Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance PLOT NUMBER 286 INDUSTRIAL AREA PHASE 2 CHANDIGARH | CHANDIGARH | CHANDIGARH | CHANDIGARH | Admitted-Finance |
| 3 | Admitted-Finance ROMA BANJARA TANDA CHS BUILDING NO 1 ROOM NO 506 MANKHURD W MUMBAI 400 043 | MUMBAI | MUMBAI | MAHARASHTRA | 400043 | Admitted-Finance |
Tender Value
₹57.1 L
EMD Value
₹1.1 L
Closing Date
12 Jan 2024, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Chairman GB
3rd floor VS Bhavan Mumbai
Building work/ Building maintenance work/ Building renovation work
2023_DCSEM_787972_1
DCSEM/CQD/QSB/23-24/NIT/94 dt. 29.12.2023
Open Tender
Civil Works
Item Rate
183 days
Anushaktinagar, Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹0
₹1.1 L
1 Feb 2024
29 Dec 2023
16 Jan 2024
29 Dec 2023
12 Jan 2024
29 Dec 2023
29 Dec 2023 - 3 Jan 2024
Amount
ABSTRACT SHEET
PART - A CIVIL WORK
PART- B : P H WORK
PART-C - ELECTRICAL WORK:
Description of Work / Item(s)
Amount
PART - A Civil Works
Assisting department technician in Day to day maintenance work in residential flats under TTM-I,II & WS maintenance units, as per clause no. 1 of specifications of Maintenance contract. Note: 1) Supply of new aluminium/brass/PH fittings/fixtures required to replace existing damaged/non repairable/non-functioning fittings shall be paid under relevant item separately. 2) Following minimum labour strength shall be provided on regular visit. (i) PH Works- Plumber-2 No & Helper - 2 No (ii) Carpentry works - Carpenter - 2 No & Helper- 2 No . The Each pair shall report to TTM-I & II maint. unit respectively. 3) Regular check up of PH / Carpentry installations in each flat of Parasnath bldg, Jayantia Bldg and other residential bldg under TTM-I &II maintenance unit shall be carried out for working day of 8 hours.
Assisting department technician in Day to day maintenance work in residential flats under TTM-I&II maintenance units, Carpentar 1 No & Helper- 1 No for Carpentary works for checking, repairing, refixing/ replacing woods/ aluminium/brass fittings & fixtures, etc. and whatever required including Saturday.
Assisting department technician in Day to day maintenance work in residential flats under TTM-I&II maintenance units,Plumber 1 No & Helper- 1 No for Plumbing works for checking, repairing, refixing/ replacing of PH fittings & fixtures whenever and whatever required including Saturday.
Providing and fixing of machine cut and both side polished minimum 35 mm thick Cuddapah stone for shelves of cup board including removing of old damaged wooden shelves and making Nitches all the three sides of cup board very carefully and fixing cuddapah with cement mortar and re-instaling the surrounding as per existing including disposal of debries within colony all as directed by Engineer-in-Charge.
Providing & fixing ordinary plain/ frosted/ Bajara sheet glass of approved make of following thickness in various sizes as required at site, fixing to windows / louvers, partitions, vision panels, doors etc. using first class oil puttyof approved quality and make including supplying & fixing glazing pins, teak wood or aluminium beading with necessary screws, nails etc. at all floors & locations including cutting the glass to required size, removing the existing broken/ damaged glass panes from windows/ doors/ partitions etc.along with its old oil putty, beading etc. and disposing off the un-serviceable material out side colony including wastage in cutting, transportation etc. complete all as directed by the Engineer-in-charge.
c) 5 mm thick plain glass with EPDM gasket for aluminium windows
Supplying, fabricating and fixing in position at all floors factory made Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators with rivit joint of specified size, made of integrated bronze anodised matt finished (15micron thick) aluminium section (extruded) , including for making exhaust fan frame work, handles of specified size etc, of approved manufacutres for following types with extruded sections of Jindal / Indal / Aluminax or other approved equivalent make of approved sections with size and wights as directed for frames and shutters(including wastages if any) confirming to relevant IS specifications with all approved Bronze anodised aluminium fittings and accessories, latching fixture, 2/3 rollers with ball bearing of superior quality all as shown in the drawing including providing and fixing aluminium channel beading/glazing clips fixed with necessary bronze anodised screws, grouting the gap with sealant and including dismantling of existing window frame and shutter, glass and depositing same to dept store etc all complete generally as per drawing, specifications etc, all as directed by EIC.
Providing and fixing Night latch Full set with 7 levers, consist of latch assembly, safty latch, Round lock, Retainer plate, Dead lock suitable for doors of 35-40 mm thick, with 3 keys in orginal, inside opening door with safety like brass lever locking mechanism screws required, similar to M/s. Godrej make ( Cat No. 8261) or approved equivalent having same shape, size and dimensions including removing the existing old & damaged lock and submitting the same to the deptt. store etc. complete all as directed by the Engineer-in-charge
Providing & fixing Mortice lock with brass parts and body with 6 levers,of Godrej/ Everite make or other approved equivalent with stainless steel duplicate keys and pair of detachable, pressure diecast chromium plated handle with chromium plated brass screws for left hand/right hand and for single leaf shutter of 30mm to 50 mm thickness with brass socket plate. (Exact number for left, right and double shutter shall be ascertained based on site requirement.) etc. complete as per manufacturer specification and as directed by EIC
a) Godrej make model no. 7117 or equivalent with SS handle on both sides of shutter.
