GE/BAS-67/2023-24 Special repair to certain sentry post building No P203 and special repair to building No P84A and provn of urinal bathroom geysers and deep freezer at Janglote under GE Basoli

Amount

Excavation in trenches n exc 1.5 m wide and nexc 1.5 m in depth for foundation of pole/stay and laying of UG cable/GI pipe and getting out in any type of soil complete all as specified and directed.

M&L returning , filling and including spreading, levelling , watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5mtr above the starting point , complete all as specified and directed.

Surface excavation n. exc.30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each including iron mongery complete all as specified and directed..

Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed ..

Taking down steel window & ventilator with wire mesh/glazed shutter (Without taking of shutter from frame) area n exc 1.50Sqm each. complete all as specified and directed .

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed .

M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed .

M&L for providing cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed .

S&F 35mm thick IInd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a) to chowkat.complete all as specified and directed .

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

S&F 35 mm thick Factory made 2nd class Hard wood panelled shutter (two panel) with lock rail and panel with panel of 12 mm veneered particle board with comercial veneering on both faces. The sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) complete all as specified and directed.

S&F Factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed.

S&F Solid PVC door frame (single rebated) of size 60mmx30mm made out of solid PVC frame with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws all as specified and as shown on drawing complete all as specified and directed .

Demolition of Wooden boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets. complete all as specified and directed

M&L 2nd class softwood Plain fillets Exceeding 13 and not Exceeding 25 Sq cm square, rectangular or triangular in section, clean sawn, secured with nails or brads. complete all as specified and directed

M&L For Decorative laminate type 1 of surface finish, Thickness in 0.9mmcolour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

S&F For Veneered decorative 12mm plywood, grade 1 (with BWR resin) with decorative face veneers on both faces, fixed with screws to timber frame work, incl wooden lipping on External Faces complete all as specified and directed

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

S&F 4mm thick Figured glass and glazing with oil putty in square n exc 0.5 sqm in each pane. complete all as specified and directed.

S&F Galvanised MS wire cloth 0.46mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

S&F for 100 mm butt hinges, stainless steel with SS screw complete all as specified and directed .

S&F aluminium anodised barrel tower bolts 150 mm long of extruded section fixed with stainless steel screws ,ISI marked, complete all as specified and directed .

S&F aluminium anodised handles 150 mm long of extruded section for door fixed with stainless steel screws ,ISI marked, complete all as specified and directed .

S&F 300 mm long mild steel sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with including a minimum of 6 bolts nut four on bolts plate & two on staple plate of complete all as specified and directed .

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type dia not less than 16 mm) including fittings and fixtures ,ISI marked, complete all as specified and directed .

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L for preparation of old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed .

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering complete all as specified and directed .

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wal/Piegeon proofing etc, fixed with self tapping screws including Dismantling asbestos cement (corrugated, semi corrugated etc sheets in roof covering and complete all as specified and directed .

M&L steel window/ventilator factory made out of box type frame and shutter (double shutter, one for glazing another for flyproofing) made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings and grills, all as per drg No CEPZ/TD/27/13 Sh 1/4 to 4/4 all as complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed .

M&L for preparation of old steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed .

Dismantling timber scantlings unframed work, 40 sq. cm and over in section, in any position complete all as specified and directed .

Material and labour for plain cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs ,water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for preparation of roof top surfaces, providing and applying single component elastic cold applied polyurethene modified acrylic roofing system ,co elastic technology (CET) based on modified polyurethene and fully fibre reinforced , having Sun Reflectivity index (SR) of 106 on top of concrete roof surfaces. All cracks upto 3 mm at corner joints, channel and parapets should be treated with crack seal . Applying three coats including one coat of primer of Shali Urethne BTD/ Sikalastic 560/ smart care damp proof ultra having coverage @ min 0.75kg/m2 and dilution upto 10% and laying reinforced fibre net and applying two coats of of shaliurethene BTD/Sikalastic 560/smart care damp proof ultra @ total consupmtion 2 kg/sqm in two coats for maintaining minimum dry film thickness 1.5mm and elongation at break of free film of approx 350%.The materials shall be applied with brush or roller, complete in all respect as per the direction of Engineer-in-charge/Consultant (Note :6 Hrs interval between two coat will be mantain ) . All auxilary and accessories involved during applacation should be supplied by single manufacturer as a part of system. (i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE .

