SPECIAL REPAIR OF BLDG NO CET (2-6) F SERVANT QTR WITH SANITARY ANNEX OF 536 ASC BN INCLUDING CERTAIN MINOR WORKS UNDER GE SAUGOR.

Amount

Dismantling, floor, hearth or wall tiling including CM (bedding but not backing), and rubbish off the premises complete all as specified and directed.

Demolition of PCC in ground floors & pavings n exc 15 cm thickness (unreinforced) complete all as specified and directed..

Dismantling of asbestos cement (corrugated ,semicorrugated etc) sheets including ridge in roof covering complete all as specified and directed

Dismantling of framed timber scantlings 40sq. cm and over in section, in any position complete all as specified and directed

Dismantling of wall ceiling board (fibre,pulp,insulation etc)or insulation board/slab/blankers,any thickness, including cover fillets complete all as specified and directed.

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M&L for brick work work with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for precast reinforced cement concrete 1:2:4, type B1 (using 20mm graded stone aggregates) set in CM(1:4) in landings, kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length bend to shape as required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Cutting chases, pinning in, in brick wall for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

M&L for mirror polished Machine cut kota stone slab flooring 18mm to 20mm thick laid over and including15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for Kota stone slab 12mm to15mm thick in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L for white glazed ceramic tiles of size 600mmx300mmx7mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick plaster in CM(1:4) complete all as specified and directed.

M&L for non skid ceramic tiles 7mm to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles laid over and including 15mm thick screed bed or beding layer in CM(1:6) complete all as specified and directed.

M&L for 16mm to18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed.

M&L rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of joints with bituminous compound complete all as specified and as directed

M&L for plain cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 10mm thick in CM 1:4 with WPC finished even and smooth without using extra cment including water proofing compound @ 2% by wt of cement complete all as specified and directed..

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for applying two coats of Acrylic Distemper , white or tinted on new wall surface including preparation of surface complete all as specified and directed..

S&F GI ( cold rolled) snap grid size of 600mm x 600mm frame work of 24mm x 38mm x 0.60mm, Tee Section ( bottom pre coated ) and 24mm x 24mm x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F white Non Asbestos designer ceiling cement boards 4 mm thick complete all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick , trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering /cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S&F pre-painted Galvalume Aluminium Zinc coating GI based modular steel ridge sheet 0.45 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws complete all as specified and directed.

S&F 125mm x 60mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1.2.4, type B-1 (using 20mm graded stone aggregates) complete and including PCC 1:3:6, type C-0 (using 12.5 mm graded stone aggregates) for filling in pressed steel frame,hold fasts, etc., complete all as specified and directed.

S&F 35mm thick second class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F second class hardwood factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) for doors complete all as specified and directed.

S&F steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.

S&F steel window with side hung shutters without glazing bars and fixed to steel frame complete all as specified and directed..

S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm prelam PVC sheet on back face complete all as specified and directed.

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Note:- Aluminium section thickness shall be 1.50 mm)

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section complete all as specified and directed..

S&F 100mm butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm complete all as specified and directed..

S&F mild steel pressed handles,150mm oval type, stove enamelled black complete all as specified and directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, length of bolt 300mm complete all as specified and directed.

S&F butt hinges of 100mm size, medium weight, cold rolled mild steel and fixed complete all as specified and directed..

S&F framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290, Gde E 165 complete all as specified and directed.

S&F in repairs 110mm bore PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall including mild steel clamps complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors complete all as specified and directed..

S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed.

S & F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed.

Taking down and refixing 15mm bore GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed..

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm bore GI tubing and connections complete all as specified and directed

Taking down and refixing 20mm bore GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed..

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm bore GI tubing and connections complete all as specified and directed

Cutting existing steel tubing for alterations or additions (Each cut measured) 15 /20 mm pipe complete all as specified and directed

S&F in repair chromium plated bib taps, cast copper alloy fency conceled type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F in repair vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including 'P' or 'S' trap complete all as specified and directed.