Providing and fixing Godrej or other equivalent multipurpose lock for doors of shelves/nitches/cupboards/cabinets with stainless steel duplicate keys including removing old non functioning existing lock and depositing to deptt. Stores, etc complete all as per specification and as directed by the E-I-Charge.
Pressure grouting through RCC slab / brick masonry by drilling hole in RCC slab to required depth without causing any damaged to reinforcement, inserting ½” dia PVC pipe in hole securing the hole sides with mortar 1:2, pressure grouting with cement slurry mixed with approved water proofing compound @ 2% by weight of cement to required pressure, continuing the pressure grouting till the flow of cement slurry stops, removing the PVC pipe, sealing the hole with cement mortar 1:1, scaffolding etc. complete all as directed by the Engineer – in – Charge.
Providing and laying at all floors and levels Vitrified tiles of first quality Marbonite of M/S H&R JHONSON (INDIA) Ltd or other equivalent approved make of approved colour, shade, pattern and of thickness as per manufacture's specifications, laid directly over tile, using polymer cum cement based adhesive (Type -II as per IS) manufactured by M/S Roffe construction or M/s Bal Endura chemicals or other approved equivalent in respect of flooring and fixed over 12 mm thick backing using ready mix cement mortar 1:3 in respect of skirting , close jointed and grouted white /colour cement slurry with pigments to match the colour of the tiles, finished to level, line, slope and plumb including cutting of tiles, making openings / cut out where necessary including wastage for odd shape of room and final cleaning of surfaces as required, curing etc. complete all as per specification,relevent IS code & as directed by the EIC.
a) In flooring with tiles of approx. size 600 mm x 600 mm similar to Salt & Pepper (White/Grey)/ Rigato/Athelon of M/s H& R Johnson (I) ltd. Or similar tile of other approved make & fixed the tile polymer cum cement based adhesive. including dismantling the existing dado/skirting tile and backing cement mortar disposal of debris etc. complete.
b) In Dado / skirting with tiles of size 600 x 100 mm similar to Salt & Pepper (White/Grey)/ Rigato/Athelon of M/s H& R Johnson (I) ltd. Or similar laid over 12 mm thick ready mix cement mortar 1:3 backing, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting etc. complete, including dismantling the existing dado/skirting tile and backing cement mortar disposal of debris etc. complete.
Providing & laying at all floors & levels first quality matt finished/non slippery ceramic tiles of minimum thickness as specified by the manufacturer of M/S. H&R JHONSON (INDIA) Ltd. or euqivalent approved make of approved colors, shade and texture in flooring / dado / skirting as per approved pattern. incluidng cost of all materials, including of cutting the tiles to required shape, wastage, pointing the joints with white cement mixed with matching pigments to match the colour of the tiles, finished to line, level, slope & plumb, final cleaning of surface as required, curing , making necessary opening cutouts etc. and including removing existing flooring / dado and disposing of debris complete all as per specifications, relevent IS code & as directed by the Engineer-in-Charge.
a) In flooring with tiles of size 300 x 300 ( approx size ) similar to white / ivory / other approved colour quartze series of M/s H& R Johnson or euqivalent approved make with 20 mm thick 1:4 ready mix Cement mortar bedding.
b) In dado / Skirting with tiles of 300X450mm( approx size) similar to combination of Infinity aqua/red/beach and infinity white of Higlihter series of M/s H&R johnson (India) Limited) fixed over 12 mm thick using 1:4 ready mix cement mortar backing/fixed directly over existing tile with polymer cum cement based adhesive(Type-II) manufactured by roffe construction or M/S Bal Endura chemicals or other approved equivalent, jointed with cement slurry & grouted with pigment of matching shade & finishing the top of skirting/dado etc. complete.
Repairing of loose / shaky vitrified tile flooring/ green marble/granite stone frames at all floors and levels using polymer modified cement based tile adhesive manufactured by Roffe Construction – NSA (Non Skid Adhesive) or M/s Bal Endura Chemicals– Gold Star or other approved equivalent. The repairing process will consists of following. (1) Complete checking by tapping of affected flooring area using solid wooden stick. Identifying the affected tiles for repair work. (2) Drilling holes through tiles and widenining of tile joints using cutter as per requirement. (3) Breaking of tiles and removing backing adhesive from original flooring, cleaning etc (If Required). Checking the original flooring by tapping using solid wooden stick and repairing of original flooring by breaking the original mosaic / cement tile flooring and filling with 1:3 cement sand mortar, curing etc complete. (4) Grouting the tile flooring using tile adhesive slurry through drilled holes, widened joints, opening made by tile breaking using trowel etc and by tapping of floor tiles etc. (5) Sealing of drilled holes, widened joints using white cement cleaning of flooring, removal of debris and disposal of debris outside colony. (6). Removing and refixing of Aluminium window/door shutter/MS grill for repairing work. After the repairing works (7) Complete checking by tapping of repaired flooring area using solid wooden stick after 7 days of repairing work in presence of departmental representative. The repaired work shall not make any hollow sound, loose/shaky motion of tiles. The entire repairing work shall be carried out as per direction and instrcutions of engineer-in-charge.
