REPAIR MAINT OF EM INSTALLATION FLOOR AND WALL TILING INCLUDING SANITARY FITTINGS AT BR I UNDER GE AF GORAKHPUR

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5mm thick on faces of brick work or concrete surfaces CM 1:3, as in ceiling, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on faces of brick work or concrete surfaces CM 1:4, and finishing the surface even and smooth without using extra cement complete all as specified and directed.

Demolition of brickwork built in cement mortar including quoins, arches, pillar etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling & applying two coat white wash complete as specified.

M&L for preparation of new surface of wall and applying two coats oil bound distemper over and including 1mm thick birla white wall care putty complete all as specified and as directed..

S& F in repairs butt hinges 100 mm mild steel bright finish complete all as specified and directed at site.

Dismantling Asbestos cement /steel sheet (corrugated, semi corrugated, etc. ) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum SMP coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in repairs fancy type, chromium plated long body bib taps, for kitchen sink cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore complete all as specified and directed (Make JAQUAR CAT PART NO KUP-35037PM/Equivalent to CERA or PRAYAG make .

Supply and fixed in repairs cast copper alloy chromium plated fancy type angle cock, of 15 mm bore complete all as specified and directed MAKE JAQUAR CAT NO AQT-CHR-3057/ EQUIVALENT TO CERA or PRAYAG.

S&F in repairs 15 mm bore pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete MAKE JAQUAR CAT NO ARI-CHR-15011BPM/EQUIVALENT TO CERA or PRAYAG.

S&F in repairs gun-metal stop cock 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repair 32/40 mm plain transparent type PVC waste pipe fixed to WHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should not be less than 0.70RM)

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed.

S&F in repairs wash basin, Vitreous China white flat back of size 550x400mm including 32mm bore Chromium plated waste fitting cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and porcelain stopper but including brackets MAKE JAQUAR/CERA/PARRYWARE.

S&F in repairs Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed (Make CERA/PARRYWARE/HINWARE)..

Supply and fix in repair PVC 10 Liters valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all as specified and directed MAKE CERA/HIDWARE/PARRYWARE.

Dismantling floor, hearth or wall ceramic tiling including cement mortar bedding and rubbish off the premises complete all specified and directed

S & F non skid coloured ceramic tiles 7 to 8mm thick(square / rectangular ) area of each tile exceeding 0.11sqm and n exc 0.16 Sqm , in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cm 1:6 etc complete all as specified and directed.

S&F Glazed ceramic coloured tiles in vertical surface 350 x 250mm x 7/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match tiles over 10mm thick backing coat in cm 1:4 complete all as specified and directed.

S&F SWR floor trap plain with grating including jointing to waste pipe with solvent cement joint dia of out let 75mm complete all specified and directed.

S&F in repairs PVC Grating doom 125 mm dia with waste hole complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed..

M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, doors or gates, ladders, framed balusters, walk ways, railings, frame work of water tanks etc ant type of work complete all as specified and directed. Fe 410 -W (Gde- E- 250) quality-A

S&F expended metal cut to length bent to shape required and tying with incl. Annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples and weight exc. 4Kg /Sqm etc all as specified.

M&L for preparation of old decorated surfaces of wall and applying one coat of exterior emulsion paint Ist quality complete all as specified and directed. Note:-Painting shall be done up to 21 mtr height of overhead tanks and quoted rate shall be including of required scaffolding or arrangement also.

Demolition of cement concrete un-reinforced in ground floors and paving not exc 15 cm thickness (below or above ground) level complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4, type B-1 using 20mm aggregate as in floor surface finished even and smooth without using extra cement all as sfd and directed.

M&L 75mm thick cement concrete type D-2 (1:4:8) 40 mm graded aggregate as in sub base all as specified.

M&L Hard core of gauge Broken stone or boulders n exc. 63mm,deposited,spread and leveled in layers n exc15cm thick watered and rolled/rammed to a true surface

M&L for cement concrete (1:4:8) type D2 in foundations filling and mass concrete

M&L 60mm thick Machine pressed precast concrete interlocking paver block (Coloured) any shape and size conforming to IS 15658 -2006 M-35Grade.

M&L 30mm thick sand cushioning under interlocking tiles

M&L Type B0 1:2:4 (12.5mm graded aggregate) Providing cement concrete in roof Krebs or mud stops rounded or chamfered on edges

Removal of excavated Material to a distance exc. 250 m but n. exc. 500m and depositing where as directed at a level n. exc. 1.50m above the starting point complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including fascia, cornices etc by scrapping with mechanical sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for Providing and applying minimum 1mm thick BIRLA/JK wall care putty over prepared surface to achieve the surface even and smooth for painting.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm. Note- Primer and emulsion to be carried out through air less spray machine ( Mechanical means)

M & L for preparation of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enameled paint complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4, all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed.

M&L double charged coloured tiles 7 to 8 mm thick ( square/rectangular) area of each tile exceeding 0.16sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured of tiles including laying of screed bed or bedding layer of mortar 15mm thick in cm 1:6 complete.

M&L for 20mm thick granite stone (any type of work) in steps, jambs, pillars, cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L Machine cut Plolished kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in CM(1:6) complete

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with over 10mm thick screed bed in CM(1:3) complete

M&L for chamfers, splays or arris of granite in face work exc. 15mm but n. exc 50 mm wide complete all as specified and as directed.

Taking down rain water / vent pipe of any description including fittings etc. including removal to store, complete all specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall or laid in floors.

Ditto all as per item above but 75 mm bore.

S&F 110mm bore PVC (SWR) bends, of any radius provided without access door.

Ditto all as per item above but 75 mm bore.

S&F 75mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete.

S&F 100mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including securing ends of stays to wall or roof complete.

S&F in repairs bottle trap of PTMT having minimum water seal of 25mm (min weight 32mm-260gms/ 40mm 270gms)

S&F in repair soap dish any type fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F in repair kitchen sinks with drainage board overall size 915mm x 460mm bowl size 410mm x330mm x116mm, made of stainless steel 1 mm thick with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed MAKE PRAYAG/NIRALI.

S&F in repairs chromium plated shower roses with or without swivel joints, any size incl fixing to steel pipe or union complete MAKE JAQUAR CAT NO OHS-CHR-1709/EQUIVALENT OF CERA or PRAYAG.

S&F in repairs 15 mm bore wall mixture fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered ' Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete MAKE JAQUAR CAT NO ARI-CHR-39119/ EQUIVALENT TO CERA or PRAYAG.

S&F in repairs 1 mm thick stainless steel utensil rack of size 600x900mm and fixing to wall with screws complete all as specified.

M&L in repairs 80mm thick Machine pressed precast concrete interlocking paver block (Coloured) any shape and size conforming to IS 15658 -2006 M-35Grade.

ANIRUDH ENTERPRISES

Matrubhoomi Construction

Hindustan Traders