Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical BHUPATINAGAR NEAR BLRO OFFICE PURBA MEDINIPUR PIN 721444 | MEDINIPUR EAST | WEST BENGAL | 721444 | Accepted-Technical TECHNICALLY QUALIFIED |
| 2 | Rejected-Technical | Rejected-Technical TECHNICALLY DISQUALIFIED |
| 3 | Rejected-Technical VILL PO BAINAN PS BAGNAN PIN 711303 DIST HOWRAH | BAINAN | HOWRAH | WEST BENGAL | 711303 | Rejected-Technical TECHNICALLY DISQUALIFIED |
Tender Value
₹2.5 L
EMD Value
₹5,075
Closing Date
25 May 2026, 6:00 pmClosed
EE/CID/PURBA MEDINIPUR
EE/CID/PURBA MEDINIPUR
Repair and maintenance to 3 nos. Sluices at Bamunia, Gour Maity and Majnaberia Sluice over Right Embankment of River Haldi and Kaliaghai in Block- Chandipur and Bhagwanpur-I, Dist.-Purba Medinipur (2nd Call).
2026_IWD_1024300_10
WBIW/EE/CID/e-NIT-02/2026-27
Open Tender
CIVIL WORKS
Percentage
30 days
Bhagwanpur-I
Please refer Tender documents.
6 documents required · 6 mandatory
₹5,075
3 Jul 2026
18 May 2026
28 May 2026
18 May 2026
25 May 2026
18 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking out old existing unservicable damaged draw/flap gate shutter of distributories/ branch canal/minor canal/channel completely after disengaging from hoisting system completely for installation of new gate shutter. The work includes cutting of gates into suitable pieces by gas cutting, removing the same by mechanical means or suitable crane, stacking all the pieces at the suitable place or departmental godown or as directed by the Engineer in charge. The cost includes cost of man power employed for dismantling and cost of consumables like oxygen, accetylene gas, hire charges of machineries, like chain pulley block, gas set, tools & tackles, scaffolding and safety equipments etc including carriage loading & unloading with all lead & lift. | 181.71 | KG | 6.81 | ₹1,237.45 |
| 2 | Fabrication , Supply, erection and commissioning of new Slide type vertical lift regulator service gates of Canal/River as per IS: 5620 - 2000/Latest Revision
consisting of skin plate, vertical and horizantal grider, stiffener etc. made of MS material consisting of angle , channel, beam, plate, flat, etc. conforming
to IS : 2062 -2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machinaries , Manpower, Cutting,
ligning, drilling, Welding, Finishing, Consumables, Carriages and all overheads with all leads and lifts complete as per specification (without painting)..
(i) Width of Gate shuteer size up to 2 metre | 605.71 | KG | 154.93 | ₹93,842.65 |
| 3 | Supply of bearings
C) Bearing no.51111 (SKF)(Thrust bearing) | 2 | EACH | 2,447.96 | ₹4,895.92 |
| 4 | Supplying, fifling & fixing Gun Metal Nut as per requirement having 1.5/2 T.P.I square thread for screw gearing arrangement, perfectly metting with
the screw rod/gear rod for lifting the draw shutter as per direction of E.I.C. The cost includes cost of materials, man power employed, consumables like
cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles etc including carriage loading & unloading. | 16.99 | KG | 1,682.82 | ₹28,591.11 |
| 5 | Supplying, fifling & fixing of screw rod having square thread of 1.5/2 T.P.I, Material bright steel [EN-8/EN9/forged Cl-4 (45C8) as per IS :1875 1992/latest Revision]. dia and thread length as required and providing with a drilled hole of required dia on the other end after flattened and supplying with one no. bolt and nut of required size and all other components as required as per direction of Engineer-In - Charge. The cost includes cost of material, man power employed, consumables
like cutting tools, emery paper, cloths, , hire charges of machineries, tools & tackles, grease, mobil etc including carriage loading & unloading as per
direction of Engineer in charge.
(a) Up to length 3.0 Meter | 92.52 | KG | 179.96 | ₹16,649.9 |
| 6 | Painting of Gates of Distributory/Branch/Minor canal/ Pump Coloum pipe/Pump Discharge Pipe & other similar components on prepared surfaces with one coats of zinc phosphate primer (airless spray preferred) 50microns/coat and one coal tar epoxy, 150 microns/coat including cost of all materials,
labour, scaffolding etc., complete with all leads and all lifts. | 4.91 | SQM | 201.41 | ₹988.92 |
| 7 | Supplying, fifling & fixing of M.S fabricated pedestal stool of suitable size, consisting of bottom plate, top plate, four nos legs etc febricated with suitable sizes m.s plate, m.s angle conforming to I.S 2062 of latest revision and as per approved drawing & direction of Engineer in charge. The cost includes cost of
materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, gas, oxygen, welding rod, anchor bolt of
required size, hire charges of machineries, like gas cutting set, welding set, tools & tackles etc including carriage loading & unloading. | 154.1 | KG | 165.66 | ₹25,528.21 |
| 8 | Supplying, fifling & fixing of C.I wheel in the screw hoisting system for lifting or lowering the draw shutter.The wheel consisting of suitable size hub to accomodate any size of G.M/C.I nut, rim dia 32mm and four nos arm made of minor dia 30mm. & major dia 36mm rod complete or as per approved drawing & direction of the Engineer-in-charge.The cost includes cost of materials, man power employed for dismantling and fitting fixing, consumables like cutting tools, welding rod, hire charges of machineries, like lathe machine, grinding machine, tools & tackles etc including carriage loading & unloading.
(a) Upto 60 cm. dia. Cast Iron wheel | 99.36 | KG | 171.62 | ₹17,052.16 |
| 9 | Earthwork from borrow pits over existing embankment or for repairs to embankment, closing breaches etc. within an initial lead of 30 metre and lift of 1.50 metre including breaking clods and depositing the same in layers not exceeding 25 cm. and rough dressing etc. complete as per profile | 648 | CUM | 96.54 | ₹62,557.92 |
| 10 | Cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by
Engineer-in-charge | 401.7 | CUM | 5.96 | ₹2,394.13 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
cancelled_1.pdf
pdf • 0.56 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.41 MB
Tendernotice_2.pdf
PDF • 0.55 MB
BOQ_2518149.xls
BOQ • 0.35 MB
date.pdf
PDF • 0.37 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .