PROVN OF CERTAIN SANCTION WORKS IN THE AREA OF AGE B/R-I AND AGE E/M UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc up to 10m height incl remove all debris in 2 KM form site complete all as specified and directed.

Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks,old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces, applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.

M&L Rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L Rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of priming plastered and other surfaces with alkali resistant priming paint complete all as specifed as direted by Engr-in-charge.

M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly/plastered surfaces(internal) of walls complete all as specified and directed.

M&L for old decorated surfaces plastered or unplastered surface of wall complete removal of existing treatment brooming down , rubbing , scraping and washing with water etc and applying two coat of oil bond distemper over one coat of wall care putty on wall complete all a spcefied.

M&L for preparation of old decorated plastered surfaces of walls, brooming down,washing with water etc and applying two coat of cement based paint over one coat of putty up to 10 m height complete all as specified and directed.

M & L for applying newly plastered surfaces of wall and applying three coats of whitewash on newly plastered surfaces(internal) of walls complete all as specified and directed.

Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring and refixing the same including fixture as necessary at site including frame work

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 475 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame)

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame)

S&F for fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame and fixing with ancher bolts all as specified and as directed.

35 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.

S&F factory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made

S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked)

S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked)

S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked).

: S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked)

S&F aluminium ventilator partly glazed/ gauzed including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, fixed wire mess and 3 mm thick tined frosted glass of superior quality etc. provision for fixing the exhaust fan complete all as specified and as directed

M & L for aluminium alloy Powder coated window grill standard 10mm section and opening of size window grill as per approved sample and as per IS specifications complete all as specified and as directed.

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed includind taking down and refixing of shutter as in repairs complete all as specified and directed.

S&F aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete, all as specified and directed.

S & F 18/19mm thick exterior grade Prelaminated particle board as in cup board shutter,incl 6mm thk teak wood leaping and necessary rebating for double shutter where reqd incl polishing to leaping complete all as specified

S&F continuous (Piano) hinges, mild steel bright finish or electro glavanised (width of flap when open 30mm)

M&L second class hard wood timber scantling plain fillets, square, rectangular or triangular in section clear swan, sectional area exc 13 sqcm & not exc 25 sqcm, secured with nails or brads.

S & F 75 mm Aluminium anodised handles, cast type

S&F figured glass pin head type 4mm thick ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane fixed with oil putty or wooden beads including provision of glazing pins/ spring clips wherever necessary, complete all as specified

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.

Supply and fix in repair vitreous china wash hand basin (with stands) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste cupling complete all as specified

Supply and fixin repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe ) complete all as specified and directed by Engr-in-Charge,

S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.

Supply only plastic water closet seat cover black closed pattern with flat bottom end cover and mild steel chromium plated hanging device.

Supply only PVC low level white flushing cistern valveless syphonic action type 10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified.

S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete.

S & F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.

S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.

S&F in repairs Health faucet, CP brass with 1.50m long flexible pipe complerte all as specified and directed by Engineer-in-Charge.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S&F in Pillar taps,15mm dia fancy type with capstan heads,chromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts,screwed for iron pipe and fixed.

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

S&F for 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S&F for 20 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as directed.

S & F in repairs Chromium plated brass overhead shower with arm complete all as specified and directed.

S & F in repair concealed brass chromium plated stop valve fancy type suitable for 15mm bore of pipe with long shank and cup complete all as specified.

S&F in repair for Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws all as specified and as directed

Demolition of stone slab and tiles of any description or thickness in floor apron complete all as specified and directed.

M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match incl 15mm thick screed bed or bedding layers in cement mortar ( 1:6) complete all as specified and as directed.

S&F Non - skid Ceramic colour tiles 600 x600 x 7 to 8 mm thick in floors etc and 15mm thick screed bed 1:6 in cement mortar. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd.

M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and finishing over 20 mm screed bed in CM 1:4 complete all as specified.

M&L Machine cut kota stone slab flooring 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and finishing over 15 mm rendering in CM 1:4 complete all as specified.

Demolition of (reinforcement )concrete and pavings n.exc 15 cm thickness (below or above ground level)

Material and labour for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, cooking plateform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, perapet, shelves and the like complete all as specified and directed.

