SE/MEDC/METRO/MDU-020/2025-26

Improvement works with allied Civil works

Chipping of the concrete and roughening the surface without any damage to the concrete portion including cost for clearing the debris, all labourers, hire charges for tools needed safety including cost for clearing the debiris, all labourers, hire charges for tools needs safetyarrangements all leads, lifts etc. Complete.

Dismantling of existing Terracing work in roof from existing flooring without any damage to existing structure the cost including cost of all materials, hire charges for tools and plants, clearing the debris away from the site, needed safety arrangements, all leads, lifts etc complete.

Clean removal of cement plaster from existing floor suface and removing of cement plaster wastages from office premises as directed by the site engineer including cost of all labours, materials, lead, lift, etc., complete.

Providing weathering course in pressed tiles of 20 x 20 cm size in CM 1:3 mix 12-20 mm thick over the brick jelly lime concrete (32 cft bricks and 12.50 cft of lime) to an average thickness is 8.0 cm with suitable slope and well beaten with wooden scantling, cost of all materials ,labour charges lead and lift etc, complete.

Providing 'Brick work in Cement Mortar 1:5 using II-Class burnt Bricks of size 9” x 4 3/8 x 2 3/4” including cost of all materials, leads, lifts, labour etc., complete.

Plastering with cement mortar 1:5 12mm thick for brick wall surface for outside and inside all levels, including cost of all materials, lead, lift, labour, T&P, curing, etc., complete.

Supplying and fixing vitrified tiles with best desgin double charged 600 x 600 x 8 mm size, as approved by site Engineer over in CM 1:3 mix -20 mm thick, using portable water for works and curing, including cost of all materials, labour charges lead &lift etc, complete.

Supplying and fixing Andi Skid flloor tiles with best desgin in 600 x 600 x 8 mm size, as approved by site Engineer over in CM 1:3 mix -20 mm thick, using portable water for works and curing, including cost of all materials, labour charges lead &lift etc, complete.

Suppling and fixing hand wash basin of 550 x 400 mm size with all accessories such as Cast iron Brackets ,32 mm dia CP wash coupling , rubber plug and chain ,32 mm dia 'B' class waste pipe ,15 mm dia GM wheel valve ,15 mm dia Nylon connection ,15 mm dia Brass Nipples, 15 mm CP pillar Tap etc., white with pedastal, cost of all materials , labour charges for fixing ,cost of furniture fittings as per the instruction of site engineers,including cost of all material, labour, lead, lift, etc., complete.

Supplying, aligning and fixing of 110 mm PVC rain water line (4 KG/Sq.cm) with necessary specials including including cost of all materials , labour, T & Ps ,lead, lift, etc, complete above ground level.

supplying, aligning and fixing of 75 mm PVC waste water line (6 KG/Sq.cm) with necessary specials including cost of all materials , labour, T & Ps ,lead, lift, etc, complete above ground level.

Supplying and fixing 25mm Dia CPVC pipes 10 kg/cm2 for water supply to toilet rooms, wash basin etc, including cost of all materials, cost of specials, labour charges for fixing in wall wherever necessary according to site conditions and as per the instruction of site Engineer ,lead and lift etc, complete.

Supplying and fixing of with good Quality of Chromium Plated Stop Cock 15mm dia including cost of all materials, labour for fixing lead, lift, etc., complete.

Supplying and fixing of PVC Screw Down Tap Heavy Type 15mm dia, labour charges for fixing ,lead &lift etc, complete.

Supplying and fixing of with good Quality of 23 mm Gun Metal gate valve including cost of all materials, labour for fixing lead, lift, etc., complete.

Removal of Existing damaged Window including removal of frames, hinges and fastenings

Fabricating, Supplying and fixng in position of steel glazed window (Two Leaves )with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 3mm thick pin headed glass and fixed with 15x12mm teakwood beading of superior quality and fixed with shutter frames.2 numbers of sturdy hinges and one number of handle to be fixed to each shutter. All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator)

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point.

Supplying and fixing of 1200 mm (48”) sweep AC ceiling fan complete with stepped electronic 300W regulator 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18") including cost of all materials, labour, lead, lift, etc., complete.

Supply and fixing of single box type 4'40W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting including cost of materials, labour charges, lead, lift, etc, complete.

White washing two coats with White cement approved quality over a primary coat over plastered surfaces including cost of all materials, lead, lift, etc., complete. (Celling)

Painting two coats with ready mix plastic emulsion of first class quality paint and approved colour over a priming coat including through scrubbing clean removal of dirt etc, complete and including necessary plaster owherever required - 10sqm (INNER)

Painting two coats with ready mix plastic emulsion of first class quality paint and approved colour over a priming coat including through scrubbing clean removal of dirt etc, complete and including necessary plaster of Paris, petty, wherever required - 10sqm (OUTER)

Painting all exposed faces of Country wood windows and Doors with enamel point over one coat of primary coat including cost of all materials,lead,lift etc completePainting for doors.

Painting two coat to all exposed faces with enamel paint for iron work after through scrapping (For old iron works) over one coat of primary coat including cost of all materials, lead,lift etc complete.

Supply of MS square section pipes to vertical and horizontal support for the fabrication of Galvalume colour sheet of size 0.47mm for window sunshades including cost of all materials, labour, lead, lift, etc., complete.

Providing Galvalume colour sheet of size 0.47 mm for sunshades including J bolts & Hooks on roof, Frame, labour, cost of allmaterials, lead, lift etc., complete.

Supplying and fixing MS Angles for ladder with necessary specials including cost of all materals ,labour ,T&P,s leads,lift,etc,Complete.

Providing two legged scaffolding using 15cm blue cum postsor casurinaposts or bests quality bamboo posts of 4m over all length (3.0mt height +0.5m projection+0.5m into the ground) the distance between the two rows being 2.25m and the spacing of posts being in both the rows with two horizontal posts with 0.50m overlap on either side and braces @ 2m c/c including longitutional and transverse middle braces to setup and providing a platform with country wood planks of 40mm tk 1m width etc in a complete form using coir and nails 1m run including cost of all material, labour, lead, lift, etc., complete.

GST for bidders within Tamilnadu

GST for bidders outside Tamilnadu

Please Enable Macros to View BoQ information