M&L for roof treatment with the following specification - Removing existing water proofing treatment and applying water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/sqm and providing 3mm thick APP modified water proofing membrane weighing not less than 3 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm, The overlap shall be minimum 100mm on transverse direction and 75 mm on longitudinal direction and sealing overlap by torch application and bonded and applying a coat of blown grade hot bitumen 85/25 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminous aluminium paint/ primer @ 0.10 Kg/sqm over RCC roof slab/ parapet after cleaning the surfaces by removing dust, dirt etc. as per manufacturer’s instructions including 15mm thick screed in CM 1:4 and all as specified and as directed. NOTE :- The work shall be executed at site by the authorised applicator of APP and as approved by the GE.

M&L for cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) of uniform thickness 50mm , top surface of plain concrete padding shall be finished even & fair w/o using extra cement complete all as specified and directed.

M&L for 15mm thick screed in CM 1:6 in at Roof Top Surfaces for smoothening surface of laying APP Membrane complete all as specified and directed .

S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates using FE 410-W (Gde-E-250) Quality A. complete all as specified and directed .

Taking down rainwater pipes/Waste Pipe (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed ..

S&F 110 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor complete all as specified and directed ..

S&F 75 mm bore PVC (SWR) Pipes single socketed in any length with rubber ring joints , fixed to wall/floor complete all as specified and directed .

S&F PVC (SWR) Bends in any radius 110 mm bore with access door complete all as specified and directed ..

S&F PVC (SWR) Bends in any radius 75 mm bore with access door complete all as specified and directed ..

S&F for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement.complete all as specified and directed

S&F for 125/110mm dia PVC (SWR) gully trap with grating including jointing with solvent cement.complete all as specified and directed

S&F PVC (SWR) 110 mm bore junction single (single'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) 75 mm bore junction single (single'T') equal or unequal with access door complete all as specified and directed.

S&F PVC (SWR) Vent cowl 75 mm bore in repair..complete all as specified and directed.

S&F PVC reducer 110 mm complete all as specified and directed.

S&F in repairs for 75mm bore PVC (SWR) P trap including jointing with solvent cement.complete all as specified and directed

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 3 layer white colour water tank , non- toxic effect, algea formation protection (made from Virgin grade of polyetylene material which is duly stablized with anti-oxidentPlastic) of capacity 500 litres, (cylindrical vertical one piece moulded with closed top), the internal and external surfaces of tanks are smooth, clean and free from any hidden internal defects, hoisted and fixed in position including S & F necessary GI fittings, inlet/outlet washout, overflow pieces long nipples, checknuts & washer ,20 mm dia PTMT valves high pressure of PTMT with epoxy coated Aluminum rod & high-density plastic ball and 20 mm brass stop cock etc complete all as specified and directed.

S&F 15mm bore chromium plated cast copper alloy bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule all complete all as specified and directed.

S&F Brass Float Ball valves, high pressure aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms) complete all as specified and directed.

S&F Bathroom Cabinet with mirror plastic strong and heavy rich look 6 selves storage organiser of size 450 x 300 mm complete all as specified and directed .

S & F sink Double Bowl made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F vitreous China wash down water closet pan (Pedestal pattern), white (EWC) with ‘P’ or ‘S’ trap, including connection to drain or outgoing pipe and including with 10 ltr capacity PVC flushing cistern, including brackets for flush tank, PVC connection 450mm long and 15mm dia to flushing cistern/ sanitary fittings with PTMT nuts of length 450mm and all necessary fittings, inlet, outlet pipe connections, and plastic water closet seat cover, closed pattern with recessed bottom cover and mild steel chromium plated hinge and CP jet spray complete all as specified and directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for wash hand basin / sink complete all as specified and directed.

