Providing of Sanitary Installation and Internal Water Supply in PHC Building at Lower Gadigarh Jammu

Amount

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level white PVC flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required of Cera, Parryware, Hindware or equivalent make as approved by Engineer-in-charge White Vitreous China Orrisa patern W.C pan of size 580x440 with integral type foot rests.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brakets, cutting and making good the wafls and floors wherever required: Range of two urinal basins with 5 litre P.V.C white automatic flushing cistern of approved quality.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China wash basin size 550x400 mm with single 15 mm C.P. brass pillar taps.

Providing and fixing Salem Stainless Steel AISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required. 610x460mm bowl depth 200mm.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 32mm dia.

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453 x 357mm (outer dimensions).

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 1500x450 mm.

Providing and fixing toilet paper holder C.P. brass.

Providing and fixing PTMT Waste Coupling for wash basin and sink of approved quality and colour. Waste coupling 31mm of 79mm length and 62mm breadth weighing not less than 45 grams.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighing not less than 88 gms.

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc.

15mm dia nominal bore (Medium).

20mm dia nominal bore (Medium).

25mm dia nominal bore (Medium).

Concealed pipe including painting with anti-corrosive bitumastic paint, cutting chases and making good the wall.

15mm dia nominal bore.

20mm dia nominal bore.

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 15 mm dia. Gl pipe

15 mm dia. Gl pipe (Medium)

20 mm dia. Gl pipe (Medium)

25 mm dia. Gl pipe (Medium)

Painting G.l. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.

15 mm diameter pipe.

20 mm diameter pipe.

25 mm diameter pipe.

Providing and fixing G.I Union in G.I pipe including cutting and threading the pipe and making long screws etc. complete (new work).

15mm nominal bore.

20mm nominal bore.

25mm nominal bore.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Sintex, Electroplast, star, Lotous or equivalent having valid ISI license).

Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931. 15mm nominal bore.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore.

Providing and fixing C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931. 15 mm nominal bore.

Providing and fixing gun metal gate valve with C.l. wheel of approved quality (screwed end) 25 mm nominal bore.

Providing and fixing ball valve (brass) of approved quality complete. High or low pressure with plastic floats. 15mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931. 15 mm nominal bore.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. Inside size 90x80 em and 45 cm deep including C.l. cover with frame (light duty) 455x610mm.internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) With F.P.S. bricks with class esignation 75 & with Crushed stone aggregate.

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C. top slab with 1 :2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete as per standard design. Inside size 90x80 em and 60 cm deep including C.l. cover with frame (light duty) 455x610 mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) with F.P.S. bricks with class esignation 75 & with Crushed stone aggregate.

Providing and fixing C.P. brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg.15mm nominal bore of standard back type.

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 gradedstone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.

Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba.

Providing and fixing UPVC single socketed pipes including collars etc. working pressure of 4 kg/sqm) of approved make like supreme, finolex prince or equivalent in proper line / alignment/gradient including jointing etc. complete with recommended adhesive colur seal ring.

75mm dia.

110mm dia.

150mm dia.

Providing and fixing PVC fittings and accessories etc. complete with adhesives (Coupler).

75mm dia.

110mm dia.

150mm dia.

Providing and fixing PVC fittings and accessories etc. complete with adhesives (Single equal Tee without door).

Providing and fixing PVC fittings and accessories etc. complete with adhesives (Single equal Tee with door).

Providing and fixing PVC fittings and accessories etc. complete with adhesives (Bend 87.5 Degree).

75mm dia.

110mm dia.

150mm dia.

Providing and fixing motor boosting pump of Kirloskar, Sharp or equivalent make with necessary G.I fittings (Nipples, Unions, Sockets, Reducers & Stop cocks etc.).

Pipe clips.

ROHIT KUMAR