8123/SAR-61/2023-24 SPECIAL REPAIR TO CANDIDATE MESS AND BILLETS, INSTALLATION OF GERMAN TECHNOLOGY BASED GREASE TRAP AND PROVN OF WALL PANELING IN ALAKNANDA CONFERENCE ROOM AT MESSES OF AF STN DEHARADUN UNDER GE (AF) SARSAWA

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L or J hook as specified and directed.

S & F for Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) , complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

M&L Glazed ceramic tiles in vertical surface 350x 250x 7mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed

M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L rendering 10mm thick (cement mortar 1:4) on fair/unfair faces of brick or concrete surfaces surfaces rough for receiving subsiquent layer complete all as specified .

M&L rendering 15mm thick (cement mortar 1:6)on fair/unfair faces of brick or concrete surfaces surfaces finished even & smooth without using extra cement complete all as specified .

M&L rendering 15mm thick (cement mortar 1:4)on fair/unfair faces of brick or concrete surfaces surfaces finished even & smooth without using extra cement complete all as specified .

M&L for preparation of old plastered/treated surfaces and applying one coat of oil bond distemper on old plaster surface in any height complete all as specified and directed

M&L for two coats of oil bound distemper over Chalk whiting, on plastered surfaces,prepara-tory to distempering in any height complete all as specified and directed

M&L for proparation of old plastered/treated surface and applying one coats of cement base paint on old plaster surface in any height complete all as specified and directed

M&L for two coats of cement base paint over a coat of priming plastered and other surface with alkali resistance priming paint surface including preparation of surfaces in any height complete all as specified and directed

Demolation of brick /stone/block masonry built in cement mortar all as specified and directed.

M & L For brick work with sub class B bricks old size bricks straight and curveed on plan exc 6 mtr meand radius built in cement mortar 1:6 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.

Supply and fix 4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares n.exceeding 0.50sqm in each pane , complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level), complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even , complete all as specified and directed.

Taking down chowkhats or frame (with taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4.00 Sq m each, complete all as directed.

Taking down chowkhats or frame with shutters (with taking off shutters from the frame) n.exceeding 1.50 Sqm, complete all as directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, S&F in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails .MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail ,bottom rail and lock rail, Paneling of rudraksha colour PVC sheet to be fitted in MS frame welded with and including stainless steel hinges 100mm medium weight complete all as specified and directed.

Taking up or down steel tubing and connection incl removal from site bore of pipe 15mm.

Taking up or down steel tubing and connection incl removal from site bore of pipe 20mm.

S&F 15mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore pipe medium grade galvanised iron with all fittings fixed to wall and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.

S&F in repair viterous china squatting pan (orissa pattern) long pan size 580x440mm white with integral footrest with 'P' or 'S' trap complete (excluding flushing cistern and flush pipe) complete all as specified

S&F in repairs vitreous chinaware wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe including Heath fusset etc complete all as specified and directed

S & F in repairs vitreous china urinal, half stall type, white including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plug with and incl 60 mm long brass screw, pointing around urinal back in cement, fixing flush pipe, grationg and union of dischage pipe.including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc comple incl making good to floor.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete

S&F in repair 10 ltr capacity PVC low level flushing cistern including PVC syphon and float valve with PVC long band for out let connection of cistern with WC complete fixing the cistern with wall in pressured connecting with WC complete all as specified and directed

S&F in repair 15mm bore chromium plated fancy type bib tap of cast copper alloy with crutch of butterfly handle, screwed in iron pipe complete all as specified.

S&F in repair chromium plated stop valves/ angle valve cast copper alloy, screwed down both high pressure, with crutch or butterfly handle, screwed both ends fixed, 15mm bore complete all as specified ( Make Jaguar)

S&F in repair 15mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed (Make: jaguar)

S&F in repair CP mixer for mixing hot & cold water for wash hand basin single lever complete all as specified and directed .

S&F in repair CP wall mixer for mixing hot & cold water complete all as specified and directed

Supply and fix in repair 32 mm dia PVC waste pipe for WHB 90 cm long with union, complete all as specified and directed. equivalent).

S&F in repair 15mm chromium plated brass health fauet or jet with all fittings for water closet complete all as specified and directed.

S&F in repair with chromium plated brass screws Soap dish vitreous china white approximate size 160x160x90mm

M & L for 18 /19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

M&L for anodiezed aluminium sliding window (bombay sliding window) made out of hollow section as mentioned below and glazed with tinted colour glass 4 mm thick, fixed with glazing clips, rubber beading/gasket anodised beading, screw and lock thype handle of size 75mm, 2 Nos aluminium tower bolt 150mm long etc complete allas specified and directed. Shutter top & bottom size 37.50x15x1.60mm shutter inner lock size 37.50x15x1.60mm shutter side (handle) side 37.50x15x1.36 mm chowkhat bottom size 50.30x26x1.20mm chowkhat top and sides size 30x26x1.00mm complete all as specifed and directed.

S&F Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed

S&F for 40 mm flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both side.

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 200 mm long, complete all as specified and directed.

Supply and fix Aluminium handles, cast type, anodized, 150 mm size , complete all as specified and directed.