(a) Removing loose / shaky vitrified floor tiles and refixing the same using polymer modified cement based tile adhesive manufactured by Roffe Construction – NSA (Non Skid Adhesive) or M/s Bal Endura Chemicals– Gold star, including removal of loose/shaky tiles cleaning back side of tile and removal of tile adhesive from existing floor area, cleaning etc complete all as per specifications and as directed by the Engineer-In-Charge.
b) Replacement of damaged marble stone with 18 mm thick machine cut and single side machine polished Baroda green marble stone for window cill/ door frames in stepped form laid over 20 mm thick 1:4 ready mix cement mortar & over lapping of 20 mm shall be fixed with Araldite adhesive with best workmanship including half round moulding & polishing of exposed face etc.providing 75mm long SS screw minimum @600mm c/c complete. all as per drawing, specifications and as directed by the Engineer- in- Charge.
c) Replacement of damaged marble stone with 18 mm thick machine cut and single side machine polished Baroda green marble stone for window jamb & bottom of lintel and door cill in single piece laid over 20 mm thick 1:4 ready mix cement mortar including half round moulding & polishing of exposed face etc.providing 75mm long SS screw minimum @600mm c/c complete all as per drg, specifications and as directed by the Engineer- in- Charge.
Providing & applying asian paint smartcare Damp block white colored coating over wall / concrete surface including cost of removing existing old paint with putty etc., applying one coat of self priming coat of AP smart care damp block (diluted with water in 1:1 ratio) and applying two coats of AP smart care damp block (diluted with water in 3:1 ratio) etc. complete as per specification & as directed by the EIC
Supplying and fixing in position at all floors and location stainless steel 304 grade mosquito net made out of 24 guage ,16meshshutters including exaust fan frames etc. ofvarious size and shape fixing with stainlesssteel nuts and bolts to suit the aluminiumframe ( aluminium frame , beading etc. shallbe paid under relevant item) including labour wastage scaffolding etc. all complete as per specification,drawings & as directed by EIC
Labour Charges for cleaning, brooming, washing/mopping the vacant flats including disposing of waste materials including cost of cleaning materials like brooms, detergents/disinfectants etc complete all as directed by the Engineer-in- Charge.
b) Type IV D & Above flats
Labour charges for Removing, dismantling, fabrication & refixing exisiting Aluminium sliding/top hung/fixed/ adjustable louvered windows & ventilators/doors with rivet joint/solid door shutters/MS grill/Cupboard shutter with selves & frames of specified size for repair,refixing & maintenance works such as replacement of rollers, marble cills, jams, EPDM Gasket,wooden shutters,cupboard shuter with selves all complete generally as per specifications , all as directed by EIC. (Rollers, gasket, friction hinges, marble stone, floor springs, hinges etc shall be paid under relevent item.)
Removing & refixing exisiting door shutters in original condition after completion of repairing works of frames including all labours and all the fittings and fixtures etc. complete all as per specifiction and as directed by EIC
Providing, fixing 1 mm thick of approved qulity and shade Laminate of Forminca/Greenlam/Meriono etc. for Kitchen Cabinate/shelves inclusind all fixing accessories, screws, nail, adhesive, labours, scaffolding including all tools and equipments etc complete as per specficitiona, drawings and as directed by EIC
Supplying following fittings & fixtures at maintenance unit stores as directed by the EIC.
Heavy duty SS butt hinges of size 125mm X 76mm X 2.8 mm of M/s Shalimar Hardware (ISI Marked)
Heavy quality magic eye / door viewer of brass body, having minimum 180 degree wide angle lens suitable for flush door of thickness 35mm to 50 mm, total length closed condition 40 mm, outside dia 25 mm, mounting diameter 14 mm having full thread for length adjustment
ISI marked aluminium Bow Handle 100 mm. long with back plate, ' D ' section.
ISI marked aluminiumTower bolt 200 mm long
ISI marked aluminiumTower bolt 150 mm long
ISI marked aluminiumTower bolt 100 mm long
ISI marked aluminiumTower bolt 75 mm long
Superior Quality Aluminium door stopper Floor type with heavy quality rubber bush fixed with screw, complete set. The weight of aluminium door stopper without rubber bush and screw shall not be less than 25 gms each.
SS Aldrop(SS-304) 250 mm long , 16 mm dia Barrel. with extra locking arrangement of M/s Shalimar (ISI marked)
Heavy duty 100 mm long sliding window zinc body lock with nylon hook and bracket, (Star lock or approved equivalent)
Superior quality heavy duty approved make PVC rollars with ball bearing.
Supply of OPC/ PPC -ISI marked , cement of 50 Kg bag of approved make.
Supply of White cement -ISI marked , cement of 1 Kg bag of approved make.
Supply of Silicon filling Gun.
Supply of Silicon Silica black / brown solvent bottle containing solvent of 550 ml each.
Supplying of Nylon rope 6 mm dia
Supplying of MS Safety chain for doors
Providing and fixing structural steel of approved grade of approved manufactures using steel sections such as angles, flat, tees, channel, tubes, hollow section etc. of required sizes at all levels and locations including cutting, fabricating, welding, erecting & fixing in posion, necessary scaffolding and including painting one coat Zinc chormate primer and two coats of synthetic enamel paint of approved make and colour on all exposed surfaces etc. compete all as directed by the Engineer-in-charge.
Brick work at all levels & location using Ready mix cement mortar 1:4 using well burnt locally available bricks of approved quality including scaffolding, raking out joints above ground level simultaneous pointing below ground level, curing, scaffolding,etc. complete all as per specifications & as directed by the Engineer-in-Charge.
Cement plastering using factory manufactured pre mix/ready mix mortar of approved make minimum composition of C:S is 1:4 suitable for internal plastering to wall and ceiling finished smooth over brick walls or concrete surfaces including acrylic based membrane curing of M/s Anuvi chemicals/Fosroc/Dr.fixit at all floors and levels, including scaffolding, removing existing damaged/ worn out plastering and disposing off debris with in colony etc., complete all as per specifications and as directed by EIC.
b) 15mm thick.
