Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.9 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹14.7 L+₹1.5 L (11.7%)Rejected-AOC | L2 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 3 | L3₹15.4 L+₹2.2 L (16.7%)Rejected-AOC | L3 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 4 | L4₹16.0 L+₹2.8 L (21.6%)Rejected-AOC | L4 | Rejected-AOC OTHER THAN LOWEST BIDDER | |
| 5 | L5₹17.2 L+₹4.1 L (30.8%)Rejected-AOC | L5 | Rejected-AOC OTHER THAN LOWEST BIDDER |
Tender Value
Refer Docs
EMD Value
₹24,000
Closing Date
28 Mar 2020, 6:00 pmClosed
GE of GE (SOUTH) AKHNOOR
GE SOUTH AKHNOOR C/O 56 APO PIN- 900234
REPAIR TO PUMP SETS, MOTORS, VOLTAGE STABILIZERS, MISC EQUIPMENTS INSTALLED AND SERVICING OF DG SET AT WATER SUPPLY INSTALLATIONS AT AKHNOOR AREA UNDER GE (SOUTH) AKHNOOR.
2020_MES_335163_1
NIT-50
Open Tender
Miscellaneous Works
Item Rate
180 days
RAKHMUTHI AREA
Class E and Category a(ii)
8 documents required · 8 mandatory
₹500
GE SOUTH AKHNOOR
₹24,000
Yes
17 Jun 2020
18 Mar 2020
30 Mar 2020
18 Mar 2020
28 Mar 2020
23 Mar 2020
Amount
SCHEDULE 'A' PART-I : BOQ OF WORKS FOR E/M WORKS.
Dismantling or taking up defective/ damaged submersible pump sets with lowering pipe, flange or any type and any size of any depth with pump set of any capacities by manual or mechanical means after disconnecting the all electric connections from LT panel or starter and transport to workshop for repair and workshop to sites after repairing, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of tools and plants for taking out, minor spare parts such as nuts, bolt, washers, lubricants and transportation to workshop shall be deemed included in quoted rate.
De-assemble submersible pumps of capacities 20 HP to 55 HP, discharge 7500 to 35000 gallons per hours and 90 Mtrs head height, for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, transportation to workshop shall be deemed included in quoted rate.
Supply only following new spare parts required for replacement for repairsubmersible pumps of capacities 20 HP to 55 HP, discharge 7500 to 35000 gallons per hours and 120 Mtrs head height :-
Gun metal impellers
Gun metal bushes
Stainless steel shaft/ distance sleeve.
Neck ring Gun metal
Pump and motor stainless steel coupling
Key stainless steel for coupling
Thrust plate set
Cable seal rubber
Gun metal stud and nuts for connection piece
Cast iron bowl assembly
Repair to pump shaft to its original shape by remetaling, turning, cutting and grinding.
Repair to rotor assembly to its original shape by remetaling, turning, cutting and grinding.
De-assemble submersible pump of capacity 5.0 HP, for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, transportation to workshop shall be deemed included in quoted rate.
Supply only following new spare parts required for replacement for repairsubmersible pump of capacity 5.0 HP :-
Gun metal impellers
Gun metal bushes
Stainless steel shaft/ distance sleeve.
Neck ring Gun metal
Pump and motor stainless steel coupling
Key stainless steel for coupling
Thrust plate set
Cable seal rubber
Stainless steel rotor shaft/ bush sleeve with bronz bush
Cast iron bowl assembly
T-bolt of motor
Repair to pump shaft to its original shape by remetaling, turning, cutting and grinding.
Repair to rotor assembly to its original shape by remetaling, turning, cutting and grinding.
Disconnecting all electric, water supply and coupling connections between motor, centrifugal pump, capacity 100 HP/ 125HP and delivery line including de-assemble and removal from foundation, of defective centrifugal pumps by mechanical or manual means including gland assembly/ housing, any capacity and type, for repairing transportion to workshop if required, and re-assembling, installation, commissioning after necessary repair/ replacement of old defective/ damaged spare parts and greasing to different parts, testing the same pump on full load including one coat of spray painting on outer surfaces, matching to existing colour, writing SM/ MES No. and date of servicing/ repair with white paint, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of tools and plants for taking out, minor spare parts such as nuts, bolt, washers, lubricants and transportation to workshop shall be deemed included in quoted rate.
