete all as specified and as directed

Ditto above for work on vertical surfaces such as skirting, dados and risers to step etc.complete all as specified and as directed.

M &L Non -skid coloured ceramic joint free tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M &L Non -skid coloured ceramic tiles 7 mm to 8 mm (Square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in CM 1:4 on fair face of brick or concrete surface complete all as specified and as directed.

S&F in repair CP Square trap size 101mm x 101mm make that shall match with existing fitting i.e., Cat No-FT-73 of Prayag complete all as specified and as directed.

S&F in repair CP Cockroach trap size 101mm x 101mm of make that shall match with existing fitting i.e., Cat No FT-23 of Prayag complete all as specified and as directed.

Supply and Fix in repairs health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated of make that shall match with existing fitting i.e., Cat No. BEA-97 of Prayag complete all as specified and as directed.

Supply and fix in repair toilet paper holder with flap recessed type matt chromium plated of make that shall match with existing fitting i.e., Cat No- ba-38 of Prayag complete all as specified and as directed.

S&F in repair PVC waste pipe for wash hand basin (size 31/32mm x 900mm length) of make that shall match with existing fitting i.e., Prayag Cat No.327 complete all as specified and as directed.

Supply and fixing in repair PVC 38/40mm x 1150mm size waste pipe for SS Sink of make that shall match with existing fitting i.e., Cat No-330 of Prayag complete all as specified and as directed.

Supply and fix in repair CP wall mixer( 2-in-1) with L Bend (provision for over head shower ) of make that shall match with existing fitting i.e., Cat No-8375 of Prayag complete all as specified and as directed.

Supply and fix in repair CP wall mixer( 3-in-1) with L Bend (provision for over head shower ) of make that shall match with existing fitting i.e., Cat No-8780 of Prayag complete all as specified and as directed.

S&F In repair15mm dia angle cock with flange, chromium plated make of that shall match with existing fitting i.e., Cat No.8310 of Prayag complete all as specified and as directed.

S&F in repair 15mm dia 2 way angle cock with flange, chromium plated of make that shall match with existing fitting i.e., cat No 8311 of Prayag complete all as specified and as directed.

S&F in repair15mm dia bib cock long body with flange plate, chromium plated of make that shall match with existing fitting i.e., Cat No-8308 of Prayag complete all as specified and as directed.

S&F In repair Tumbler holder with glass of make that shall match with existing fitting i.e., Cat No-BA 26N of Prayag complete all as specified and as directed.

S&F In repair CP waste coupling heavy (full thread) 32mm of make that shall match with existing fitting i.e., Cat No-BE-11 of Prayag complete all as specified and as directed.

S&F CP 125mm size over head shower ABS round with 225 brass arm & flange of make that shall match with existing fitting i.e., Cat No BS-69 of Prayag complete all as specified and as directed.

S&F In repair concealed stop cock regular body 15mm with flange plate, chromium plated of make that shall match with existing fitting i.e., cat No-8318 of Prayag complete all as specified and as directed.

Supply and fix in repair soap dish ,matt finished chromium plated (MCH/Colour) of make that shall match with existing fitting i.e., Cat No-BA-05 of Prayag complete all as specified and as directed.

S & F in repair corner glass shelf superior quality matt finished chromium plated (MCH/Colour CP ) with bracket and fittings of make that shall match with existing fitting i.e., cat No.BEA-44 of Prayag complete all as specified and as directed.

Supply and fix in repair glass shelf matt finished chromium plated (MCH/Colour CP) of size 600mm long with bracket and fittings of make that shall match with existing fitting i.e., Cat No-BEA-45 of Prayag complete all as specified and as directed.

Supply and fix in repair towel ring square, chromium plated of make that shall match with existing fitting i.e., cat No-BA-11 of Prayag etc complete all as specified and as directed.

S&F In repair CP towel rack stainless steel, of make that shall match with existing fitting i.e., cat No-BA-12 of Prayag complete all as specified and as directed.

S&F in repair Towel rail 600mm long CP of make that shall match with existing fitting i.e., Cat No-BA-10 of Prayag complete all as specified and as directed.

Supply and fix Stainless steel plate rack of size (36'' x 36 " 10") with separators and 3 tier shelves, provisioning of hook 9 Nos made out of stainless steel sheet of grade AI SI 304 of make that shall match with existing fitting i.e., CAT No.P-350 ofPrayag and fixed in repairs complete all as specified and as directed.

Supply and fixing in repair Bib cock nozzle with flange (washing machine tap) finished chromium plated (MCH/Colour CP) of make that shall match with existing fitting i.e., Cat No. 8305 of Prayag complete all as specified and as directed.

S&F Cabinet Mirror PTMT 400x500mm with sided shelves fancy type of superior quality of make that shall match with existing fitting make that shall match with existing fitting i.e., i.e., Cat No.554 of Prayag complete all as specified and directed.

S&F 40mm CP brass Full thread waste coupling for sink fixed in repairs make that shall match with existing fitting i.e., Cat No. BEA-16B of Prayag complete all as specified and as directed.

S&F in repair CP sink cock regular spout with flange (W/M) make that shall match with existing fitting i.e., per Cat No 8716 of Prayag complete all as specified and as directed.

S&F in repair Brass peg set, solid body make that shall match with existing fitting i.e., cat No BEA-30 of Prayag complete all as specified and as directed.

M & L in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 15mm dia bore pipes complete all as specified and as directed.

M & L In repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for 20 mm dia bore pipes complete all as specified and as directed.

M & L In repair PVC over head water tank cover suitable for 250 to 2000 lt capacity tank including hang devise and locking arrangement complete all as specified and directed by the engr in charge (make Syntex/Rino)

Disconnecting existing tanks setting aside (or lowering if required ) for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc and reconnecting and refixing in position of 500 lts capacity PVC water tanks complete all as specified and as directed.

Disconnecting existing tanks setting aside (or lowering if required ) for cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipes etc and reconnecting and refixing in position of exceeding 500 lts and not exceeding 1000 Ltrs capacity PVC water tanks complete all as specified and as directed.

Attending minor complaints of joinery such as wooden /steel/aluminium of any description including pelmet box, cupboards, drawers and like door springs, rolling shutters etc, requiring carpentry work like adjusting easing, cutting , pinning, welding and finally making good etc and functioning to seating over with each other with tightening of screws/nails, door and helical springs, door closures etc;, including petty repairs material like screws/nails, plug, grease etc;, to make it functional as in day to day maintenance work complete all as specified and as directed.

Attending the minor complaints of plumbing and sanitary fittings including water leakage from taps, WCs, flushing systems, urinals, wash basins, flush pipes, bottle traps , tanks delivery pipe lines etc and any obstruction to water supply in rooms/Qtrs requiring plumber work with minor stores such as replacement of brass spindles, M seal, screws, nailing, washers, check nuts, short pieces, union, elbows, tightening fittings of flushing cistern etc;, complete all as specified and as directed.

ARK Enterprises (BID ID -3104851)

SWIFTTECH ENGINEERS INDIA PVT LIMITED (BID ID -3103722)

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3103903)

YOGAA MANPOWER AGENCY (BID ID -3103478)

Sri Aruna Associates (BID ID -3103225)

SIRITEL SYSTEMS PRIVATE LIMITED (BID ID -3104797)