REPAIRS MAINT REPLACEMENT OF SCURITY STREET LIGHT, FLOOD LIGHT, HIGH MAST LIGHT, POST TOP LANTERN, GATE LIGHT, AUTOMATIC TIMER SWITCH, POLE PAINTING INTERNAL WIRING SUBMAIN WIRING CONTROL DBS MCBS, US FITTING FIXTURES AT KPG AND SHERWANI MIL STN

Amount

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DBs including sub main wiring etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC casing and capping not less than 20mm size, medium grade with all necessary fittings, surface wiring , for light /Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC rectangular block with 3 mm thick plastic laminated sheet cover of suitable size (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 3 here – in – before but for one light point controlled by Two Nos of 2 Way switches complete all as specified and directed by Engineer-in-Charge.

All as per item No 3 here – in – before but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables1.5 sq.mm size complete all as specified and directed by Engineer-in-Charge.

All as per item No3 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size complete all as specified and directed by Engineer-in-Charge.

All as per item No 3 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete all as specified and directed by Engineer-in-Charge..

All as per item No 3 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable.

All as per item No 3 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 4 Sqmm multi stranded and 4 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed by Engineer-in-Charge.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm dia, medium grade with all necessary fittings, concealed wiring , for light /Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated in 1.6 mm thick pressed steel terminal boxes/ on PVC Boxes (concealed type in permanent bldg and surface in temporary bldg or as directed ) for mounting fittings like switch, socket, fan regulator etc. with 3 mm thick laminated bakelite sheet cover ,for housing switches, socket outlet, regulator etc. complete all as specified or directed including testing on completion.

All as per item No 10 here – in – before but for one light point controlled by Two Nos of 2 Way switches complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here – in – before but One bell/ buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5 sq.mm size complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here-in-before but One 3 pin socket outlet 5/6 Amps on the same board with other switchs with cables 1.5 Sqmm size complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete all as specified and directed by Engineer-in-Charge.

All as per item No10 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed by Engineer-in-Charge.

All as per item No 10 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 4 Sqmm multi stranded and 4 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable complete all as specified and directed by Engineer-in-Charge.

Supply and fix switch piano flush button, single pole, 5/6amps, one way all as specified and as directed.

Supply and fix switch piano flush button, single pole, 15/16amps, one way all as specified and as directed.

Supply and fix switch piano flush button, single pole, 5/6amps, two way complete all as specified and as directed.

Supply & fixing Bell push flush type, 5 Amps button all as specified and as directed.

Supply & Fixing Bell, AC 230 Volts single pole including mounting block all as specified and as directed.

Supply & Fixing ceiling rose surface bakelite 65 X 50 mm three terminal all as specified and as directed.

Supply & Fixing Socket outlet 2 in 1, 3 pin, 5/6A all as specified and as directed.

Supply and fix Socket outlet 2 in 1, 3 pin, 15/16 Amp flush type all as specified and as directed.

Supply and fix switch socket combination 2 – in – one, 3 Pin / 5 Pin, 5/6 amps flush type compete all as specified and as directed.

Supply and fixing switch socket combination 2 – in – one 6 Pin , 6 / 16 amps flush type universal complete all as specified and as directed.

Material and labour for point wiring with 1.5 Sqmm (nominal area) PVC insulated un - sheathed single core multi stranded copper conductor FRLS cable 1100 volts grade (conforming to IS) drawn through and including rigid non metallic PVC conduit not less than 20mm size (concealed), medium grade with all necessary fittings, concealed wiring , for light / E/fan/Bell point controlled by one switch including 1.5 Sq mm PVC insulated copper stranded conductor for earth continuity conductor and connected to earth dolly and to be terminated including flush metal box 2/4/6/8/12 module with module inner and outer plates for mounting moduler switches,socket outlet,regulator etc. complete all as specified or directed including testing on completion. Note :- Proper colour coding of PVC insulated copper wire should be maintained as red/yellow/blue wires for phases,black wire for neutral and green wire for earth. Two run of 1.5 Sqmm for phase and neutral and one run of 1.5 Sqmm for earth wire.

All as per item No 27 here – in – before but for one 3 / 5 -pin switch socket outlet 5/6 amps on independent board complete all as specified and as directed.

All as per item No 27 here – in – before but for one switch socket outlet 15/16 Amps on independent board with 2.5 Sqmm multi stranded and 2.5 Sq mm stranded (for earth) PVC insulated un-sheathed copper cable all as specified and as directed.

Supply and fixing modular switch flush button ac 230 V single pole 6 Amp one way all as specified and as directed.