S&F for300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed , complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or elec?trogalvanised

S&F Locks for cupboard, grade I, size 50 mm in 2 (layer brass)

S&F for 1mm Plain,galvanised mild steel sheeting , in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275

Demolition of Wall and ceiling boards (fibre pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing PVC wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cment and fixing at site on PVC frame as per specification complete all as specified and as directed by Engineer-in-charge.

Demolition of cement concrete (reinforced) in Roof, floor (other than fround floors), beams, staircase, landing chajjas and similar suspended works complete all as specified and directed.

M&L for RCC Type B1(1:2:4 20mm graded aggregate) slabs supoorted on walls beams and columns in floors, roofs, landing balconies canopies deck slabs and in shelves and the like

S&F for TMT bars mild steel bars 10mm dia and over cut to length bent to shape required including ranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specfied and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick

Demolation of stone slabs and tiles of any descripton or thickness in floors aprons etc

M&L granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over cemnt screed base laid and jointed with grey cement clurry mixed with pigment to match the shade of the slag including rubbing an polishing complete all as specified and directed

Demolition and breaking up drain pipes and fittings of internal dia 75 to 100 mm and under (CI, PVC, AC etc ) set in cement mortar complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or in floors complete all as specified and directed.

S&F 75 mm PVC (SWR) bends any radius including jointing with solvent cement complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal including jointing with solvent cement complete all as specified and directed.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and directed.

S&F mild steel flat bar 25x3mm size of nearest suitable as ordered in required length including drilling hole for bolts notching for wind ties securing roof sheet confirming to Fe 290 Grade E-168 complete all as specified .

Taking down carefully unserviceable aluminum/copper point wiring (light/ fan/ socket/ power) complete including fittings such as switches, sockets, ceiling roses etc but excluding light fittings and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed by Engineer-in- Charge.

M&L for point wiring with 1.5 Sq mm nominal area PVC insulated and unsheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including PVC rigid concealed conduit (heavy grade) including chases cutting as required on site and conduit accessories along with continous earth wire 1.5sqmm PVC insulated and unsheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and including cadmium plated sunk Modular metal flush boxes for modular switches complete all as specified and directed, One light point controlled by one switch one way . Note:- modular white cover and plate with frame will be measured and paid saperately under respective item

All as per item No 2 here in before but One celling / Exhaust fan point controlled by one switch one way

All as per item No 2 here in before but One socket out let 5 Amps 5 pin on independent board

All as per item No 2 here in before but One socket outlet 5 Amps 5 Pin on same board with other switches

All as per item No 2 here in before but One light point contro lled by two 2-way switches.

All as per item No 6 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge. (circuit to be laid seperatly )

Supply and fix in repair modular switch 1 way 6 amps 1 module.

Supply and fix in repair modular switch 2 way 6 amps 1 module.

Supply and fix in repair modular socket outlet 2/3 pin 6 Amps combined 2 module

Supply and fix in repair modular socket 6A/16 A-2/3 pin combined 2 module.

Supply and fix in repair modular switch 1 way 16 amps 1 module.

Supply and fix in repair Fan step regulator,120 W -2 module.

Supply & fixing in replacement white modular cover plate with frame for fixing of modular switches of following :- (a) 2 module

All as per item No 87 here in before but 3 module

All as per item No 87 here in before but 4 module

All as per item No 87 here in before but 6 module

All as per item No 87 here in before but 8 module

All as per item No 87 here in before but 12 module

S& F blank speacer plate for single module

Taking down old unserviceable/rusted sunken box and supply and fix in replacement modular metal sunken box for mounting of modular switch/socket/regulators & including making good all disturbed surfaces complte all as specified and directed, of following :- (a) 2 Module

All as per item No 94 here in before but 3 module

All as per item No 94 here in before but 4 module

All as per item No 94 here in before but6 module

All as per item No 94 here in before but8 module

All as per item No 94 here in before but 12 module

M&L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC conduit with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 2.5 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed.

Supply and fixing in replacement of 20 Watt 6500K LED batten 2000 lumens cool light fitting with extruded aluminium housing four feet with integrated LED & electronic driver and all accessories pre-wired including connecting up complete all as directed.

Supply installation and commissioning and user training of Grease separator made of polyethlene as per DIN EN 1825, proven stability of 50 years, for below ground installation, overall dia of 1320mm, with ventilation provision, emptying via suction line DN 65PN 10, counter flange with fire hose quick coupling 75B and 2 1/2" blank cap and satisfy reaction to fire classA. Standard odour tight top cover of 600mm dia, clear opening, frame made of concrete material and cover made of cast iron with raising tube, load class A15 accoring to EN 124 inlet and outlet dia: DN 100. Inlet and outlet Dia : DN 100 Make: ACO : Model : Lipumax PD Nominal Size NS4 Grease storage : 270, Sluge Storage : 460L, Overall capacity : 930L Note : GST 18% Including

Supply and fixing PVC wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and as directed by Engineer-in-charge.

Supply and fixing PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specfication

M/s Inderlal

Nijamudin & Sons

L-7 Primewave Communications