S&F in repairs vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe including flushing cistern, flush pipe & waste pipe complete all as specified and directed

S&F in repair PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend and etc. complete all as specified and directed.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as fixed in repair complete all as specified and directed

S&F in repair soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug complete all as specified and directed

S&F in repair PVC(SWR) vent cowl of 75mm dia complete all as specified and directed

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of1000 Ltrs Capacity including dismantling water tanks complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

S&F Steel work in tubular trusses/purlins/posts (of round/ rectangular/square hollow section) including angle cleats for joining with welding complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with bolted or welded attachment complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal / square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 10cm but not exc 15cm long dia of shank 16mm to 20mm complete all as specified and directed

S&F GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, in patches not exe 5 sqm each including taking down old and jointing new to old as required in walls, ceilings, stanchions, beams, etc., including all laps, cutting and waste complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed .

M&L for providing cement concrete 1:2:4, type B0 ( using 12.5 mm graded stone aggregates) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed

M&L for machine pressed precast concrete interlocking paver block coloured glossy finished, chemically treated any shape and size confirming to IS-15658-2006 size of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including 30mm to 50mm stone dust cushioning complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds, mitered /stopped ends complete all as specified and directed.

Surface excavation not exc 30cm deep & averaging 10 cm deep and getting out in soft/loose soil complete all as specified and directed..

Site clearance in soft/loose soil complete all as specified and directed..

Excavation in post holes (or similar holes ) each not exc. 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cum, watering and removing, surplus soil to distance not exc, 50 mtr and making good surfaces in soft/loose soil complete all as specified and directed..

M&L for PCC in foundations, filling and mass concrete type C2 (1:3:6) (using 40 mm graded stone aggregates) complete all as specified and directed..

M&L for PCC in embedding of chain link fencing, rounded or chamfered on edges type B1 (1:2:4) (using 20mm graded stone aggregates) including necessary formwork complete all as specified and directed..

S&F angle iron fencing posts including cutting tops to shape as directed, drilling holes, notching for wire ets; flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Supply only 10 mm dia mild steel plain round bar as in line wire for chain link fencing complete all as specified and directed..

Supply only chain link mild steel galvanized fencing any size or type complete all as specified and directed.

Fixing of chain link fencing including line wires any mesh size & type to any type of standards rail straining bolts ect. Including provision of binding wire complete all as specified and directed.

S&F mild steel screw bolts dia of neck 5 to 10 mm dia (machine made) with hexagonal or square heads at one end and screwed the other or screwed both nds, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc. 5 cm complete all as specified and directed.

M&L for applying two coat synthetic enamel paint over a coat of red oxide on steel surface not exc 10 cm inwidth or girth when un-connected with other painting or when painted in different tint complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed.

Excavating over areas, not exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled & rammed including watering complete all as specified and directed.

Removing excavated materials (soil) to a distance not exc. 150m and deposting where directed, at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L for hardcore of broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for PCC type C- 2, 1:3:6 (using 40mm graded stone aggregates) 100mm thickness in floor complete all as specified and directed.

M&L for providing reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) for foundation including rafts, footings, foundation beams, plinth beams and bases for columns complete all as specified and as directed.

M&L for providing reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in columns, pillars, piers, post and struts complete all as specified and as directed..

M&L for providing reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in beams/ lintels over 1.5m span complete all as specified and as directed.

M&L for providing reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc... complete all as specified and as directed.

M&L for mild steel "TMT" bars 5mm dia and over upto 10 mm dia and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and as directed.

M&L for form work to sides of columns getting rough finished surfaces of concrete complete all as specified and as directed..

M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Fair finished surfaces of concrete flat complete all as specified and as directed..

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and as directed.

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) as in ceiling complete all as specified and as directed..

M&L for two coat cement plaster, first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and as directed. (Note:-WPC shall be measured and paid seperately under respective item)

M&L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed. Make:- Asian ACE or equivalent make as specified in Appx 'C' of list of makes

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105mmx60mm including cutting holes and making good in P:C:C 1.2.4 type B-1 (using 20mm graded stone aggregates) complete all as specified and as directed

M&L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces of walls and applying two coat of synthetic distemper over a coat of interior primer including preparation of surfaces of walls complete all as specified and directed.