S&F Vitreous china wash basin white , flat back size 550 X 400 mm including brackets including cutting for and pinning in ends of brackets or erecting stand including PTMT 32mm waste coupling and waste pipe, complete all as specified and directed .

S&F in repair water closet (Squat pattern) without lime concrete bedding, vitreous china long pan orissa pattern 580x440mm, white with integral foot rests including 10 ltrs capacity flushing cistern with PVC Connection & flush pipe, including connectoin to trap, and to flushing pipe, antisyphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in Vitreous china bowl urinal Half stall type (white) minimum with grating and union for discharge pipe including CP spreader of any colour for fixing with 15mm dia pipe and Incl waste pipe.complete all as specified and directed.

S&F vitreous china urinal partition white of size 310 x 700mm complete all as specified and directed.

S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete complete all as specified and directed

S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete complete all as specified and directed

S&F of 25mm dia bore steel water GI tubes medium grade with all fittings and fixed cocealed to walls, ceilings or laid in floors complete complete all as specified and directed

Supply & fixing 15mm bore tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary chiesling and cutting in brick/concrete surfaces and making good the disturbed surface in CM 1:4. with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed.

Supply & fixing 20mm bore tubing with screwed socket joints, medium grade galvanized steel with all necessary tube fittings and fixing complete with clips, wall hooks etc to wall and ceilings or laid in floor including necessary chiesling and cutting in brick/concrete surfaces and making good the disturbed surface in CM 1:4. with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed

Refixing of 15mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed

Refixing of 20mm dia bore steel water GI tubes medium grade with all new fittings and fixed cocealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed.

S&F in repair curtain rod aluminium alloy tubular with fixing brackets, stop etc. complete all as specified and as directed.

Demolition cement concrete unreinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed .

Demolition of reinforced cement concrete of any description. complete all as specified and directed .

M&L for Spreading soil and levelling in layers n exc. 25 cm thick and watering and well ramming under floor incl soil complete all as specified and directed.

M&L for Hard core of gauge n exc. 63mm depositing, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface. complete all as specified and directed .

M&L for 75 mm thick PCC type C-2, 1:3:6 (40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

M&L for 10mm thick rendering/screeding on fair faces of brick / concrete surfaces in cement mortar 1:4 and finished even and fair for receiving tiles complete all as specified and directed .

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M&L Coloured Chequered cement concrete tiles 30 cm x 30 cm x 20-25 mm thick set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

M&L for Premium Quality Durastone / Endura heavy duty vitrified tiles of size 300 mm x 300 mm x 10mm to 12mm thick as in floors and skirting set and jointed in neat cement slurry and pointed in white cement to match the surface complete over screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed .

M&L Glazed ceramic tiles in vertical surface 300x6000mmx7mm/ 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed.

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed ..

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed ..

M&L Machine cut kota slab flooring 18-20mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes complete all as specified and directed ..

M&L Machine cut kota slab as in skirting/dado etc 16-18mm thickness over cement screed base laid and jointed with gray cement slurry mixed with pigment to matches the shade of the slab including rubbing and polishing,and 10mm thick rendering in cm 1:4 for complete all as specified and directed ..

M&L for rubbing/griding and polishing of Machine cut kota stone slab or skirting ,steps, flooring 20-25mm thick complete all as specified and directed .

M&L for Granite black colour of any type 18-20mm thick machine cut as in cooking plateforms and like in cement mortar ( 1:4 ) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes. complete all as specified and directed.

Rounding/moulding to edges of stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooding platform , and other similar situations etc. complete all as specified and directed

M&L for Coloured Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade including 50 mm thick sand cushioning complete all as specified and directed

Demolition of brick work or stone masonary work built in cement and sand mortar including all quions and pillars complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 complete all as specified and directed

M&L Brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4. complete all as specified and directed

M&L for Preparation of new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed .

M&L for Preparation of old plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less then 50 gm/litre and UV resistence as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed

S&F chromium plated D type 600mm long tubular towel rail complete all as specified and directed

S&F Stainless steel high grade material double soap dish complete all as specified and directed

S&F Fancy type health faucet with 8mm dia 1mtr long flexible tube (back flow preventer), chromium plated of 15mm bore, complete all as specified and directed.

