APPLICATION OF COLD EMULSION AND

Amount

Material and Labour for applying a coat of Cold Emulsion confirmng to IS 8887:2004 by spraying using mechanical sprayer / whiper/brooms @ 5 Kg/ 10 Sqm over bituminous surfaces including preparation of black top surface by brushing with wire brushes for removing cracked mud etc sweeping with mechanical means to remove the loose particles etc complete all as specified and directed by Engineer In Charge Make: M/s HINCOL Emulsion RS I /M/s GR Infra projects Ltd Rapid Setting Bitumen Emulsion RS I

Material and Labour for one coat of painting lines, dashes, arrows,letters etc on bituminous/ concrete surfaces exceeding 10 cm width, with approved water base paint of color white, Golden yellow, deep orange, PO red and black as per the requirement in the Air field including preparation of surfaces complete all as specified and directed. Make: APCOTRAK of Asian paints Coverage area of paint shall be 6 sqm /Lit by adding 10-15% of potable water

All as per item No 02 here in before but on surfaces not exceeding 10 cm width or girth using water base paint or synthetic enamel paint complete all as specified and directed by Engineer In Charge. Note: For Ser No 01 to 03 : Wearing of flourecent waist jacket is mandatory for all the workers while working in the Air field. The quoted rates shall be deemed to be included for the above provisions. Note 2: Precautions has to be taken to avoid spilling of paint over existing painted surfaces even after if emulsion spills over painted surfaces it has to be removed immediately to enable the proper subsequent coating of paint

chowdeshwariconstructionco

kcs builders