SPECIAL REPAIRS TO SEWAGE LINES AND DRAINS OF NO 02 OFFICERS MESS AT CHAF BANGALORE

Amount

Demolition of plain cement concrete of any description and in any position all as specified and directed.

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for

Demolition of brick work/stone boulder masonry , built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etc.

Demolition and breaking up drain pipes of internal dia 250mm (salt glazed ware, AC or reinforced concrete ) set in cement mortar.

Demolition and breaking up drain pipes of internal dia 200mm (salt glazed ware, AC or reinforced concrete ) set in cement mortar.

Demolition and breaking up drain pipes of internal dia 150mm (salt glazed ware, AC or reinforced concrete ) set in cement mortar.

Demolition and breaking up drain pipes of internal dia 100mm (salt glazed ware, AC, PVC or reinforced concrete ) set in cement mortar.

Cutting in to existing man holes for connecting new drains for internal dia of pipe 250mm, making good to pipe and rendering, cutting out existingbenching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as directed.

Cutting in to existing man holes for connecting new drains for internal dia of pipe 200mm, making good to pipe and rendering, cutting out existingbenching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as directed.

Cutting in to existing man holes for connecting new drains for internal dia of pipe 150mm, making good to pipe and rendering, cutting out existingbenching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required complete all as directed.

Excavation in trenches not exceeding 1.5 meters wide and not exc 1.5 meters in depth and getting out in hard/dense soil including cutting of roots any dia all as specified and directed.

Excavation in trenches not exceeding 1.5 meters wide and depth exceeding 1.5 meters and not exceeding 3 meters and getting out in hard/dense soil all as specified and directed.

Returning filling in including spreading, levelling, watering well ramming in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material to a distance not exceeding 50 meters and deposited where directed at level not exceeding 1.5 meters above the starting point.

M&L for plain cement concrete 1:4:8, type D-2 using 40 mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping bed plates, water trough and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work and finishing the surfaces even and smooth without using extra cement all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in benching, channels and the like including use of necessary moulds, etc. and finishing the surfaces even and smooth with using extra cement all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs and the like, set in cement mortar 1:6 with plain fair faces complete with joints to match all as specified and as directed.

S&F High strength, deformed steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia all as specified.

M&L for rendering in cement mortar 1:4, 15mm thick on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to 100mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to 200mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in bed to 250mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

S&F salt glazed stone ware drain pipes 100mm internal dia, grade `A' laid in trenches and jointed as specified.

S&F 150mm bore Reinforced cement concrete pipes, class NP 3, laid and jointed complete with collars all as specified and as directed.

S&F 200mm bore Reinforced cement concrete pipes, class NP 3, laid and jointed complete with collars all as specified and as directed.

S&F 250mm bore Reinforced cement concrete pipes, class NP 3, laid and jointed complete with collars all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks,in PCC 1:3:6 Type C1 (20mm graded aggregate) exc. 10 cm in width and setting in mortar1:6 complete all as specified and as directed

S&F in repairs PVC (SWR) pipe 110mm bore in any length with rubber joints, laid in trenches or in floor/walls complete all as directed.

M/s STAR ELECTRICALS

m/s raghavendra kulkarni

M/s BHOOMI ELECTRICALS