Sand faced cement plaster 20 mm using factory manufactured pre mix/ready mix mortar of approved make minimum composition of C:S :: 1:4 suitable for external plastering over brick walls or concrete surfaces with base coat of 12 mm thick and finishing coat of 8 mm thick final rendering, including acrylic based membrane curing of M/s Anuvi chemicals/Fosroc/Dr.fixit at all floors and levels, including removing existing damaged/ worn out plastering and disposing off debris with in colony etc., complete all as per specifications and as directed by EIC. (Scaffolding shall be paid under relevent item) NOTE:1. The contractor must take full precautions that original brick work is not damaged while dismantling of plaster. Incase of any damage the same shall be made good with 25g chicken wire mesh at his own cost. No separate payment for any additional thickness of plaster if any will be made. Contractor must visit site and acquint himself with the condition of building.
Plain cement concrete using graded stone aggregate of 20mm max. size including consolidation, finishing, curing, cost of form work, shuttering, centering etc. at all level and locations complete all as per specification & as directed by the Engineer-In-Charge.
Supplying and injecting with approved quality chemical emulsion at the rates and concentrations as per IS 6313-2001 Part II for post -constructional antitermite treatment and creating a chemical barrier alround the plinth filling, junctions of wall and floor, expansion joints, surrounding of pipes, conduits etc., walls above floor level, apron and drain along the perimeter of the building including all byeworks complete as per specification / IS 6313:2001 or latest revision and direction of Engineer Incharge . Work to be executed by approved agency and specified guarantee for 03 (three) years shall be furnished by the contractor.
Providing and fixing precoated with high durable polyester paint G.I CRCA 0.5 mm (min) thick steel sheets manufactured by M/s. Essar/ Jindal steel sheets make in SR-25 module of Stucco fixing over RCC roof on M S frame at all floor and locations,including bending at required angle, including necessary ridges and gable ends, valley and over lapping shall be 200 mm, fixing the sheet with self tapping SS Screws fixed with machine with bituminous washers/ GI bolt of 8 mm dia. The base metal shall be CRCA Steel having minimum yield strength of 240 MPa and minimum UTS of 280 MPa, Galvanized to 120 gsm zinc coating mass (total both sides) as per I S: 277 or conforming to AS: 3566 Class 3 of rust shield/ corroshield make including grouting over RCC slab/ columns/ Cast- in- situ PCC blocks in line level and level, at all levels including necessary scaffolding etc. complete all as per approved drawing and as directed by Engineer- in- Charge.
Supplying & fixing 25 mm thick PVC integral free foam sheet in form of flush finish door shutter, manufactured by M/s. Jain Irrigation Systems Ltd. (Ex-cel sheet) / M/s. Rajashree plastiwood or other equivalent approved make of white colour, solid section, extruded rigid, light weight sheet with fine & homogeneous closed cell structure with smooth, glossy, hard surface finish on both sides including providing recessions for hinges and providing & fixing 3 nos 100 mm heavy duty S.S. hinges and 2 Nos. 100 mm heavy duty aluminium baby latches, 2 nos. of 100 mm Al. Bow handles with back plate of M/s Shalimar Hardware or equivalent and including providing a vision panel opening of size 300 mm X 200 mm including providing and fixing PVC moulded louvers on both faces in the opening of vision panel with ss screws, all edges to be smooth finish with mixture of PVC powder & solvent etc complete all as per specification and as directed by the EIC. Note:- 1) The entire door shall be jointless shutter. 2) The sizes shall be approximately 650 mm x 2000mm, however exact dimensions shall be measured at site before manufacturing.
Providing and fixing second class teak wood in frames of required sections for doors, windows, ventilators, clear storey window, partition, railing, battens & rafters etc.wrought framed and fixed in position including providing and fixing M.S. hold fasts of size 200 x 30 x 3 mm embedded in concrete block of P.C.C. 1:3:6 and labour for fixing frame in position including applying one coat of approved wood primer & two coats of synthetic enamel paint to the exposed surfaces and two coats of bituminous paint to the surfaces of frames in contact with masonry/ concrete etc. including removing the old damaged frames transporting to Deptt. Stores and making the adjacent plaster good to match with existing surfaces, etc. complete all as directed by the Engineer-in-Charge.
Description of Work / Item(s)
Amount
PART- B : P H WORKS
Labour charges only for carefully removing / dismantling the existing PPR Water supply pipe line of all dia. in all sizes, along with its existing fittings at all floors and location including cleaning the pipes with thin rod, removing sand particles or miscellaneous other obstructions in pipes and fittings including labour charges for replacing the damaged / unserviceable G.I. Pipes & fittings wherever found necessary including refixing the same in its original position in proper line, level and plumb with necessary specials / fittings making threadings, jointing the pipes and fittings with hemp yarn, white zinc paste, clamping, testing the pipes & fittings for leak proofness and smooth working including returning the defective / unserviceable materials to stores of maintenance Units etc. complete all as per specifications and as directed by the Engineer-in-Charge. NOTE: Necessary materials required for replacement shall be supplied by the deptt. free of cost.
Providing & fixing Wall mount European water closet similar to M/s Hindware cat no. 20098 Flora Wall mounted closet conforming to IS 2556 (part II ) with 'P' or 'S' trap wash down pattern European water closet of approved (Cera, hindware/parryware) make in white glazed vitreous of size 460 mm x 330 mm ,including all fixing accessories,white cement & including cost of removing the existing one & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge.
Providing & fixing approved make Orissa pattern W.C. conforming to IS 2556 ( part-II) comprising of Orissa pattern W.C. with 'P' or 'S' trap in white glazed vitreous china ware of size 580 mm x 400 mm including the cost of removing the existing damaged / broken and making good the surrounding with cement mortar / concrete tiles maching to the existing finish & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge.
