ELECTRICAL WORK

Amount

Repairing strengthening of damage/rusted legs of following towers of 132 KV Bhoor-Khurja Line. Loc No. 13 Legs 01 Loc No. 14 Legs - 03 Loc No. 138 Legs - 02 Loc No. 140 Legs 02 Loc No. 141 Legs 03 Loc No. 142 Legs - 02 Loc No. 143 Legs - 01 Loc No. 144 Legs - 01 Loc No. 160 Legs - 02 Loc No. 165 Legs - 01 Loc No. 166 Legs-02. (A) Digging the earth surrounding the chimney up to 1000 mm and breaking the chimney 600 mm below the ground level and 300 mm above the ground level including the removing soil and rust from the stub for making sutiabel lap joint to each stub. (B) Making the 02 Nos. cleat of 600 mm length suitable for inner and outer surface of stub from galvanized steel angle of suitable size 120x120x8 mm /110x110x8 other size mm by cutting, drilling and holes etc. Note :- Material will be provided by the department free of cost. (C) Fixing the inner and outer cleats on damaged/rusted stub in middle by making suitable holes of size 16 mm corresponding to cleats and proper tightening with nut and bolts. (D) Appling of two coat anti rusted paint on repaired stub (approx lenght of each stub is 1.0 mtr) (E) Remaking and increasing of chimney heigh of 500x500 mm up to the lenght of 1000 mm by using cement concrete in ratio 1:2:4 of cement fines and twenty mm, stone grit after placing proper shuttering including back filling of excavated earth, proper curing and removal of all shuttering.

RAHUL ELECTRIC ENGGINEERING WORKS

KARAN SINGH