Day to day Carpentry maintenance work at Dankuni Coal Complex

Amount

The following jobs will be carried out by engaging 01 Skilled and 01 Unskilled Labour on daily basis except on sundays and Holidays (The estimate is based on minimum Central wages notified by CLC as on 01.10.2023) CPWD-21

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood. [IT NO- 9.1.3, PGNO- 182]

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. Non decorative finish (matt finish) [IT NO- 9.142.1, PG NO-206]

Ply wood 5 ply with commercial ply on both faces 6 mm thick [IT NO- 2412, PGNO-172]

18 mm thick block board with commercial ply veneering on both side. [IT NO- 2414, PGNO - 172]

Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete. 75x47x1.70 mm. [ IT NO- 9.57.3, pg no-190]

Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete : 100x58x1.90 mm [IT NO- 9.57.2, PG NO- 190 ]

Providing GI Net on Wooden Frame

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100x10 mm [IT No- 9.97.5, pg no- 196]

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm [IT No- 9.97.4, pg no- 196]

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x16 mm [IT No- 9.62.2, pg no- 191]

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm. [IT No- 9.100.1, pg no- 196]

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes .[ IT No- 10.30.1, pg no- 228]

Providing Aluminium Sheet ( 2.5 mm)

Providing Pelmed Rod

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws [ IT No- 9.21.1, pg no-186]

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work [IT No- 13.99.1 , pg no- 288]

PART - B Attending Complain day to day as per direction of Engineer In Charge

Total impact of GST for the purpose of CTC

The Morning Glory

M/s Aristo engieering co