PERIODICAL SERVICES IN VARIOUS BUILDINGS IN MES AREA, REPAIRS/MAINT OF JOINERIES AND CONNECTED WORKS IN MES AREA, REPAIRS/MAINT OF SANITARY FITTINGS, PLUMBING AND FLOORS OF WASHROOM IN MES AREA, REPAIR/ MAINT INCL REPLACEMENT OF DAMAGED LT UG CABLES

Amount

M&L for preparation of old decorated plastered surfaces of wall including cornices etc. brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash, complete all as specified and directed.

All as per item No. 1.00 here-in-before but applying one coat of white wash on ceiling, complete all as specified and directed.

All as per item No. 1.00 here-in-before but applying two coats of white wash, complete all as specified and directed.

All as per item No. 1.00 here-in-before but applying two coats of white wash on ceiling, complete all as specified and directed.

All as per srl item No. 1.00 here-in-before but applying one coat of oil bound distemper on wall, complete all as specified and as directed.

All as per item No. 1.00 here-in-before but applying one coat of exterior emulsion paint on old decorated plaster surfaces of walls/chajjas/band/facia/balcony etc, complete all as specified and as directed.

M&L for complete removal of existing treatment of old decorated plastered surfaces of wall including preparation of surfaces by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper on wall, complete all as specified and directed.

M&L for preparing of previously painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M&L for preparing of previously painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and as directed.

Writing letters or figures (block, roman, italic or Indian) exc. 15cm and n. exc. 30cm high, complete all as specified and as directed.

Taking down cement plaster on brick/concrete surfaces of any description in any position incl racking out joints, hacking for key, scrubbing down with water etc and removing rubish off the premises, complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete, surfaces, of wall in CM (1:6), finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete, surfaces of wall in CM (1:4), mixed with water proofing compound as per manfacturers instration and finished even and smooth without using extra cement, complete all as specified and directed. (Note: WPC shall be measured and paid seperately against respective item as suppy only.)

Supply only liquid water proofing compound of approved make (ISI marked), complete all as specified and directed.

M&L for preparation of new plastered surfaces wall surfaces and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each., complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm but n.exc 2 Sqm each, complete all as specified and directed.

Taking down shutters shutter of any description ex.c 1 Sqm but n.exc 2 Sqm each and refixing in same opening, complete all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. including powder coating (minimum thickness of powder coating 50 micron), complete all as specified and directed.

M&L for anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. powder coating of any colour (thickness or powder coating not less than 50 micron), complete all as specified and directed.

M&L for box type steel window side with hung double shutters with provision for desert cooler/AC (inside for wire mesh & out síde for glass), includíng guard bar,hinges, steel handle, tower bolt and steel peg stay, complete with glazing bar dovetailed or welded including a coat of red oxide primer after preparation of surfaces, and fixed, steel window shall be conforming to relevant IS, complete all as specified and directed. Note:-Wire mesh and sheet glass shall be measured and paid separately.

M &L for box type steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hínges, steel handle, tower bolt and steel peg stay, complete with glazing bar dovetailed or welded including a coat of red oxide primer after preparation of surface before fixing, steel ventilator shall be conforming to relevant IS, complete all as specified and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately.

M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), over a coat of red oxide primer, complete all as specified and directed.

S&F in repairs 12mm thick prelaminated particle board, exterior grade prelaminated one sides with decorative choice lamination and on other side balancing white lamination, fixed with screws to timber frame work/mild steel framing, complete all as specified and directed.

S&F pressed steel frames for doors, factory made, thickness of frame 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, lock strike plate, hinges etc complete, size of frame 125x60mm, complete all as specified and directed.

S&F pressed steel frames for doors, factory made, thickness of frame 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, lock strike plate, hinges etc complete, size of frame 105x60mm, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixing in opening as per specification, complete all as specified and directed.

S&F factory made panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes and bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struct inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rail with suitable PVC sheet beading and jointed together with solvent cement at site, complete all as specified and directed.

S&F mild steel holdfast made up of FI 25 x 3mm conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

S&F 35mm thick (factory made), 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as specified and directed.

S&F 35mm thick factory made glazed and skelton shutters of 2nd class hardwood open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass/guage etc, complete all as specified and directed.

S&F 100mm size mild steel butt hinges medium weight cold rolled, complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section, complete all as specified and directed.

S&F 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21, complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodised, complete all as specified and directed.

S&F in repairs, mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of length of bolt of 250mm, complete all as specified and directed.

S&F aluminium alloy, anodised,sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

M&L for preparation of wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.

S&F aluminium mortice lock, vertical type, size 100mm (2 levers), complete all as specified and directed.

S&F aluminium mortice lock, vertical type, size 75mm (2 levers), complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors or windows with necessary nails and fillets), complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm as in doors or windows with necessary nails and fillets), complete all as specified and directed.

Hacking out old broken glass (any thickness,size,quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S & F 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm each pane, complete all as specified and directed.

S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutter of 851 to 1000mm in width & of weight between 61 to 81 kg, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 300x200x7mm/450x300 x7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar, complete all as specified and directed

M & L for 25mm thick PCC (1:2:4), type B-0, (using 12.5mm graded crushed stone aggregate), as in sub base for flooring etc., complete all as specified and directed.

