82533 PROVN OF DEFICIENT SINGLE SAILORS INLIVING ACCN AND MESS FOR DORNIER SQUADRON AT MEENAMBAKKAM UNDER AGE I CHENNAI

Amount

GENERAL SUMMARY NOTE: Schedule ‘A’ Part - I to VIII are prepriced by MES under Ser No. 2.00 to 9.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “BUILDINGS / STRUCTURES ” as listed in Schedule ‘A’ Part - I , on Serial Page No.24(R)

Lumpsum price worked out by the tenderer for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-II on Serial Page No.26(R)

Lumpsum price worked out by the tenderer for "INTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-III on Serial Page No.28(R)

Lumpsum price worked out by the tenderer for "APPROACH PATH" as listed in Schedule ‘A’ Part-IV on Serial Page No.29(R)

Lumpsum price worked out by the tenderer for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-V on Serial Page No.30(R)

Lumpsum price worked out by the tenderer for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-VI on Serial Page No.32(R)

Lumpsum price worked out by the tenderer for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VII on Serial Page No.33(R)

Lumpsum price worked out by the tenderer for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VIII on Serial Page No.35(R)

Subtotal

NOTE: Schedule ‘A’ Part - IX is not prepriced by MES and prepriced rate indicated as 0.00 under Col.5 signifies this fact only. Bidder shall insert their rates in Green colour filled under Col-6.

SCHEDULE "A" PART - IX MISCELLANEOUS ITEMS Supply and fix Angular stop cock 15 mm dia, quarter turn complete all as specified and as directed. Make - Jaquar Model No CQT-23059 or equivalent model as specified in PS as approved.

S&F Sink cock with swinging casted round shape spout (Wall mounted model) 15 mm dia, quarter turn complete all as specified and as directed. Make - Jaquar Model No CQT-23347 or equivalent model as specified in PS as approved.

S & F Two way bib tap / angle cock 15 mm complete all as specified and as directed. Make – Jaquar Model No CQT-23041 or equivalent model as specified in PS as approved.

S&F Health faucet (ABS body) with 01 meter long PVC tube & wall hook complete all as specified and as directed. Make - Jaquar Model No ALD-573 or equivalent in model as specified in PS as approved.

M & L for concealed point wiring using 1.1 kV grade single core FR-LSH flexible cable, conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral, and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade UPVC surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 20 mm NB, including cutting chases, factory made not less than 1.2 mm thick sunken, modular flush sheet galvanized metal enclosure having zinc coating not less than 120 GSM, , conforming to IS 14772: 2000, having top, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover-plates and making good of disturbed surfaces of wall / ceiling / floor, etc. complete all as specified in IS 732: 2019 and directed by the engineer-in-charge for the following items:-

(a) One light point controlled by one switch, with cables 1.5 sqmm size

(b) One light point controlled by two 2-way switches, with cables 1.5 sqmm size

(C) One fan point controlled by one switch, with cables 1.5 sqmm size

(d) One exhaust fan point controlled by one switch, with cables 1.5 sqmm size

(e) One 6 A socket outlet, on the same board with other switches, with cables 1.5 sqmm size

(f) One 6 A socket outlet, independent, with cables 1.5 sqmm size

All as per Item No. 16, but 4 Sqmm size copper conductor cable FRLSH and 4 Sqmm copper earth wire cable FRLSH drawn through not less than 20 mm dia UPVC conduit including provision of conduit and conduit accessories for 5/16 Amps Multi purpose switch socket combination on independent board complete all specified and as directed.

M & L for submain wiring using 1.1 kV grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of 4.0 mm² electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade UPVC surface / recessed conduits, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified in IS 732: 2019 and directed by engineer-in-charge. Note:- [i] Phase & neutral conductors (02 runs), earth continuity conductor (01 run) and surface / recessed conduit (01 run) shall be measured combined as one length.

M & L for submain wiring using 1.1 kV grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of 4.0 mm² electrolytic copper conductors for phase, neutral and earth continuity conductor connecting to earth dolly, drawn in medium grade UPVC surface/recessed conduit conforming to IS 9537 (Part 3): 1983, colour coded as per IS 11353: 1983, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified in IS 732: 2019 and directed by engineer-in-charge. Note:- [i] Phase & neutral conductors (04 runs), earth continuity conductor (01 run) and surface / recessed conduit (01 run) shall be measured combined as one length.