S&F Fancy toilet paper holder, brass, chromium plated , complete all as specified and directed.

S&F 15mm Brass CP center hole basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed .

S&F Mild steel peg set of 4 of hook size 50 to 60mm , complete all as specified and directed.

S&F stop valve cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe. complete all as specified and directed .

S&F in repair chromium plated shower roses with or without swivel joints 125mm size including fixing to steel pipe or union complete all as specified and directed

M&L for concrete bed to drain pipes laid in trenches incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone aggregates) for 150mm bore of pipe complete all as specified and directed

M&L for Reinforced concrete pipes150mm, class NP3, laid and jointed complete with collars bed complete incl testing all as specified (Concrete to be measured and paid for separately).complete all as specified and directed

M&L Cement concrete M-7.5 (Nominal mix),type D-2, 1:4:8, (using 40 mm graded crushed stone aggregates) in foundation filling and mass concrete, post holes etc complete all as specified and directed

M & L Brick work curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole, septic tank and external pointed flush in same mortar as the work proceeds complete all as specified and directed

Taking down cement plaster on brick or stone walls or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with, water etc. complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement mixed with liquid ater proofing compound @ 3% of cement weight complete all as specified and directed

M&L for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or conrete surfaces finishing the surface even and smooth without using extra cement complete all as specified and directed

M & L Precast cement concrete type B-1, 1:2:4 (20mm graded) aggregate as in manhole cover including necessary form work as required complete all as specified and directed

M & L Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required. complete all as specified and directed

M&L for construction of Septic tanks for 10 users, in any type of soil, foundation In PCC 1:2:4, brick work in CM 1:4, RCC Slab covers including RCC precast manhole cover having 6mm plate embedded all around / fibre reinforced cover with angle iron frame Vent shaft and sludge chambers etc. complete all as specified and as shown on drawing CEPZ/TD/013/13 Sht 1/5 to 5/5 .

M&L for construction of soakage wells of size 1.2m dia x 3.0m deep, in any type of soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete all as specified and as shown on drawing CEPZ/TD/013/13 Sht 1/5 to 5/5 .

M&L 75 mm thick PCC, type C-2, 1:3:6, ( using 40mm graded crushed stone aggregate) as in plinth protection finishing the surface even and smooth without nusing extra cement. complete all as specified and directed

M&L Preparation of old plastered surfaces and applying two coats of distemper oil emulsion on plastered surfaces. complete all as specified and directed

M&L For Preparing Old plastered surfaces and Applying two coat of cement based paint on walls. complete all as specified and directed

M&L For Preparing new plastered surfaces and Applying two coat of cement based paint on walls. complete all as specified and directed

M&L Preparation of new plastered surfaces and applying two coats of distemper oil emulsion with 3mm thick wall care putty on plastered surfaces. complete all as specified and directed

M&L for rendering 5 mm thick in CM (1:3) finished surface even and smooth w/o using extra cement in ceiling. . complete all as specified and directed

M&L for preperation of new plastered surface and. and applying three coats of white wash on ceiling. complete all as specified and directed

M&L for preperation of old plastered surface and. and applying three coats of white wash on ceiling. complete all as specified and directed

Supply only integral Water Proofing Compound. complete all as specified and directed

M&L Terra kota tiling 10mm thick set and jointed with grey cement with pigment and pointed with neat cement slurry in chajjas over 15mm thick screed bed in CM 1:4 over PCC coping 1:3:6 type C-1 (using 20mm graded agg). complete all as specified and directed

Taking down ,dismantling of broken/loose portion of chajja ,facia upto 450 mm wide and making good the surfaces with cement mortar 1:3 or PCC 1:1.5:3 including necessary formwork /scffolding and matching with existing surface of facia (including white wash /colour wash or cement base paint )chajja upto 2nd floor .Complete all as specified and directed .

M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in slabs, supported on walls, beam and columns in floors, and in shelves and the like. complete all as specified and directed

M&L Reinforced cement concrete M-25 (Design mx) using 20mm graded crushed stone aggregates as in beams ,chhaja,cantilevers, bressummers, lintels over 1.5 mtr span. complete all as specified and directed

Steel Form work to soffits of suspended slabs such as roof slabs, floor slabs etc not exceeding 200mm thick. complete all as specified and directed

Steel Formwork to sides of raft and raft beams,sides and sofits of plinth beams, Roof beam; and similar works; vertical or to batter for rough finished flat surfaces. complete all as specified and directed

M&L TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

-ditto- here-in-before but 8mm dia and over upto and including 10mm dia as in stirrups, spacers, binders complete all as specified and directed.

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core complete all as specified and directed..

Supply,laying and testing cable XLPE insulated,screened,PVC bedded galvanised steel strip or wire armoured,electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 2 core complete all as specified and directed..

Supply and fix for DWC high density polythylene pipes having dia 63/50 as per site requirement having corrugation on the wall and plain surface on the wall conforming to IS : 14930 (Part-I & II) for protection of underground cable laid along pole/along wall/in PCC on GL/roof and including all fitting as required complete all as specified and directed.

Supply & Fixing 20mm bore dia of tubing , medium grade galvanized steel with all necessary tube fittings and fixing complete with tee bend elbow union socket clips, wall hooks etc to wall and ceilings or laid in floor complete all as specified and directed.

M&L cutting and screwing existing steel tubing for alteration/additions in position without taking down including insertion of Tee complete all as specified and directed..

Suppy and fix gate valve 20mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

Suppy and fix gate valve 25mm dia gun metal gate valve conforming to IS with iron wheel head screwed both ends for iron pipe complete all as specified and directed..

Taking down copper/aluminum point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as per specified and directed.

Point wiring with 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable in and incl rigid PVC conduit concealed medium grade with pressed mild steel terminal boxes(sheet not less than 1.6 mm thick) duly painted with a coat of red oxide primer with suitable thickness plastic laminated sheet cover 3mm thick of adequate size for one light or one fan controlled by one switch incl 1.5 Sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable as earth wire(green colour) to common earth dolly complete all as specified and directed by Engr-in-charge.Note: a) Rate for cutting chases for conduits and sinking for boxes and making good to wall, floors deemed to be included in each point etc (b) On RCC roof ceiling PVC conduit shall be provided on surfaces for any necessary point with proper fixing clips and no extra cost shall be paid for the job etc complete all as per specified and directed.

All as per item No 145 but for one 3 pin 5 Amp socket outlet on independent board complete all as per specified and directed.

All as per item No 145 but for one 3 pin 5 Amp socket outlet on same board complete all as per specified and directed.

Point wiring with 2.5 sqmm FRLS, PVC insulated and unsheathed multi stranded flexible copper conductor cable drawn in and including rigid PVC concealed conduit medium grade of suitable size with sunk cast iron/pressed steel terminal boxes(sheet not less than 1.6mm thick) of adequate size with suitable thickness plastic laminated sheet cover 3mm thick for one 3 pin socket outlet 15 Amp on independent board including continuous 2.5 sqmm FRLS,PVC insulated and unsheathed copper conductor cable (multistranded) as earth wire to common earth dolly, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 5 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing switch piano flush button single pole one way 15 amps 230 volts, complete all as per specified and directed.

Supplying & Fixing fan regulator electronic flush type stepped (rotary type) with 5 steps speed control complete all as per specified and directed.

Supplying & Fixing socket out let, 5 pin, 5 amps, 230 volts, complete all as per specified and directed.

Supplying & Fixing socket out let, 6 pin, 5 and 15 amps multi purpose 2 in 1 flush type, 230 volts, complete all as per specified and directed.

Supplying & Fixing switch socket combination, 2 in 1 , 5 pin, 5 amps, 230 volts,flush type complete all as per specified and directed.

Supplying & Fixing switch socket combination, 2 in 1 , 6 pin, 5 and 15 amps, 230 volts,flush type complete all as per specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate having matching colour to holder suitable for angle/batten fittings complete all as per specified and directed.

