Supply of GLF Spares at LBSI Airport, Varanasi

Amount

Supply of isolating transformers of following rating of 5 KV grade, 50Hz, series type , encapsulated in polyester resin finally moulded with neoprene rubber with primary & secondary connections as specified in particular specifications, complete as required: a)200W, 6.6/6.6A

Supply of Bi-pin halogen lamp 200W, 6.6A suitable for MIRL/HIRL fitting complete as per site requirement. Make: Osram Cat No.64386 or equivalent as per approved make of AAI.

Supply of 40 W Inset lamp suitable for MIRL/HIRL fitting complete as per site requirement. Make:Osram Cat No.64333 B 40-15 or equivalent as per approved make of AAI..

Supply of halogen lamp wih inbuilt holder of 105W, 6.6A, MR type Suitable for Inset Runway edge light fitting. Model-64339 A 105-6.6, Make-Osram or equivalent as per approved make of AAI.

Supply of 1 watt LED module with electronic driver etc suitable for LED Taxi light fitting ,15 watt 6.6/6.6 isolating transformer complete as required as per site requirement.

Supply of Runway Lamp holder suitable for 200 W bi pin Halogen Lamp complete as required as per site requirement.

Supply of LED strip for LED based airfield signages suitable to be operated oninput source of 2.5 amp to 6.6 amp constant current, 20V-25 V DC supply compatible for Taxiway signboards complete as per site requirement.

Supply of 80 W maximum Constant Intensity Electronic Converters for LED based airfield signages with inbuilt change over relay from ckt 1 to ckt 2 for Taxi Signboard to be operated on input source of 2.5 amp to 6.6 amp constant current, complete as per site requirement.

Supply of bi-directional elevated type high intensity light fitting suitable for Runway Lighting use complete with lamp holder, 200W/6.6 Amps halogen lamp, glass, filter, holding mechanism reflector assembly elevation, breakable coupling , mounting assembly , gaskets, and two pin secondary lead plug of 100 cm. long suitable for connection with isolating transformer , and other accessories etc, and conforming to ICAO/CAR requirements. Make- Thorn or equivalent as per approved make of AAI.

Supply of Clear glass suitable for elevated type 200 W/6.6 Amp Thorn Make Runway Light Fitting complete as per site requirement.

Supply of 180 degree RED filter lense suitable for 200 W Thorn make elevated type Runway fittng as per site requirement.

Supply of 180 degree YELLOW filter lense suitable for 200 W Thorn make elevated type Runway fittng as per site requirement.

Supply of PAPI Check Stick Base Plate

Supply of Red Filter suitable for AMA make PAPI Fitting as per site requirement.

Supply of Clear Lense suitable for AMA make PAPI Fitting as per site requirement.

Supply of upper and lower Breakable Coupling suitable for AMA make PAPI Fitting as per site requirement.

Supply of 5 KV grade plug and receptacle of type 1 class B connector suitable for 5 KV grade PVC insulated PVC sheathed single core 1X 16 sq mm copper conductor cable confirming to the specified specification etc complete as required.

Supply of 5 KV grade plug and receptacle of type 1 class B connector suitable for 5 KV grade PVC insulated PVC sheathed single core 1X 6 sq mm copper conductor cable confirming to the specified specification etc complete as required.

Supply of following size heat shrinkable straight through joint etc for AFL cable complete as required. (a)1X 6 Sqmm

Supply of following size heat shrinkable straight through joint etc for AFL cable complete as required. (a)1X 16 Sqmm

Supply of M -10 SS Hardware bolts,washers suitable for runway base plate.(one set consists of 6 nos. bolts, washers)

Supply of HT tape (25 mm* 9mtr ) complete as required as per site requirement.

Supply of 9 Watts LED Bulb, 230V,50Hz, AC supply suitable for normal holder.

Bafna Electric Corp

ASHOK KUMAR

Manish Electricals