Supply and fixing modular switch flush button ac 230 V single pole 16 Amp one way all as specified and as directed.

Supply and fixing modular socket 6 Amp 5 pin combined all as specified and as directed.

Supply and fixing modular socket 6/16 Amp 3 pin combined all as specified and as directed.

Supply and fixing lamp/angle holder insulated body with back plate for batten fitting all as specified and as directed.

Supply and fixing LED retro fit lamp B-22, CCT- 3000 K/ 6500 K holder base with poly carbonate body and aluminium heat shrink of 9 W complete all as directed. Cat Part No LHLDDDECBD2R009 of Havells or equivalent in Crompton/Surya.

Supply and fixing in repairs compact batten of aluminium strong body (Single side connection) suitable for single T8 LED tube rod including mounting block complete all as specified and directed. Make:- Cat part No-REGALBATTENT8UPTO2X22WSSBSWHNW of Havells or equivalent Philips/crompton.

Supply and fixing in repairs LED polycarbonate T8 tube, 20 Watt, CCT - 3000/4500/6500K 6500K, 2150 lm, Polycarbonate housing in opal finish provides glare free uniform light, 1800lm, 30000 burning hours, Inbuilt aluminum heat sink, Surge Protection- 3KV, single sided connection complete all as specified and directed. Cat part No : PHOTONULTRAE2.01213T8SSTL20WLED865SPC of Havells or equivalent Philips/crompton.

Supply and fixing LED lights fitting 4 Feet 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size and mounting block complete all as specified and as directed.

S & F LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type CCT- 3000 K/ 6500 K with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed.

Supply and fixing Decorative, wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base. Cat part No LHFOAJE1TN1I060 of Havells or equivalent model of Philips/Bajaj / Crompton.

Supply and fixing round shape 6 watt 220 volts AC recessed type CCT- 3000 K/ 6500 K with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type CCT- 3000 K/ 6500 K with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type CCT- 3000 K/ 6500 K with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete including taking down old unserviceable fitting complete all as specified and as directed.

Supply and fixing LED bed side lamp 3W LED Black 3000K Cat Part No 48042 of Philips or equivalent in Havells/Crompton.

Supply and fixing LED Picture light, 6 Watt, Make: Philips, Cat Part No 30973 or equivalent in Havells/Crompton.

Supply and fxing LED flood light, 20 watt, die cast aluminium housing, high quality light diffuser, robust driver, wide operating voltage 100V-240V, Colour temp- 6500K, Input power - 20 Watt, protection to IP 66, LED Beam Angle: 120°, Cat Part No LHEECNP7PB6J020 of Havells or equivalent in Philips/Crompton.

Supply and fix in repairs indoor LED PL-L Base lamp 4 pin, 18 watt, 6500K, 240 Volts, including taking down existing light fittings complete all as specified and as directed by Engineer-in-charge. Cat Part No PHOTONULTRAPLL419TL18WLED865SPC of Havells or equivalent in Philips/Crompton.

Supply and fixing in repairs LED Panel Driver 9 W / 12 W round ceilinng light of various models, Input voltage - 220 to 240V, Frequency - 50 to 60 Hz, ta - -10 to +45 degree celcius, PF ≥ 0.50, input current - 0.090Amps, complete all as specified and as directed by Engineer-in-charge.Cat Part No LSSLNW0169 of Havells or equivalent in Philips/Crompton.

Supply and fixing in repairs LED Panel Driver 15 W / 18 W round ceilinng light of various models, Input voltage - 220 to 240V, Frequency - 50 to 60 Hz, ta - -10 to +45 degree celcius, PF ≥ 0.50, input current - 0.090Amps, complete all as specified and as directed by Engineer-in-charge.Cat Part No LSSLNW0170 of Havells or equivalent in Philips/Crompton.

S&F TPN DB with suitable for TPN MCB incomer, double door (IP-54), 4 Ways, built- in 200 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 4 way 240 Volts AC complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 8 way 240 Volts AC complete all as specified and as directed.

Supply and fixing Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 200 Amps rated Single pole and neutral linkof 12 way 240 Volts AC complete all as specified and as directed.

S&F metal plug socket single pole and neutral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series complete all as specified and as directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 To 100 AMP in the DB complete with connection testing and commissioning all as specified and directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and as directed.

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof complete all as specified and as directed. (Note Three run of 4 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length including taking down of old servicible sub main wiring).

M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC casing caping on surface of wall/roof complete all as specified and as directed. (Note Three run of 6 Sqmm including one run of 25 mm of size casing caping shall be measured as one unit length including taking down of old servicible sub main wiring).