Disconnecting all electric, water supply and coupling connections between motor, centrifugal pump, capacity 5HP and delivery line including de-assemble and removal from foundation, of defective centrifugal pumps by mechanical or manual means including gland assembly/ housing, any capacity and type, for repairing transportation to workshop if required, and re-assembling, installation, commissioning after necessary repair/ replacement of old defective/ damaged spare parts and greasing to different parts, testing the same pump on full load including one coat of spray painting on outer surfaces, matching to existing colour, writing SM/ MES No. and date of servicing/ repair with white paint, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of tools and plants for taking out, minor spare parts such as nuts, bolt, washers, lubricants and transportation to workshop shall be deemed included in quoted rate.
De-assemble centrifugal pumps of capacities 100 HP/ 125 HP, discharge 25000 gallons per hours and 500 feet head height, for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, transportation to workshop shall be deemed included in quoted rate.
Supply only following new spare parts required for replacement for repair of centrifugal pumps of capacities 100 HP/ 125 HP, discharge 25000 gallons per hours and 500 feet head height :-
Cast iron impeller
Neck ring Gun metal
Body bush gun metal
Cast iron diffuser rings
Bearing housing
Cast iron gland bush
Gun metal lubricating pipe
Ball bearing of existing specifications, ISI marked.
Stay rod iron
Coupling set with plate, bush, nuts, bolts and washers
Key stainless steel for coupling
Air release valve/ cock of brass
Repair to pump shaft to its original shape by remetaling, turning, cutting and grinding and making bearing/ bush housing
De-assemble centrifugal pumps of capacity 5 HP, for repair and re-assembling the same after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, transportation to workshop shall be deemed included in quoted rate.
Supply only following new spare parts required for replacement for repair of centrifugal pump of capacity 5 HP :-
Cast iron impeller
Neck ring Gun metal
Body bush gun metal
Cast iron diffuser rings
Bearing housing
Cast iron gland bush
Gun metal lubricating pipe
Ball bearing of existing specifications, ISI marked.
Stay rod iron
Coupling set with plate, bush, nuts, bolts and washers
Key stainless steel for coupling
Repair to pump shaft to its original shape by remetaling, turning, cutting and grinding and making bearing/ bush housing
Disconnecting to all electric connections from LT panel and motor for repair of motor starter of 50 HP/ 75 HP, star-delta starter, automatic unmanned type suitable for centrifugal/ submersible pumps, transportation to workshop and re-installation the same at site after necessary repair/ replacement of old defective/ damaged spare parts such as contactors, relays, of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, minor spare parts such as copper wire, lubricants and transportation to workshop shall be deemed included in quoted rate.
Supply only following new spare parts required for replacement for repair of motor starter of 50 HP to 75 HP suitable for centrifugal pumps :-
Contactor, triple pole, capacities 70 Amps to 110 Amps.
Globe indicator set (RYB)
Overload relay
Single phase protection relay.
Copper lugs suitable for copper cable 25.0 Sqmm size.
Toggle button having on/ off position.
Disconnecting electric connections from alternator and fuel connection from engine decoupling of engine and alternator for repair, strip opening and de-assembling of engine for repair including dismantling of radiator, radiator fan, water pump assembly, air cleaner, fuel filter by opening nuts bolts including wiring of stare assembly if required, of DG set capacity 100 KVA to 125 KVA and replacement of old defective spare parts with new spare parts as mentioned here-in-after, including any type of machine work required at site/ workshop to compete the repair including complete servicing the engine all as required at site, re-assembling the engine in existing position complete and testing on completion all as specified and as directed by Engineer-In-Charge. Make of Engine and Alternator: SM No: Note: (a) New spare parts for engine will be measured and paid separately as supply only under the respective items. (b) Cost of cleaning, welding, minor repair and special tools and plants required for dismantling engine will deemed to be included in quoted rates.
Supply only following new spare parts required for repair of DG Set capacity 100 KVA to 125 KVA :-
Fuel Filter.
Oil Filter.
Air Filter.
Coupling rubber with assembly.
Fan belt.
Hose pipe set.
Carbon bush of alternator.
Carbon bush holder of alternator.
Ball bearing of alternator.
Slip rings assembly of alternator.
Replacement of old damaged/ unserviceable electronic rectifier/ Automatic Voltage Rectifier with new electronic rectifier/ Automatic Voltage Rectifier suitable for DG set capacity 100 KVA to 125 KVA, complete all as specified and as directed by Engineer-In-Charge.
Repair, calibration, checking and pressure testing of fuel injector pump including replacement of damaged/ defective parts such as delivery valve, plunger gasket kit, barrel and washers and testing whole assembly after necessary repair and fixing in engine, complete all as specified and as directed by Engineer-In-Charge.
De-assembling of radiator of DG set capacity 100 KVA to 125 KVA, for cleaning and repair, using ‘K’ oil and radiator cleaning solution hydro-chloric acid by pressure of pump/ caustic soda with wire brush and necessary welding/ brazing of water tubes/ fins, whichever is required for cleaning and repairing, complete all as specified and as directed by Engineer-In-Charge.
