Construction of New Hostel Building (50 seated) at Khadipahadi PSH under Bangriposi Block

Earth work excavation of foundation in all kind of soil within initial lead of 50m and initial lift of 1.5mm including dressing the sides leveling the bed and depositing the excavated materials away from the work site, shoring etc if required, complete the item of work in all respect as per direction of the Engineer-in-charge.

Filling foundation and plinth with excabated materials etc. complete.

Filling foundation and plinth with filling sand laying in layers including ramming, watering, compacting including cost, conveyance and royalty of sand from approved quarry and other taxes if any with all leads, lifts, T&P etc complete the items of work in all respect as per specification and direction of Engineer in charge.

CC (1:3:6) using 40 mm size and down graded crusher broken HG stone metal free from weathered surface of approved quality from approved quarry in foundation and plinth including laying concrete in layers with due compaction, watering and curing including cost, conveyance, royalty and taxes of all materials with all lead, lifts and delifts, T&P etc required for completion of the work in all respect as per direction of the Engineer-in-charge.

RCC work of M-20 grade with 20 mm and down grade black hard granite chips including cost, conveyance, royalty and all taxes of all materials with all leads, lifts, T&P etc. after the curing of RCC work for 28 days complete the item of work in all respect as per specification and direction of Engineer-in-charge.

Column base & Footing

PLINTH BEAM

LINTEL GROUND FLOOR

LINTEL FIRST FLOOR

LINTEL SECOND FLOOR

BEAMS & COLUMN GROUND FLOOR

BEAMS & COLUMN FIRST FLOOR

BEAMS & COLUMN SECOND FLOOR

ROOF SLAB GROUND FLOOR

ROOF SLAB FIRST FLOOR

ROOF SLAB SECOND FLOOR

CHAJJA GROUND FLOOR

CHAJJA FIRST FLOOR

CHAJJA SECOND FLOOR

STAIR CASE GROUND FLOOR

STAIR CASE FIRST FLOOR

20mm thick grading plaster (1:4) on roof slab using including cost, carriage, and royalty of materilas complete as per specification and direction of Engieer in charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Cement Concrete (1:2:4) using 12mm hard granite chips including cost, carriage and royalty of materials complete as per specification and direction of Engineer in charge.

GROUND FLOOR

Brick work with Flyash bricks of size 25 cm X 12 cm X 8 cm having crushing strength between 100 kg/cm2 to 149 kg/cm2 in cement mortar (1:6) in foundation & plinth including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

SUB-STRUCTURE

Brick work with Flyash bricks of size 25 cm X 12 cm X 8 cm having crushing strength between 100 kg/cm2 to 149 kg/cm2 in cement mortar (1:6) in superstructure including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

SUPER-STRUCTURE GROUND FLOOR

SUPER-STRUCTURE FIRST FLOOR

SUPER-STRUCTURE SECOND FLOOR

Brick work with Flyash bricks of size 25 cm X 12 cm X 8 cm having crushing strengthe between 100 Kg/cm2 to 149 kg/cm2 in cement mortar (1:4) in superstructure including cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

SUPER-STRUCTURE GROUND FLOOR

SUPER-STRUCTURE FIRST FLOOR

Providing & fixing TOR Reinforcement bars of approved makes for RCC work of required diameter & of approved quality including straightening, cutting, bending, binding, joining, tying the grills hoisting, lowering and placing in position as per the approved design and drawings with provision for fan hooks where required including the cost, conveyance of reinforcement bars of tor steel and binding wires of 18 to 20 gause, cost of all labour, loading, unloading, labour cess T&P, etc required for the work complete for the work in all heights as per specification & excluding GST as direction of Engineer-in-charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

16mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and directiong of Engineer in charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

12mm thick cement plaster (1:6) in cement mortar finished smooth surface on brick wall after racking out joints including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc, as per specification and direction of Engineer in charge

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

6mm thick cement plaster in cement mortar(1:4) to RCC curface finished including watering curing to required period including cost conveyance, royalty of all materials, T&P complete etc. as per specification and direction of Engineer in charge

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Supplying of M.S. Grills, Collapsible gates made out of M.S. Angle frame, M.S. Flat Sheet etc. of approved section and design, electrically welded properly with all necessary locking arragement and one coat redoxide primer including cost of all materilas, labour, T&P, carriage of materials to site etc. complete as per the direction of the Engineer-in-charge.