M&L in repairs for sub main wiring along with earth wire of size two run of 4 sq mm + one run of 4 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof complete all as specified and as directed. (Note Three run of 4 Sqmm including one run of 25 mm rigid non-metalic PVC conduit shall be measured as one unit length including taking down of old servicible sub main wiring).

M&L in repairs for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLS including drawing into 25 mm rigid non-metalic PVC conduit concealed in wall/roof complete all as specified and as directed. (Note Three run of 6 Sqmm including one run of 25 mm rigid non-metalic PVC conduit shall be measured as one unit length including taking down of old servicible sub main wiring).

M&L in repairs PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and as directed.

All as per item No 65 here-in-before but of size 175 x 100 x 50 mm

All as per item No 65 here-in-before but of size 200 x 150 x 50 mm

All as per item No 65 here-in-before but of size 250 x 200 x 50 mm

Supply and fix in repairs unservicable broken/burnt ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.

Supplied & fixing in repairs on surface Rigid non-metallic PVC casing caping of size 25 mm including of all tees, bends, elbows and fixing accessories such as couplers, lock nuts, saddles, pipe hooks including taking down old broken PVC Casing caping and making good surface by plastering and 2 coat of paint complete all as specified and directed.

M&L in repairs Hylam Sheet including suitable size of 04 Nos brass screws and cutting of hylam sheet for mounting, switches, sockets, fan regulator etc. of size 100 mm x 100 mm and 3 mm thickness complete all as specified and as directed.

All as per item No 71 here-in-before but of size 175 x 100 x 3 mm

All as per item No 71 here-in-before but of size 200 x 150 x 3 mm

M&L junctions boxes, plastic, round, four terminals concealed in wall including taking down old unserviceable junction box all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC 1 : 3 : 6 type C-1 , 50 mm thick pre cast RCC 1 : 2 : 4 type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar ,GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50 m and necessary testing complete all as shown on electrical plate No. 5 of MES SSR Part-I and as directed.

Labour only for disconnection of off road existing security light fitting of any type by isolating jumper from OH line, terminal connection from junction box and removing carbonised/defective part of the cable including replacement of unserviceable cable connection and reconnecting the same after making security light in ON road position complete all as directed by Engr-in-Charge. Note : New cable connection will be measured and paid separately under respective item.

Supply and fix in replacement of Street light driver of 40 watts, 230 V, 50 HZ, suitable for operation over voltage range and by removing from existing position complete as per existing make and model complete all as specified and directed by EIC. Make-Crompton/Philips/Surya/Havells Note : i) T&P required for carry out the repair work on street lights at a height up to 15 meter will be arranged by contractor and rates for the same deemed to be included in quoted rates. ii) Contractor is bound to provide material to match the technical specification of LED fittings and material is also required to fix casing of LED fitting. iii) Before quoting the rate of driver contractor should check the technical specification of the driver.

All as per item No.77 above but cap. of 45 Watt LED fitting complete as per following make and model or as directed by EIC. Make-Crompton/Philips/Surya/Havells.

All as per item No.77 above but cap. of 50 Watt LED fitting complete as per following make and model or as directed by EIC. Make-Crompton/Philips/Surya/Havells.

All as per item No.77 above but cap. of 60/70 Watt LED fitting complete as per following make and model or as directed by EIC. Make-Crompton/Philips/Surya/Havells.

All as per item No.77 above but cap. of 90/120/110 Watt LED fitting complete as per following make and model or as directed by EIC. Make-Crompton/Philips/Surya/Havells.

All as per item No.77 above but cap. of 35 Watt Post top LED fitting complete as per following make and model or as directed by EIC. Make-Crompton/Philips/Surya/Havells.

All as per item No.77 above but cap. of 8 Watt BAMBOO bollard light LED fitting complete as per model or directed by EIC. Make-Crompton/Philips/Surya/Havells.

All as per item no.77 above but cap of 15 Watt post top , LED fitting complete all as specified Make-Crompton/Philips/Surya/Havells.

Supply and fix in replacement of surge protector of 5 KV suitable to accomadate in LED street/flood light fittings of 25 watts to200 Watts, 230 V, 50 HZ by removing from existing position complete all as specified and directed by EIC. Note : i) T&P required for carry out the repair work on street lights at a height up to 15 meter will be arranged by contractor and rates for the same deemed to be included in quoted rates. ii) Contractor is bound to provide material to match the technical specification of LED fittings and material is also required to fix inside casing of LED fitting. Make-Philips/Wipro/Crompton/Goldwyn/Decorex.

Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. MAKE :- Phillips/ wipro/ Crompton.