Providing & fixing approved quality wash basin with plain rims in white glazed vitreous chinaware supported on suitable wall brackets and of size mentioned below, including cost of removing the existing wash basin and necessary C.I. brackets shall be provided by the contractor including all the labour charges for fixing the existing fittings such as piller cock, inlet connection, stop cock, wash coupling, bottle trap etc. & disposing of debris out side colony etc complete all as per specifications and as directed by the Engineer-in-Charge.
a) 550 mm x 400 mm.
b) 450 mm x 300 mm.
Providing & fixing approved C.P. brass towel rods of size 600 mm x 20 mm with a pair of C.P. brass brackets, wall flanges ,C.P. brass brackets, etc. fixed to wall with C.P. brass screws, screwed on to rawl plugs etc complete including the cost of removing the existing one & returning to Stores etc complete all as per specifications and as directed by the Engineer-in-Charge.
Providing & fixing heavy quality 15 mm dia inlet connection with unions at the ends plastic pipes with brass unions including the cost of removing the existing one etc complete all as per specifications and as directed by the Engineer-in-Charge.
a) size 600 mm long
b) size 450 mm long
Providing & fixing approved heavy quality solid plastic seat and lid of white shade with C.P. brass pillar hinges conforming to IS 2548 and including cost of removing the existing one depositing to deptt. stores etc complete all as per specifications and as directed by the Engineer-in-Charge,
a) Hollow type of European water closet
Providing and fixing in position bevelled or plain edge mirrors made out of best Indian glass 6 mm thick of approved manufacture, mounted on asbestos cement sheet 6 mm thick fixed in position with 4 Nos. C.P. brass screws with detechable C.P. brass caps washers, rawl plugs and incuding removing the existing one and depositing to deptt. stores etc complete all as per specifications and as directed by the Engineer-in-Charge.
a) size 600 x 450 mm.
Providing and Fixing PPR Ball valve with S.S balls & Specials, if required of approved make suitablefor pipe pressure class, making water proof joints,for pipe pressure class, making water proof joints,ncluding cost of jointing material and PPR specials if required, testing the joints etc. complete as per directions of EIC. PPR Ball Valve (IS 3917)
20 mm dia.
25 mm dia
32 mm dia.
40 mm dia.
50 mm dia.
63 mm dia.
Labour charges only for carefully removing of all type of chokages as & when required at various floor levels from kitchen sink, wash basins, bathrooms, water closets, gully trap chambers ,internal inspection chambers & drain pipes in service shafts of residential & non- residential building viz low rise building having Ground + 1 & upto Ground + 4 upper floors incluinding cleaning existing ACC & waste soil pipes stone ware pipe lead/CP brass 'P' trap and bottal traps etc. of the above sanitary fixtures by the rodding or other suitable means like mechanical choke remover machine with KIWI Drainage chemicals hand pumps and all other cost for incidential charges to complete the job, whenever found necessary including throroughly removing the dirt, seware sludge and miscellaneous rubbish in and around the inspection gully trap chambers & disposing at the same away from building within a lead of 150 m or to the nearest disposal ground including washing the floor aeras in service shafts with phenyl water all inclusive of labour, tools, phenyl etc. complete all as directed by the Engineer-in-Charge. Note:- 1) The contractor shall make his own arrangement for opeining & closing of plugs of cleaning eyes for waste soil pipes, lead trap etc. at his own cost. 2) The chokages complaints shall be attend proparly by the contractor by arranging sufficient number of labour commensurate with the magnitude of work involved. The labour shall be made available daily for full day for his working days a week during the working hours of the maintenance office.
a) for Chokes in bath/WC/ Kitchen sink/ wash basin/ nahani Trap
b) for Chokes in gully trap
c) for Chokes in inspection chambers
d) for Chokes in Manhole.
Providing & fixing on Exposed or concealed surfaces the following dia PPR pipe of specified class of M/s. SUREME / PRINCE or other approved equivalent consisting following items of work:- i) Supplying & fixing PPR pipes, including necessary all fittings conforming to relevant IS code ii) Laying and fixing the pipe and specials on exposed surfaces to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/screws, rawl plugs, wooden gutties and branded clamps of Supreme/Prince make to the pipeline as per the site requirement. iii) Testing the pipe line to a hydraulic pressure as per manufacturers cataglouge for leak proof joint or as per relavant code iv) Making leak proof threaded / solvent joints. including cutting the pipe, Joint preparartion, cleaning, marking, application of solvent, assembling, curing etc. and the cost of jointing cement solvent materials. v) Cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition. proof joints. vi) Providing and fixing PPR jointable / threaded fittings such as Union, Nipples, Bendes, Elbows, Tees, Reducers, End caps, Couplers, Adaptors, Saddles, Plugs, Tank connectors, Expansion loops, Bypass bends, etc vii) including removing existing GI pipe line/cPVC/uPVC/PVC /PPR with fittings and specials etc. Note:- All brass threaded elbows and fittings shall be with additional support type of M/s. Prince, Supreme or other equivalent approved by EIC including necessary fixing arrangement such as screws, plug etc complete. ( Mode measurement :- The measurement shall per Unit RM length of pipe line laid or fixed. The measurement shall be taken along centre line of pipe. No measurement shall be recorded saperately for fittings etc. ) PPR Pipes and Fittings
a) 20 mm n.b
b) 25 mm n.b
c) 32 mm n.b
d) 40 mm n.b
e) 50 mm n.b
f) 63 mm n.b
Supplying and fixing heavy Quality CP brass hand held jet spray (Health Faucet) of approved make and sample for ablution (minimum weight of 250 grams for CP brass jet spray only) without pipe & wall bracket etc.