Fixing Vetrified floor tiles in floors, treads on steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement: 1 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing, cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

GROUND FLOOR

FIRST FLOOR

Verified tiles on dado, skirting and risers of steps on 12mm thick cement plaster (1:3) joint with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and plishing, cost, conveyance, royalty, taxes of all materials, labout, T&P required for the work complete and as per the direction of the Engineer-in-charge.

GROUND FLOOR

FIRST FLOOR

Fixing ceramic floor tiles in floors, treads on steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement: 1 sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing, cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

GROUND FLOOR

FIRST FLOOR

Fixing ceramic wall tile in dado, skirting and risers of steps on 12mm thick cement plaster (1:3) joint with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing, cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

GROUND FLOOR

FIRST FLOOR

Fixing Industrial Vitrified 300mmx300mm tiles in floors, treads on steps and landing.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Fixing Industrial Vitrified tiles in dado, skirting & riser of steps.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Fixing Granite floor tiles in floors, treads on steps and landing on 25mm thick bed of cement mortar 1:1 (1 cement: 1 sand) joined with neat cement slury mexed with pigment to match the shade of the tiles including rubbing and polishing, cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

GROUND FLOOR

Fixing Granite tile in dado, skirting and risers of steps on 12mm thick cement plaster (1:3) joint with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing, cost, conveyance, royalty, taxes of all materials, labour, T&P required for the work complete and as per the direction of the Engineer-in-charge.

GROUND FLOOR

Supplying, fitting of 60mm thick cement concrete interlocking paver block of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRC SP 63:2018 as per the direction of the Engineer-in-charge.

Supplying, fitting of ISI marked 32mm thick flush door shitters confirming to IS: 2202 (part-1) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak three ply veneering with vertical grains or cross bands and face veneers on both faces of shutters of pproved design including cost of all door fittings and fixture etc. as per specification and direction of the Engineer-in-charge.

Supplying, fitting and fixing of window (sliding type) made up Aluminium section 9778 as window frame, section no. 4095,4096 and 9777,3994 as shutter frame with 6mm thick thoughened glasses as panel fitted with rubber beading including locking arrangement including all fitting including cost of all materials, taxes labout T&P

Providing, fitting and fixing of AI. Door with anodized AI. Door section 9202 as vertical member, 9201 as top, 9200 as bottom and middle member with frame section as 9221 with tapered clip no. 4660 and the frame to be completed by means of jointing angle No. 1885 with 6mm thick toughened glasss as panel fitted with rubber beading including locking arrangement, all coast of materials, labour T&P, all taxes, hire charges of drilling machine etc. complete as per direction of Engineer-in-charge.

ACP Sheet

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mmx2mm @ 0.90m C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in staircase as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for completion of work in all respect as per direction of Engineer-in-charge.

Finishing surface of walls with cement based wall putty (water Based) of approved make & finished smooth & even surface to receive painting including cost of scaffolding, staging charges with cost of all materials and labour etc complete in all respect as per direction of Engineer in charge.

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Wall painting two coats with plastic emulsion paint paint with one coat of primer of approved make & finished smooth & even surface to receive painting including cost of scaffolding, staging charges with cost of all materials and labour etc complete in all respect as per direction of Engineer in charge

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Painting exterior walls with weather coat paint of approved make over one coat of priming of approved exterior primer including cost of scaffolding, staging charges with cost of all materials and labour etc complete in all respect as per direction of Engineer in charge

GROUND FLOOR

FIRST FLOOR

SECOND FLOOR

Painting two coats of synthetic enamel paint over a coat of primer of approved quality, brand and shade incliding smoothening the surface by sand paper and filler etc eomplete with cost, conveyance, royalty, taxes of all materials, labours T&P required as per specification and direction of Engineer-in-charge.

