SPL REPAIR TO BLDG NO T-11 (DINING HALL) AND T-11C (COOK HOUSE) OF 252 AD BTY UNDER GE (WEST) AGRA

Amount

Dismantling wooden framed roof truss not exc 10 m compled span all as specified and directed

M&L roof truss (framed) trussed, purlins, crane gantries, rails and fasterning and heavy bracket framing (Beam, tee, angle, M S plates etc including steel primer coat, welding, distnace pieces cleats etc confirming to Fe290 grade E-165.

Dismantling timber scantlings 40 Sq. cm and over in section and in any position complete all as specified & directed.

S&F rolled section as in main and cross beams hip and angle, jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc including steel primer coat, welding, confirming to Fe290 grade E-165.

Dismantling Plain or corrugated steel sheeting/galvatume aluminum, any gauge, thickness, including screw, L type or J type hooks or cranked bolts etc complete all as specified and directed

Dismantling asbestos cement (corrugated senmicorrugated ,etc) sheets in roof covering including L type or J type hooks or cranked bolts etc complete all as specified and directed

S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washer as specified.

All as per above Item No 07 but except Sheeting (Any thickness)

S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet for ridges 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with washer as specified.

Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thickness below or above the ground level, removing rubbish off the premises.

Demolition floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises.

M&L for 25 mm thick cement concrete type B0 1:2:4 using 12.5mm graded aggregate as in floor complete all as specified and directed

M&L Machine cut 20-25 mm thick kota stone with white marble strip as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing over 20mm thick screed bed in CM (1:4) as in floor complete all as specified and directed.

M & L for Machine cut & polished smooth surface of kota stone slab 18-20mm thick as in skerting, including 10 mm thick cement mortar screed bed 1:4 fix in position etc complete all as specified and directed.

M & L for mirror polishing with machine on existing kota stone/stone work including rubbing where ever required to give high gloss finish complete all as specified and directed.

M & L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes

M&L for coloured Non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including screed bed or bedding layer of mortar 15 mm thick in CM (1:4) for laying floor finishes.

M&L for coloured glazed ceramic tiles in vertical surface Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick screed bed in CM 1:4 as in verticle surface etc complete.

M & L for 20 mm thick granite (of any type/colour) work (table rubbed and polished) in cooking slab, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including fixing in wall, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame.

S & F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners or 6 mm dia G.I. Hangers adjusting level fixed to roof truss/purllin in any height and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre, complete all as specified and directed by Engr-in-charg.

Demolition of brickwork built in cement mortar including all quoins arches pillar etc.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each, removal to store complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm and not exc 4.00 Sqm each, removal to store complete all as specified and directed.

S & F steel windows with side hung shutters with using 'Z' steel section without glazing bars including projected box type hinges, tower bolt, steel handle, steel peg stay, steel flat etc dovetailed or welded complete all as specified and directed.

S & F steel windows with side hung shutters using seel section with glazing bars including projected box type hinge, tower bolt, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed.

S&F anodised aluminium frame for doors, windows ventilators with one or more rebate including joining cleats, screws, for fixing etc complete all as specified and directed.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc complete all as specified and directed.

S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc complete all as specified & directed.

S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed.

S&F mortice lock, vertical type size 75 mm brass with 4 levers for aluminium shutters.

S & F for 5.5 mm thick sheet glass ordinary quality and glazing for door shutters, exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F for solar control film 25 micron reflective type (garewere sun control or equivalent) over 5.5 mm thick sheet glass, ordinary quality and glazing with complete accessories exceeding 0.50 Sqm in each pane complete all as specified and directed.

S & F aluminium (extruded body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed

S & F steel window or ventilators fixed type, with glazing bars & steel flat etc, complete all as specified and directed.

S&F framed work such as guard bars, grills, hold fast etc and similar work including welding/reveting confirming to Fe-290 Ged E-165 complete all as specified and directed.

M&L for framed work as in doors and gates of angle or other section including welding/reveting, stringers, braces etc complete drilled for fixing of steel sheeting or other coverings to doors etc conforming FE-410-W

M & L for two coat of synthetic enamel paint on new steel surface over one coat of red oxide primer complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20mm graded stone as in bed block and copping, post hole and benching embedding of hold fast etc complete all as specified and directed

M & L for 35 mm factory made shutters (2nd class hard wood) plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

M & L for 30 mm thick 2nd class hard wood glazed and skeleton shutters incl door spring/stoper, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc

S&F Butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed.

S & F 250 mm Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc.

S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard rubber, drawn steel spring, fixed in door

S & F mild steel 300 mm, ordinary rat tail rod pattern springs (helical door spring) including roller and roller plate complete all as specified and directed.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed

S & F in repair Harrison rails, mild steel, chromium plated including brackets, stops, rollers etc

M & L for preparation & two coat of synthetic enamel paint on new wooden surface over one coat of pink primer complete all as specified and directed

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with wate, including necessary scaffolding etc.

