Bifurcation of 11 KV Kawdiya feeder from 33 by 11 KV Sub Station Nawapur in Bhainsdehi Dc 11 KV Line 7 Km, 11 KV DP 08 No, 11 KV BAY with VCB 01 No

140 Kg.,8.0 Mtrs. long PCC pole

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

ACSR Panther Conductor as per specifications.

11 KV Composite Polymer Disc Insulators

33 KV Composite Polymer Disc Insulators

11 KV Strain hardware (T&C type) fittings

11 KV Polymer Pin Insulator

11 KV Pin Insulators

9 KV Gapless type(5 KA) polymer lightening arrestor

11 KV.C.Ts.(Outdoor dry type) 200-100/5 Amps

11KV/110V, CT/PT 200-100 / 5 Amp, Outdoor Oil Immersed Type

11 KV Single Phase PTs. (Resin Molded)

11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories

11 KV, ISOLATOR 800 AMP.(Turn and twist type)

11 KV control & relay panel with static relay for feeder protection

3Ph 4W 3x63.5V lb=5A Imax=10A, HT trivector meter,0.5s,DLMS cat-A,GSM(S/s meter)

Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured)

Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured)

Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured)

Stay set complete without Stay wire 16 mm. (Painted)

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

STAY WIRE 7/3.15 MM.(7/10 SWG)

STAY WIRE 7/3.15 MM.(7/10 SWG)1

H-Beams 152 X 152 mm., 37.1 Kg./Meter 11 Meter. Long

H-Beams 152 X 152 mm., 37.1 Kg./Meter 9 Meter. Long

D.C. Cross-arms 8' Channel (100x50x6mm)

G.I. Wire 4.0 mm. (8 SWG)

G.I. Wire 5.0 mm. (6 SWG)

D.C. Channel 100x50x6mm 4.8 mtrs center to center

Danger Boards Enamelled 11 KV

Danger Boards Enamelled 33 KV

11 KV AB Switch Polymer type 400 Amp with Complete fitting

11 KV Guarding channel 75x40x6 mm

11 KV Top clamp 65X65X6 mm. angle type

11 KV 'V' cross-arms galvanised angle 65x65x6 mm 11 Kg SET

Aluminium binding wire and tape

Aluminium paint

Anti climbing devices

Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Back filling of poles with boulders.

Bracing/Support angle of 65x65x6 mm for 8' (2.4 mtr ) centre DP

Clamp for 140 Kg PCC Pole MS Flat 50x6 mm1

Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth

Concreting of PCC support @0.05 cmt. per pole for base padding.

Concreting of PCC poles @ 0.45 cmt. (Cubic Metric Ton) per pole

Concreting of Rail / Hbeam supports @0.65 Cmt.per pole including muffing of pole

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Concreting of structures & foundation (1:3:6)

Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole

H.Beam Back Clamps 65x8mm Flat

I. Bolts 16 mm

Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor

M.S.Nuts and Bolts

Marshelling box with 10 no. connectors

MS strain plate 65x8mm 250mm long

P&F perfo cable tray 300 wide,2 thick fix 45x45x5 MS angle grouted CC 1:24

Red oxide paint

SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB

Stay Insulators 90X65mm

Stone Block/Pre cast block for base pedding(450X450X75MM)

T Clamp For 33kv & 11kv Bus, Substation

ISHWAR SINGH PATEL

YUVRAJ ELECTRICALS

NIRBHAY DAS MUKATI