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm, side and top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor complete all as specified and directed

Taking down main switch, DB/change over/VTPN, MCCB AC box of any capacity complete all as specified and directed.

M&L for concealed point wiring for the following with 1.5 Sqmm PVC-FRLS insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed:-

One light, fan point controlled by one switch

One 5 Amp independent socket point controlled by one switch

One 3 pin, 5 Amp socket point with other switch on the same board

All as per Srl item No.111 here in before but for power point wiring using with 2.5 sqmm PVC-FR LS insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated, sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead -ditto-

S&F modular switch, one way, 6 Amp 230, 1 module complete all as specified and directed

S&F socket modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed

S&F switch modular, single pole, one way,16 Amp,1 module 230 Volt complete all as specified and directed

S&F socket modular 6/16 Amp, 2/3 pin combined, 2 module 230 Volt complete all as specified and directed

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F modular fan step regulator 120W, 2 module complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.12 above but SPN 63 Amps, 240 V

S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed

S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100 MCCB as incomer 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed

S&F MCCB 63 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed

M&L LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet or equivalent make as specified in Appx 'C' of list of makes

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600mmx600mmx6mm buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed

M&L for concealed sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store and refixing/hanging in only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan and fan hook /clamp complete all as specified and directed

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep mettalic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects all as specified and directed. Make - Havells Ventil Air-DS/Bajaj MAXX AIR/Crompton EXHD300-6-1.

S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories,Hot and cold pvc pipe, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make:- Racold(Andris-R)/ Havells cat part No GHWAMJSWH025/Bajaj(Calenta)

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 4 core complete all as specified and directed

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed.

M&L for sand cushioning in trenches for the cable complete all as specified and directed

Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete.

M&L for kiln burnt bricks sub class 'B' laid in trenches for cable protection complete all as specified and directed

S&F in replacement of GI Pipe light grade 50 mm dia ISI marked on pole on wall or laid in trenches including all fittings (nut, bolt, clamps & washers) complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- Cutting and chasing in stone masonary and making good to disturbed surfaces shall be included in the quoted rate .

S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm, 2 core complete all as specified and directed

Taking down exisitng unserviceable indoor type LT pane board and Supply, installing, testing and commissioning factory made and tested (including CPRI type test certificate) LT feeder piller box (kiosk) indoor type plateform mounted at Chittora Pump House suitable for 415V 3 Phase 4 wire 50 C/S AC supply system having busbar chamber with insulator, copper busbar 1500 Amps rating covered with colour coding PVC insulation, installed on porcelain insulators. The panel shall be dust and vermin proof IP-54 class protection and made out of 2 mm CRCA MS sheet and 50X50x6mm thick angle iron frame work, power coated finish over one coat of red oxide primer out side and two coat of red oxide primer inside front opening type with approns for cable entry with door shutter and locking arrangement. Internal wiring with PVC insulated stranded copper conductor FRLS cables IS- 694 marked of accurate sizes but not less than 4 Sqmm. The scope of work include the following:-

OUTGOING (i) MCCB 4 pole 400 Amps 36 KA breaking capacity with Adj thermal and adj magnetic setting - 01No. (ii) MCCB 4 pole 320 Amps 36 KA breaking capacity with Adj thermal and adj magnetic setting - 02 Nos. (iii) MCCB 4 pole 100 Amps 25 KA breaking capacity adj thermal and adjn magnetic setting- 01 Nos. (iv) MCB, TPN 63 Amps 10 KA - 01 No (v) MCB, SPN 40 Amps 10 KA - 02 Nos

Taking down the unserviceable existing indoor type LT panel board from Alfa pump House and Supplying,installing, testing and commissiong of self supporting totally enclosed mounted on base channel of factory made panel board CPRI approved panel builder factory fabricated made out MS sheet not less than 2.0 mm thick CRCA sheet, dust and vermin proof, hinged smoothly openable front and rear with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip (25x5 mm) connecting provision -02 Nos, ventilation louvers, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc panel board suitable for 3 phase 4 wire 415V, 50Hz with 200 Amps rated copper bus bar, general construction confirming to IS:8623 (Part I), including mounting on angle iron frame made using angle iron 50mmx50mmx6mm complete all as specified and as directed and shall be comprising the following :-

INCOMING (a) MCCB with micro processor, based trip 4P,415V 125 Amps 35KA - 1 No (b) Combined multifunctional Digital meter -3 Nos (c) LED pahse indication lamp for RYB - 9 Nos (d) Copper bus bar of 200 Amps rating 50x10 & 50 KA three phase and nutural, Panel accessories including panel designation lables, lugs, ferrules for metering/indication encls, (e) Including internal wiring with multi stradand copper FRLS cable for panel OUTGOING (a) MCCB with micro processor, based trip 4P,415V 63mps 35KA - 02 Nos (b) MCB SPN 40 Amps 2 Pole 16 KA - 02 Nos (c) Fully automatic star delta Starter 3 Ph,415 Volts, suitable for 15 HP - 02 No including accessories Make L&T/Havells conforming to IS -13947-4 Note: The rate quoated by tender also includes to fix the legs of the panel box in cement concrete M 15 (Nominal mix) using 20 mm mominal size graded crushed stone aggregate 30 cm below GL and the box will be kept nearly 45cm above GL including earth work and allied services complete. The legs of the box will be of 50cmx50cmx6mm of length 750 mm)

Taking down the unserviceable existing indoor type LT panel board from Outer line pump House and Supplying,installing, testing and commissiong of self supporting totally enclosed mounted on base channel of factory made panel board CPRI approved panel builder factory fabricated made out MS sheet not less than 2.0 mm thick CRCA sheet, dust and vermin proof, hinged smoothly openable front and rear with neoprene rubber gasket, epoxy powder coated including danger plate, earth strip (25x5 mm) connecting provision -02 Nos, ventilation louvers, bottom detachable gland plate complete with suitable size zinc chromium plated nuts, bolts and washers etc panel board suitable for 3 phase 4 wire 415V, 50Hz with 400 Amps rated copper bus bar, general construction confirming to IS:8623 (Part I), including mounting on angle iron frame made using angle iron 50mmx50mmx6mm complete all as specified and as directed and shall be comprising the following :-

INCOMING (a) MCCB with micro processor, based trip 4P,415V 250 Amps 35KA - 1 No (b) Combined multifunctional Digital meter -16 Nos (c) LED Phase indication lamp for RYB - 16 set (d). Copper bus bar of 400 Amps rating 50x10 & 50 KA three phase and nutural, Panel accessories including panel designation lables, lugs, ferrules for metering/indication encls, (e). Including internal wiring with multi stradand copper FRLS cable for panel OUTGOING (a) MCCB with micro processor, based trip 4P,415V 100 Amps 35KA - 04 Nos (b) MCCB with micro processor, based trip 4P,415V 63 Amps 35KA - 03 Nos (c) MCB SPN 32 Amps 2 Pole - 04 Nos (d) Fully automatic star delta Starter 3 Ph,415 Volts, suitable for 50 HP - 02 No including accessories Make L&T/Havells (e) Fully automatic star delta Starter 3 Ph,415 Volts, suitable for 30 HP - 02 No including accessories Make L&T/Havells (f). DOL Starter suitable for 10 HP Capacity Submersible pump set - 01 No (g). DOL Starter suitable for 7.5 HP Capacity Submersible pump set - 02 Nos Note: The rate quoated by tender also includes to fix the legs of the panel box in cement concrete M 15 (Nominal mix) using 20 mm nominal size graded crushed stone aggregate 30 cm below GL and the box will be kept nearly 45cm above GL including earth work and allied services complete. The legs of the box will be of 50cmx50cmx6mm of length 750 mm)

S&F Synthetic insulating mat of size 2m x 1m x 12 mm complete all as specified & directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to using galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

SAGAR MOTOR AND TRACTOR CO

maharaja construction and suppliers