M & L for earthing complete with GI earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. complete all as specified and directed by the engineer-in-charge.

S & F 20 W surface / wall mounted LED batten capable of delivering minimum 2000 lumen, having PC diffuser, luminous efficacy of > 90 lumen/W, CRI > 80, PF > 0.9, CCT 6500K, independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. BN 021C LED20S PSU CDL/NW GR or equivalent model of Havells/Crompton/Wipro/Bajaj

S & F 3-star (EEL) T-shape lamp capable delivering 1000 lumen having luminous efficacy of > 100 lm/W, starting time < 0.5 s, CRI > 80, CCT 6500K, PF >0.9, input voltage range 140- 270 V, input frequency 50- 60 Hz and B22 socket complete all as specified and directed by the engineer-in-charge. Make: Philips Cat-Part No. T- Bulb CW 10W B22 or equivalent model of Havells Cat-Part No. LHEXACP7FN1W010 or Wipro Cat-Part No. LL20-111-XXX-65-NE

S & F 5 W LED study lamp having with touch based on/off switch, adjustable lamp shade with 3 step dimming along with LED lamp of 5 W, 3 star rated, luminous efficacy of > 105 lumen/W with holder base B22 all as specified and directed by engineer-in-charge. Make: Philips Cat-Part No. LedVantez or equivalent model of Havells/Crompton/Wipro/ Bajaj

S & F surface mounted round shape LED downlight capable of delivering 1200 lumen. having minimum luminous efficiency > 100 lumen/W, CCT 6500K, CRI > 80, high quality polycarbonate diffuser, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection complete all as specified and directed by the engineer-in-charge. ake: Philips Cat-Part No. SM250C LED12S- 6500 PSU WH or equivalent model of Havells Cat-Part No. LHEAABP7IL1W012 or Wipro Cat-Part No. LD80-101-XXX-60-SM

S & F 25 W security light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 2600 lumen/W, integral SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, wall mounting with bracket arm OD 35 mm to 42 mm including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and 1.5 m long bracket, having 40 mm diameter light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete in all respect as specified and directed by engineer-in-charge. Note:-The above rate including security light fittings and GI pipe bracket with all fixing accssories. Make: Philips BRP052 LED 036 CW HP SLA FG S1 PSU GR or equivalent model of Havells or Wipro

Supply,Install,Testing and commissioning of 1HP open well Submersible pump having head not less than 20 mtr, electric driven 230 V, DP supply and Install complete all as specified and as directed.

Material and labour for laying 1.5sqmm copper 3core flat submersible cable suitable for 1 hp submersible pump complete all as specified and as directed.

Material and labour for fixing dol starter suitable for 1 HP pump set in sheet metal enclosure, with in built single phase and phase reversal protection complete all specified and as directed.

Supply and fix energy saving ,street light fittings LED 60 watts luminaire with high power LEDs and unique flood optics to ensure uuniform distribution and saving upto 50% w.r.t conventional system and maintenance free system ,ideal for area lighting , high mast and bill board including fixing arrangement on pole by providing GI pipe medium grade 25 mm dia 1.5 Mtr in length bent to an angle 135 degree including two coats of aluminium paint over a coat of zinc chromate primer along with bolts, nuts etc with suitable size MS Clamp two Nos made out of 25x3 mm FI, prewired and including connecting up with 3 core flexible copper conductor cable of suitable size from conne

Supply,Install,Testing and commissioning of self supporting totally enclosed mounted on Base channel of size 75 mm x 75 mm x6mm outdoor type LT Panel from CPRI certified Panel builder factory fabricated made out of not less than 3 mm thick CRCA sheet ,dust and vermin proof, hinged smoothly openable front and rear, with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip (32 x 6 mm) connecting provosion - 02 Nos, ventilation louvers, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc panel board suitable for 3 phase 4 wire ,415 volts 50 hz, panel size shall be suitable for mounting and including the following items and connecting all outgoing feeder cables using suitable size lugs of any type complete all as specified and directed.

