REPAIRS TO FENCING, DRAIN, PATH AND HARDSTANDING AT ILP-I, NAR BAHADUR THAPA ENCLAVE, BATRA ENCLAVE AND ADJACENT AREA IN AOR OF AGE B/R-I UNDER GE PANAGARH

Amount

Demolition for brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with old size bricks flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

All as per ser item above but except bricks. Note: Servicable bricks obtained from demolition shall be re-used after proper cleaning complete all as specified.

M&L for old size brickwork with flyash bricks, straight or curved on plan exc 6m mean radius, half bricks thick built in CM (1:4) complete all as specified and directed

M&L for extra for forming fair finish drain channel upto 30 cm inner grith in cement concrete using extra cement complete all as specified and directed

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

M&L for cement concrete type B-1 1:2:4 (using 20mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed

M&L for 100 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 75 mm thick cement concrete type B1, for PCC (1:2:4) using 20 mm graded stone aggregate as in floors and pavings etc finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for 75 mm thick cement concrete type C2, for PCC (1:3:6) using 40 mm graded stone aggregate as in floors and pavings etc finishing cement concrete surface without using extra cement complete all as specified and as directed.

M&L for 50 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 40 mm thick Damp proof course to horizontal or vertical surfaces incl. necessary form work in cement concrete 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) complete all as specified and directed

M&L for Plain Cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

Dismantling post (Wood/Steel or RCC) any section including taking out embedded portion and making good disturbed portion complete all as specified and directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc) top section fixed including all necessary drilling,bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F framed work such as grills, gratings,etc,with ends of bars shouldered and /or riveted, or forged into spickes; framed guard bars; barried iron door;ladders;framed balustars; walk ways; railings; framed work of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed

Taking down cement or cement lime plaster, any descriptio on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etcomplete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 ) and finish smooth & even with using extra cement complete all as specified and directed

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl preparation of newly plastered surfaces of concrete complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Dismantling fencing wire mesh any type complete all as specified and directed by Engr-in-Charge

Supply and fixing galvanised iron wire using hot dip technology electrogalvanised coating chain link fencing wire mesh of size 75mm X 75mm having minimum dia of wire 3 mm conforming to IS 2712-2003 having a tensile strength of 400 to 500 MPa. The mesh wire and line wire of the fabric shall be manufactured from ISI marked (Make:TATA wireon) galvanized steel conforming to IS-280:2006 (4th Rivision). The kunckled ends should be atleast 50% of the size of square mesh. The wires used in fencing should be long lasting and resistance to corrosion and testing criteria fulfill the requirement as per IS 1161:1998 complete all as specified and directed. MAKE : TATA/JINDAL/SHYAM STEEL PVT LTD

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, n.exc 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M&L for refixing of old machine pressed precast concrete interlocking paver block of any shape and size with grey cement and pigment complete all as specified and directed

M&L for 25 mm thick chequered cement concrete tiles of approved size, set, jointed and pointed using with grey cement and pigment in floors, pavings etc including the setting and jointing in neat cement plaster or slurry 0.3 kg/sqm over 20 mm thick screed bed or bedding layer in cement mortar (1:6) complete all as per specification.

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft/ loose soil complete all as specified and directed

Removing Excavated soils exceeding 250 M but not exceeding 500 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed

M&L for hardcore of broken stone of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for red bajri /clinker filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and directed

Dismantling of old barbed wire and making rolls including stacking neatly complete all as specified and directed by Engr-in-Charge

S&F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured), complete all as specified and directed

Restraining resecuring including making good staples etc, galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured) complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

Demolition of cement concrete (reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat fair finished surfaces of concrete complete all as specified and directed

M&L for reinforced cement concrete (Design Mix) M-25 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed

M&L for mild steel TMT bar 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for column, hooking end binding with binding wire and including mild steel wire(annealed) not less than 0.9mm dia complete all as specified & directed by Engr-in-Charge.

All as per item No 43.00 mentioned above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

M&L for removal and cleaning of vegetation on old fencing/security walls and removal of small plants of girth exc 5.0 cm and n.exc 30 cm including root from RCC/Brick/ concrete surfaces up to a distance of 1.20 meter, pouring of acid chemical over root of plant surface and cleaning the area by removing/throwing the debris/vegetation etc complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or in weep holes etc including taking down old pipes complete all as specified and as directed by Engr-in-Charge.

SANJAY KUMAR SUPAN (BID ID -3115949)

M/S JOYGURU ENTERPRISE (BID ID -3115990)

M/S DYNAMIC INDIA (PROJECT) CONSTRUCTION (BID ID -3116028)

M/S S M ENTERPRISE (BID ID -3116056)

ANSH CONSTRUCTION (BID ID -3115807)

S.P.S. SUPPLIERS (BID ID -3115853)

BISWAS ENTERPRISE (BID ID -3116088)

KAZI SAHABUL ALAM (BID ID -3116175)