Supply and fix mild steel TMT bars, 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level)

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M & L for 75 mm thick plinth protection cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) surfaces finished fair and even without using extra cement, complete all as specified.

M & L for 40 mm thick cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in floor & surfaces finished even and smooth using extra cement, complete all as specified.

M&L for 75mm thick cement concrete type D-2 1:4:8 (40mm graded aggreate)in sub base, filling and mass concrete

M&L for machine pressed precast concrete interlocking paver block 80mm thick M-40 grade any shape and size with grey cement and pigment

S&F Cequered cement concrete tiles with grey cement and pigment 20cm X20cm X25mm thick set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation

S&F in repair 20 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of Stainless Steel tube for curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.

Dismantling tunframed timber scantlings 40sq cm and over in section in any position all as specified and directed

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; and staging of water tank fixed with angle cleats or other connecting plates complete all as specified and directed

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

S&F for stainless steel plate rack of size 90x80x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste cuppling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.

Material and labour for rotational moulded polyethylene water storage tanks white colour 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description

S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete.

S & F 100 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed

S & F 75 mm bore cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified & directed

S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete.

S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete.

S&F for 100 mm bore cast iron bends with door plate & tee complete all as specified and as directed.

S&F for 75 mm bore cast iron bends with door plate & tee complete all as specified and as directed.

S&F for 75 mm bore cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal Salt glazed stoneware drain pipes after they are laid and tested complete all as specified (thickness of concrete bed 150mm).

M&L for 150mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.

M&L PCC 1 : 4 : 8, type D2, using 40mm graded stone aggregates, as in foundation of manholes etc complete all as specified.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified.

M&L SFRC Factory made Precast cement conc rete manhole cover' area of each cover not exceeding 0.50 sqm 50 mm thick TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied

M&L for Dewatering and desludging of SWT/septic tanks of 200 users capacity using( mechanical device system) by dewatering sludge water and removing sludge/waste material and including if reqd demolition of slab and repaire of SWT tank cover etc. through container/tanker to a distance exc 5KM and complete all as specified and directed by the Engr-in-Charge.

Disconnecting existing 500 ltr tanks, setting a side (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

M & L for preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment., including plastering and leeping (whether full thickness emoved or only a part thereof) all as specified and directed.

M&L for PCC (1:2:4) type B0 using 12.5mm graded crushed stone aggregate as in levelling course laid to be minimum consolidated average thickness of 25mm, laid and complete in slope over roof, finished fair & even complete all as specified & as directed.

M&L for rendering 15mm thick on top of roof concrete incl taking in cement mortar 1:4 with water proofing compound at the rate of 3% by weight of cement to have a smooth surface for laying of water proofing incl taking down complete all as specified.

M & L for applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on top of roof surface in multiple coats @2 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and other coats needs to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. When the 2nd coat is wet, the Smartcare EPDM tape (at corners and edges)shall be inserted between second and third coat to secure corners & edges, let the material ooze out from the tapes corner. Same treatment of Smartcare Dampproof shall be continued to the parapet walls to better envelope the whole area. The coating shall be terminated carefully to the other side of the parapet wall. Notes for item Nos 108: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor immediately after placing of work order. (d) A guarantee amount of 5% of contract of work done for item No 108 of BOQ will be retained for 5 years of the completion of work.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in Hard dense Soil complete all as specified.Note; Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor

Excavation in trenches inany type of Hard dense soil not exc 1.5m wide and exc 1.50 mtr but not exc 3.00 mtr in depth for foundation etc and getting out in hard dense soil complete all as specified.Note; Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor

Excavation in trenches in any type of Hard dense soil not exc 1.5m wide and exc 1.50 mtr but not exc 4.50 mtr in depth for foundation etc and getting out in hard dense soil complete all as specified.Note; Most of the Excavation will be done manually and no extra cost will be paid to contractor seperately for manual excavation. If any UG Cables, Pipes are damaged during excavation,entire cost for restoration will be borne by the contractor

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose/disintegrated soil or rocks complete all as specified.

Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed.

M&L for cement concrete 1:3:6 type C-2 using 40mm graded aggregates for bedding layers laid DWCPE(SN8) 200(OD)/175(ID) pipes after they are laid and tested complete all as specified (thickness of concrete bed 150mm).

S&F DWCPE(SN8) 200(OD)/175(ID) mm dia pipes and Snap fit/ Push fit coupler with rubber ring/ gasket for joining incl testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with water proofing compound finished even and fair without using extra cement complete all as specified. (Water proofing compound shll be measure and paid separatelly).

M&L Mild steel Round/TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

M&L Providing pre cast RCC type B1 20mm graded aggregate 1:2:4 in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

Taking down carefully aluminium point wiring from wooden battan (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc).

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site complete all as specified and directed.

Taking down old submain wiring of any size and make from the site complete all as specified and directed.

M&L point wiring compete with1.5 sqmm single core insulated FRLS Cable unsheathed 1100 Volts grade with multi stranded copper conductor and drawing through & including non metallic rigid new PVC conduit medium grade ISI marked not less than 20mm dia and all conduit accessories concealed in wall on surface in ceiling / fixed to roof /truss/ columns etc and including provision of 1.5 Sqmm PVC insulated copper cable FRLS unsheathed as earth continuity, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches, socket out let and fan regulators etc, complete all as specified.

One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely)

One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

All as per item No 122 (b) but Same board.

One power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 2.5 Sqmm in and including new PVC conduit medium grade not less than 25 mm dia, stranded conductor as earth wire connected to dolly complete.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4 Sqmm size stranded conductor as earthwire..Note-Two runs of 6 sqmm cable and one run of 6 sqmm cable and one run of PVC condit shall be measured as one RM.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.Note-Two runs of 6 sqmm cable and one run of 6 sqmm cable and one run of PVC condit shall be measured as one RM.

S&F switch modular type 5 Amp SP one way ISI marked complete all as specified.

S&F switch modular type 15 Amp SP one way ISI marked complete all as specified.

S&F socket modular type5 pin 5 Amp flush type ISI marked complete all as specified.

S&F socket outlet modular type 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.

S&F ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

S & F electronic fan regulator 5 step,360 degree rotation 120W-2 module, ISI marked, complete all as specified and directed by engr-in charge.

M&L for earthing of machinery/equipment/panel/installed at power house/subatation, complete with galvanised steel earth palte electrode 600 x 600 cm x 6.3 mm thick buried directly in ground (Earth pit not less than 2.5 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to galvanised iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth protected by 40 mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No.3 of SSR Part-I )2009) and testing on completion all as specified and directed.

Supply & fix in repair factory made epoxy powder coated Distribution Board TPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 160 to 250 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar, cement spill protractor, door earthing, mechanical Impact Strength IK 08, neutral link earth link complete.

S&F MCB SPN 40 to 63 Amp "C " curve, 10 kA.

S&F MCB SP 6 to 63 Amp "C" curve ,10 kA.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 105 Lumens/watt and including connecting up with PVC sheathed 0.75 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures..

Supply and fix 10/12 watts PVC body bulkhead fitting with non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is >100lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 0.75 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repairs LED 2 X 2 ft backlite surface mounted fitting 36 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.

Taking down carefully the existing ceiling fan of 1200/1400mm from its position after disconnecting electric connection and making good surface deposits to MES store all as specified and directed.

S&F in repair sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 60 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.

S&F in replacement MCCB 160 A, 4 pole 36 ka MCCB, completely connected with copper thimble and with all accessories complete all as specified and directed.

Supply and fixing ceiling fans BLDC single phase 230/240 V of size 1200 mm sweep,Min, air delivery 210 CFM with service value 6.00 BEE with 5 star rating including making connection with three core flexible, copper cable pvc insulated of suitable length and marking of fan no with black paint complete all as directed by Engr-in-Charge.

Supply and lay cable in replacement XLPE insulated screened PVC bedded, galvanized steel strip and wire armoured , electric power cables (heany duty) 1100 volts grade with stranded alumimium conductor of size 25 Sqmm 3.5 core.

Provn of exhaust fans metal body AC single phase 230/240 V of size 450mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, metal body with louvre with louvre for fixing of exhaust fan complete all as directed by Engr-in-Charge.

Provn of fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.

M&L for breaking the old existing wall and making provn of a round hole for fixing of 300/450 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.

Schedule of Credit

M/S GR construction compony (BID ID -3368578)

M/s M M BAHL (BID ID -3368902)

M/S ANIL KUMAR (BID ID -3368830)