M&L for 15mm thick rendering in CM 1:6 on concrete, brick/stone surfaces of wall finished even and smooth, complete all as specified and directed.

M&L for rendering 15 mm thick on concrete/ brick/stone surface wall in cement mortar 1:4 with wpc, finished fair and even, complete all as specified and directed. Note:- WPC shall be measured and paid separately .

Supply only integral water proofing compound (Liquid).

M&L for applying two coats of oil emulsion distemper by using roller device over a coat of 1mm wall care putty on new plaster surface

M&L for applying two coats of cement based paint on new plaster surfaces including preparation, complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions including complete all as specified and directed.

M&L for applying two coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces, complete all as specified and directed .

M&L for applying two coats of white wash on old decorated plastered /unplastered wall surface including preparation complete all as specified and directed

M&L for applying two coats of oil emulsion distemper by using roller device over a coat of 2mm thick wall care putty on old decorated surface including complete removal of existing treatment

M&L for washing, rubbing down of old decorated plastered or un-plastered surface of wall and applying two coat of cement based paint on old decorated surfaces.

M & L for applying two coat of synthetic enamel paint on old painted wooden surfaces of any description having width/girth exceeding 10cm including preparation of surfaces by complete removal of existing treatment complete all as specified and directed .

M & L for applying two coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10cm including preparation of surfaces by complete removal of existing treatment complete all as specified and directed

Taking up or down 20 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed.

Taking up or down 15 mm bore dia steel tubing and connections, including removal to store/ site complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 20mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

M&L PCC 75 mm thick 1:3:6 type C-1 using 20 mm graded aggregate for plinth protection and sub base of chequered tiles etc.

M & L for chequered cement concrete colour tiles 30cm x 30cm x 25mm thick, set, jointed with white cement & pigments and pointed in neat cement slurry including screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying in floors.

S&F in repairs vitreous China Orrissa pan with integral foot rest size 580xmmx440mm white with ‘P’ or ‘S’ trap front or back inlet and foot rests any pattern fixed in repair all as spfd including concrete bedding complete all as spfd and direrected.

S&F in repairs low level flushing cistern of capacity 10 litre ISI marked complete with inlet ball valve, and handle including bracket of Commander/Hindware/ complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets, waste pipe,complete all as specified and directed.

S&F for sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mmx330mm x160mm

S&F in repair vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe)

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F in repair 15mm bore dia Pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S & F in repair 15 mm chromium plated Bib taps fancy type cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed (15mm bore dia of pipe) complete all as specified and directed.

S & F in repair 15 mm chromium plated Stop valves fancy type (angle valve) cast copper alloy screwed down high pressure with crutch or but terfly handle screwed both ends for iron pipe or for unions and fixed (15mm bore dia of pipe ) complete all as specified and directed.

S & F in repair 20 mm ball brass valves,high pressure (float valve),with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed

S & F in repairs PVC connections 15 mm size with PTMT nuts of length 750 cm complete all as specified and directed.

Dismantling water tanks and removing to store capacity of water tank exc 500 & n exc 1000 litres.

S & F rotational moulded polyethylene three layer water storage tanks with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I capacity of water tank 1000 litres.

Taking down carefully copper/aluminium point wiring on batten/ PVC conduit (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc, including removal and making good disturbed surfaces of walls, ceilings etc by cement/ colour /plaster to match with the existing location spot complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multi stranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and Including rigid PVC conduit medium grade, concealed on wall portion and with stove enameled steel conduit medium grade on steel structural truse/ RCC roof ceiling portion surface type fixed with sadlles, screwes as per Engr practices of suitable size but not less than 20 mm bore with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0 mm thick ISI marked plastic laminated sheet cover for fixing switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/street/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per item No-88 here in before but One socket outlet 5/6 Amps on independent bd controlled by one switch complete all as specified & directed.

All as per item No-88 here in before but One socket outlet 5/6 Amps controlled by one switch on same board with other switches complete all as specified & directed.

All as per item No- 88 here in before but using 2.5 sqmm PVC FRLS insulated stranded copper cunductor cable and for one socket out let 3/6 pin, 15/16 Amps controlled by one 1 way switch on independent board complete all as specified & directed. NOTE-For item no 2 to 6 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fix switch piano, flush type, single pole, 5/6 Amps one way, 230 volts complete all as specified and directed.

Supply and fix switch piano, flush type, single pole, 15/16 Amps one way, 230 volts complete all as specified and directed.

Supply and fix socket outlet, 5/6 Amps, flush type, 5 pin 230 volts complete all as specified and directed.

Supply and fix socket outlet, multi-purpose 3 pin 5/6 Amps and 3 pin 15/16 Amps complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fitting complete all as specified and directed.