Supply and fixing in replacement LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. MAKE :- Phillips /wipro /Crompton.

Supply and fixing in replacement LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. MAKE :- Phillips /wipro /Crompton.

Supply and fixing in replacement LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. MAKE :- Phillips/wipro/Crompton.

Supply and fixing in replacement post-top-luminaire, 15 watt, IP-65 protoection, operating temp -10 degree celcius to +45 degree celcius, Operating voltage range - 140-270 V, Die-cast aluminium spigot housing for mouting of driver with spun aluminium canopy Mounting suitable for pole having 50 to 70 mm dia complete all as specified and directed by Engineer-in-charge. Make : Havells, cat part No RUBYMINIPT15WLED757PSYMTOPC, Model : RUBY (Clear) or equivalent.

S&F Crown shaped post top latern in soothing moon finish madeup of polycarbonate suitable for B22 Base lamp including one led Bulb 9 watt and all electric connection all as specified Make havells cat pt no LHDC11126099 ATHENA 3 ( Moon) or Equivalent from Crompton/ Bajaj

S&F in repalcement of Cone shaped LED Bollard light fittings, 8 watt, IP 65, diffuser at the upper portion, 0.5 mtr long including fixing arrangemets and eletric connection all as secified. Make- Havells Cat pt no- CONEBLS8WLED830PSYMTOPC (warm white)OR equivalant from CG/ Philips/ Bajaj

M & L for replacing power contactor Three pole with coil voltage 230 volt of capacity 40 Amps 50 cycles. Make Legrand / Standard / L&T MNX40

M&L for replacing Light sensor automatic nature switch (sensor) illuminance level for switching ON 60 Lux all as specified and directed make Healer Enterprises Or equivalent

S&F in replacement of TPN MCB 63 Amps rating, 'C' curve and having breaking capacity 10 KA including taking out of old u/s MCB Make Legrand / Standard / L&T

Supply and fixing in replacement of Thermal magnetic release MCCB 4 pole 415 volt rapturing capacity 16 KA 0f size 100 amp complete all as specified

Supply and fixing in replacement of Thermal magnetic release MCCB 4 pole 415 volt rapturing capacity 36 KA 0f size 160 amp complete all as specified

S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint complete including taking down u/s bracket any type all as specified and as directed.

Trimming of tree branches which touches the LT/HT OH lines and 2.5 Mtr away from centre line of LT/HT oh lines span not exceeding 60 Mtr distance between poles by using neccessory T&P items and depositing the tree branches/leaves at 30 Mtrs away from the site . Note -Any number of tree branches cut in one span will be measured as one lenght of payment ,

Excavation in trenches not exc. 1.5 m wide and not exceeding 1.5m depth for foundation of poles/laying of cables/stay/strut etc not exceeding 10 Sq m on plan and getting out in soft/loose soil.

All as per item No.100 above but exceeding 1.5 mtr and not exc.3.0 mtr

Returning, filling including spreading, leveling watering and well ramming in layers not exceeding 25 cm as directed.

Removing excavated material (soil) n.exc 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

M&L for providing dry river sand as in sand cushioning to under ground cable including punning down of sand in layers as specified and as directed.

Supplying and laying Bricks common burnt clay building bricks, sub-class ‘B’ for cable protection complete as specified and as directed by Engr -In-Charge

Supply & Laying in replacement of GI pipe light grade as protection for UG cable/for stand of post top lantern complete all as specified & directed of size of bore dia 40mm

Supply & Laying in replacement of GI pipe light grade as protection for UG cable/for stand of post top lantern complete all as specified & directed of size of bore dia 50mm

Supply, laying, testing & commissioning in repairs in trenches or passing through pipe, heavy duty under ground cable XLPE Insulated screened PVC bedded, armoured, over all PVC sheathed with stranded aluminum conductor 1100 volts grade of cross sectional area 10 sq mm 4core complete all as specified and directed.

All as per item No 108.00 above but size of cable 10 sq mm 2 core.

All as per item No 108.00 above but size of cable 16 sq mm 4 core.

All as per item No 108.00 above but size of cable 25 sq mm 4 core.

Dismantling / Taking out Unserviceable LT cables of size upto 35 sqmm any core from any position i.e ground / walls / poles / culverts etc complete with protection pipe all as specified and directed by Engineer-in-Charge.

S & F steel tubular swaged pole complete with cast iron base plate, finial taper plug, bots, nuts and screws, pole cap all as specified type 410 SP – 31 ( 9 mtr long ) as per IS 2713-1980 all as specified and as directed.

