Procurement of Textile Technology Laboratory Machines

Amount

Textile Technology Laboratory Machines

LABORATORY HIGH TEMPERATURE STEAMER Specification: The machine must be able to perform the following processes: 1. Drying, Curing and Thermo Setting with Hot air 2. High temperature steaming at atmospheric pressure and temperature 3. Saturated Steaming • Fabric transportation on a frame with pins • Adjustable position of the pins on the frame for different size of samples • Sample size 425 mm x 350 mm • Dwell time 6 seconds to 99 minutes • Motorised arrangement must be provided for inserting / removing the frame from the chamber • Automatic ejection of the pin frame from the hot zone on completion of the dwell time • Temperature for Saturated Steaming 102°C • Temperature for Super Heated Steam 185°C • Temperature with Hot air 210°C • High quality insulation on the inner body to limit the heat losses • High efficiency blower for Hot air recirculation • Electrical heating for steam generation and Hot air • Heater capacity 12 Kw • Heating control Digital temperature indicator controller • Automatic water level control • Electrical supply 415V AC, 3 Phase, 50 Hz • Machine dimensions W 1300mm x H 1600mm x D 1200mm • Basic material of construction SS 304 and Control unit SS or MS

OPEN BATH BEAKER DYEING MACHINE  Beaker capacity 500ml  No. of beakers 12  Rocking bars arrangement must be provided with Stroke length Adjustable from 25mm to 50mm  Rocking bars rotation 60 rpm and above, apart from up and down motion, Rocking bars must be able to provide direction reversal every 3 minutes  Rocking bars must be able to work for fabric, yarn, fibre  Automation through programmable logical controller S-121  Temperature up to 95°C or boiling  Heating medium water  Cooling provision must be provided  Heating load (approx.) 6 KW  Electric supply 415 V, 3 Φ  Material of construction SS 316 for Beakers, other parts SS-304 & control unit MS Powder Coated  Approx weight 93 Kg  Machine Dimension L 1000mm x W 325mm x H 1040mm

WATER BATH SHAKER MACHINE: Specification:  Inside Chamber Size 22 X 22 Inch.  No. flask 16 flask with air tight lid.  Flask SS316  Flask volume 500 ml  Inside SS316 out Side SS304  Outer Dimension 3 Feet X 3 Feet Approx.  Temperature Controller and RPM Meter.  Max Temperature 95°C or boiling  Beaker volume  Power supply single phase

ADVANCE INSTRUMENTS

INFOSYSTEMS

B.D.ELECTRICALS