Providing & fixing C.P. metal wrapped- PVC flexible 15 mm dia pipe-1.00m long with one end check nut & other end 32mm long socket with washers for connecting the hand spary of make BPI or equivalent (wt. not less then 250 gms) , wall bracket etc. complete all as per specifications & as directed by the Engineer-in-Charge.
Providing & fixing in position approved quality CP brass stop cock/angle cock/Bib tap / Sink tap etc. of 15 mm nominal dia. with IS mark / approved make of following type including providing & fixing GI specials ,wall flanges and fixing to concealed / exposed G.I.pipe line with leak proof threaded joints using spun yarn, white zinc etc., testing the joints, rectifying the leaky joints, if any, including cleaning etc. complete all as per specifications and as directed by Engineer- in- Charge.
a) C.P brass Bib tap with wall flange, .similar to 'Continental series ' of ' JAQUAR' Cat. No. 047
b) C.P brass long body Bib tap 2 in 1 similar to . Continental Series' of ' JAQUAR' including providing and 'fixing Health faucet with 1.0 mt long flexible tube and wall hook( JAQUAR make Cat. No. 573).
Angular Stop Cock with wall Flange similar to 'Continental series' of '' JAQUAR'.
C.P brass Sink Tap with swinging casted Spout (wall mounted type ) similar to 'Continental series' of ' JAQUAR'.
a) C.P. brass Pillar Cock 15 mm size auto closing system with Aerator 'PRESSMATIC' as per'Jaquar' cat. PRS- 031.
a) C.P.brass 15 mm size auto closing Flush valve with wall flange Pressmatic as per Jaquar .
Providing & fixing good quality SS floor grating (Jali) in bath & toilet including fixing the jali with white cement matching the floor level etc. complete as per specification, drawings and as directed by EIC.
Labour charges for attending emergency complaint of exposed PH fitting leakage including all material like-tee/elbow/coupling of GI/CPVC/PPR, solvent, tools etc. complete all as per specifiction and as directed by EIC
Labour charges for attending emergency complaint of concealed PH fitting leakage including breaking of tiles/plastering/concrete and providing all the required material like tee/elbow/coupling of GI/CPVC/PPR , solvent, tools etc. complete all as per specifiction and as directed by EIC
Supplying only of following PH Items
(A) 'JAGUAR' - Continental Series - i)Continental knob ZKB-001 with tikki and screw.
ii) spindle ( code No : ZCA - 001)
iii) Piston with O ring ( code No : ZCA - 008)
iv)Bush with O ring ( code No : ZCA - 007)
v) Center lever handle for wall mixture ( code No : ZKB - 049)
vi) Aerator for wall mixture 24 mm ( code No : ZMS - 069)
vii) Aerator for sink cock 18mm ( code No : ZMS - 069)
( B) PPR pipe fittings i) 20 mm brass elbow
ii) 20 mm coupling
iii) 20 mm brass tee
i) 25mm brass elbow
ii) 25mm coupling
iii) 25mm brass tee
i) 32mm brass elbow
ii) 32mm coupling
iii) 32mm brass tee
i) 40mm brass elbow
ii) 40mm coupling
iii) 40mm brass tee
iv) CPVC Solvent Cement Ultra Strong for CPVC and UPVC Pipes and Fittings (200 ml, Tin Can )
Plain glass self with edge polishing - 450mm x 100 mm x 6mm thick
Plain glass self with edge polishing -600mm x 100 mm x 6mm thick
Heavy duty glass self bracket (for 6mm thick glass) 100 mm long.
PPR pipe heating gun suitable for jointing 15 mm to 50 mm PPR pipe.
Supplying 10 mm dia 100 mm long S.S. Anchor bolt for fixing wash basin
Pressure Release Valve i) Pressure Reducing Valve 32 mm
ii) Pressure Reducing Valve 40 mm
iii) Pressure Reducing Valve 63 mm
Up to 1.5 m depth from GL
CUTTING OF ASHPALT: Cutting the existing asphalt macadam road for exposing, laying pipe lines, sewers, cables etc. up to & including random rubble soling & making good the same after satisfactory completion of work but excluding black topping, watering, ramming, all complete as directed & to the entire satisfaction of EIC
DEMOLISHING OF PCC: Demolishing plain cement concrete work by chiselling at all levels including disposal of removed materials within 50m lead all as directed by Engineer-In-Charge.
CUTTING OF PIPE: Cutting the existing following size diameter water supply pipe line for inserting C.I. specials, fixtures etc. without damaging the adjacent pipes, disjointing the lead joints if necessary, removing the pipes if required as per site conditions & relaying it back after inserting the specials or fixtures in position, isolating the pipe line before cutting etc. all as directed & to the entire satisfaction of EIC. NOTE: One no of cutting=two cuttings of the pipe line)
Dia 80 mm to 100 mm dia
CI/DI SPECIAL FITTINGS: Providing, laying, jointing & fixing DI conforming to IS :9523, external zinc bitumen coated & internal cement mortar mechanical,flanged, and/or push-on type fittings/specials, K-12 class of approved make like tees, bends, collars, reducers, enlargers of all sockets, socket & spigot or double end flanged etc. with sealing rubber gasket of SBR conforming to IS :5382 and or IS 12820 with ISI mark, cast/ductile iron follower gland, MS nuts & bolts coated or otherwise protected from rusting, suitable for D.I. pressure pipes for water supply to correct alignment and levels including jointing the specials to pipe line & testing the specials to appropriate hydraulic pressure alongwith the pipe line with clean & potable water as per specifications Note: The above costs includes 'push-on' /mechanical joints with gaskets, bolts, nuts etc. .