Dismantling / Taking up old unserviceable rusted steel tubular poles of any size and removing unserviceable pole from the site of work complete all as directed by the Engr-in-charge.

M & L for Plain Cement Concrete (1 : 4 : 8) type D-2 using 40 mm graded stone aggregate in foundation, filling and mass-concrete etc for pole, stay etc. all as specified and directed by Engr-in-charge

M & L for Plain Cement Concrete (1:3:6) type C-1 using 20 mm graded stone aggregae as in copping including necessary formwork, weathering, slightly rounded or chamfered angles, finishing of exposed surfaces of concrete to even and smooth without using extra cement all as specified and directed by Engr-in-charge

M&L for painting of 9 Mtr Long steel tubular LT pole , vertical complete with cross arms with one coat of aluminium paint after cleaning and preparation of surfaces of poles, cross arms, painting 30 cm wide Yellow and black strip on poles up to 1.5 mtr high above coping level and numbering of size 70mmx40mm by using stencil to the pole with black synthetic enemal paint (1st grade ) complete all as directed.

Supply & fixing in replacement automatic street light switch of rating 8 KW in single phase using nature sensor for automatic swithing "ON/OFF" of street lighting based on lux level of natural light along with 63 Amps contactor, MCB 63 Amps with support terminals prewired with PVC insulated 16 Sqmm multi strand copper wire enlosed/housed in pole wall mounted enclosure made of rust proof , shock proof , termite proof & dust proof FR grade moulded compound Junction Box complete all as specified. Model - SWADEEP - 02EC 8 KW 1 P complete all as speciifed. MAKE- 1.Nature-Nature Switch : Kakatiya Energy systems Pvt. Ltd / HEALER / BAJAJ

Supply & fixing in replacement automatic street light switch of rating 8 KW in Three phase using nature sensor for automatic swithing "ON/OFF" of street lighting based on lux level of natural light along with 63 Amps contactor, MCB 63 Amps with support terminals prewired with PVC insulated 16 Sqmm multi strand copper wire enlosed/housed in pole wall mounted enclosure made of rust proof , shock proof , termite proof & dust proof FR grade moulded compound Junction Box complete all as specified. Model - SWADEEP - 02EC 8 KW 3 P MAKE- 1.Nature-Nature Switch : Kakatiya Energy systems Pvt. Ltd / HEALER / BAJAJ

M & L for junction box hot press moulded SMC of size 295 x 195 x 100mm with locking arrangements consisting of necessary suitable arrangements for incoming & out going cables with cable glands & having TPN Bus bar 100A amps capacity with necessary base insulator and including necessary flat iron clamps with nuts, bolts & washers all as specified and directed. Make- Sintex Industries Ltd or equivelent make.

All as per Item no.120 But the size of 155 x 155 x 100

M&L in replacement of Earthing complete with galvanized steel earth plate electrodes 600x600x6 mm thick buried directly in ground earth (earth pit not less 2.25 m deep below ground level) with top edge of the plate not less then 1.5 mtr below normal ground level connected to galvanised iron wire 4mm dia by means of bolt nuts check nuts and washers of galvanized iron or steel all as specified & shown in electrical plate No.3 of MES SSR part-I 2009 connected to earth test point as specified and testing on completion including provision of 40 mm dia light grade pipe up to 7.5 mtr length as protection & watering pipe shall be 20 mm bore medium grade including all excavation & earth work in any type of soil incl PCC pit (1:3:6) type C-1 with RCC cover including charcoal , salt, funnel, all as directed at site.

Supply & Fix in replacement 3 Core copper cable 1100 volts grade PVC insulated and PVC sheathed of size 1.5 sqmm.

PVC flat twin core unarmoured Aluminium cable of size 4.0 Sqmm all as specified.

PVC flat twin core unarmoured Aluminium cable of size 6.0 Sqmm all as specified.

PVC flat twin core unarmoured Aluminium cable of size 10 Sqmm all as specified.

M&L for Painting of complete GI post top light fitting pipe hight upto 1 mtr with PCC protection of pipe by applying single coat of synthetic enamel paint after preparation of existing surface of GI post , colour as existing or directed by Engineer in charge.

Note: In case doubling/duplicancy of BOQ items , the lowest quoted rate shall be applicable for payment.

MS BRAHMA CONSTRUCTION (BID ID -3194776)

KAMLESH ENTERPRISE (BID ID -3194799)

DEEP CHANDRA JOSHI (BID ID -3194779)

HEM RAJ GURUNG (BID ID -3194857)

GYANENDRA THAPA (BID ID -3194865)

Janata Enterprises (BID ID -3193966)

M/S JAYSHREE CONCERN (BID ID -3194846)