M&L for non skid ceramic coloured tiles, light shade 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

S&F in repair vitreous china squatting pan, ‘orissa’ pattern, size 630x 450mm white, with integral foot rests, and lime concrete bedding etc. (excluding flushing cistern and flush pipe), complete all as specified and directed

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let, ball valve, float and handle, complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure, screwed for iron pipe & fixed (minimum weight 90gms), complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connection, complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connection including cleaning for refixing or removal to store, complete all as specified and directed.

S&F GI tubes of 15mm bore medium grade with all fitting and fixed complete to walIs and ceilings or laid in floors, complete all as specified and directed.

S&F 20mm dia CPVC pipes SDR-13.5 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, End plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F 25mm dia CPVC pipes SDR-13.5 & plain CPVC, SDR 11, fittings complete on wall/floor/roof terece with necessary saddle/clamps including all necessay fittings, like elbow, tee, socket, reducer, bushings, end caps, End plugs, etc and with CPVC solvents cement, complete all as specified and directed.

S&F in repair pillar taps 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed fency type, complete all as specified and directed.

S&F in repairs bib tap 15mm bore, fancy type, chromium plated, with crutch or butterfly handle, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F in repairs 15mm bore, fancy type, chromium plated, stop valves, concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repairs 15mm bore angle valve, cast copper alloy, chromium plated, screwed down, high pressure, screwed both ends for iron pipes or for unions, complete all as specified and directed.

S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints including fixing to 15mm bore steel pipe or union, complete all as specified and directed.

S&F in repair CP shower arm 15mm bore, 195mm long with bend of 45 degree with flangs, brass, chromium plated, with long head arm for fixing with 15mm bore steel pipe or union, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repair of 32mm size PVC solid waste pipe for wash hand basin and sink 800mm long, complete all as specified and directed.

S&F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank including 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 32mm dia waste pipe of polyethylene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM (1:3) if required, complete all as specified and directed.

S&F in repair curtain rod 25mm dia anodised aluminum chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole/stay, or cable trenches and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 50mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 90mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

S&F GI tubing 40mm bore (light grade) with all fittings for protection of cables, laid in trenches including making good to the distrurbed surface including taking down/up old unserviceable pipe of any description, complete all as specified and directed (Note : Excavation and earth work shall be measured and paid separately)

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core including taking down old unserviceable UG cable of any description, complete all as specified and directed.

All as per item No 87.00 here-in before but 25 Sqmm 4 core, complete all as specified and directed.

All as per item No 87.00 here-in before but 35 Sqmm 4 core, complete all as specified and directed.

All as per item No 87.00 here-in before but 95 Sqmm 3.5 core, complete all as specified and directed.

All as per item No 87.00 here-in before but 120 Sqmm 3.5 core, complete all as specified and directed.

M&L for horizontal boring under the road (with manual method) below 1mtr from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed.

Supply, fabricating, installing, testing and commissioning of outdoor type LT feeder pillar box of suitable size factory fabricated, cubical panel, floor mounted double door, dust and vermin proof CPRI approved made out of 3.15mm thick CRCA sheet mounting on 50x50x5mm angle iron supports at the base duly painted with synthetic enamel paint and panel board with front and back opening and locking arrangement compete including finishing with two coats of powder coated paint of approved shade over one coat of red oxide zinc chrome primer including copper bus bar strip 40mm x 10mm for three phase 4 wire 415 Volts, 50 Hz, AC supply including suitable size copper conductor control wiring, necessary cable glands, lugs etc, proper arrangement for ventilation with and including the following accessories including taking out existing damaged LT panel board/feeder pillar box of any description, complete all as specified and directed :- INCOMING:- (i) MCCB 160 Amps, AC 4 pole 415 Volt 35 KA breaking capacity with microprocessor release range 160 Amp (incomomg and DG set supply) with suitable rotary extendable handle for operation of MCCB - 02 Nos. (ii) On load change over switch 160 Amps, AC 4 pole 415 Volt with suitable rotary extendable handle for operation of change over including connection with copper bus bar 40mm x 10mm from incoming MCCB (Mains and Dg set) - 01 No. OUTGOING:- (i) MCCB 125 Amps, AC 4 pole 415 Volt 27 KA breaking capacity with adjustable thermal and fixed magnetic with suitable rotary extendable handle for operation of MCCB- 02 Nos. (ii) MCCB 63 Amps, AC 4 pole 415 Volt 27 KA breaking capacity with adjustable thermal and fixed magnetic with suitable rotary extendable handle for operation of MCCB- 04 Nos. (iii) MCB SPN 63 Amp- 08 Nos. (v) Digital voltmeter with suitable CT's for incoming. (vi) Digital ammeter with suitable CT's for incoming and each outgoing connection. (vii) Phase indicating lamp LED Type (R-Y-B) for incoming and each outgoing connections.

M & L earthing with GI earth plate electrode of size 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.5m below the normal ground level connected with GI earth strip 25 x 4mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20mm graded crushed stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20mm dia medium grade pipe for watering,40mm dia light grade GI pipe for lead protection in & including alternate layers of char coal dust and common salt complete all as shown in electrical plate No. 3 of SSR Part-I (2009) and connected to earthing test point all as specified and indicated including testing on completion and marking of description of earthing on GI plate including dismantling old u/s earthing of any description, complete all as specified and directed. Note : (i) Proper earthing pit should be provided with pit cover. (ii) GI earth strip upto 7.5m is demed included in the unit rate.

Note: An amount of Rs.60,050.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S ASHOK ENTERPRISE

M/S MANODEEP CONSTRUCTION

M/S. VINITA CONSTRUCTION

CONSTRUCTION SHELTER