CPVC FLANGE JOINT: Providing & jointing of dia 80 mm n.b CPVC flanges of schedule 80 of Prince / Supreme or equivelent make following sizes chlorinated polyvinyl chloride (C-PVC) pipe of specified class .- i) Supply & fixing C-PVC flange , including necessary all fittings confirming to IS -15778. (ii) Laying and fixing theflange and specials on exposed surface to correct line, level and plumb for water supply line, make to the pipeline as per the site requirement. (iii) Testing the pipe line to a hydraulic pressure as per manufacturers catalogue for leak proof joints or as prevalent code.
CPVC PIPE & FITTINGS: Providing & fixing on exposed or concealed surface the of Prince / Supreme make following sizes chlorinated polyvinyl chloride (C-PVC) pipe of specified class .- i) Supply & fixing C-PVC pipes, including necessary all fittings confirming to IS -15778. (ii) Laying and fixing the pipe and specials on exposed surface to correct line, level and plumb for water supply line, overflow and vent using M.S. nails/ screw, rowel plugs, wooden gutties and branded clamp of Supreme /Prince make to the pipeline as per the site requirement. (iii) Testing the pipe line to a hydraulic pressure as per manufacturers catalogue for leak proof joints or as prevalent code.(iv) Making leak proof threaded /solvent joints, including cutting the pipe, joint preparation , cloning, marking, application of solvent materials (v) Cutting or making the holes or chase in RCC or brick work structure such as wall, column, beam , slab , chajja & dada etc. for passing the pipe line and reinstating all the damage to its original condition proof joints. (vi) Providing & fixing C-PVC joinable/ threaded fittings such as Union, Nipples, Bends, Elbows. tank connectors, Expansion, Loops ,Bypass, testing the pipes with clean & potable water as per standard specifications including removing of existing pipes & transporting the same to the DCSE stores all as directed by EIC.
GUN METAL VALVE: Providing and fixing Gunmetal Gate valves of New/ Sant / Leader make following dia. confirming to IS-778 with new hand wheels at top including fitting like elbows, tees, unions, couplings, reducers, enlargers, bends etc. all other fittings required for completion conforming to IS: 1239 including testing for 10kg/Sqcm with clean & potable water as per standard specifications & as directed by EIC.
CPVC MTA BRASS FITTINGS: For Gun Metal Valve dia 50 mm Providing & fixing Required Brass CPVC-MTA of Prince or Supreme make conforming to I.S. specifications including cutting the pipes to required length & replacing the pipes by new one and cost of all jointing
For Gun Metal Valve dia 80 mm : Providing & fixing Required Brass CPVC-MTA of Prince or Supreme make conforming to I.S. specifications including cutting the pipes to required length & replacing the pipes by new one and cost of all jointing
CPVC FTA BRASS FITTINGS: Providing & fixing Required Brass CPVC-FTA of Prince or Supreme approved make for Float Valve Valve dia 50 mm of schedule 80 conforming to relevent I.S. specifications including cutting the pipes to required length & replacing the pipes by new one and cost of all jointing.
CORE CUTTING FOR SUITABLE DIA 50 mm n.b. pipe Drilling of 65 mm dia hole in R.C.C. structural members upto 450 mm thick by installing core cutting machine by fixing 4 Nos. dash fastener 12 mm dia, operating core cutting machine cleaning the whole , Removing core cutting machine, filling anchor
CORE CUTTING FOR SUITABLE DIA 80 mm n.b.pipe : Drilling of 65 mm dia hole in R.C.C. structural members upto 450 mm thick by installing core cutting machine by fixing 4 Nos. dash fastener 12 mm dia, operating core cutting machine cleaning the whole , Removing core cutting machine, filling anchor
U BOLT BRACKET For 50 mm n.b Pipe . Providing & fixing galvanised iron slotted bracket "C" type 150mmx125mmx3mm thick on wall faces for fixing pipes complete in all respect
U BOLT BRACKET For 80 mm n.b. Pipe Providing & fixing galvanised iron slotted bracket "C" type 150mmx125mmx3mm thick on wall faces for fixing pipes complete in all respect
FLOAT VALVE : Providing and fixing Float valve of size dia 50 mm of Prayag or equivalanet make following dia.& replacing the same by transporting & laying new Prayag or equivalent approved make including fitting like elbows, tees, unions, couplings, reducers, enlargers, bends etc. all other fittings required for completion conforming to IS: 1239 including cutting the pipes to the required length & replacing the pipes by new one including the cost of all jointing materials like hemp yarn, white or red lead, painting the pipes with bituministic paint & hessian cloth, scraping, testing the pipes with clean & potable water as per specification & as directed by EIC.
Description of Work / Item(s)
Amount
PART-C - Electrical Work
Assisting department technician in Day to day maintenance work in residential flats under TTM-I,II & WS maintenance units, as per clause no. 1 of specifications of Maintenance contract.