Supply & fix rotory stepped type electronic fan regulator mini flush type 100 watt 230 Volts complete all as specified & directed.

Supply & fix in replacement, single pole and neutral sheet metal enclosure (AC box) with a two pin & earth plug and socket with one no. MCB SP of capacity 20 Amps 240 volts IK-08 As per IEC 61439-3 complete all as specified & directed.

M&L for point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5 sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, to be terminated in and excluding modular metal GI flush box and its cover plates for fixing modular type switches/ socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/ fan/bell point controlled by 1 one way switch 5/6 Amps complete all as specified & directed.

All as per item No-101 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on the same board with other switches complete all as specified & directed.

All as per item No-101 here in before but point wiring for one modular socket out let 3/5 pin, 5/6 Amps controlled by one 1 way modular switch on the independent board but not below the switch board of light points with other switches complete all as specified & directed.

All as per item No-101 here in before but point wiring for one six pin socket outlet 15 & 5 amps (independent) controlled by one modular switch using PVC FRLS cable of size 2.5 sqmm complete all as specified & directed. NOTE-For item no 10 to 15 -: (i)The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillers etc for concealing the conduits to required depth & making good the disturbed surfaces in cement mortar 1:4 including finishing the surface to match with the existing surface.The portion of point wiring at RCC Coloumns/Beams/Ceilings etc shall be in surface conduit of suitable size fixed on surface with using PVC rawl plug and provision of covering terminal boxes/junction boxes of any shape and size with 3 mm thick bakelight laminated sheet fixed with suitable GI screws and cup washers. (ii) Fittings like switches,sockets,regulators,lamp holders,light foittings shall be measured and paid for separately under appropriate item of schedule A. (iii)The size of conduits shall be determined on permissible no of runs of wires as specified in SSR part-I clause 19.125 (B).However minimum size of conduit shall be 20 mm dia (medium grade)

Supply and fixing modular metal GI flush box 1/2 module as per site requirement suitable for 20mm dia conduit with and fixed on walls in CM 1:4 and making good the disturbed surfaces of walls as per existing complete all as specified and directed.

All as above item No -106 but modular metal flush box of 3 module complete all as specified and directed.

All as above item No -106 but modular metal flush box of 4 module complete all as specified and directed.

All as above item No -106 but modular metal flush box of 6 module complete all as specified and directed.

All as above item No -106 but modular metal flush box of 2 x 6 module complete all as specified and directed.

Supply and fix modular white cover plate with frame 1 module for mounting modular switches,sockets and regulators etc complete all as specified and directed.

All as per above item No. 111 But modular white cover plate with frame 2 module complete all as specified and directed.

All as per above item No.111 But modular white cover plate with frame 3 module complete all as specified and directed.

All as per above item No.111 But modular white cover plate with frame 4/5 module complete all as specified and directed.

All as per above item No. 111 But modular white cover plate with frame 6 module complete all as specified and directed.

All as per above item No. 111 But modular white cover plate with frame 2x 6 module complete all as specified and directed.

Supply and fix switch modular type, single pole, 6 Amps one module,one way, 230 volts complete all as specified and directed.

Supply and fix socket outlet, 6 Amps, modular type, 2 module 230 volts complete all as specified and directed.

Supply and fix switch modular type, single pole, 16 Amps one module,one way 230 volts complete all as specified and directed.

Supply and fix socket outlet, 6/16 Amps, modular type, 2 module 230 volts complete all as specified and directed.

Supply & fix rotory stepped type electronic fan regulator modular type,Single module 120 watt 230 Volts complete all as specified & directed.

S&F for ceiling rose surface bakelite 50 x 25 mm size 3 terminals complete all as specified and directed.

Supply & fix commiosnig and testing of complete power cum starter unit compressing of ON/OFF switches socket 3 pin socket outlet with plug top modular type made out of white polycarbonate, fire retardant, UV stabilized power unit internally pre-wired with suitable size copper conductor cable with overload protective device (MCB) complete unit fixed in single polycarbonate housing with inlet & outlet cable port suitable for AC & geyser operated at single phase, 240 volts, 50 Hz AC supply of capacity 20 Amps load bearing capacity complete all as specified and directed.

Supply and fixing LED Bulb 15 watt, single phase, 230 Volts AC supply suitable for lamp holder complete all as specified and directed.

Supply & fix surface/wall mounting LED batten 20 watt luminaire having extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with mounting accessories complete with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed.

Supply & fix, surface/ ceiling mounting type 34 watt LED luminaire PLUTO NEO PENAL 2X2 environmental friendly new generation aesthetically ultra modern recess mounting with high brightness SMD LEDs as light source with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings complete all as specified & directed.