S&F ceiling rose surface bake lite two to three terminal isolated body fixed on PVC round block complete all as per specified and directed.

Supply and fix LED lamp 9 watt , complete all as specified and directed.

S&F Wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 20 Watt LED fitting with 100 lumen/watt 6000k, 230Volts, diffused optics etc complete with all accessories, connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, fixed on two PVC round block and testing complete all as per specified and directed.

S&F in replacement LED tube light fitting 1x20w,230v, including LED tube rod with polycarbonate diffuser,4 feet batten type fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as per specified and directed.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with three core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as per specified and directed.

S&F 25Watt LED Bldg security light fitting of IP-66 protection, pressure die cast aluminum housing with epoxy powder coated finish having polycarbonate cover with all accessories pre-wired with and including medium grade GI pipe 40mm dia for bracket for fixing on pole/wall connecting with three core conductor cable of size 1.00 sqmm complete all as per specified and directed.

S&F MCB SPN 32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCB SPN 25 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCB SP 6-32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

S&F MCB isolator 6 to 32 Amps with 10KA breaking capacity of c series in distribution board complete all as per specified and directed.

Supply and Fix steel body Exhaust Fan 230 volts 200 mm sweep copper wound 50 Hz, with louvers complete all as specified and directed

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 08 way. fitted with copper bus bar rated 100amps, neutral link , earth bar complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 04 way. fitted with copper bus bar rated 100amps, neutral link , earth bar complete all as per specified and directed.

S&F in replacement sheet metal powder enclosure powder coated versatile double door single pole and neutral (SPN) distribution board for MCB provisions 230Volt, 50Hz AC supply for 02 way. fitted with copper bus bar rated 100amps, neutral link , earth bar complete all as per specified and directed.

S&F in Replacement of existing sub main wiring with two run of single core (FRLS) PVC insulated and unsheathed cable with copper conductor (Multi strand) having nominal area 4.0 Sqmm drawing into and including PVC non metallic rigid conduit of adequate size and making electric connections including one run (FRLS) PVC insulated single core copper conductor cable 4.0 Sqmm as a earth continuity conductor(green colour) in and including in non metallic rigid PVC conduit, including cutting chases in brick wall, replastering and making good to match the existing specifications complete all as per specified and directed. Note :- (i) Rates are deemed to be included chases of conduit and sinking for boxes cutting and making holes in wall/floor for passing in or through conduit (ii) Two run of 4.00 sqmm single core (FRLS) PVC insulated copper conductor cable one run of 4.0 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of suitable size will be measured as a one unit.

S&F Deep freezer hard top, double door type of capacity 320 litres, electric driven 220/240 volt 50 HZ complete all as specified and directed.

S&F voltage stabilizer for automaticoperation, single phase, naturally air cooled, indoor type designed for input variation between 170 to 250 volts with output voltage stabilized at 230 volts with accuracy of + 2.5% and of capacity of 1KVAcomplete all as specified and directed.

Supply ,fixing and testing horizontal water type heater storage type with multifunctional safety valve,electric operated 230 V,single phase complete including one no of heating element 2 KW,automatic thermal cut out,flusible plug,anti vacum ,built in presser release valve,thermostat,rust proof powder coated body,indicator lamps and all safety advices as per IS capacity 25 litres, 5 star rating including suitable and making good disturbed surface complete all as specified and directed

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5 of SSR Part-I (2009) including filling of charcoal dust , common salt all around Earth plate upto 150mm, 20mm bore GI medium grade watering pipe, 15 mm bore light grade earth lead protection pipe upto main board, funnel with wiremesh, 40mm thick RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate reinforced with suitable handle and angle iron frame and necessary excavation and earth work in any type of soil etc. complete all as specified and as directed including testing on completion. (Note: The rate quoted include cost of min 7.5 metre earthling wire.)

KHOSLA ENGINEERS BUILDERS

G.M. ENGINEERING SERVICES

Amrik Construction co

Ms International Engineers

M/S NEERAJ ENTERPRISES