NIT No. 23 (2019-20) Item no. 27

Supply of MCB 63 Amp FP, C-series. Make :-Havells/L&T/C&S/DJB approved makes.

Supply of MCB 63 Amp DP, C-series. Make :-Havells/L&T/C&S/DJB approved makes.

Supply of MCB sheet steel enclosure for above MCB. Make :-Havells/L&T/C&S/DJB approved makes.

Providing & fixing of LED glass batten of 18W with proper electric connections at a position indicated by Engineer-in-charge. Make :-Havells/Bajaj/Crompton/DJB approved makes.

Providing & fixing of LED lamp 9 Watt with holder i/c proper electric connections at a position indicated by Engineer-in-charge. Make :-Havells/Bajaj/Crompton/DJB approved makes.

Providing and Fixing of Ceiling Fans 1200 mm along with regulator & all necessary hardware items required to complete the job at site. Work includes arranging all tools and tackles required as per site requirement. Make :-Havells/Bajaj/Crompton/DJB approved makes.

Providing and fixing of 18 Watt Recess mounted 2x2 LED luminaries complete at a position indicated by Engineer-in-charge. Work includes making electric connection and fixing the LED with tools and tackles and other necessary hardware items required to complete the job. Make :-Havells/Bajaj/Crompton/DJB approved makes.

Providing & fixing of Wall Fan Swing type of sweep 400 mm. Make :-Havells/Bajaj/Crompton/DJB approved makes.

Supply of 120 watt energy saving & environmental friendly long life Versatile Pressure die cast aluminum housing LED Street light luminaries complete fittings. Make :-Philips/ Havells/Bajaj/Crompton.

Supply of 4X25 sq. mm PVC insulated & PVC sheathed Aluminium armoured conductor cable. Make :-Grandley/Gloster/CCI/ICC/Universal/DJB approved makes.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm.

Fixing of above 120 Watt LED lights on the existing street light pole making connection with above 25x4 sq. mm cable with all necessary tools & tackles, extendable ladder, as per site requirement. Work including making connection from MCB to LED light with wire of 1.5 sq. mm or as required.

Making the electric connection with the MCB taken above for the existing street light pole 120 Watt LED light and 72 Watt LED light, with all necessary hardware items required to complete the job.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. DSR 2018 2x1.5 sq. mm + 1x1.5 sq. mm earth wire.

2x2.5 sq. mm + 1x2.5 sq. mm earth wire.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 5/6 amps switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. DSR 2018

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) DSR 2018 2.5 4 way (4 + 12), Double door

Supplying and fixing of 5A to 32A rating, 240/415 Volts, 10 KA,"C" curve Miniature circuit breaker suitable for inductive load of the following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. DSR 2.10.1 Single Pole.

Double pole

Triple Pole

Triple Pole and neutral

Providing /fixing of 72Watt LED light complete fitting with MS bend, junction Box and clamp complete, Fasteners and other necessary hardware items required to complete the job with wiring from junction box to LED and surface cable laying with proper clamps at site. Make of 72 W LED: Bajaj/Crompton/Philips/Havells.

Painting of existing street light poles with the two coats of Enamel paint with complete satisfaction of Engineer-in-charge.

Testing & commissioning of complete work in the presence of Engineer-in-charge with full satisfaction.

RISHABH ENGINEERS

SANJAY SALES CORPORATION