Supply & fix, outdoor security light LED 36/40 watt luminaire IP 65/66 protection polyster powder coated with pressure die cast aluminium housing and robust construction with reflector cover pre anodised and flat white high transmission acrylic cover or toughened glass, natural white type with electronic driver, connector block etc with internally prewired fixed to building with and including 1.20M long bracket made out of 40mm dia light grade GI pipe bent to shape & providing clamps 2 Nos made out of 50 x 6 mm Flat iron/MS clamps & 12mm dia bolts, nuts & washers etc and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fix surface mounting type bulkhead 10 watt LED luminaire ENDURA RUGBY NEO IP 65 environmental friendly, altra modern energy saving , decorative oval comprising of high brightness LEDs, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Supply & fix NEW GENERATION POST TOP energy saving envirmental friendly long life 35 watt LED luminaire light fitting, IP 65 protection with reflector cover electronic driver, connector block etc with internally prewired fixed to brcket on gate with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed.

Taking down care fully sub main wiring / service connections of any size including batten/ conduit, and making good the disturbed surfaces of wall/ floor .

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 6.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 6.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Notes:- Finished sub main wiring with two runs of 6.0 sqmm cable & one run of 6.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

M&L for sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 4.0 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed.Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length. Notes:- Finished sub main wiring with two runs of 4.0 sqmm cable & one run of 4.0 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid one unit length.

Taking down distribution boards any size any type including Change over/ MCB TPN/SPN/SP etc and making good the disturbed surfaces.

Supply and fix MCB DB vertical type 4 way VTPN sheet metal enclosure 415 volts with 200 Amp fully insulated standard copper bus bar for each face & surrounded with neutral bars and two common neutral bar, two earth bar including cable ties for cable manegement suitable for housing MCCB TPN 415 Volts as incommer, IP-43, IK-09 as per IEC 61439-3 with metal doors all enclosed on standard steel sheet flush mouting type double door factory fabricated complete without MCB & MCCB but with enclosue blank plate complete all as specified and directed .

Supply and fix MCCB 4 pole 100 to 125 Amp Icu 16 Kilo Amp and Ics 100% of Icu with adjustable 70% to 100% and thermal magnetic release suitable for fixing in VTPN DB.

Supply and fix in replacement MCB DB sheet metal enclosure factory fabricated double door SPN 8 way with 100 amps rated copper bus bar 240 volts IP-43, IK-09 with metal doorscomplete all as specified and directed.

Supply and fixing in replacement MCB SPN 240V, 50 Hz, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity 32 Amp rating in the MCB DB complete with connection testing and commissioning complete all as specified & directed.

Supply & fix in replacement MCB SP, 40 Amps, 'C' Curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed.

Supply & fix in replacement MCB SP, 6 to 32 Amps, 'C' curve, 240 volts, 50Hz, 10kA IP-20 as per IS/IEC 60898-1 2002 ISI marked complete all as specified & directed. (for equipment & power circuit)

M & L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 Mtr above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) duly reinforced with 8 mm formed or twisted bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ Looose soil and deposited the surplus soil to a distance not exceeding 50 mtr away from starting point, all as per electrical plate no:3 of SSR part-1 .

M&L for electrically disconnecting and taking down existing ceiling/Exhaust fans from any hight or in any position from existing bldg and keeping in safe custody for reuse at site after necessary repare/ servicing & painting with one coat of synthetic enable paint and re hanging/ re-fixing in original position but including replacement of three cor flexible copper conductor cable from ceiling rose to fan connector block of soze 0.75 Sqmm and hanging fan clamps, nuts, bolts and rubber reel bush etc & testing for proper functioning complete all as directed at site by Engr-in- Charge

Supply & Laying,testing , in replacement cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 volt grade, with stranded aluminium conductor of size 25 Sqmm 4 core compele all as specified and as directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in soft/loose/ soil for taking out/laying CI/GI pipe line and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick layers complete all as specified and as directed by Engineer-in-Charge.

Removal of excavated material n.exc 50 mtr away and depositing where directed at a level n.exc 1.5 mtr above from starting point complete all as specified and as directed by Engineer-in-Charge.

Supplying and laying un-rainforced precast concrete cable cover LV type-I flat size 250 mm x 150 mm x 40 mm in trenches for protection of cable.

M&L for sand cushioning dry fine for cable cushioning below and above the cable complete all as directed at site by Engr- in-Charge.

Supply and fixing GI Pipe 40mm Light grade , for cable protection laid in trench under road or path or fixed on pole or wall with clamps with all fittings complete all as specified and as directed at site,.

M/S RISHI RAJ AGRAWAL

M/s Rahul Kumar Agrawal

M/s S. K. Construction Co.

Balaji Associates

MNR ASSOCIATES

RAJESH ENTERPRISES

VISHESH BUILDERS

M/S MRITUNJAI SHARMA

M/S KAMAKHYA CONTRACTORS

N.K. ENTERPRISES

M/s Kok Singh Sisodia