Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.7 LAccepted-Finance | L1 | Accepted-Finance Lowest quoted | |
| 2 | L2₹4.8 L+₹12,270 (2.63%)Rejected-Finance | L2 | Rejected-Finance Highest quoted |
Tender Value
₹5.6 L
EMD Value
₹5,600
Closing Date
21 Jan 2025, 3:00 pmClosed
THE COMMISSIONER, SALEM CITY MUNICIPAL CORPORATION
Salem City Municipal Corporation, Fort Main Road, Salem.
Attending Repair, Replacing and Servicing of FCMA Soft Starter Panel 136KW, Fully Automatic Air Break Auto Transformer Starter, LT Control Panel Cubicle Type and Capacitor Panel boards at Ammapet Pumping Station Dedicated Water Supply Scheme in SCMC
2025_MAWS_518562_1
E2-EST NO-434-WS-2024-2025
Open Tender
Civil Works
Lump-sum
15 days
SALEM CITY MUNICIPAL CORPORATION
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹5,600
12 Feb 2025
13 Jan 2025
21 Jan 2025
13 Jan 2025
21 Jan 2025
13 Jan 2025
Amount
Charges towards Repair, Replacement & Servicing of fully automatic air break auto transformer starter with single phasing preventer with ammeter with auto restart facility for 40HP pumps for LT 136 to 160 KW including load trial run at rated voltage on grounded bed stimulating the site condition and measuring both electrical & Mechanical parameters including cost of all at site etc., complete as per specification as directed by the Departmental Engineers.
40HP ATS Panel Board
Supply and Installation of Flex compensated magnetic amplifier soft starter panel complete with all electrical equipment’s for 180 HP pump for LT squirrel cage motor 136 to 160 KW including load trial run at rated voltage on grounded bed stimulating the site condition and measuring both electrical & Mechanical parameters including cost of all at site etc., complete as per specification as directed by the Departmental Engineers.
180 HP 132KW Soft Starter Penel Board
Charges towards Repair, Replacement & Servicing of LT Control Panel floor mounted cubicle type made of 14SWG sheet steel fabrication consisting of the following ACB 800Amps with CT relay, MCCB TPN – 2no. of 400 Amps with relay star delta starter and interlocking for 180Hp. MCCB TPN – 2no. of 80 Amps with relay star delta starter and interlocking for 40Hp, MCCB TPN -63 Amp for capacitor - 4, Ammeter -5, Voltmeter -3, Power factor meter -1, Pilot lamps, Bus bar etc., including cost of all at site etc complete as per specification as directed by departmental engineer.
Charges towards Repair, Replacement & Servicing of capacitor panel consisting of 75 KVAR capacity with eight stages for 180 & 40 HP motor, with protection relay for capacitor equipped with automatic power factor control unit complete with cable switches etc including cost of all at site etc., complete as per specification as directed by the Departmental Engineers.
Supply and delivery of Mixed DI-Electric Capacitor with Accessories including banking conforming to IS 2834
Jointing of LT Cables 3.5 Core 11KV Grade Armoured Aluminium Conductor Cable Conforming to IS 1554 Part I and As Amended there after with ISI Marking
400Sq.mm 3.5Core
Cable Laying below GL including earth work
240 to 400 sq.mm
Supply and delivery of DI D / F (Soft Seated) resilient seated soft sealing Gate Valves (Sluice Valves / Scour Valves) as per following sizes with body bonnet of ductile cast iron of grade GGG 40, wedge fully rubber lined with EDPM, replaceable spindle nut, without gland packing and with 3 O-ring protection on the shaft and seals of NBR and with replaceable stem nut and the valves should be of vacuum tight and 100 % leak proof with face to face dimensions as per BS 5163 - 89 / IS 14846 - 2000 / DIN 3202 F4. All the valves should be with Electrostatice powder coating both inside and outside pocket less less straight thro body passage. All the valves are to be compatible for buried application with pressure rating PN 16 including all cost and conveyance.etc complete. As per standard specification
Towards labour Charges for Erection of Sluice Valves and necessary Specials etc., complete.
Supply and fixing of single box type 4'x18w crystal glass LED Tube light with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting
Charges for Epoxy Painting the Existing MS Pumping Main in Ammapet Pump House including removing old paint and Applied Epoxy paint dry film minimum thickness (DFT)as per Annex - B of IS 3589:2001 including all cost and labour ect completed.
Removal and Replacement of Damaged 1.1 KV grade 3.5 core 150 sqmm PVC insulated Armoured Aluminium cable including cost of jointing ket and Labour etc., Completed
M S R Construction (BID ID -1234965)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .