New construction work of the road from village band nagar to ramnagariya asharam in the fy 2025-26

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 as per Technical Specification Clause 303.1 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Cement Treated Subbase with 2% Cement Providing, Laying and spreading Material on a prepared sub grade, adding cement @ 2% by weight to the spread Material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of sub base. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Cement Treated base with 4% Cement Providing, Laying and spreading Material on a prepared sub base, cement @ 4% by weight to the spread Material manually, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strength and to form a layer of base Quantity of Cement assumed as 4% of quantity by weight for sub base I/C cost of material, labour, T&P and all Taxes but Excluding GST

Tack Coat :- Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. I/C cost of material, labour, T&P and all Taxes but Excluding GST

20mm thick Open-Graded Premix Carpet using Bituminous Binder :- 20mm thick Open-Graded Premix Carpet using Bituminous (VG-10) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of Type C as per Technical Specification Clause 508 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Seal Coat:- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 I/C cost of material, labour, T&P and all Taxes but Excluding GST

Water Bound Macadam Sub-base/Base W B M Grade-1 Providing Laying Spreading and Compacting Brick Bats of O.B.B. / 150 B.B. of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregates, watering and compacting to the required density grading 1 as per Technical Clause 404. I/C cost of material, labour, T&P and all Taxes but Excluding GST

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications Clause no.600,1202&1203 I/C cost of material, labour, T&P and all Taxes but Excluding GST