Item No 30 Cont…… (i) MCCB wiith adjustable type 100 Amps 4P, 50 Hz, 415 Volts with rupturing capacity 16 KA -01 No (as incomer). (ii) MCCB wiith adjustable type 16-63 Amps 4P, 50 Hz, 415 Volts with rupturing capacity 16 KA -03 Nos (as out goings) . (iii) Electrolytic copper Bus Bar of 200 Amp rating main bus @ 50 KA supported in suitable size porcelain strand lock with suitable size brass nut, bolt and washers with colour coded PVC sleaving for three phase and neutral -01 Set. (iv) Resin cast current Transformer - 3Nos with CT ratio 100/5 Amps (v) Digital voltmeter - 1 No (vi) Digital Ammeter - 1 No (vii) LED Phase Indication Lamps for R,Y,B -1 Nos each respectively. (viii) Earth bus of size 32 x 6 mm in the panel - 2 Nos

Material and labour for Earthing complete with using galvanised steel earth plate electrode of size 600mm x 600mm x 6 mm thick buried directly underground vertically (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate at a depth not less than 1.5m below ground level connected with and incl galvanised iron strip 32 x 6 mm by means of GI bolts and nuts,check nuts,washers and GI earth strip protected by GI pipe light grade 40 mm bore upto 7.5 mtr and connecting to earth terminal/ test point etc as per site requirement including necessary excavation, earth work in any type of soil PCC (1:3:6) type C1 chamber and 40 mm thick RCC Cover with 6 mm dia MS bars 10 cm C/C on both ways as reinforcement complete all as shown in electrical plate No. 3 of MES Schedule Part 1 including watering pipe 20 mm dia medium grade with funnel and with mesh , refiling soil all as specified. Note:(i) Quoted rate deemend to include necessary earth work PCC chamber, RCC cover, reinforcement removal of surplus soil , site clearance etc. (ii) GI earth strip , GI tubing light grade upto 7.5m deemed to be included in the rate quoted by the contractor. (iii) Beyond 7.5 mtr the GI earth strip 32X6 mm & GI pipe light grade 40 mm dia shall be measured under relevant item of the schedule. (iv) Quotated rate include testing after completion from test point and the desired earth resistance shall be not more than 2 ohm .If the desired result is not obtained the earthing will be re done by the contractor at no extra cost.

supply and erect cable tray size 300 mm (W) X 80 mm (H) X 3 mm (T) made up of perforated hot dip galavanized iron sheet of guage 14 SWG duly powder coated with coupler plates tee horizontal bend etc with coupler plates,tee,horizontal bend,vertical,etc with neccessery arrangements to fix on wall complete all as specified and as directed.

Supply and fix weather proof cable junction boxes suitable for outdoor installaions with knockout for cable entry looping in box PVC with side dimension155mmx210mmx92 mm comprising of connector -01nos including mounting arrangements and lugs etc. complete all as specified and as directed.

Cutting the road / hard standing for laying of pipes / cable in trenches and making good with PCC 1 :2 :4 Type B1 complete all as specified and as directed .

Material and labour for DWCRE (SN8) of 150mm Inner dia , with collar ,laid and jointed with solvent as manufacturer instructions laid in trenches etc etc complete all as specified and as directed.

Supply and fix fully SS body water cooler electric driven (single phase), having approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour complete all as specified and as directed.

Supply and fix refrigerator,electric driven double door single phase capacity more than 360litres upto 460 litres BEE 5star rated complete all as specified and as directed.

Supply, installation,commissioning of Glass Top Deep Freezer not less than 400 litre capacity double door single phase 240 volt, 50 Hz complete all as specified and as directed.

Supply, and fix electric water heater storage type steel body with copper inner tank and heating element upto 2kw capacity 25 litres BEE 5 star rated complete with all accessories suh as safety valve thermostat NRV connection piece etc complete all as specified and as directed.

M&L for Grubbing up tree trunk grith of tree exe 30cm and not exe 100cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and as directed.

power links

ASHWIN ASSOCIATES