Repair and overhauling of existing self starter, capacity 12 Volts/ 24 Volts of any diesel generator set including transportion to workshop for any repair and installation back to same DG set and replacing defective spare parts with new spare parts such as re-winding of armature, pinion, carbon bushes, field coil, including any type of machine work required at site/ workshop to compete the repair including complete servicing all as required at site, re-assembling in existing position complete and testing on completion all as specified and as directed by Engineer-In-Charge. Note: Cost spare parts shall be deemed included in quoted rate of item.
Supply only engine oil/ lubricant, 20 W 40 grade, suitable for diesel engine of DG set of any capacity and any make, complete all as specified and as directed by Engineer-In-Charge.
Replacement of old unserviceable/ damaged battery with new storage cell lead acid type 12 Volts, 150 AH including lead terminals and copper thimble for making necessary connections, complete all as specified and as directed by Engineer-In-Charge.
Supply only copper lead cable 1.50mtrs long, multi-stranded, with copper thimble for making necessary connections at both ends, suitable for 12/ 24 Volts battery including copper nuts, bolts and washers, complete all as specified and as directed by Engineer-In-Charge.
Replacement of old unserviceable semi conductor fuse panel with new fuse panel having three Nos of semi-conductors fuse, capacity 630 Amps including panel box, installation, commissioning and testing on full load after repairs, complete all as specified and directed by Engineer-In-Charge.
Replacement of old damaged/ unserviceable coppercable with new cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 120.0 Sqmm, single, conforming to relevant IS specifications including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed by Engineer-In-Charge.
Supply only mild steel water tubing, size 100mm bore, conforming to IS: 1239 (Part-I)/ 2004, medium grade, wall thickness 4.50mm, suitable for column pipe in submersible pumps, length of pipe not less than 3.0mtrs, with provision of mild steel flanged at both ends or internelly threaded at one end and externally threaded another end, complete all as specified and directed by Engineer-In-Charge.
Supply only mild steel water tubing, size 150mm bore, conforming to IS: 1239 (Part-I)/ 2004, medium grade, wall thickness 4.85mm, suitable for column pipe in submersible pumps, length of pipe not less than 3.0mtrs, with provision of mild steel flanged at both ends or internelly threaded at one end and externally threaded another end, complete all as specified and directed by Engineer-In-Charge.
Replacement of old damaged/ unserviceable submersible cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 25.0 Sqmm, 3-core, conforming to IS: 694/1990 including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed.
Replacement of old damaged/ unserviceable submersible cable with new submersible cable, flat, PVC insulated and PVC sheathed copper conductor, multi-stranded, 16.0 Sqmm, 3-core, conforming to IS: 694/1990 including making connection to both ends i.e. motor side and starter side with jointing materials, complete all as specified and directed.
Rewinding of burnt/ damaged motor of submersible pumps of capacities 5 HP, 20 HP, 45 HP and 55 HP of any discharge capacity with water proof, annealed solid copper conductor wire of existing specifications, insulating materials, ISI marked or as per IE specifications and cleaning, preparation of stator for rewinding, complete all as specified and directed by Engineer-In-Charge.
Rewinding of burnt/ damaged induction motor of centrifugal pumps of capacities 5 HP, 100 HP/ 125HP, of any discharge capacity with water proof, annealed solid copper conductor wire of existing specifications, insulating materials, ISI marked or as per IE specifications and cleaning, preparation of stator for rewinding, complete all as specified and directed by Engineer-In-Charge.
Lowering down, commissioning back to tube well of submersible pump sets with lowering pipe, flange or any type and any size of any depth with pump set of any capacities by manual or mechanical means including making necessary electric connections with LT panel or starter and testing on full load after repairs, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of tools and plants for taking out, minor spare parts such as nuts, bolt, washers, lubricants shall be deemed included in quoted rate.
Replacement of old unserviceable/ damaged MCCB with new MCCB, four pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 125 Amps with breaking capacity 25 KA, having indicating lamp, Ics=100% and Icu as per IEC 60947-2, complete all as specified and as directed by Engineer-In-Charge. Make: ABB cat part No- 1SDA067409R1 or equivalent in L&T/ Legrand/ Merlin Gerin/ Siemens.
Disconnecting electric connections of servo voltage stabilizers, capacity 15 KVA to 30 KVA, draining out the transformer oil in clean barrels for re-use, cleaning of sludge from oil tank and transporting to workshop for repairs and return back to it's original position after repairs including loading and unloading by mechenical means, complete all as specified and as directed by Engineer-In-Charge. Note: Spares required for repair/ replacement of unserviceable parts shall be measured and paid separately under relevant items of BOQ.
Description all as serial item No- 35.00 here-in-before but for servo voltage stabilizer of capacity exceeding 30 KVA but not exceeding 60 KVA capacity.
Description all as serial item No- 35.00 here-in-before but for servo voltage stabilizer of capacity exceeding 60 KVA but not exceeding 100 KVA capacity.
Replacement of old unserviceable Printed Circuit Board (PCB) with new Printed Circuit Board (PCB) of voltage stabilizer as per existing make and type, capacity 15 KVA to 30 KVA, complete all as specified and as directed by Engineer-In-Charge.
Description all as serial item No- 38.00 here-in-before but for servo voltage stabilizer of capacity exceeding 30 KVA but not exceeding 60 KVA capacity.
Description all as serial item No- 38.00 here-in-before but forservo voltage stabilizer of capacity exceeding 60 KVA but not exceeding 100 KVA capacity.
Replacement of old unserviceable carbon bushes with new carbon bushes of voltage stabilizer as per existing make and type, capacity 15 KVA to 30 KVA, complete all as specified and as directed by Engineer-In-Charge.
Description all as serial item No- 41.00 here-in-before but for servo voltage stabilizer of capacity exceeding 30 KVA but not exceeding 60 KVA capacity.
Description all as serial item No- 41.00 here-in-before but for servo voltage stabilizer of capacity exceeding 60 KVA but not exceeding 100 KVA capacity.
Replacement of old unserviceable servo motor with new servo motor of voltage stabilizer as per existing make and type, capacity 15 KVA to 30 KVA, complete all as specified and as directed by Engineer-In-Charge.
Description all as serial item No- 44.00 here-in-before but for voltage stabilizer of capacity exceeding 30 KVA but not exceeding 60 KVA capacity.
Description all as serial item No- 44.00 here-in-before but for voltage stabilizer of capacity exceeding 60 KVA but not exceeding 100 KVA capacity.
Replacement of old unserviceable/ damaged Change over switch with new Change over switch, off load, rating 200 Amps, four poles, 415 Volts, AC, 50 Hz, with side handle, conforms to IS:13947 (Part-3); IEC:60947-2, complete all as specified and as directed by Engineer-In-Charge. Make: Indo-Asian cat part No- OFFP0200 or equivalent in L&T/ Legrand/ Merlin Gerin/ Siemens.
Replacement of old unserviceable/ damaged Change over switch with new Change over switch, on load, rating 100 Amps, four poles, 415 Volts, AC, 50 Hz, with side handle, conforms to IS:13947 (Part-3); IEC:60947-2, complete all as specified and as directed by Engineer-In-Charge. Make: Indo-Asian cat part No- OFFP0100 or equivalent in L&T/ Legrand/ Merlin Gerin/ Siemens.
Disconnecting to all electric connections from LT panel and motor for repair of motor starter of 40 HP to 55 HP, star-delta starter, automatic type suitable for centrifugal pumps, transportation to workshop and re-installation the same at site after necessary repair/ replacement of old defective/ damaged spare parts of existing makes and specifications, complete all as specified and directed by Engineer-In-Charge. Note: (i) Cost of new spare parts will be measured and paid separately under respective items. (ii) Cost of tools and plants, minor spare parts such as copper wire, lubricants and transportation to workshop shall be deemed included in quoted rate.
Supply only following new spare parts required for replacement for repair of motor starter of 40 HP to 55 HP suitable for centrifugal pumps :-
Contactor, triple pole, capacities 50 Amps to 110 Amps.
Globe indicator set (RYB)
Overload relay
Single phase protection relay.
Copper lugs suitable for copper cable 25.0 Sqmm size.
Toggle button having on/ off position.
Replacement of old unserviceable/ damaged MCCB with new MCCB, three pole, 415 Volts, adjustable thermal and adjustable magnetic setting, 200 Amps with breaking capacity 25 KA, having indicating lamp, Ics=100% Icu as per IEC 60947-2, complete all as specified and as directed by Engineer-In-Charge. Make: Schneider cat part No- LV431121 or equivalent in in L&T/ Legrand/ ABB/ Merlin Gerin/ Siemens.
Supply only coolant fluid suitable for radiator of DG sets of any capacity and any make, complete all as specified and as directed by Engineer-In-Charge.
Amount of Schedule of credit of for Rs 1,30,145.00 shall be deducted from quoted amount.
M/S BIJRAL ENTERPRISES
M/S CJ CONSTRUCTIONS
THE PERFECT WATER SUPPLY SERVICES
M/S SHARMA ENTERPRISES
M/S ANMOL TRADING CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .