REPAIR REPLACEMENT IMPROVEMENT OF PERIMETER HIGH MAST LIGHTS SECURITY LIGHTS, INCL ALLIED WORKS IN THE AOR OF GE (WEST) PATHANKOT

Amount

Attending of day to day street/ Security / high mast lights of 12 mtr complaints received through telephone or in person and rectification of defects in street light like HPSV, HPMV, MH,LED Flood light fittings of any make installed on street light poles 9/11 mtrs long , buildings walls roof by bringing down the fittings on ground or in position by replacing unserviceable items including cleaning /acrylic cover for clear reflection of light, further replacement of old unserviceable street light fitting with new fittings (Contractor will provide veh, ladder , tools & takels required at site):- Note:- (i) items replaced shall be measured and paid seperately under respective items as supply only. (ii) Complaints shall be attended and rectified within 24 hrs of receipt of complaint. (iii) Lights on one pole repaired shall be treated as one complaint. (iv) Old retrieved material shall be deposited in AGE E/M yard and will be given to contractor after completion of contract. (v) If the complaint is not attended with in 24 hrs, a penalty of Rs. 100/- per complaint for first 24 hours and Rs. 50 for every next 24 hours shall be levied to contractor.

All as per srl item no. 1.00 but for 15/20/ mtr high mast light

Supply only LED street light fitting of 45 watts, 5700k, IP 66 power factor >0.95, IK-08 having 120 lm/watt efficacy with invidual lens cover on each LED, rendering index > 70, 4 KV integrated surge protection, external 10 KV surge protection potted driver, tougned glass cover in high pressure die-cast powder coated aluminium housing and making connection using 3 core fleaxible copper cable complete all as specified and directed by Engineer -in-charge.

All as per srl item No. 3.00 above but 60 watt

All as per srl item No. 3.00 above but 70 watt

All as per srl item No. 3.00 above but 90 watt

All as per srl item No. 3.00 above but 120 watt

All as per srl item No. 3.00 above but LED flood light 150 watt, 6000K

All as per srl item No. 3.00 above but LED Bay light fitting 150 W LED, CCT not less than 6500 K. Note :- For item no. 3.00 to 9.00 :- a) Operating temperature of fitting shall be -10 to 50 C and voltage range of 120 V-270V. b) Make of LED shall be Cree, Nichia, Osram. c) LM-79,(not more than 1 year old) LM-80 reports for fitting are mandatory. d) The fitting shall have minimum 50000burning hours with LM 70 report. e) BIS stamp is mandatory on fixture & driver.

S & F in replacement potted driver with 4 KV surge protection suitable for street / Flood light fitting of size 25 W - 45W of make as per ground requirement and complete all as specified and directed

All as per srl item No. 10.00 above but size of 60 W - 70W

All as per srl item No. 10.00 above but size of 90 W - 120W

All as per srl item No. 10.00 above but size of 130 W - 150W

S & F in replacement external surge protection of 10 KV complete all as specified and directed

S & F in replacement power contractor 3P, 25 A complete all as specified and directed

S & F in replacement MCB SPN 6 - 32 Amp complete all as specified and directed

M&L in replacement for bracket for fixing of street light fittings bend to shape, made out of 32 mm dia GI pipe medium grade upto 1.5 mtr long fixed with and including two sets of MS clamp made out of Flat iron of size 50x6 mm, fabricated to shape and fixed with nuts, bolts & washers & two coats of aluminum paint over a coat of red oxide primer on iron component complete all as specified and directed by Engr-in-charge.

S&F in replacement three core Aluminium conductor PVC insulated cable of size 6 sqmm FR multistranded 1100 volts grade complete all as directed by Engr-in-charge.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of cable ,pole foundation,stay,laying of pipe etc complete all as specified and directed.

All as per srl item No. 19.00 above but depth exceeding 1.5 mtr and not exceeding 3 mtr.

Returning filling in, including spreading ,leveling ,watering and well ramming in layers not exc 25 cm complete all as specified.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified

Brick covering with width equal to length of brick as mechanical protection to cable with well burnt sub class 'B' bricks laid complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 mtr and deposting where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, in replacement of cross-sectional area 16 Sqmm, 2 core including taking down of old UNSV cable complete all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, in replacement of cross-sectional area 10 Sqmm, 2 core including taking down of old UNSV cable complete all as specified and directed.

M&L for GI tubing light grade 50 mm bore for cable protection laid in trenches in road crossing or fixed to wall/Pole complete all as specified and directed.

M&L for Prestressed concrete pole, 9.0 metres long 102mm x 152mm at top and 102 mm x 289 mm at bottom, class 10 in replacement including dismantling of old UNSV pole , numbering new pole and applying two coats of synethic enamel paint upto 1.5 mtr from top of coping for black and white strip alternately each 30 cm wide complete all as specified and directed. (Note: Earth work including excavation, Returning filing, PCC work, removing excated material will be measured and paid separetly under respective items of schedule)

M&L for PCC 1:4:8 type D-2 ( Using 40mm graded stone aggregate ) as in foundation of poles filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 ( using20mm graded stone aggregate) as in foundation of poles/coping, stay etc complete all as specified and directed.

M & L in replacement for cable junction box made out of polycarbonate duly powder coated in grey colour, of size min 150 X 200 X 75 mm shock proof, termite proof, weather proof, UV-resistant, temperature resistant, IP 66, IK 09, with aluminium bus bar terminals, suitable to have MCB SPN and entry / exit of XLPE cable upto the size of 35 Sqmm 2 core, fitted on pole with clamp made out of 20 X 2 mm strip complete all as specified and directed by Engr-in-Charge

S & F in replacement automatic street light timer switch single phase, suitable to take load of minimum 3 kw, 230 V based on weather proof photoelectric timer adjustable upto min 10 lux , alongwith suitable power contactor & MCB 20 Amp on both input and output duly prewired with suitable size of copper wiring with proper lugs and terminal blocks with facility of manual ON/OFF switch complete enclosed in polycarbonate IP 66 enclosure shock, rust, weather & termite proof uv-resistant, FR grade fixed on pole with MS strip of size 20 X 2 mm complete all as specified & directed by Engineer -in -charge

M & L for painting of steel tubular pole including clamps and other MS item etc complete on pole with two coats of aluinium paints after preparing the surface dirt/ grease free all as specified and directed by Engr -in -charge

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 44,600.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 3% (Three percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

M/S SATPAL & BROTHERS

Substantial Const. Co.

M/S NILESH ENTERPRISES

M/s. Aggarwal Engineers