Providing and injecting chemical emulsion for pre-construction antitermite treatment and crating a chemical barrier (through agency approved by Owner). Using Choropyriphos Emulsifiable 1.0% concentration by weight under and all- around foundation pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor, along the external perimeter of building atleast 2meter all around the outer face of plinth area, expansion joints, surrounding of pipes, water conduits or at places as per direction Engineer-in-charge.

GROUND FLOOR 25mm dia UPVC ASTM-D Pipes

GROUND FLOOR 32mm dia UPVC ASTM-D Pipes

FIRST FLOOR 25mm dia UPVC ASTM-D Pipes

FIRST FLOOR 32mm dia UPVC ASTM-D Pipes

SECOND FLOOR 25mm dia UPVC ASTM-D Pipes

SECOND FLOOR 32mm dia UPVC ASTM-D Pipes

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC pipes conforming to C. PVC178/89 (Sch-80) and G.I pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor, testing all complete as per P.H. specification and direction of Engineer-in-charge.

GROUND FLOOR 25mm dia C-PVC Pipe

GROUND FLOOR 20mm dia C-PVC Pipe

1st FLOOR 25mm dia C-PVC Pipe

1st FLOOR 20mm dia C-PVC Pipe

2nd FLOOR 25mm dia C-PVC Pipe

2nd FLOOR 20mm dia C-PVC Pipe

Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar(1:4) for taking GI pipes and fittings/PVC pipes and fittings etc. all complete as per PH specification and direction of the Engineer-in-charge.

GF. 250mm thick wall

1st. 250mm thick wall

2nd. 250mm thick wall

Supplying all materials, labour, T&P and cutting holes RCC floors and roofs upto 19cm thick for passing PVC pipes and G.I fittings including making good the damages in cement conrete (1:2:4) for taking GI pipes and fittings/PVC pipes and fittings etc. all complete as per PH specification and direction of the Engineer-in-charge.

1st. FLOOR

2nd. FLOOR

Supplying all materials, labour, T&P and cutting groovs in pucca floors and walls for taking PVC pipes and G.I fitting. all complete as per PH specification and direction of the Engineer-in-charge.

1st. FLOOR

2nd. FLOOR

Supplying all materials, labour, T&P and fixing rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixinf mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required postion and providing 5.40 mtr. lengthx0.25 mtr width KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr heifht to support the thank, 12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick, RCC beam of 0.25mx0.30m and 2.60m average lenghth in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips including centering and shuttering, watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc. all complete as per approved drawing, PH specification and direction of the Engineer-in-charge.

2nd FLOOR 2000 ltrs capacity rotational moulded polythylene cylindrical vertical water storage tank (Without stagging)

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of following nominal bore with supply of all jointing materials complete as per PH specification and direction of the Engineer-in-charge.

15mm C.P.Bib cock (Plaza make)

15mm C.P.Long Body Bib cock (Jaquar make)

20mm dia CP Concealed Stop cock (Plaza make)

15mm CP Pillar cock (Plaza make)

15mm dia CP Angle Stop cock (Plaza make)

25mm dia brass fullwa

y valve(Shakti make)

32mm dia brass fullway valve(Shakti make)

15mm dia CP two way Bib Cock (Cat-no-.041KN)

15mm dia CP extension piece

15mm dia CP flange

125mm dia CP gratting

health faucet W/S D Spray, metal hose. (PVC)

Supplying all materials, labour, T&P and fitting and fixing 10n litres capacity PVC low level flushing cistern with a pair of PVC brackets complete with fittings such as PVC siphonic arrangemenrs, 15mm dia nominal size PVC ball valve iwth polythene float, PVC handles, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia PVC inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet, and connecting the inlet pipe withoutlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet, and connecting the inlet pipe with supply main etc. all complete as per PH specification and direction of the Engineer-in-charge.

10 ltrs. Capacity PVC L.L cistern (Slimline-Deluxe-white-Parryware)

32mm dia flush bend for L/L cistern

Supplying all materials, labour, T&P and fitting and fixing CP shower with 15mm or 20mm inlet including polishing etc. all complete as per specification and direction of the Engineer-in-charge.

15mm CP Revolving shower with shower Arm. (Plaza make)

110mm dia U-PVC SWR-Pipe (suprem/Ashirvad)

110mm dia U-PVC Door tee

110mm dia U-PVC Plain bend

110mm dia U-PVC plain Tee

110mm dia U-PVC offest without ear

250mm to 375mm thick wall

110mm dia U-PVC Door cross Tee

110mm dia U-PVC Door Bend

110mm dia U-PVC 'P'Trap

110mm dia U-PVC Cowl

110mm dia U-PVC Plin Shoe Bend

Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for takind U-PVC / HCI pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of the Engineer-in-charge.

110mm dia U-PVC Cocket plain

Supplying all materials, labour, T&P and cutting of RCC roof or cornice for taking HCI pipes and making good the damages etc. all complete as per P.H. specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and fixing Vitreous china water clost, squatting pan (Indian type WC pan / Orissa pattern squatting pan) duly embedded in cement concrete 1:5:10 using hard granite metal 4cm nominal size including fixing a pair of vitreous china 250mmx130mmx30mm foot rest, fixing 100mm dia hci 'p' or 's' trap for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and making good the damages etc. all complete as per P.H. specification and direction of the Engineer-in-charge.

580mmx440mm size Orissa Pan (White)

Supplying all materials, labour, T&P and fitting and fixing Vitreous Chaina washed down water Closet (European type water closet - EWC) with intergral "P" or "S" type trap to the floor including wodden plug and chromoum plated screw including jointing the trap with soil pipe in CM(1:1) fixing plastic seat cover for washed down water closet with crmium plated brass hinges and rubber burrers including polishing etc all complete as per specification and direction of the Engineer-in-charge.

One Piece Closet "Alpine". Cat.No-92504(Hindware)

Supplying all materials, labour, T&P and fixing Wash basin with hole for pillar taps with cast iron or MS brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. fixing pedestral for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, chanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 12mm dia CP brass waste etc. all complete as per specification and direction of the Engineer-in-charge.

550mmx400mm size wash hand basin with Porcelain pedestal

Supplying all materials, labour, T&P and fixing Mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc. all complete as per specification and direction of the Engineer-in-charge.

Mirror(Bevellededge) 600mmx450mm

Supplying all materials, labour, T&P and fixing standard sized Glass-sheif with CP brass bracket and guard rail complete fixed to wooden plugs with screw etc. all complete as per specification and direction of the Engineer-in-charge.

600mmx125mm size glass shelf with CP ruard rail

Supplying all materials, labour, T&P and fixing standard sized CP brass brackets fixed to wooden plugs with chromium plated brass screw etc. all complete as per specification and direction of the Engineer-in-charge.

25mmx600mm long CP Towel rail

CP Towel Ring

Supplying all materials, labour, T&P and fixing CP Soap Holder complete with CP brass brackets fixed to wooden plugs with chromium plated brass screw etc. all complete as per specification and direction of the Engineer-in-charge.

CP soap holder

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and fixing in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12cm size crusher broken hard black granite chips including watering, curing, cost of all materials, conveyance of materials to work site with pyament of royalty, all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.

1st FLOOR

1st FLOOR

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge.

2nd FLOOR

1st FLOOR

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brick work including watering, curing, cost of all materials, conveyance of materials to work site with pyament of royalty, all taxes etc all complete as per PWD specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and construction gully trap chamber of inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmx150mm size CI grating etc. all complete as per drawing, specification and direction of the Engineer-in-charge.

In side size 250mmx250mm

Supplying all materials, labour, T&P and constructing Inspection Chamber of inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed, KB brick work in cement mortar (1:6) in foundation and pli

nth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, RCC cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with RCC man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of toyalty, all taxes etc. all materials to worksite, payment of roylaty, all taxes etc. all complete as per approved drawing, PH specification and direction of the Engineer-in-charge.

Inside size 760mmx760mmx460mm

Supplying all materials, labour, T&P and constructing Man Hole Chamber of inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed, KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside, RCC cover slab (1:2:4) using 12mm size crusher broken black hard granite chips with RCC man hole cover, earth work in excavation in all kiknds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all materials to worksite, payment of roylaty, all taxes etc. all complete as per approved drawing, PH specification and direction of the Engineer-in-charge.

Inside size : 910mmx910mmx910mm

Supplying all materials, labour, T&P and constructing Soak Way Pit of the following size with dry brick walling from bottom upto invert of inlet pipe and KB brick work in cement mortar (1:6) for the remaining height at top, cement concrete (1:4:8) using 40mm size crusher broken hard black granite metal on bed, 12mm thick cement plaster in cement mortar (1:4) inside and outside over masonry brick work, gravel backing in the rear of well steining, RCC cover slab in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips fitted with iron lifting handles including earth work in open well excavation in all kinds of soil and refilling of cavity around the pit and painting the iron works, watering, curing, cost of all materials conveyance of all materials to worksite, payment of royalty, taxes etc. all materials to worksite, payment of roylaty, all taxes etc. all complete as per approved drawing, PH specification and direction of the Engineer-in-charge.

1.20m dia x 2.00m deeop inside size Soakway Pit

Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipe conforming to IS:4985/2000 of the following outside dia for class-3 (0.60mpa) including jointing with supply of approved slovent cement by non-heat application method/ as per manufatutes's providng and laying in trench cement concrete (1:4:8) with 40 mm size hard granite metal in the Type-C-1 standard bedding surrounding or encasing indluding concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer-in-charge.

110mm dia U-PVC pipe (Allround concrete)

Construction of 50users RCC septic tank-2Nos Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as per direction of the Engineer-in-Charge

Exra lifts of 1.50 mtr or part there of over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general

Supplying all materials, labour, T&P and providing shoring and shuttering foundation trenches, pits etc with close wooden planks or sheets shuttering etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

In GF (inside/outside)

Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

RCC floor and roof slabs up to 4.30m height (Buffle wall)

Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge.

RCC beams, columns, girder and bressmer etc

Supply and fixing of 9watt LED bulb, holder base type: B22, Colour Temperature 6500 Kelvin Average Life 10000 Hours (Make- Havells/ Philips/ Crompton or any other approved make)

Supplying all materials, labour, T&P and providing MS reinforcement for RCC work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

Supply and fixing of 300mm Exhaust Fan, Motor Speed: 1400 RPM Metal Blade, Double ball bearings heavy duty motor, metal bird guard, Air delivery (minimum): 1850 m3/h, Noise level : 40- 45 dB

Supply and fixing of 45 watt led streetlight Endura citylite platinum energy saving and environmental friendly long lige LED street light made up of pressure die cast alluminium housing with acrylic cover as diffuser with IP66 pretection and impact resistance of IK07

Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for RCC works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and providing brick work witj K.B bricks having crushing strngth not less than 75kg/cm2 with dimensional tolerance 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer-in-charge.

Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer-in-charge.

In GF 1x1.60x0.25x1.50

Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge

Group-A L.P- F.P- C.B.P-

Point

Group-B L.P- F.P- C.B.P-

Group-C L.P- F.P- C.B.P-

Supply and fixing of 6Amp plug with 6Amp switch on existing board (Modular type)

Point wiring for 5 / 6 amp modular socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with modular switch, modular cover plate suitable size ISI marked earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. (Make of wire Finolex / L&T / Anchor / Havels / V Guard or any other approved make)

S/F of modular 6-16amp 3 pin modular shuttered socket with 16 Amp modular DP switch with indicator on 4 module GI box, wiring of plug with 4 sqmm wire, running earth with 1.5 sqmm PVC insulated copper conductor, 4 module cover plate in front complete in all respect suitabl

e for friedge/ washing machine/ induction cook top point (Make of switch and socket-Havells/ Legrand/ Anchor or any other approved make)

S/F of 2 nos of 6/10 amp modular switch and 6 amp 5 pin shuttered socket on 8 module GI box with modular base plate and modular cover plate in front, complete in all respect (Make of wire Finolex / L&T / Anchor / Havels / V Guard or any other approved make)

S/F of 4 nos of 6/10 amp modular switch and 6 amp 5 pin shuttered socket on 12 module GI box with modular base plate and modular cover plate in front, complete in all respect (Make of wire Finolex / L&T / Anchor / Havels / V Guard or any other approved make)

Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire-Finolex/L&T/Anchor/Havells/V-Guard/Great White/HPL or any other approved make)

2 x 1.5 sq.mm + 1 x 1.5 sq.mm in 20 mm dia

2 x 2.5 sq.mm + 1 x 1.5 sq.mm in 20 mm dia

4 x 4 sq.mm + 2 x 2.5 sq.mm in 32 mm dia

2 x 1.5sqmm(inv. Wiring)

16sq.mm 4 core

4 X 16sqmm

Laying of one number of PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of size not exceeding 25 sq.mm direct in ground including excavation, sand cushing, protective covering and refilling the trench etc. as required.

16/18 SWG pannel box 48 X 24 X 10 = 11520 sq. inch for single door made out of CR sheet of 16SWG and boarder angle frame to provide above pannel with proper space, hinges, and other accessories, hinged door must be painted one coated red oxide and two coat enamel gray paint.

Sq.inch

Supply and fixing of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 48 X 24 including cost of copper conductor and other fittings like gasket, screw, nut and bolt, insulating materials etc.

S/F of 63Amp four pole MCCB, 30KA in existing Panel

Supply and fixing of 63 A onload Changeover Switch-Disconnector in open execution (Conforms to IEC 60947-3, IS/IEC 60947-3)

S/F of coper bus bar 25 x 5mm with required size of insulating material and nut and bolts.

Supply and fixing of LED Indicator lamp

Supply and fixing of earthing with copper plate 600 mm x 600 mm x 3.15 mm thick ISI marked including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc (But with out charcoal and salt) as required

Exra for using salt and charcoal for G.I or copper plate earth as required

Supply and laying 8 SWG copper wire ISI marked at 0.5 meter below ground level for conductor earth electorde including soldering etc. as required

Providing and fixing 25 mm x 5 mm Copper Strip in 40 mm dia G.I pipe from earth electrode as required

Supply and fixing of following way Horizontal type TPN DB in recess, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3, IK 09 protection rating double door DB, available in CRCA sheet steel, RAL 9003, powder coated, Ready to sue DBs- Provided with 100A insulated phase bus-bars, netural bar/s with shround/s, earth bar/s, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identification labels With provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP MCBs as outgoings (Make- /L&T, Legrand or any other approved make)

4 way Horijontal TPN DB Double Door with MCB Incomer

Supply and fixing of following rating 240 V/415 V "C" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/Havells/ Legrand /L&T/C&S or any other approved make)

SP MCB 6-32A C-series

FP MCB 6-32A C-series

Supply and fixing of A.C Ceiling fan 48" size, Minimum Air delivery-210 cum/min, 340rpm, BEE 5 star rated (Make- Havells ES 50/ Crompton HS Plus or any other approved make)

Supply and fixing step type Modular fan regulator with wiring complete in all respect as per direction of engineer in charge. (Make- Havells/ Cona/ Anchor or any other approved make)

Supply and fixing of 18watt Led batten polycarbonate body tube light, Luminousity: 100 lumens, Clour Temperature: 6500 Kelvin. (Make- Havells/ Philips/ Crompton/ HPL or any other approved make)