Assisting department technician in Day to day maintenance work in residential flats under TTM-I&II maintenance units -Electrician 1 No & Helper- 1 No for Electrical works for checking, repairing, refixing/ replacing Electrical fittings & fixtures, etc. and whatever required. For Parasnath, Jayantia and otherResidential flats under TTM-I & II maintenance unit
Supply of Electrical materials, fitting & fixtures. MCB/MCCB/RCCB/RCBO, Metal plug & socket DB's
RCBO 4 pole, 32 Amp, 30mA make Legrand CAT. No. 603398
Miniture circuit breker single pole 16 Amp Make Legrand CAT. No. 603234
Miniture circuit breker single pole 20 Amp Make Legrand CAT. No. 603235
plate cover with frame similar to ATHENA model of M/s. CRABTREE
Modular Cover Plate 1 Module ATHENA Make CRABTREE CAT. No. ACAPNCW-V01
Modular Cover Plate 2 Module ATHENA Make CRABTREE CAT. No. ACAPNCW-V02
Modular Cover Plate 3 Module ATHENA Make CRABTREE CAT. No. ACAPNCW-V03
Modular Cover Plate 4 Module ATHENA Make CRABTREE CAT. No. ACAPNCW-V04
Modular Cover Plate 6 Module ATHENA Make CRABTREE CAT. No. ACAPNCW-V06
Modular Cover Plate 8 Module ATHENA Make CRABTREE CAT. No. ACAPNCW-V08
Switches/ sockets/ DP switches similar to ATHENA of M/s. CRABTREE.
6 AMP 1 WAY SWITCH ATHENA MAKE CRABTREE CAT. NO. ACASXX-W061
6 AMP 3 PIN SOCKET ATHENA MAKE CRABTREE CAT. NO. ACAKPX-W063
16 AMP 1 WAY SWITCH ATHENA MAKE CRABTREE CAT. NO. ACASXX-W161
6-16 AMP 3 PIN SOCKET COMBO ATHENA MAKE CRABTREE CAT. NO. ACAKC-XW163
10-25 AMP 3 PIN SOCKET COMBI ATHENA MAKE CRABTREE CAT. NO. ACAKCX-W253
FAN REGULATOR 5 STEP MAKE MAKE CRABTREE CAT. NO. ACARFH-W005
32 AMP DOUBLE POLE SWITCH ATHENA INDUSTRIAL MAKE CRABTREE CAT. NO. ACASDIW321
BELL PUSH ATHENA 10 AMP WITH INDICATOR MAKE CRABTREE CAT. NO. ACASBI-W100
BLANK PLATE ATHENA 1 MODULE MAKE CRABTREE CAT. NO. ACAPB-WX01
TELEPHONE SOCKET EJ11 ONE GANG MAKE CRABTREE CAT. NO. ACAKHA-W000
TV SOCKET ATHENA MAKE CRABTREE CAT. NO. ACAKTO-W000
ENCLOSURE FOR MCB DOUBLE POLE MAKE HAVELLS CAT. NO. DHDESDP
COVER FOR MCB BOX DOUBLE POLE MAKE HAVELLS CAT. NO. DHDESDP
MCB CHANGE OVER SWITCH 25 AMP DOUBLE POLE MAKE HAVELLS CAT. NO. DHDESDP
ENCLOSURE FOR RCBO MAKE LEGRAND CAT. NO. SD4906
Electronic Musical door Bell having Poly Carbonated External body, bul bul bell tune, including transformer, transmitter, amplifier, 250 V, AC, Similar in all respect to Vinay Rosy Bell
Instantaneous mini water heaters accessories
Heating elements / Coil of 3Kilowatt power spherical type double nipple/cup type suitable for 1 liter instantaneous mini water heaters,cup type,similar to sparehot make
Thermostat for 3 Kw instantaneous mini water heaters, having Temperature range from 25 - 75 degree celcius of 20A, 240 V, IS - 3017class- 1, 175 mm, Type BST - 7 suitable for 3KW instant water heater.
Thermal cutout for 3 Kw instantaneous mini water heaters, having Temperature range 90 degree celcius of 20A, 240 V, class- 1, 175 mm, Type BST - 7 suitable for 3KW instant water heater.
Packing rubber / Gasket, for 3 KW instantaneous mini water heaters
Indicator Lamp, for 3 Kw instantaneous mini water heaters
Fusible plug, for 3 Kw instantaneous mini water heaters
Safety-Valves, for 3 Kw instantaneous mini water heaters
PVC Safety-tube, for 3 Kw instantaneous mini water heaters
Lamp Holder & 5" round PVC plate / Square Box Batten Holder / Angle holder / pendent holder/ ceiling rose
Angle holder
Batten holder
ceiling rose
5" round PVC plate / Square Box with nylon / rawal plug, GI wood screws
Ceiling fan of following sizes without fan regulator
1400mm sweep similar to velocity model of M/s Havells with safety chain
Capacitor 2.5 mfd MPP type (metal body explosion proof) for ceiling Fan
Disconnection, dismantling and replacemnt including supply, installation, testing & commissioning of 1 ltr. Mini instantaneous pressure type water heater complying to IS 8978, vertical round type operating on 240V AC ,50Hz supply with 3kW heating element complete with all accessories. ISI marked, stainless steel inner container including SS base and SS pipes on which heating element & accessories are connected and ABS plastic outer body, pressure release valve, thermostat, thermal cutout, fusible plug, reset button for thermal cutout, connecting to water heater point with suitable size of 3C flexible copper conductor chord, all as per requirement & as instructed by Engineer-In-Charge. Note: - i) Interconnection of water heater with existing water heater pipe line with 15mm dia flexible steel braided plastic pipe of suitable length is in the scope of work. ii) The water heater shall be provided with suitable bracket for wall mounting and the bracket shall be got approved by the department. iii) Scope of work also includes deposting the existing water heaters to DCSEM/TVS stores.
Om Enterprises
SUNIL CONSTRUCTION
Om Enterprises
SUNIL CONSTRUCTION
SUNIL CONSTRUCTION
Om Enterprises
SUNIL CONSTRUCTION
ANAND ENGINEERING WORKS
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .